Used Sintering Furnace for sale (778)

Year of construction: 1990, condition: used, degree max 1800 Nwjdpergbyvofx Ah Hob total power requirement 5 kW

Condition: good (used), Hello, For sale: Chamber hardening furnace POK 73.1. The machine is fully operational and in continuous use, with the possibility of inspection and testing. The listed price is net and VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Njdoxykcajpfx Ah Hjwb Phone contact available from 7:00 to 16:00.

Year of construction: 2021, condition: used, max. temperature 1.280 °C Temperature range 900 - 1.280 °C Oven room ca. 350 x 500 x 250 mm Oven chamber volume ca. 40 L Loading height 900 mm weight approx. 260 kg Nodpfxex Urupo Ah Hewb External dimensions ca. 840 x 1.160 x 1.320 mm control Controller B 400 connected load frequency 400 V 3/N/PE 50Hz connected load 15,0 kW Electrically heated chamber annealing furnace with radiant heating Technical features & accessories: - Controller B 400 - Base frame - Temperature uniformity in the working temperature range +/- 10 K according to DIN 17052-1 in the empty working chamber Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of construction: 2021, condition: used, Carbolite GERO Carbolite GERO Muffle Furnace ELF 11/6B – 1100 °C – Year of manufacture: 2021 Product description For sale is a Carbolite GERO muffle furnace, type ELF 11/6B, equipped with a 301 temperature controller. The unit is in good used condition and originates from professional use. The furnace has been functionally tested and reaches the set temperature (see display on photos). Ideally suited for laboratories, industry, training, material testing, ceramics, metallurgy, or research. Technical data Manufacturer: Carbolite GERO Ltd. Model: ELF 11/6B Year of manufacture: 2021 Max. temperature: 1100 °C Usable volume: approx. 6 liters Nsdpex T A U Rjfx Ah Hswb Heating power: 2000 W Power supply: 230 V / 50–60 Hz Phases: 1 + N Rated current: approx. 9.7 A Temperature controller: Model 301 Country of origin: United Kingdom Certification: CE / UKCA Weight & dimensions External dimensions (W × D × H): approx. 420 × 530 × 615 mm Weight: approx. 40 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Year of construction: 2018, condition: used, functionality: fully functional, We are offering this used KGO MK 11-7-9.5 G chamber furnace, year of construction 2018. Manufacturer: KGO Model: MK 11-7-9.5 G Year of manufacture: 2018 Nwedpfx Aoyaq Rreh Hjb Condition: used Machine type: chamber furnace The chamber furnace was used for case hardening from 2019 to 2021 and has been idle, disconnected, in one of our plants since September 2021. Control system: Protherm PT500 If you have any questions or require further information, please feel free to contact us by message or phone.

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Equipment: CE marking, type plate available, Induction furnace for heating steel with dimensions up to 550mm in length, 100mm in width, and 20mm in thickness. The furnace is connected to a feeder for small rods with dimensions from 10x10 to 22x22 and lengths up to 300mm. The loading feeder sorts the parts and automatically loads the inductor with new pieces for heating. The feeder is ideal for the production of large nails, screws, etc. Its operation can be seen in a YouTube video. Performance is very high. For small parts, heated items (up to 1100 degrees) can be collected every 6 seconds. There are two inductors available for heating materials up to 20mm and up to 16mm thick. It is possible to modify the furnace according to your needs. The cost of replacing the inductor for other sizes is approximately EUR 3,000. The machine is very versatile in terms of the sizes of products it can heat. Capable of heating flat bars, round bars, or square bars. Nodpfow Hqldjx Ah Hjwb The complete machine consists of a generator, induction furnace with inductor, rod feeder, and cooler.

Condition: excellent (used), functionality: fully functional, Used annealing furnace Manufacturer: Rhode Type: protective gas furnace KL 70/65/135 Nodpex Tbgrofx Ah Howb Year of manufacture: 1992

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: seco, Used Heat Treatment Furnace for Aluminium Alloys Make: SECO WARWICK Model: SDBF-24.16.30/600E Year of manufacture: 2014 EXPERIENCE SECO/WARWICK is a global leader in the development, design, and manufacture of furnaces and systems for the heat treatment of aluminium alloys. SECO/WARWICK has delivered numerous solution heat treatment, aging, and annealing furnaces for processing aluminium alloys from both wrought and cast materials. Nwedpjx Tbf Uofx Ah Hob All technical solutions presented in this offer are proven and have already been successfully implemented by SECO/WARWICK in furnaces for a wide range of applications within the aluminium industry. A significant number of these furnaces have been supplied to the aerospace industry and meet their particularly stringent requirements as well as all relevant standards and regulations. CAPACITY The data provided by the customer forms the basis for the system design and also serves as the foundation for the guaranteed performance of the line. The system is designed for the heat treatment of aluminium pistons and cylinder heads.

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees MARCELS MASCHINEN AG Nsdpfx Ahehz D Iwj Howb

Year of construction: 1990, condition: used, The machine underwent a complete overhaul by the original manufacturer in 2016. Since then, it has seen very limited use and has been stored and disconnected for several years now. Nwodpfx Aheyaczps Hjb

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Nwsdeyabxyepfx Ah Hsb Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Year of construction: 1988, condition: used, Empty weight: 400 kg Dimensions (LxBxH): 120 x 80 x 170 cm Up to 1100 *C Dimensions workplace: 250x140x350mm With 2 cooling-units - Year: 1988 - Documentation available: No Njdjx Sdk Repfx Ah Howb - CE certificate present: No - Serial number: 71943 - Motor power: 5.0kW - Transport dimensions: 1200mm x 800mm x 1700mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Njdpfx Asfz I Rxeh Hswb Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 Nwjdpfx Ajfx Nfmeh Hsb 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Nsdofzccnepfx Ah Hewb Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ Nsdpfefzb Rcsx Ah Howb 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2011, Technical details: temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW weight of the machine ca.: 0,93 t dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Application: drying for washing and painting lines - pass through Sold as is and described! other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V Nodpfx Aeu Nw E Ueh Howb -with chain conveyor/feed line made of Teflon -chain width 200mm -max. workpiece width 150mm passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm access door W x H: 800 x 980mm with safety locking system room height 1400mm *

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition Nwedpfxju R Dhxj Ah Hob *

Year of construction: 2000, condition: good (used), Temptec annealing furnace: Nwodox Tcmyopfx Ah Heb Max workpiece size: approx. 1200 × 1200 × 1200 mm Loaded for transport.

Condition: used, Year of construction: 2001, MAPPI AU 1F 1S 900 1800 O.4 R.S.A. – Year 2001 Tempering furnace Nwedpjx N Sp Asfx Ah Heb Maximum glass dimensions: 900 x 2000 mm Thickness: 4-19 mm

Condition: good (used), Wachtel Infra baking oven – used – model EE 508/76 – year of manufacture approx. 2002 – 5 chambers 1.8 x 0.8 m – steam injection in all chambers – electronic control – hood with fan – power approx. 40 kW – capacity for 30 trays 40 x 60 cm – oven from production / overhaul upon customer request – collection from warehouse / shipping option available – price on request Nwsdpfx Asx R Sx Hsh Hsb

Condition: excellent (used), Year of construction: 2001, Vacuum tempering furnace Manufacturer: BMI year of construction 2001 Nwjdsvcyf Tjpfx Ah Hjb Maximum temperature: 750°C Year of construction: 2001 Batch size: L X W X 1200 X 600 X 600mm Heating: Electric Heating capacity 100 KW

Year of construction: 1991, condition: used, functionality: unexamined, Natural gas-fired, removable car-type batch furnace / kiln / oven for industrial thermal processes FURNACE CAR DIMENSIONS: Length: 1,800 mm Width: 1,000 mm Height: 1,150 mm Lobp Acjxfi Uljnrwohl Maximum temperature: 1300°C Insulation in refractory ceramic fiber blocks 1 swing door 6 JET burners Heat output: 240,000 kcal/h Automatic control panel with Pixsys ATR313 controller + safety thermostat Reverse flame exhaust Nedsxvtatjpfx Ah Hjwb 1 stainless steel heat exchanger Use and maintenance manual Machine sold as is; technical data to be verified

Condition: new, Year of construction: 2025, functionality: fully functional, nominal heat output: 930 kW (1,264.45 HP), temperature: 1,000 °C, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Car bottom combustion furnace (powered by natural gas or LPG) model ST/BT for heat treatments of ferrous metals such as cast iron or steels at temperatures up to 1000°C, complete with one removable trolley and an automatic control and command panel. Furnace suitable for quenching, tempering, hardening, annealing, normalizing, stress relieving, preheating, etc. CE certification declaration 12-month warranty Brand new machine, made in Italy Nwjdpfow Ifl Tox Ah Heb Specifications and attached photos are for reference only; custom-built machines tailored to each specific thermal process are available.

Year of construction: 1999, condition: used, functionality: unexamined, Natural gas-fired, removable rack-type batch furnace for industrial thermal processes FURNACE CAR DIMENSIONS: Length: 1,800 mm Width: 1,000 mm Height: 1,150 mm Lobp Acjxfi Uljnrwohl Maximum temperature: 1300°C Nodpfx Ajxfi Ulsh Hswb Insulation in refractory ceramic fiber blocks 1 swing door 6 JET burners Heat output: 240,000 kcal/h Automatic control panel with Pixsys ATR313 controller + safety thermostat Reverse flame exhaust 1 stainless steel heat exchanger Use and maintenance manual Machine sold as is; technical data to be verified