Machining center

Mikron HSM 400 U

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron type HSM 400 U Pjdpfx Aoyzt A Ushyegk The machine is defective and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe Pgodpfxoymcvms Ahysk • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 2006, 1. TECHNICAL DATA Working area X axis: 400 mm Y axis: 450 mm Z-axis: 350 mm B-axis: +-110 ° C axis: 360 ° Working spindle Speed range: 100 - 42`000 rpm tool holder: HSK E 40 spindle power at 40 % ED: 13 spindle power at 100 % ED: 10 Torque at 60 % ED: 4,25 Torque at 100 % ED: 3,2 Lubrication: oil/air Feed rate Rapid traverse speed: Max. 40 m/min B axis: 150 rpm C axis: 250 rpm Axis acceleration, XYZ: Max. 1g (10 m/s2) B axis: 100 rad/s2 C axis: 300 rad/s2 Pjdpfx Ahsx H Ntaoyogk Tool changer: 68-fold Chip to chip: 12.5 s Tool change time: 10,0 s Work table: 120 mm Max workpiece diameter that can still be rotated 360 °: 230 mm Max. Workpiece height: 350 mm Max. Workpiece weight: 25 kg Hfsbrjigrf Ie Icm Ener Control: Heidenhain iTNC 530 Weight: 5500 kg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller model: iTNC Heidenhain 530, spindle speed (max.): 42,000 rpm, swivel angle C-axis (max.): 360 °, number of axes: 5, No minimum price – guaranteed sale to the highest bidder! The lot consists of 2x 5-axis HSC machining centers and pallet system with robot MIKRON HSM 600 U (serial number: 217.88.00.070) TECHNICAL DETAILS Travel X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / –110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): 217 Nm max. Clamping torque: 1,400 Nm B-Axis Swivel range: +30° / –110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load capacity: max. 120 kg Tool magazine: 68 stations Control: Heidenhain iTNC 530 Workpiece weight: max. 120 kg EQUIPMENT Rotary tilting table with Erowa UCP MIKRON HSM 400 U (serial number: 217.87.00.178) TECHNICAL DETAILS Travel X-axis travel: 400 mm Y-axis travel: 240 mm Z-axis travel: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ±110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): 217 Nm max. Clamping torque: 500 Nm B-Axis Swivel range: ±110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): 686 Nm max. Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load capacity: max. 25 kg Tool magazine: 36 stations Control: Heidenhain iTNC 530 EQUIPMENT Rotary tilting table EROWA ROBOT MULTI TWIN Gripper station: 6 stations Grippers: various Storage system Rotary storage: 5 levels Level allocation Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Absolute measuring systems on all axes Infrared touch probe LASER Pgsdpfx Ajx Hx T Ajhyjk Electronic handwheel for setup mode Graphite dust extraction 2x BURN WK 5806 Rotary pallet storage

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 3056 mm Measurements depth 3994 mm Measurements height 2187 mm Pgedpfex D Sc Nex Ahyjk Machine weight 6360 kg Main Drive Spindle speed range 4000 Number of axis 5 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30000 mm/min Y-Axis Movement ±50 mm Y-Axis Rapid Traverse 0000 mm/min Z-Axis Movement 795 mm Z-Axis Rapid Traverse 30000 mm/min B-Axis Movement 734 mm B-Axis Rapid Traverse 30000 mm/min Workpiece Workpiece drm over bed 590 mm Workpiece drm over support 360 mm This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, it's equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Cutting range 90° Round: 260 mm Flat: 300 x 260 mm Smallest diameter: 5 mm NC-controlled, automatic material feed with hydraulic full-stroke material clamping Easy operation via NC control with plain text display Material advance function without reclamping for short section cuts Robust, linear-guided feed gripper with servo positioning for maximum precision Automatic adjustment of blade guides to material width Recommended options: Powered chip brush synchronized with blade speed Pgodpfx Aoh Tnd Aohyok Separate control panel 7" CE panel, network-compatible, up to 1000 data sets storable, history memory for various functions and data, etc.

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , 16 station turret, 15kW spindle motor, Pedpfx Ahox Elr Ajyegk milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. Psdpfxsx Awzbs Ahyegk X1020mm Y610mm Z610mm 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand.

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm Psdpfxetv Ia Ts Ahyjgk spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: excellent (used), Year of construction: 2018, operating hours: 2,000 h, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 30,000 kg, turning diameter: 3,500 mm, power: 100 kW (135.96 HP), TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.500 2. Min. machining diameter mm 0 Pgodetpnlwepfx Ahyok 3. Max. height of the part mm 3.000 4. Max. load on the table to 30 5. Table diameter mm 3.000 6. Table speed range rpm 2 ÷ 130 7. Main AC motor - turning kW 100 8. The maximum torque of the faceplate in turning mode Nm 105.000 9. Ram vertical stroke (Z axe) mm 1.750 10. Turning ram cross section mm x mm 300x300 11. Horizontal stroke –X axe mm 2.000 12. Feed range (X and Z axe) mm/min 1 ÷ 6000 13. Rapid traverse (X and Z axe) mm/min 8.000 14. Feed motor torque (X and Z axe) Nm 22 18. Vertical stroke of the cross rail mm 2.700 CNC Equipment 1. Equipment type Fanuc Overall Dimensions 1. Floor space m 8.5 x 6 2. Max. height of the machine m 8.2 3. Max. height over floor level m 7.4 3. Machine weight to 89 Tool Magazine 1. Number of tool magazines - 1 2. Number of tools/magazine - 16 3. Feed motor torque with encoder Nm 12 4. Tool change time sec. 25 5. Maximum weight of the tool holder - for turning daN 100 6. Maximum length of the tool holder - for turning mm 600