Used Shaving Machine for sale (63,774)

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Nsdpfexy Tm Isx Ad Njkt

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Nodpfoxy Tmuox Ad Nekt

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Njdpfxsxy Tmnj Ad Nokt

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Njdpfexzi S Njx Ad Nskt Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Nksdpfjxy Tlwsx Ad Not

Condition: used, Foil Stamping & Embossing Machine Kolbus PE 70 with automatic Feeder and Pre-stacking conveyor. Heißfolienpräge- & Prägemaschine / Foil Stamping & Embossing Machine Kolbus PE 70 Baujahr / Year 1979 - Serial-No. 178 Open cover size  min.170 x 100mm - max. 660 x 405mm Printing surface 420 x 355mm Pressing power 35 tons Geschwindigkeit / Speed max. 70 cycles/min. Nksdpfx Asydfwzjd Nst Vorstapel Föderband / Case Pre-stacking conveyor Anleger für Buchdecken / Feeder for cases Deckenausbiege Station / Case bending station Folientransportvorrichtung / Foil transporting device Folienabwickelvorrichtung / Foil unwinding device Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Control BWO CNC 921 adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm total power requirement 50 kW Nkjdpfxeydfn Te Ad Not weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Condition: used, max. wheel diameter 1000 mm Nkjdpfx Aoydfn Hed Net gear width 160 mm max. module 7 min. module 0,5 distance table - lower edge of ram 230 mm no. of strokes 31 - 175 Hub/min tool taper MK 4 total power requirement 6 kW weight of the machine ca. 5,2 t

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 130 / 80 mm gear width 180 mm max. module 4 min. module 0,5 spindle turning speed - stepless 300 - 3000 U/min control Siemens 840 D x-travel 200 mm y-travel 170 mm z-travel 250 mm milling head -swivable +/- 45 ° table diameter 168 mm table hole 65 mm clamping length max. 245 mm table turning speeds 0 - 1000 U/min total power requirement 51 kW weight of the machine ca. 9,2 t dimensions of the machine ca. 4,5 x 4,0 x 3,2 m Nksdsxlug Hopfx Ad Nst

Condition: excellent (used), thread dia. 5 - 200 mm grinding length 500 mm Nkodswvl H Uopfx Ad Not thread pitch 0,25 - 6 mm clamping length max. 850 mm grinding wheel diameter 350 mm centre height 105 mm thread M2 - M149 thread - inch 3/32 - 4 inch. inclination li/re +/-10 ° total power requirement 6 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,5 x 1,7 x 1,5 m

Condition: excellent (used), Year of construction: 2005, saw blade diameter 360 / 400 / 425 mm cutting diameter 10 - 140 mm cutting speed 8 - 150 m/min required cooling water max. 40 l/min height of material-table 950 mm Njdpjvzt Eqsfx Ad Nskt max. travel between columns 680 mm control Siemens Simatic total power requirement 28 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: used, Year of construction: 1999, x-travel 5.850 mm y-travel 1.200 mm z-travel 2.000 mm control HEIDENHAIN TNC 430 D table-size 6.120 x 1.000 mm table weight 20.000 Kg internal coolant system feed 20 bar Chip coveyor inkl. handwheel HEIDENHAIN HR-410 Tools changer 60 fach/tools taper ISO ISO 50 engine output 30 kW working speed 5.000 mm/min rapid taverse 12.000 mm/min Nodpfx Aoydfmied Nskt Number of revolutions 20 - 3.000 rpm total power requirement 41 kW weight of the machine ca. 31 t

Condition: used, Year of construction: 1999, x-travel 3.400 mm y-travel 1.250 mm z-travel 2.000 mm Control TNC- 430 PA table-size 4.700 X 1.200 mm V- travel 500 tool taper ISO 50 milling head -swivable 0.001º/0.001º Grad main drive 37 kW Chip coveyor inkl handwheel HR-410 Tools changer 60 pos. milling head Automatic Head 45º weight of the machine ca. 35 t - Automatic Head 45º INCLUDED - Automatic Head 45º 0.001º/0.001º - Head 45º Max. Speed 3.000 rpm - 45º Head Taper ISO-50 - Twist Head Contiuous INCLUDED - Twist Head Max Speed 3.000 rpm Nodpfjydfmcex Ad Nskt - Twist Head Taper ISO-50 - Ram with Quill - Quill Diameter 150 mm. - Quill Taper ISO-50 - Pick up station AITEK for 45º and Twist Heads - Rotary Table ZEATZ Ø 1200 INCLUDED - RENISHAW MP 16+SP2/1

Condition: used, Year of construction: 2010, x-travel 500 mm Nksdpfswntx Njx Ad Nst y-travel 450 mm z-travel 400 mm control 840 D sl Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 130 / 87 Nm tool taper SK 40 DIN 69871 table surface area 630 x 500 mm max. table load 300 kg Swivel range 115 (-110 / +5) ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm rapid traverse X/Y/Z: 24 m/min feed speeds X/Y/Z: 10.000 mm/min total power requirement 32 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DECKEL MAHO - DMU 50 - 5 Axis simultaneous - swivable rotary table - pneumatic clamping device (Preparation)

Condition: used, Year of construction: 1999, x-travel 560 mm y-travel 510 mm z-travel 510 mm Control MSC 502 distance spindle center to table 50 - 650 mm distance Spindlenose and center of table 100 - 610 mm turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 22 / 18,5 kW tool taper MAS BT-40 spindle bearing diameter 70 mm numbers of pallets 2 size of pallet 400 x 400 mm max. workpiecediameter 580 mm max. workpiece height 650 mm switching time 90°: 2,5 sec change time of pallets 6,0 sec number of toolpositions 60 pos. tool taper MAS BT-40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg change-time tool to tool 1,5 sec change-time chip to chip 3,7 sec rapid traverse ( X / Y / Z ) 32 m/min feed speeds 1 - 24.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 63 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 5,5 x 4,5 x 2,7 m Nodpfjtqmt Tsx Ad Njkt CNC - Machiningcenter Horizontal MORI SEIKI - SH 400

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Njdpfxouvdzuo Ad Njkt

Condition: excellent (used), For sale: professional machine vises designed for operation in demanding production environments. Robust steel construction, precise guides, and a large clamping surface ensure stability and rigidity, even when machining large components. Specifications: • Weight per unit: approx. 120 kg • Large working jaw – width approx. 200 mm • Jaw opening: approx. 310 mm • Strong cast iron–steel construction • Hardened sliding guides • Ideal for large milling machines and CNC machining centers. Condition: used, fully functional, normal signs of operation. //// PRICE LISTED IS PER UNIT //// Nodpfx Asw R S S Eod Nokt

Condition: good (used), Hello, -The subject of sale is. -Hang 87D 3P double-head riveter. -Manufacturer: Hang Germany. -Good condition. -The machine is used to rivet eyelets. -Two riveting heads, with adjustable spacing. -Cardboard thickness 0.2-4mm Njdpfx Ajv I E Scjd Nokt -Weight 570kg -380V power supply -Possible transport by freight forwarder (individual valuation)

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Nksdpfx Aexmlined Net

Condition: excellent (used), For sale: Professional dot peen marking machine PRO PEN P5000 (GravoTech Marking SAS), distributed by HAHN+KOLB Gruppe. This is a fully industrial-grade device designed for permanent marking of metal and plastic parts—serial numbers, logos, codes, and production markings. Specifications: • Model: Propen P5000 Pn/d • Year of manufacture: 2010 • Power supply: 100–240 V, 50/60 Hz • Power: 150 W • Operating pressure: 5.5 bar (pneumatic supply) • Manufacturer: GravoTech Marking SAS, France • Operator panel with touchscreen + HP keyboard • Robust worktable with guides. The machine is complete, fully functional, and ready for operation. Ideal for workshops, production plants, tool rooms, and wherever quick and precise permanent marking is required. Very good condition—well-maintained unit with minimal signs of use. Nodpfx Ajw R Spqsd Nskt

Condition: new, I sell, milling machine new. Nodpfouuiytox Ad Nekt

Condition: excellent (used), For sale: classic, proven Gravograph IM3 mechanical engraving machine – perfect for nameplates, signs, industrial marking or jewelry. • Model: Gravograph IM3 • Manufacturer: GRAVOGRAPH GMBH, Umkirch (Germany) • Fully functional motor, clean guides • Set includes a complete collection of fonts and symbols • Stable cast construction • Precise pantograph control • Sturdy work table with linear guidance Nksdpfoun U Ucsx Ad Nst Used condition, technically sound. Suitable for both workshop and decorative or advertising purposes.

Condition: used, Large Size Sewing machine Meccanotecnica Aster 2000/51 Fadenheftmaschine - Sewing machine Meccanotecnica Aster 2000/51 Year 1997 - Serial-No. 115208 Pre-loader Meccanotecnica Sistema Large Size  Opening device (4+4) Sheet control Sewing device, Transport chain Thread cutting device Delivery and Plus Stacker with roller conveyor belt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Nkjdpfoydfhyox Ad Net

Condition: excellent (used), Catalogue number: 7859 ADVANTAGES – 8 spindles – with oscillation – variable spindle spacing (adjustable) – 2 work tables – unpainted – used drilling machine, in very good condition TECHNICAL DATA Drilling spindles: 2x4 pcs Oscillation range left/right: 40mm per side Oscillation speed adjustment on inverter Spindle head adjustment: up/down Each pair of spindles (2 pcs) adjustable: left/right 2 rotation speed options + left/right Max tool diameter: 15mm Table adjustment: up/down Table dimensions: 700x200mm 4 hydraulic cylinders Motor power: 2x 2kW Oscillation motor: 0.75kW Dimensions (L/W/H): 1800x1350x1300mm Weight: 862kg Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at exchange rate 4.2 PLN/EUR Nedpox I D Nlofx Ad Nskt (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7811 TECHNICAL DATA - Compression force: hydraulic - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 990 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Inspection window - Motor: 5.59 kW - Max. operating pressure: 150 bar - Dimensions (L/W/H): 1700x1350x1550 mm Nkedpfxjxxlb Uo Ad Njt - Weight: approx. 1100 kg ADVANTAGES – Italian manufacture – Used briquetting press – Inspection window – Very good condition Net price: 35,900 PLN Net price: 8,550 EUR based on an exchange rate of 4.2 EUR (Prices may change due to exchange rate fluctuations)