Used Sintering Furnace for sale (795)

Year of construction: 1991, condition: used, functionality: unexamined, Natural gas-fired, removable car-type batch furnace / kiln / oven for industrial thermal processes FURNACE CAR DIMENSIONS: Length: 1,800 mm Width: 1,000 mm Height: 1,150 mm Lobp Acjxfi Uljnrwohl Maximum temperature: 1300°C Insulation in refractory ceramic fiber blocks 1 swing door 6 JET burners Csdpfx Aexvtatob Tehf Heat output: 240,000 kcal/h Automatic control panel with Pixsys ATR313 controller + safety thermostat Reverse flame exhaust 1 stainless steel heat exchanger Use and maintenance manual Machine sold as is; technical data to be verified

Condition: used, temperature: 950 °C, CHARACTERISTICS HEAT TREATMENT EQUIPMENT .. temperature max.: 950 °C Clear width 2,200 mm Usable width 2,070 mm Usable height 400 mm Working height 1,300 mm Inlet roller conveyor 14,700 mm Inlet box 2,500 mm Annealing furnace 29,169 mm (Annealing furnace clear length) approx. 26,769 mm Cooling section (HT and NT) 51,000 mm Outlet box 2,500 mm Outfeed roller conveyor 14,660 mm Total length 114,530 mm System volume: XXX m3 (annealing furnace and cooling section) N2 purge gas volume 420 m3 Furnace design: Roller hearth continuous furnace Material: Tubes Outer diameter: 14 - 180 mm Csdpfx Aexr Uageb Tshf Wall thickness: 0.8 – 8.0 mm Length: 4.0 – 13.0 m Surface before annealing: - - Throughput at 920 °C annealing material temperature and full furnace utilisation 7,000 kg/h (without holding time) Throughput at 700 °C annealing material temperature and full furnace utilisation xxxxx kg/h (without holding time) Reference pipes: 25 x 2.5 x 8000 mm 33 x 3.5 x 8000 mm 40 x 3.5 x 8000 mm 55 x 2.8 x 8000 mm 63 x 4 x 8000 mm 75 x 6 x 8000 mm 110 x 8 x 8000 mm Tube outlet temp., depending on tube surface: 125 - 150 °C Roller pitch inlet roller conveyor: 620 mm Roller pitch inlet box: 620 mm Roller pitch annealing furnace: approx. 430 mm Roller pitch cooling section: 500 mm Roller pitch outlet box: 620 mm Roller pitch outlet roller conveyor: 620 mm Roller dimensions: Annealing furnace: 155.4 x 14 mm 1.4848/1.4832 Front section HD cooling section: 157.0 x 10 mm 1.4826 (7 pieces) Remaining cooling section: 133.0 x 4 mm St 37 Max. permissible roll hearth load at a working temperature of 920 °C and even distribution of the hearth: 350 kg/m Furnace floor: Refractory lightweight brick: 130 mm Insulating bricks: 130 mm Mineral fibre board: 50 mm Side: Refractory lightweight bricks: 230 mm Mineral fibre board: 100 mm Ceiling: Suspended ceiling bricks and wool insulation 330 mm Ceiling thickness Ring bricks for roller passages made of fibre material Number of control zones: 6 (gas-heated) Operation of control zones: - (gas-heated) ON/OFF, with round-the-clock control - (electrically heated) ON/OFF, with thyristor control Thermocouples: NiCr-Ni Temperature recording range: 0 - 1,000 °C Temperature control measuring range: 0 - 999 °C Working temperature range: 450 - 950 °C Max. working temperature: 950 °C Throughput speed: 7.5 - 150 m/h

Year of construction: 1996, condition: good (used), Useful dimensions: 700 x 650 x 1,100 mm Batch weight: 800 kg Temperature: max. 1,000 °C Heating: Natural gas heated Chsdpfx Asxr Awtob Tsf Quench: Oil/Air Equipment: Control Siemens Simatic

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, - Chamber furnace - Manufacturer: Hans Hoffmann - Model: GKO - Year of manufacture: 2015 - Max. furnace temperature: 450 °C - Usable furnace volume: 5.2 m³ - Total steam chamber volume: 9.6 m³ Codpfoxviapjx Ab Tjhf - Max. heating output: 80 kW

Condition: new, Year of construction: 2025, Firing chamber output: 34 kW Working power: 29 kW New appliance, original packaging: Yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 180 mm with 2 freely rotatable plug-in bends Intake filter / supply air filter: large-surface supply air filter without power loss / included Smoke outlet diameter: 160 mm Firebox length: 500 mm Firebox width: 400 mm Firebox height: 590 mm Chodpfspkwhqsx Ab Tjf Air flow : 2200 m³/h Power consumption: 400W designed for room volume: 500 m³ Area to be heated: 100/150 m² Stove height without hot air conveying pipes: 1560 mm Oven width: 550 mm Oven length without flue gas fan: 920 mm Weight: 200 kg

Year of construction: 1990, condition: used, degree max 1800 total power requirement 5 kW Cedpergbyvjfx Ab Tshf

Condition: new, Year of construction: 2025, functionality: fully functional, nominal heat output: 930 kW (1,264.45 HP), temperature: 1,000 °C, type of input current: three-phase, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Car-bottom combustion furnace (fired by natural gas or LPG) model ST/BT for heat treatments on ferrous metals such as cast iron or steels, for temperatures up to 1000°C, complete with 1 removable trolley and automatic control and command panel. Furnace suitable for quenching, tempering, hardening, annealing, normalizing, stress relieving, preheating, etc. CE certification declaration 12-month warranty Brand new machine, made in Italy The specified features and attached photos are for indicative purposes only; customized equipment tailor-made for each thermal process is available upon request. Chjdpfxow Ifl Ts Ab Tef

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS Chodpfjxur Ndjx Ab Tsf External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW

Year of construction: 1994, condition: good (used), The system consists of: - 2 pieces of hardening ovens (1 x 10 Cg = 1,000 ° C; 1 x 11Cg = 1,100 ° C) - 1 piece tempering furnace (6 Cg = 650°C) - 1 piece of salt bath - 1 piece of oil bath - 2 washing machines (one per bathroom) Codpfexr Avvex Ab Tehf - 1 piece charging machine - 2 parking spaces - Fumigation boards per system - Processing plant for salt - 9 preparation spaces - Base grid with cargo carrier - Capacity pto batch 165 kg - Usable dimensions = 400 x 400 x 600 (l x w x h) - Control Siemens S7

Year of construction: 2003, condition: ready for operation (used), - Chamber furnace - Manufacturer: Glasbeek Finish B.V - Year of manufacture: 2003 - Working temperature: 400 degrees - Power: approx. 125 kW Chsdpfx Ajxvh Tzeb Tef

Condition: new, Year of construction: 2025, Firing chamber output: 49 kW Working power: 45 kW Chedpfek Utrdsx Ab Tof New appliance, original packaging: yes Hot air blower, flue gas blower, control with digital display: included Hot air conveying pipes: 2 x 200 mm with freely rotatable plug-in bends Smoke outlet diameter: 180 mm Firebox length: 660 mm Firebox width: 480 mm Firebox height: 600 mm Air flow : 3500 m³/h Power consumption: 550 W designed for room volume: 1000 m³ Area to be heated: 200/250 m² Stove height without hot air conveying pipes: 1750 mm Oven width: 700 Oven length without flue gas fan: 1150 Weight: 305 kg

Year of construction: 1994, condition: used, max. temperature 1100 Grad voltage 230 V Cjdsthr Ncopfx Ab Tohf output 3 kw range - high tensile Innen 295x230x125 mm

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Chsdpfoxurpwsx Ab Tef Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, inner dimension height: 230 mm, inner dimension length: 600 mm, inner dimension width: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Internal dimensions: 600 x 300 x 230 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 900 x 1,700 mm Weight: 400 kg Cedpfsxqnzbox Ab Tshf

Year of construction: 2002, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters Chodpfx Abexr Avps Tef - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, - Chamber furnace - Manufacturer: Hans Hoffmann - Model: GKO - Year of manufacture: 2015 - Max. furnace temperature: 450 °C - Usable furnace volume: 5.2 m³ - Total steam space: 9.6 m³ Chodpfx Aexvh N Aob Tjf - Max. heating capacity: 110 kW

Year of construction: 2018, condition: ready for operation (used), A slightly used Uterna furnace is available. Internal dimensions X/Y/Z: 1500mm/1500mm/1000mm, power: 38kW, max. temperature: 500°C. Machine dimensions: approx. 2150mm/2650mm/2200mm. Documentation available. An on-site inspection is possible. Cjdpfx Ajxt Rmleb Tehf

Condition: good (used), Foundry4 Dosing Furnace TD1400DC Aluminium Melting Furnace Melting Furnace 850°C Capacity 1,400 kg Heating power 22 kW 4 units in stock Chedpfx Aboxt Habo Tsf

Condition: new, El. heated chamber furnace, make VEI type: VEI_KO_EB recirculation: horizontal airflow max. furnace temperature : 650°C internal dimensions (w x h x t): 800 x 800 x 1000 mm heating power: 51 kW fan power: 5,5 kW Chedpfsipvgisx Ab Tof connected load: 61 kVA

Year of construction: 1991, condition: used, Technical details: max. temperature: 1200 Grad size of opening: 450 mm container volume: ca. 80 l working depth: Kammertiefe: 600 mm voltage: 380 V total power requirement: 46 kW Csdpju N Ak Nefx Ab Tjhf weight of the machine ca.: 2,1 t dimensions L x W x H: 1,6 x 1,6 x 1,46 m dimensions electric cabinet: 400 x 600 x 760 mm Electric melting furnace, crucible furnace, tiltable pouring height= 1050mm pouring Ø 80mm lining=chamot Swing out via 2x hydraulic arm Hydraulics: Manufacturer Houch Hildesheim Optionally an additional crucible can be sold, please ask. Size outside: Ø 1240mm x 1000mm Size inside: Ø 840 x 1000mm Volume of contents: approx. 260 liters Slag collection material: circulation Ø center = 940mm, size 50 x 50mm Material = steel is heat resistant *

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Chedpfx Asxr Aviob Tjf Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Year of construction: 2016, condition: new, heated length: 4000 mm conveyor belt width: 900 mm Codocdizfspfx Ab Tohf temperature: max. 950 ° C

Year of construction: 1997, condition: good (used), Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine Chodpfxexr Avcj Ab Tof - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm Csdpfxscmr D Hs Ab Tehf internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Year of construction: 1973, condition: good (used), rust size: 700 x 650 x 1.100 mm Chjdsxr Arwjpfx Ab Tef batch weight: 1.000 kg Temperature: Max. 750 °C connected load: 78 kW Equipment: Incl. Control system (should be renewed) + Charging machine others: Furnace can be moved under nitrogen