Used Tunnel Furnace for sale (1,756)

Condition: used, Year of construction: 2021, Electrically heated, twin-track tunnel furnace (push furnace) for debinding and sintering of PTC ceramics, manufacturer Riedhammer, type TP12.75/2X20/15-E-145, serial number R5-11-0040, order number RME-21-002610, year of manufacture 2022; usable volume approx. 0.6 m³, furnace length 12.75 m, usable width 2 × 200 mm, usable height 150 mm; maximum operating temperature 1,470 °C, including debinding up to 650 °C and sintering process up to 1,450 °C; electrical heating using Kanthal wire heating elements and SiC heating elements, maximum heating power 360 kW; 19 control zones, 19 load transformers; conveyor plate system with 126 conveyor plates in the furnace, plate dimensions 202 × 202 mm; conveyor speed 126–450 mm/h, furnace cycle time approx. 9–31.7 hours; measuring and control system, electrical connection value 659 kVA, 400 V, 50 Hz, pre-fuse 3 × 400 A; including handling system, manufacturer Theilinger, year of manufacture 2020, machine platform and control cabinets; noise emission below 80 dB(A). Chsdpfx Abs Ah Tipoasd

Year of construction: 2020, condition: like new (used), functionality: fully functional, conveyor belt length: 95,000 mm, Tunnel Type Enamel Cooking Ovens are based on the principle of hanging the workpiece to be fired on the oven conveyor and firing at maximum 1200C. These types of furnaces are internally rotating furnaces, after the workpiece is hung on the conveyor (maximum gross output 1 000 kg/h), it is provided to be fired (firing zone 10meters) or dried while traveling at a certain speed according to the thickness and m2 area of the part. Tunnel Type Enamel Cooking and Drying Ovens are specially designed with our expert engineering staff. Our Tunnel Type Enamel Cooking and Drying Ovens are also manufactured as assembled. Thanks to this feature, it can be easily assembled and moved to other areas if desired. In the industry, it is preferred by high-capacity production enterprises. Chedpevcdr Djfx Abajd

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Chjdsyf Hlijpfx Abaed Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, total length: 2,200 mm, total height: 1,230 mm, total width: 1,400 mm, type of input current: three-phase, product height (max.): 180 mm, product height (min.): 10 mm, product length (min.): 200 mm, product length (max.): 1,000 mm, product width (max.): 630 mm, product width (min.): 200 mm, input voltage: 400 V, compressed air connection: 6 bar, input frequency: 50 Hz, energy consumption: 21 kWh, feed rate X-axis: 26 m/min, workpiece weight (max.): 10 kg, For sale is an AMTEC film packaging system, consisting of a vertical angle sealing machine SPEEDshrink 40XXL PRO and a high-speed POF-XL shrink tunnel. Cjdpfx Abs Ah Hvloaohd The system was factory-adapted for larger products and product weights up to 10 kg. The enlarged sealing frame and the reinforced conveyor drive enable the packaging of products up to 1,000 mm in length. Technical data and features: -Product dimensions according to special design: Length 200–1,000 mm, Width 200–630 mm, Height 10–180 mm -Sealing frame: 1,200 × 700 mm -Product weight: up to 10 kg -Conveyor speed: up to 26 m/min -Additional frequency converter for speed control of the conveyor belts -Stable four-column guide for the vertical sealing frame -Height and pressure of the sealing frame adjustable -Adjustable perforation module -Compressed air requirement: 6 bar -Connection power angle sealing machine: approx. 4 kW Shrink tunnel POF-XL High-Speed PRO: -For processing POF shrink film -Double air circulation with adjustable airflow -Tunnel dimensions: approx. 1,700 × 790 × 350 mm (L × W × H) -External dimensions: approx. 2,200 × 1,400 × 1,230 mm (L × W × H) -Electrical connection according to documentation: 380 V, 21 kW The machine is in good, fully functional condition and has been used only sparingly. The machine is ready for operation and can be inspected and demonstrated under power after prior appointment. A trial run is possible after consultation. If you are interested, we look forward to receiving your inquiry.

Condition: excellent (used), J4 tunnel oven from year 2012, disassembled and ready for shipment. For more information, please send an email. Cedow Elytopfx Abashd

Year of construction: 2017, operating hours: 100 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 7250, For sale: OctoFrost 6/2RH freezing tunnel – practically new, available immediately! Are you looking for a solution to quickly increase production capacity without waiting months for a new machine? We have a unique offer for you. We offer an OctoFrost 6/2RH freezing tunnel – an extended version, which has only operated for 100 hours. The unit is in practically factory condition, has been professionally disassembled, is located in our warehouse, and is ready for immediate installation. Technical parameters: ✅ Manufacturer: OctoFrost ✅ Model: 6/2RH ✅ Version: extended ✅ Dimensions: 7100 × 3000 × 3000 mm ✅ Operating time: only 100 operating hours ✅ Refrigerant: ammonia (NH₃) ✅ Refrigeration system: pump system Product Performance Peas up to 3,600 kg/h Corn up to 3,200 kg/h Green beans up to 3,000 kg/h Carrots (diced) up to 3,000 kg/h Broccoli up to 2,700 kg/h Cauliflower up to 2,500 kg/h Strawberries up to 2,520 kg/h Raspberries up to 2,000 kg/h Blueberries up to 2,700 kg/h Cherries up to 2,600 kg/h Peppers (diced) up to 2,500 kg/h Mushrooms up to 2,600 kg/h Potatoes/fries up to 1,800 kg/h Meat (20 mm cubes) up to 2,340 kg/h Fish/seafood up to 2,300–2,500 kg/h Shrimp up to 2,300 kg/h The price includes a complete set: ✔ OctoFrost 6/2RH freezing tunnel ✔ Feeder ✔ Vibrator ✔ AUMA Somas valve station ✔ Control cabinet 💶 Price: 320,000 EUR – a complete, ready-to-install solution. Why is it worth it? ✔ practically new machine at a price significantly lower than a new device, ✔ immediate availability – without a long waiting time for production, ✔ proven OctoFrost technology, valued worldwide for its high IQF freezing quality, gentle handling of the product, and reliability, ✔ ideal solution for facilities planning to increase production capacity or modernize their lines. 🔧 We provide a start-up guarantee. Additionally, we offer the possibility of comprehensive connection, commissioning, and technical support by our company, NGS Serwis. This way, you receive not only the equipment but also professional installation and the assurance of trouble-free production start-up. Chodpfx Aszucihebaod If you are looking for a premium-class IQF tunnel that is practically new, fully equipped, and available immediately, this offer is a unique opportunity. Please contact us via private message or email to obtain a detailed specification, additional photos, and to arrange a demonstration of the equipment.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 27.15.494, functionality: fully functional, input voltage: 380 V, input current: 630 A, input frequency: 50 Hz, overall weight: 100 kg, Equipment: CE marking, 5M Tandem furnace (inductional) 500 kg capacity Chjdpfxozqclhj Abasd Suitable for smelting copper, aluminium, iron, cast iron. It is equipped with a Jet plus dust filter, so there is no ecologically harmful pollution, and 98-99% of the materials are regained as powder. It is equipped with external cooling. The furnace is fully automated, smelting is continuous.

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system. The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components. Refurbishment work includes the replacement of: - Heating elements - Ceramic rollers - Electric motors - Automation and control systems - Electronic components The furnace has been fully refurbished and prepared for further industrial operation. Warranty: 12 months. ### Main Technical Specifications - Manufacturer: NorthGlass (China) - Model: BU1E60 - Condition: Used, fully refurbished - Maximum glass size: 2,850 × 6,000 mm - Minimum glass size: 300 × 300 mm - Glass thickness: 5–22 mm - Heating system: Forced convection - Convection system: 6 high-temperature upper convection fans with variable frequency control - Production capacity: 16–18 batches/hour (5 mm clear glass) - Heating power: 1,143 kW - Quenching fan power: 2 × 220 kW - Rated electrical capacity: 1,100 kVA - Minimum Low-E emissivity: ε = 0.04 - Quality standard: GB15763.2-2005 ### Supported Glass Types - Clear float glass - Low-E coated glass - Patterned glass - Body-tinted glass ### Equipment Configuration The furnace includes: - Loading table - Heating section - Flat glass quenching section - Unloading table - Electrical control system - Frequency converters - Air circulation system - Quenching fans with vibration isolation frames ### Key Advantages - Fully refurbished with replacement of major components - Advanced forced convection heating technology - Suitable for processing Low-E glass - Large processing capacity of up to 2,850 × 6,000 mm - High productivity of up to 18 batches per hour - 12-month warranty Csdpfx Abez Rv Dpjaehd - Cost-effective alternative to purchasing a new glass tempering furnace ### Price and Delivery Price: Upon request Delivery terms and additional technical information are available upon request. Contact us for a detailed quotation, additional photographs, videos, and technical documentation.

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Csdpsz Dhm Uofx Abaohd

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 8445, functionality: fully functional, operating hours: 3,000 h, power: 80 kW (108.77 HP), input voltage: 380 V, input current: 126 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 750 °C, inner dimension height: 1,000 mm, total height: 4,425 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, documentation/manual, We offer this Rohde SG 80/120 nitriding furnace, which is new and manufactured in 2024. Manufacturer: Rohde Schutzgasofen GmbH Chedjzuabzspfx Abajd Model: SG 80/120 Year of manufacture: 2024 Condition: As new Category ID: 34 Type ID: 4293 Type: Nitriding furnace If you have any questions or need further information, please do not hesitate to send us a message or contact us by phone.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15-35-19-01, total length: 29,011 mm, total width: 1,995 mm, total height: 1,250 mm, input voltage: 400 V, Equipment: documentation/manual, The device is in working condition, but it is currently out of service and stored in a dry and warm area. It can be started upon prior arrangement. Cedpfx Abs Af Ng Nsashd All technical documentation and the CE declaration are included. A detailed description with specifications can be found in the attached .pdf documents. The maximum working height (height of the cooled material) is 6 cm.

Condition: new, Year of construction: 2025, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, total length: 3,000 mm, total width: 500 mm, total height: 1,300 mm, overall weight: 500 kg, Equipment: CE marking, documentation/manual, For sale is a new and unused HASUNG HS-1139 annealing tunnel furnace / continuous furnace for the professional processing of gold, silver, and other metals or precious metals. The system was originally purchased for our own production of silver bars. It was intended primarily for the continuous annealing or soft annealing of silver bars during the production process. According to the manufacturer's specifications, the tunnel furnace can also be used for the heat treatment of other metals and precious metals, such as gold. The machine was purchased directly from the manufacturer, Shenzhen Hasung Precious Metals Equipment Technology Co., Ltd., and imported to Austria. It was part of a newly acquired production line but was never put into operation by us and has 0 operating hours. The sale is taking place because, after purchasing the system, we decided against the intended production process using a protective gas. The HS-1139 operates as a continuous tunnel furnace. The workpieces are fed through the tunnel furnace via a mesh/conveyor belt. The conveyor speed can be adjusted to the respective production process via a frequency inverter. According to the operating manual, the electric heating reaches a temperature of up to 850 °C. In addition, the system has a protective gas system with ammonia decomposition and a circulating water cooling system. Technical data: Manufacturer: HASUNG Model: HS-1139 Machine type: Annealing tunnel furnace / continuous furnace Application: Annealing / soft annealing of metals and precious metals Suitable for, among others: Silver, gold, and other metals Condition: New and unused Operating hours: 0 h Power: 12 kW Voltage: 380 V Csdoz Dfy Espfx Abaohd Frequency: 50/60 Hz Power supply: 3-phase / AC Max. temperature: 850 °C Dimensions: approx. 3,000 × 500 × 1,300 mm Weight: approx. 500 kg Conveyor system: continuous mesh/conveyor belt Belt speed: adjustable via frequency inverter Cooling: circulating water system Protective gas system: ammonia gas with ammonia decomposition Control: temperature control, frequency control and timer function Documentation and CE documents are available. The existing operating manual and the associated CE documents, including the Certificate of Conformity and test report for the model series, including the HS-1139, will be provided with the machine. The machine is located in Lower Austria, Austria, and is currently not connected. An inspection is possible by arrangement. Collection is preferred. Loading or shipment transport can be arranged upon request. Sale due to a change in our production process.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 2016/2017, total length: 2,500 mm, total height: 1,500 mm, total width: 1,800 mm, product height (max.): 360 mm, product length (max.): 1,000 mm, product width (max.): 500 mm, working height: 900 mm, width of welding knife: 700 mm, passage height: 360 mm, overall weight: 1,270 kg, passage width: 700 mm, table width: 700 mm, year of last overhaul: 2025, transport length: 2,500 mm, Equipment: documentation/manual, The packaging system with a welding tunnel has been in continuous use in and at the industrial laundry for 10 years. The system has been regularly maintained by the supplier, CLARUS AG. According to the technical specifications, the maximum output is 3,000 packages per hour. (We have produced an average of approximately 1,500 laundry packages per day.) The angle welding system will be replaced by a cluster welding system, as this technology is better suited for laundry packaging. The system will be taken out of service in mid-November. Chedpoz Rvd Ajfx Abasd

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS Chsdpezfyu Asfx Abajd The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: like new (used), Year of construction: 2008, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23477, workpiece weight (max.): 550 kg, total width: 1,300 mm, total length: 1,150 mm, total height: 2,800 mm, power: 12 kW (16.32 HP), input voltage: 400 V, usable tank capacity: 150 l, We offer this almost unused Rohde electric chamber furnace, model KEU 150 N SoB, manufactured in 2008. Cjdpsz Ehi Ejfx Abajhd Manufacturer: Rohde Type: Electric chamber furnace KEU 150 N SoB Year of manufacture: 2008 Maximum temperature: 650 °C High-quality programmable control system Bentrop Thermocomputer TC 507 Neatly arranged control cabinet No visible signs of corrosion or thermal damage Industrial special version with extraction/air guidance Complete documentation If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1990, operating hours: 16,400 h, AICHELIN ROTARY FURNACE WITH HESS PRESS AND WASHING MACHINE description: Rotary hearth furnace AichelinModel: RDLGs-R-SJ-1,5m. Year: 1990 External dimensions: 2460 x 2460 x 2335mm Operation: Gas fired with 4 Rekumat self-recovery radiant tube burners. Consumption electrical connection: Connection voltage 380V/50Hz Control voltage 220V/50Hz Total nominal consumption 15Kva Nominal consumption motors 11,7Kva Max. temperature: 950º Cycle time approx. 50 seconds. Hess PressModel : HP 1-48 Year : 1990 Outside dimensions : 1830 x 1650 x 2630mm Empty Weight: 3000kg Max Cooling Unit: 230kg of SteelMax Chsdpfxsnzhx He Abaod Workpiece Size: Approximately 210mm Caber Washing MachineModel: 350 T Year: 1990 Outer dimensions: 7100 x 1470 x 2700mm Unladen weight: 4000kg Loading height: 1180mm

Condition: excellent (used), functionality: fully functional, total height: 2,175 mm, total length: 13,670 mm, total width: 2,050 mm, The CES CO2 cryogenic tunnel is a high-performance solution for rapid product freezing in industrial environments. Thanks to its use of carbon dioxide, this tunnel provides rapid, efficient cooling, ensuring that food quality and properties are preserved. In fact, it is designed to guarantee uniform freezing while reducing moisture loss. What's more, the CO2 CES cryogenic tunnel stands out for its ability to handle large volumes of product, making it an ideal choice for large-scale operations. What's more, it offers flexibility of use, adapting to a variety of product types while ensuring a continuous workflow. Thanks to its cutting-edge technology, it enhances productivity while reducing energy costs, optimizing freezing processes in the food industry. In short, this machine represents a reliable and efficient solution to the demands of industries requiring rapid freezing, while guaranteeing rigorous compliance with quality and safety standards. Chsdpsu Iu U Djfx Abajd Technical specifications Cooling Dimensions: 13670 x 2050 x 2175 mm (L x W x H) Usable dimensions: 11960 x 1201 (L x W)

Condition: excellent (used), functionality: fully functional, mileage: 18,491 km, gearing type: hydrostat, fuel type: diesel, color: red, overall weight: 28,000 kg, empty load weight: 28,000 kg, tire condition: 80 %, drive condition: 80 %, axle configuration: 4x4, number of seats: 1, mast type: telescopic, suspension: parabolic leaf (spring), Year of construction: 2008, operating hours: 18,491 h, Equipment: additional headlights, adjustable chassis, air conditioning, all wheel drive, cabin, hammer hydraulics, hydraulics, onboard computer, parking heater, For sale: a 2008 JAMA SBU 8000, a specialized, self-propelled rock breaker designed for use in mines and tunnels. The machine is equipped with a boom and an Epiroc hydraulic hammer, used for removing loose rock fragments from the roof and walls and preparing the excavation for further work. A significant advantage is the ability to operate using an internal combustion engine or external electrical power. When connected to a suitable electrical grid, the working unit can operate with the diesel engine turned off. This allows for rock breaking without emissions from the machine's engine in the workplace, a particularly beneficial solution in tunnels and enclosed underground excavations. Additionally, the machine has a compressor mounted in the rear. MACHINE SPECIFICATIONS • Make and model: JAMA SBU 8000 • Year of manufacture: 2008 • Serial number: 8018 • Weight according to nameplate: 28,000 kg • Working equipment: Epiroc hydraulic hammer • External electrical power: 1000 V • CE marking INTERNAL COMBUSTION ENGINE – DEUTZ The machine is equipped with a Deutz TCD 2013 L06 2V six-cylinder industrial engine. This is a turbocharged diesel engine with liquid cooling and intercooling, designed for use in heavy-duty construction machinery. • Model: Deutz TCD 2013 L06 2V • Type: four-stroke diesel engine • Cylinder arrangement: inline, 6-cylinder Codpfxo Afihis Abaohd • Displacement: 7146 cm³ / approximately 7.15 l • Rated power according to the engine nameplate: 200 kW / approximately 272 hp • Rated speed: 2300 rpm • Turbocharging: turbocharger with intercooling • Fuel injection system: Common Rail • Cooling: liquid • Number of valves: 2 per cylinder • Cylinder bore × piston stroke: 108 × 130 mm • Electronic engine management • Unit labeled with Deutz Xchange – manufacturer's engine exchange program OPERATION WITH ELECTRICAL POWER • Possibility of powering the working unit from an external electrical grid • Operation of the equipment with the internal combustion engine turned off • No emissions from the diesel engine during electrical operation • Cavotec cable reel • A solution particularly useful during long-term work in tunnels and underground excavations EQUIPMENT • Working boom with Epiroc hydraulic hammer • Compressor in the rear of the machine • Hydraulic stabilizing supports • Hydraulically controlled front blade • Enclosed operator cab • Control panels with emergency stop buttons • Presto fire suppression system • Hydraulic system for operating the boom and equipment The JAMA SBU 8000 is a machine for companies involved in tunnel construction, underground mining, and rock breaking. The combination of the Deutz engine, the ability to electrically power the working unit, and the Epiroc hammer allows you to adapt the method of operation to the conditions prevailing in the excavation. Please contact us for detailed information and to arrange a viewing.

Condition: like new (used), Year of construction: 2014, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 16238, total length: 12,600 mm, total height: 1,500 mm, total width: 1,475 mm, type of input current: three-phase, product height (max.): 200 mm, product height (min.): 80 mm, product length (min.): 80 mm, product length (max.): 200,000 mm, product width (max.): 450 mm, product width (min.): 14 mm, input voltage: 400,230 V, working height: 900 mm, overall weight: 1,900 kg, input frequency: 50 Hz, space requirement width: 3,000 mm, This machine was bought in 2015 and has only been installed, calibrated and tested. We have never been in commercial use. Has only been stored in our room temperated warehouse. We planned to use it for own production, but not all plans are realized. So this is a brand new packaging machine with roller conveyers and heat tunnel. All documentation is avaliable. The machine is located in Norway and can be inspected and tested here. Cjdpjzzybhofx Abaehd We paid € 70.000,- for this machin inclusive heat tunnel and roller conveyors in 2015

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm - Structure in AISI 304 stainless steel - Polypropylene conveyor belt driven by inverter - 3 Lowara pumps for water circulation - Steam heating with coil and automatic condensate discharge - Multi-stage cooling with spray water - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar - Adjustable cycle time from 55 to 240 minutes Chodeywuzwjpfx Abasd If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Chjdpfx Aszu Nvzebaod Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Condition: used, Year of construction: 2011, Industrial furnace for tempering flat glass, used in construction, for door and window glass, furniture glass, decorative glass, and certain types of coated glass. Manufacturer: SHANGHAI REFINE MACHINERY Type: RGT A-1530 Maximum glass size: 1500 x 3000 mm Minimum glass size: approx. 200 x 300 mm Glass thickness: 5-19 mm Output for 5 mm glass: approx. 16-18 cycles/hour Chedjzh Uyropfx Abaod Installed power: 500 kVA Compressed air pressure: >0.8 MPa Year of manufacture: 2011 Technical condition: used machine, requires technical inspection, condition as shown in the photos.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Cooling tunnel with air knives Total length: 3000 mm Usable width: 1300 mm The ventilation unit consists of: - Supply and recirculation fan: 3 kW; flow rate: 6000 m3/h Cede Afngwjpfx Abajhd - Exhaust fan: 1.5 kW; flow rate: 6000 m3/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Velocity at the air knife outlet: max. 32.5 m/sec Overall width: 1783 mm Clearance height: 80 mm Maximum tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Autonomous electrical control cabinet Machine control via LCD 5.7" touch control panel for complete management of the operating parameters Option to save and retrieve recipes TT 4000 slat conveyor with double chain, steel guides, and chrome-plated slats: Feed controlled by inverter-controlled reduction gearbox Length 4000 mm; speed max. 20 m/min; min. 2.1 m/min; installed electrical power: 0.75 kW; slat diameter: 25 mm; slat spacing: 114 mm

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Chedsz Ru Iyopfx Abaed Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: used, Hardening furnace, muffle furnace NABER type 31S Machine no. 10604, year of manufacture 1973 Temperature range: approx. 1150°C Internal dimensions (W x D x H): 1000 x 700 x 380 mm Cjds Agpf Nepfx Abaohd Heating power: 42 kW Connection voltage: 400 volts, 50 Hz - Simple temperature control - Control unit mounted on the furnace - One heating element is damaged Space requirement: Width 170 cm x Depth 200 cm x Height 200 cm Weight: 1550 kg Good condition