Bed milling machines Anayak FBZ-HV 4000 1996

Anayak FBZ-HV 4000

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Lodpfszc D Enox Ab Ajhn serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, CNC travelling column milling machine | Manufacturer: ANAYAK | Type: HVM-6000-P | Year of construction: 2007 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 02.03.2026): - Control system on: 129.206 h - Machine on: 88.579 h - Programme run: 31.645 h - Spindle running time: 26.813 h TECHNICAL DATA Travel distances: - X-axis (longitudinal): 5.300 mm - Y-axis (transverse): 1.500 mm - Z-axis (vertical): 2.500 mm Table: Lhjdpfoyry Rfsx Ab Aon - Table surface: 6.000 x 1.200 mm - Max. table load: 15.000 kg/m² Spindle taper: - Tool holder: ISO 50 Milling head – multi-angle, 45° (degrees): - Angle positioning: Automatic axes B and A - Speed with continuous change: 60 – 4.000 rpm Feeds: - Working feed: 10.000 mm/min - Rapid feed: 20.000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 - Tool changer, chain magazine 100 positions - 2 x Electronic Hand Wheel - 2 x Chip conveyors - External and internal coolant supply through the spindle - CE marking - Documentation No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale – Detailed technical data sheet and information on equipment available on request.

Condition: used, Year of construction: 1999, x-travel 2000 mm y-travel 1500 mm z-travel 1460 mm Control Heidemhain type TNC 426 CB mm Rotary table 1350x1550 mm turning speeds 10-3000 U/min spindle taper ISO 50 Table load 6000 kg T-slot - width 28h7 mm T-slot - distance 150 mm number of T-slots 150 Lhsdpfxeyt R D Se Ab Asn Feed 10-3000 mm/min weight of the machine ca. 24 t B-axis 0.1-1.5 rpm Feed rate 3 rpm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, position of the milling head: 0.001, spindle speed (max.): 3,500 rpm, table width: 1,500 mm, table load: 10,000 kg, table length: 1,500 mm, type of input current: three-phase, workpiece weight (max.): 10,000 kg, overall weight: 26,000 kg, input voltage: 400 V, LAGUN GORATU GTM 3 MILLING MACHINE (TYPE T) TECHNICAL SPECIFICATIONS Brand: Lagun Model: GTM3 Year: 2016 CNC: Heidenhain iTNC 530 Table: 1500 x 1500 mm X: 3000 mm Y: 1200 mm Z: 1500 mm V (Column cross travel: 1000 mm Automatic milling head - ISO 50 Spindle speed: 4,000 rpm Rotary table (capacity 10 tons) Internal coolant system: 40 Bar Spindle power: 28/34.5 Kw Coolant filter PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE) Lhedpfxjy T Sffo Ab Aon

Condition: good (used), Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm Lsdpsb A Nu Refx Ab Aehn -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Year of construction: 1988, condition: used, Eubama S5 Rotary Transfer Machine Serial Number 5531 Year 1988 Lhjdpedg Da Iefx Ab Asn Pristine Condition Not been used for 15 years

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Lhodpfx Aszrd Tvsb Asn

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, overall weight: 3,200 kg, This CITIZEN M32V Swiss Type Turning was manufactured in the year 2007 in Japan. The machine has a spindle speed of 8000 rpm. Official brochure attached for more details. Machine Benefits Ljdpfx Abjyi Eino Ashn Technical Machine Benefits • Max chucking barstock: Ø 32 mm • Max machining lenght: 320 mm • Max drilling diameter main spindle: Ø 12 mm • Max back-spindle drilling: Ø 10 mm • Max. Back-spindle rotating speed: 7000 rpm • Max. Back-spindle power: 2 kw • Gang rotary tool: 5 fixed tools • Turret tools: 10 positions • Bar feeder: iemca boss 332 e/r type 37ll • Equipment: chip conveyor.

Year of construction: 1985, condition: ready for operation (used), Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible. Lsdpfx Asw Duuqjb Ashn

Condition: used, Year of construction: 1998, Technical details: x-travel: 2500 mm y-travel: 935 mm z-travel: 1000 mm table surface area: I 1615 x 800 mm table surface area: II 800 x 800 mm spindle taper ISO: 50 milling head speed: 60 - 3000 U/min feed speeds: 1 - 3000 mm/min rapid speed: 10 m/min total power requirement: 45 kW weight of the machine ca.: 18,5 t dimensions of the machine ca.: 5 x 5 x 4 m with CNC HEIDENHAIN TNC 426 Universa Milling Head -C-axis automatic Horiz-Vertical - Intermediate angles manual table II 800 x 800 mm as B-axis ( rotary table ) coolant attachment and chip conveyor * Ledpfx Abezc I Nds Aehn