Hardening furnace, annealing furnace, muffle furnace, kiln NABER type N 50
Masch. No. 02810 built in 1981
Temperature range of Max 1200 ° C
Internal dimensions L x W x H 450 x 350 x 360 mm
Heating power 3.2 kW
Power supply 220 volt, 50 Hz, 14.5 amp
-Electronic temperature control Nabertherm B130 renewed in 2017
-Control of the furnace mounted
Dimensions L x W x H 800 x 800 x 1220 mm
Weight 115 kg
8eoffd2qh
good condition
more
Batch size ø 700 mm 1300 mm
1 control cabinet
1 gas station - complete renewed gas distribution station, 2015
1 oven electrically heated
1 cooling station
2 complete retorts with gas control cylinder cover
7lczcn8zw
very good condition - complete documentation
more
internal diameter 4200 mm
max. temperature 970 Grad
internal dimension 8600x4200x4220 mm
workpiece weight 120 t
Temperature range 550-970 °C
total power requirement 30 kW
weight of the machine ca. 25 t
Mt0urw
dimensions of the machine ca. 5x8,96,4,5 m
more
Hardening / tempering furnace / annealing furnace
Manufacturer: Heraeus
Type: KR 260
Temp. Max: 1,150 ° C
Performance. 8 kW
D0d9ni9pa
Calandria: approx. 140 x 240 x 480 mm (H x W x D)
Dimensions: approx. 1.600 x 800 x 850mm (H x W xT)
Year of construction: approx. Mid 60s
more
Electric hardness annealing furnace
Manufacturer Naber Lilienthal-Bremnen
Today-Nabertherm GmbH Germany
Model: 37 S
Year of manufacture: 1974 No. 11826
380 volts 21 KW
Temp. Up to approx. 1150 C °
3jrogg0uf
Opening size: Width: 500 mm -Height: 240 mm
Interior: 500 x 750 x 240 mm height
Overall dimensions approx.
Lg 1.85 m x b; 1.15 mxH: 1.8 m
Inclusive undercarriage
With temperature control (monentan not working) more
Hardening furnace, annealing furnace, muffle furnace, kiln Nagy type KLS 53/30/70
Masch. No. 13432 built in 1980
Temperature range of to 1100 ° C
Internal dimensions L x W x H 700 x 530 x 310 mm
Heating power 25 kW
Power supply 400 Volt, 50 Hz, 32 amp. Plug
-Electric temperature control with temperature pre-selection via Rotary
-Control of the furnace mounted
Dimensions L x W x H 1700 x 1650 x 1700 mm
Weight 800 kg
F3yasfb
more
DEGUSSA Gasnitrier hardness system ignition system
Short time nitriding system 2007 complete
ueberholterSteuerelektronik. (Protherm 500)
Commercial room dimensions ø 700 mm depth 1300 consisting:
Frx20ayn
1 x Control Panel
1 x gas station completely replaced by 2015
1 x oven
1xKuehlstation
2 x complete retort with gas control cylinder 2 x cover complete
very good condition - complete documentation available
more
Here we offer you a Nabertherm hardening furnace, annealing furnace, muffle furnace. Nabertherm hardening furnace, annealing furnace, muffle furnace Tmax 1200 C Inner dimensions in mm: Width 500mm, depth 750mm, height 250mm volume in liters: 80 liters External dimensions in mm: width 1140mm, depth 1900mm, height 1790mm Power consumption / kW: 20,0kW Electrical connection: 3-phase weight in kg: 820kg type: model N 81 delivery: (See picture) 2 weeks commissioning warranty we supply with Express Sh... more
Laboratory furnace with nominal temperature of 1,100 C type M110 mass outside width 58cm depth 71cm height 74cm combustion chamber dimensions: width 20cm depth 33cm height 14cm Power: 220V 2,9KW
R3qhgrvmp
more
max. working temperature: 1100ºC
el. heating power: 60 kW
treatment type: annealing after deformation
throughput max.: 190 kg/h
useable band width: 340 mm
useable hight: 150 mm
cycle time: 5 - 50 min.
heating chamber (lx w x h): 2380 x 550 x 512 mm
heating and control zones: 3
Civ2h9w3
protective gases: N2 / H2
PLC: Siemens S7
more
Annealing furnace for brass and copper EBNER Hicon / H2 type. HOg 140/200 Ms DK
Diameter of the coils: 1 400 mm
Vlqaugfwk
Maximum height: 2000 mm
Maximum weight of charge 3 000 kg
Usage temperature 250 to 700 c.
Maximum temperature 800 C.
more
Annealing furnace Fabr ALLINO type and year not apparent gas heated with modern lightweight insulation Specifications: Maximum temperature up to 1200 C passage mass width x height 1100 x 800 mm usable oven length 2000 mm per 3 gas burners on both sides Dimensions 3100 x 3200 x 3700 mm Transport mass B x D x H 2900 x 3200 x 3000 mm with - door openings front and rear - compl. electr. Establishment in sep standing cabinet - the corresponding fan blower used, from an operational resolution, from lo... more
Bogie hearth furnace annealing furnace industrial oven baking oven Unfortunately, no nameplate, and no records are available. Does anyone know this stove request for data. Cabin size: LxWxH:. 2500 x 950 x 600 mm incl cabinet All connections are labeled in the breakdown. Dimensions: 3110 x 2300 x furnace 2300 mm (depth x width x height) cabinet 1000 x 600 x 2000 mm (depth x width x height) Weight 6000 kg of the furnace comes from a current production and is in good condition. The oven can be con ... more
A tilting furnace of the company SOLO, Switzerland. Max. Temperature 1050 C 3 * 380 V, 50 Hz. Power 3,5 KW. Annealing chamber: (B, H, T) 155 * 70 * 520 mm dimensions plant: 160 * 86 * 160 cm to glow under a protective gas and pour in water. Suitable for both precious metals as well as base metals. The furnace was in operation until the end and is technically sound. The oven does not have a splitter.
Ukrrrnhyd
more
2002 Steering completely modernisiert.2005 Heating - masonry completely renewed. Chargengösse L-2000mm 1500mm H-B-1000 - 1200mm / charge weight 8,000kg space heater L-4400 B-2000mm H 4300mm / 2000mm Weight 5.000kg cabinet B-H-2100mm 400mm T-1050 temperature 3x480V 50Hz The system is under power and may at any time be visited by appointment.
Vemabnkr
more
Oven temperature max.: 1000C, heater length: 500mm, cooler length: 1000mm, conveyor belt width: 95mm, conveyor belt speed: 15-500mm/min, with Ammonia fission system Kohnle Wokop GSP 12 FA.
Ckg00o2gu more
Underground heat treatment furnaces (annealing and tempering)
Heating medium: gas
Equipment description: underground heat treatment furnaces which consisting of oven and pots
Number of oven: 5 pieces
Number of pots: 8 pieces
Pots volume: 1600 l
Pots dimensions: Ø1600 x 21000 mm
Oven dimensions: Ø2500 x 2360 mm
Eenoo0m
Electrical cabinet
Centrifugal fan 5 pieces
The line consist of 5 oven, pipe installation, centrifugal fan and the other included equipment like valves, temperature p... more
A tilting furnace of the company SOLO, Switzerland. Max. Temperature 1050 C 3 * 380 V, 50 Hz. Power 5 KW. Annealing chamber: (B, H, T) 160 * 60 * 440 mm Dimensions unit: 80 * 90 * 160 cm to glow under a protective gas and pour in water. Suitable for both precious metals as well as base metals. The furnace was in operation until the end and is technically sound. The oven does not have a splitter.
Ukrmpjids
more
Furnace for production annealed (burned-heated) wire– brand name Lamnea Bruk (Sweden), powered with electrical energy, power 90 kW, vacuum pump (air compressor) brand name Leybold-Heraeus (Germany), electrical cabinet, 2 insertion drums. Capacity – 2 hours for 2 ton of wire(1 insertion drum). Working temperature – 800-850 Celsius.
Ry7p2m09q more
A tilting furnace of the company SOLO, Switzerland. Max. Temperature 950 C 3 * 380 V, 50 Hz. Power 3 KW. Annealing chamber: (B, H, T) 85 * 40 * 340 mm Dimensions unit: 56 * 80 * 155 cm to glow under a protective gas and pour in water. Suitable for both precious metals as well as base metals. The furnace was in operation until the end and is technically sound. The oven does not have a splitter.
Lvmsn
more
The furnace was rebuilt from a furnace into a wire annealing furnace.
Heating power 3.5 KW to 1000 ° C
L9w3x
Ammonia spalter installed 1.8 KW to 950 ° C
The furnace is working properly.
If necessary, we have a wire unwinding and wire-winding device. more
Mainly consists of:
- 2x3 t furnace body with furnace lid, hydr. tilting chair and hydr. cylinders
9rnwkd7cq
- Inverter 2400 kW 250 Hz - DICU control and capacitors
- Control and hydr. panel
- Hydr. power pack
- 3-ph.-oil transformer 2900 kVA, 20 kV
- water recooling unit (primary section)
- techn. documentation
Incl. dismantling, as seen, ex works
more
max. temperature 1000 Grad
size of opening 170 x 90 mm
Bygt88st
depth of chamber 300 mm
volume 3,8 L
voltage 380 V
total power requirement 3,0 kW
weight of the machine ca. 60 kg
dimensions of the machine ca. 0,60 x 0,70 x 0,75 m
S/N: 2358
more
temperature max. 1.150 °
muffle size (length) 400 mm
muffle size (width) 250 mm
muffle size (depth) 250 mm
total power requirement 450 x 350 kW
Dsht30h
range L-W-H 750 x 1.000 x 1.400 mm
more
Producer: Nabertherm
Type: N60/85HA
YOM: 2001 / used
with Air circulation
Control: Program Controller C40
Max. Temperature: 850 °C
Power: 9,0 kW
Voltage: 400 V
Internal Volume: ca. 400 x 630 x 400 mm
Space Requirement of the Machine (LxWxH): ca. 920 x 1.260 x 1.400 mm
Weight: ca. 180 kg
Wlqsw
Additional information:
• Digital Control
• Operating Manual included
more
degree: 50
depth: 450 mm
diameter: 100 mm
connection electric: 220 / 2 V/A
S8u8ixvhb
weight of the machine approx.: 10 kg
space requirements approx. LxWxH: 250x250x650 m
electrodes dryer
functional more
max. temperature 700 Grad
size of opening 200 mm
depth of chamber 300 mm
total power requirement 3 kW
3ywsqybma
weight of the machine ca. 100 kg
dimensions of the machine ca. 0,5x0,7x0,5 m
Mechanic: good
Optical condition: normal and cleaned
Machine is functionally tested!
more
Capacity: 1000 kW
Mainly consists of:
- furnace body with inductor and hydraulic tilt with hydr. cylinder
- hydraulic powerpack and control desk
- 2-phase-step-transformer 1100 KV; input: 10 kV / output 925...140 V
9jnazorfi
- electr. switch-board and panel
- water re-cooling plant but without cooling tower
- incl. spare parts
more
max. temperature 1200 Grad
Crlayfvo
size of opening 350 x 250 mm
depth of chamber 800 mm
volume 65 L
voltage 400 V
total power requirement 20 kW
weight of the machine ca. 330 kg
dimensions of the machine ca. 0,85 x 1,40 x 1,40 m
Fab. No.: 15925
- Control: TR 305
more
All data on this stove will be published shortly on this platform.
This is a gas plants continuous furnace.
8yocbiwxm
Application date: preheating for works.
more
Number 27-01-162
Manufacturer LAC
Type SV 3300-25
Machine data
Construction year: CA 2010
L x W x h: approx. 2000 x 2900 x 2500 mm
Weight: approx. 1400 kg
Like new condition price: €18500
Technical data
Low-temperature - Luftumwaelz oven
Maximum temperature: approx. 250 degrees
Internal dimensions:
Width: 1100 mm
Depth: approx. 1500 mm
Height: approx. 2000 mm
Connection value: approx. 24 kW
Bzwbeyps
Air quantity: approx. 2000 m ³/h
Loading weight: 800 kg
Ac... more
HERAEUS event oven
Type RL 320
Fabr.Nr. 3501 power rating of 4,5 kW voltage 380 V 7 amp.
Vplws
Maximum temperature 650 c.
Heat transfer: Convection
Commercial room dimensions: D = 320 mm depth 450 mm external dimensions: B x H x T 640 x 1560 x 920 mm weight: 100 kg
Application: Verfgueten of light-metal parts have hardened steel parts,
for an intense and uniform warming up of workpieces
No sales to private
The sale is carried out only to entrepreneurs in the sense of § 14 BGB... more
max. temperature 1100 Grad
size of opening 220 x 220 mm
depth of chamber 420 mm
G0riybn
volume 14,5 L
voltage 400 V
total power requirement 3,5 kW
weight of the machine ca. 75 kg
dimensions of the machine ca. 0,80 x 0,90 x 0,70 m
- [...]: 8300414
more
Size: L550 x W 500 x D 500 mm
External dimensions: L950 x B700 x T1000 mm
Power: 6 kW plus fan motor 0.5 kW
for temperatures up to 450 ° C
Bszqorco
more
Offered here is an Industrial furnace of the manufacturer Nabertherm Naber Industrieofenbau
Manufacturer: Nabertherm Naber Industrieofenbau
Type: N41 / H
Year of construction: 1982
Power: 15 kW
Tmax: 1260 ° C
Internal dimensions: 350x500x300 mm (LxWxH)
Fzynms9
Overall dimensions: 1000x1350x700 mm (LxWxH)
For more information see also pictures
Sale with invoice. The VAT is issued on the invoice.
Visiting any time after prior appointment possible and desired.
Since used goods are not a guarantee ... more
1 gebr. Chamber furnace make: Heraeus - KR 260 EHeizplatten with spirals -, door stone replacement - NEUOfen was the service re-evaluated! with an electronic controller, timer, Grenztemeraturschutz, nominal temperature: 1150 ° nominal power: 8 kWAnheizzeit on 1150°: 120 minNutzraummasse: WxHxD - 260 x 160 450 mmAussenmasse: WxHxD - 770 x 1400 x 920 mm: 160 kg
Cvxdey0u
more
Mainly consists of:
- furnace body with inductor and tilting chair with hydr. cylinder
- hydraulic unit with control desk
- three-phase-oil-stepdown-transformer 850 kVA
- 20.000 +/- 5 % / 180 …780 V / 8 steps
- transformer with fixed steps
- electr. switchboard and control panel
- without re-cooling plant
- spare inductor
9aa8gawsl
already dismantled more
new lining
Dskksx2t
Oil heating
Internal dimensions: Depth 1000mm, 640 mm H 400 mm, external T 1200 m x H1700 mm x W 2600 mm
maximum temperature 1200 ° C
more
Consisting of:
Furnace body with inductor 800kW, tilting system, 2 hydr. cylinder, hydraulic unit with control desk, three-phase-step-down-transformer; 850kVA; 10kV
electr. switch-board and panel
Cnueae0p
spare Inductor 800 kW
without water re-cooling plant
the furnace is in excellent condition
already dismantled
more
with hydraulic lid raising and crane system
The curing Chamber dimensions: depth 880 x D 700 mm
Dszhnrff
Outer dimensions D 1700 mm x 2400 x height 2100 mm
Cabinet: B1100 x D 600 x H 1850 mm
Connection value 42 kW, max temp: 650 ° C
more
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance.
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course occur anyway during the purchase process differences of opinion. Machineseeker and Thorsten Muschler GmbH is not liable for violations of the active Maschinensucher or Machineseeker buyer or seller.
Try our Machineseeker app now! Machineseeker app for iPhone and Android.
+44 (0) 20 806 810 84
+49 (0) 201 857 86 10
+48 (0) 223 076 958
