Used Wood Shaving Machine for sale (66,583)

Condition: new, Year of construction: 2026, WOOD SHAVINGS MACHINE KÄLIN Hobeltechnik, mod. MPC-P • Quantity of fresh shavings by hour: 3.800 Kg/hour • Measures logs box: 2.800mm x 1100mm x 1.300mm • Max. log input length: 2.650mm • 2 removables symmetrical cutterheads. Lenght 1.140mm. Each one in 3 pieces of: - Diameter: 200mm - Length: 380mm - Number of knifes: 8 - Sharpening full cutterheads, without removing knifes!! • 2 extra removables symmetrical cutterheads, for replacement during sharpening. Super fast cutterheads change patented system!! • Power of the cutting heads: 90 kW/120 HP • Feeding speed controlled by ELECTRONICAL INVERTER: 6 to 36 m/min • Automatic control of the forward-charge ratio of the machine • Power of the feed motor: 15 kW/20 HP • Control System of the material level inside the logs box, to avoid working without logs • Cabinet and control panel. Touch screem to control the machine • Motorized conveyor belt for the wood shavings. 800mm x 5.000mm • Weight: 11.000 Kg • CE Klodpfx Apovk Saxj Aow

Condition: new, Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: AVB-HELIX100ST4, total length: 6,500 mm, total width: 2,600 mm, total height: 3,500 mm, height adjustment type: mechanical, overall weight: 16,000 kg, compressed air connection: 8 bar, shaft diameter: 260 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, infeed height: 800 mm, control cabinet width: 600 mm, control cabinet length: 2,200 mm, control cabinet height: 2,000 mm, working length: 3,000 mm, workpiece width (max.): 800 mm, empty load weight: 16,000 kg, workpiece length (max.): 3,000 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 3,000 rpm, FEATURES OF THE WOOD SHAVING MACHINES  Bin size: 3000 mm  Hopper is equipped with the Speed Control System  The robust machine frame structure of single-piece steel construction  Heavy body structure against vibration caused by long-term use of the machine  Conveyor extraction: 1000 mm wide outfeed provided with a rubber band or PVC 4 mm thickness  Direct motor operation with an independent control panel with a digital screen,  PLC-controlled electric panel independent from the machine, minimum 5-6 meters away from the machine,  Can be operated with 380V 50-60 Hz (additional transformers can be added for foreign countries operating at different voltages, optional)  Adjustable knife heights and cutter heads  Possibility to adjust shavings thickness between 0,4 and 1,2 mm(for straight blade models)  Blades and speed can be varied to produce Large Flakes (Equestrian), Small Flakes (Poultry Layers), Fine flakes (Poultry Broilers)  To avoid downtime, a few sets of spare blades should be ordered together with each machine.  Shavings outlet: Gravity discharge from the cutter heads to the belt conveyor  easy cutter head blade adjustment system;  All cutter head blocks are moved out on the machine during the blade changing.  We are also supported by our customers with blade purchasing,  All parts used in our machines are CE certified and selected with the high-efficiency principle  Knives T.C.T. Carbide 14*14*2,0 mm CERATIZIT Made in EU, bearings COC, motors use the highest quality Turkish or imported products (WEG, SIEMENS, optional).  Automatic lubrication system for the whole machine's essential parts  All machines will be CE standards  The hydraulic system will work with the proportional valve.  Double-armed hydraulic system for the extra power of heavy-duty work  Control panel designed with Mitsubishi Electric, AB (Allen Bradley), Siemens, Schneider, or ABB  Modem Ethernet connection for the main company  The wood shaving machine output will be on the right side or the left side  digital display screen for control in one touch  All blades Diamond 14*14 mm or 15*15 mm, 500 pcs long-life blades  Directly mounted to the cutter head for all-electric motors to prevent losing power  Specially produced spiral helix mobile roller system with a T.C.T. carbide knife (first and only in Turkey)  Separate the control panel and the user interface panel TECHNICAL SPECIFICATIONS Number of Cutterheads 4 Length of Cutter Head 100 cm Number of Blades 500 Carbide/cutter head Power Supply 4 *37 KW = 148 KW (198,5 HP) Hopper Working Stationery Hopper Dimensions mm 3100*1200*1000 Working Voltage 380 V-400V-460V-560V 50-60 Hz Conveyor Band Motor 0,75 KW Hydraulic Motor 22-30 KW Total Power 181 KW Cutterhead Speed 2800 rpm Cutterhead Diameter 230 mm Shaving Depth 0,03 mm - 0,05 mm Max.Log Input Length 150-300 cm Max.Log Input Width 10-90 cm Working Distance 2200 mm Klodpfx Apsgmbtqj Aew Machine Dimensions L6450 x H3014 x W2514 mm Weight 17.000 Kg Production capacity: 4.500-5.000 kg/h

Year of construction: 2025, operating hours: 24 h, condition: new, functionality: fully functional, machine/vehicle number: AVB-48, AVB-48 Wood Shaving Machine Heavy-Duty Performance. Industrial Reliability. The AVB-48 is one of our most popular heavy-duty wood shaving machines, engineered for high industrial capacity and consistent performance. Designed to process both round logs and offcuts with minimal material size requirements, this model is ideal for log shaving as well as wood waste processing. Built with a robust, long-lasting body structure, the AVB-48 ensures durability even under intensive use. It comes equipped with T.C.T. carbide blades for superior cutting precision and extended service life. Also, we can be equipped with straight blades for horse shavings production as well. For enhanced versatility, the machine can be fitted with an optional hopper pressing system—perfect for handling small pieces and offcuts efficiently. The AVB-48 supports both planer blade and carbide blade working principles, offering flexibility to match your production needs. TECHNICAL DETAILS; TECHNICAL SPECIFICATIONS AVB-48 or AVB-48HELIX Number of Cutterheads 4 Length of Cutter Head 60 cm Number of Blades 190 T.C.T. blades/cutter head or 7 straight blades Power Supply 4 *11 KW = 44 KW (59 HP) Hopper Working Hydraulic Hopper Dimensions 1500*600*900 mm Working Voltage 380 V 50-60 Hz Conveyor Band Motor 0,75 KW Hydraulic Motor 7,5 KW Total Power 52,25 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 160 mm Shaving Depth 0,2 mm - 1,2 mm Max.Log Input Length 75-150 cm Kjdjxwizpopfx Ap Aelw Max.Log Input Width 10 - 45 cm Working Distance 1200 mm Machine Dimensions L4300 x H1700x W1600 mm Weight 3.500 kg Production Capacity 1000-1200 kg/h

Year of construction: 2023, condition: new, TECHNICAL DESCRIPTION OF AVB-HELIX100BB The size of the log hopper can be adjusted to meet the customer's needs. The hopper dimensions are 230-250 cm in length, 100 cm in width, and 110 cm in height. The cutter heads are designed to be movable for simple operation. The hopper speed is adjustable to control the thickness and amount of shavings produced. It also has a sensitive shaving type for continuous use. The hopper is constructed with heavy-duty steel and has a total weight of 7,000 kg. Its dimensions are 540 cm x 165 cm x 185 cm. The cutter heads are run by two electric motors, each with a power of 37 kW. They operate at 3,000 RPM and are equipped with inverters. The production rate for shavings is between 2,800 and 3,000 kilograms per hour. double hydraulic cylinder to move the log hopper. We offer a cutter head design that is particularly suited for small flake production, with the added benefit of being available for chicken farms. Additionally, we also have a larger flake option that would be suitable for horse stables. Our cutter heads are equipped with T.C.T. carbide blades and designed in a spiral helix type to create mini flakes. We place 400-500 pieces of carbide blade to ensure top-quality wood shavings for animal bedding industries. The size and thickness of the shavings can be easily controlled by adjusting the head RPM and the travel speed of the hopper. Our bearings cups are equipped with high-quality heavy-duty types such as COC, TIMKEN, or SKF. Adding lubrication oil is hassle-free. Our hydraulic motor has 15 KW power with a speed control unit drive. Additionally, we have an anti-jamming system between the plate and the hopper to prevent splinters. Our machine can handle any type of wood, including slabs, about to the shape of the cutter heads. You can also use off-cuts and all types of residues for perfect results. If needed, we can add a pneumatic press to the machine hopper for even better performance. TECHNICAL SPECIFICATIONS AVB-HELIX100BB Number of Cutterheads 2 Operation Length of Cutter Head 100 cm Number of Blades 500 T.C.T / cutter head Power Supply 2 *37 KW = 74 KW( 99,23 HP) Hopper Working Hydraulic Hopper Dimensions mm 2200*1000*1000 Working Voltage 380 V 50-60 Hz Klsdpfx Asnl Efxjp Ajw Conveyor Band Motor 1,5 KW Hydraulic Motor 15 KW Total Power 90,5 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 250 mm Shaving Depth 0,03- 0,5 mm Max.Log Input Length 150-220 cm Max.Log Input Width 10-95 cm Working Distance 2200 mm Machine Dimensions L5400xH1650xW1850 mm Weight 7.000 Kg Production Capacity 3000 kg/h

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Kjdpfx Ajzmt U Eop Aslw

Condition: used, Year of construction: 1990, Weight 1,3 t turning length 40 mm cylinder 0-0,5 rapid traverse 3,7 m/min Kodpfx Apezndt Uo Aelw

Condition: excellent (used), Year of construction: 2018, used vertical CNC machining center Manufacturer: Biesse Type: Skipper V31 Year of manufacture: 2018 Ksdpfozl Aqaox Ap Ajlw automatic positioning of the chuck pre-positioning and zero-point detection via photoelectric cell work tables with air cushions pressure rollers and vertical pressure device optional: infeed and outfeed devices working area X 200 – 3200 mm working area Y 70 – 900 mm working area Z 10 – 00 mm working unit BH17 with: - vertical drilling spindles 10 pcs. - horizontal drilling spindles in X 4 pcs. - horizontal drilling spindles in Y 2 pcs. - groove saw 120mm diameter in X direction - milling spindle 4.5 kW workpiece clamping system Control/Software Biesse Works Delivery includes all tools and HSK tool holders shown in the pictures!

Condition: excellent (used), Industrial MXS5115A vertical spindle moulder / woodworking router table, suitable for professional woodworking shops. Ideal for profiling, grooving, edge shaping and custom milling operations on solid wood and wood-based panels. Specifications • Model: MXS5115A • Table size: 650 × 580 mm • Maximum working thickness: 120 mm • Spindle speed: 18,000 rpm • Collet sizes: 6.3 mm / 12.7 mm • Motor power: 2.2 kW • Power supply: 380 V, 3-phase Features • Heavy-duty cast iron work table • High-speed spindle for precise routing and profiling • Industrial construction • Suitable for furniture production, cabinet making and joinery • Easy adjustment and operation Condition • Good working condition. • Ready for use. • Inspection and testing are welcome. Klodpfxszmukue Ap Ajw

Condition: used, Year of construction: 1977, max. grinding diameter 400 mm grinding width 0 mm max. module min. module total power requirement 3 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features * Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunately the machine does not have many accessories. It would therefore be a good investment as a second machine if you already have suitable accessories available. Klsdpfx Apet Hwnve Asw

Condition: new, Year of construction: 2026, HOT AIR GENERATOR by wood model F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery for machines in prompt delivery we grant you Price List year 2024 -35% OFF . Promotional Sumer 2026 CE regulation: YES EC Declaration of Conformity: YES Instruction manual: YES Indicative surface to be heated F28 : sqm. 100/150 Indicative surface to be heated F55CV : sqm. 300/350 Indicative surface to be heated F85CV : sqm. 450/500 Ksdpfx Ajh U A Uaop Aslw Indicative surface to be heated F120CV : sqm. 600/700 ndicative surface to be heated F240CV : sqm. 1.000

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA Kedpfx Apszh Ihve Ajlw - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES – Italian-made – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary according to larger exchange rate fluctuations)

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Kjdpfx Aeu R Sxxsp Aelw Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 1979, Table dimensions 1300-800 mm Weight 4,7 to. Year 1979 Ksdezhcizjpfx Ap Aslw x-travel 1000 mm angular milling head ja documentation ja serial number 733 weight of the machine ca. 4,7 t

Year of construction: 1991, condition: used, Used machine Year of manufacture: 1991 With 4 sanding units Workpiece dimensions: Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Abrasive belt dimensions: 200 x 1800 mm Extraction ports 2 extraction ports 80 mm 4 extraction ports 120 mm Required air velocity: 30 m/sec L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Availability: short term Kledpfx Asw Tfxdop Ajw Location: Odenwald

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. Kedpfjxc Rmqex Ap Aslw CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Fully equipped Biesse Brema EKO 2.2, including a return system and auxiliary units. Quick delivery. Klsdjzhbpaopfx Ap Aew

Condition: used, Year of construction: 2021, machine/vehicle number: 2021358, total height: 2,000 mm, total length: 3,600 mm, total width: 2,500 mm, overall weight: 1,500 kg, Portal milling machine, profile guides KPF-S 20, tool length sensor, vacuum table, vacuum pump from Becker, cross table, dust extraction unit Holzkraft ASA4303, tool set. Kledpfxjzgc T Do Ap Aew Please refer to the attached expert report for details on the condition of the item.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000042824, We are offering for sale a very well-maintained Biesse BREMA EKO 2.2 machine from 2021. The machine includes tool changing, two drilling units, and a set of tools. Kljdpfxjzcrfpj Ap Asw Software: bSolid. The machine has been serviced by our technician, so we are very familiar with its condition and history. The machine can be tested at our showroom in Brno.

Condition: used, Year of construction: 1986, table size cross table 490 x 400 mm axis stroke (X,Y,Z) 320x385x430 mm reus 560 - 14000 U/min Kledpexbh E Ujfx Ap Ajw tool taper SK 30 table load max. 100 kg Weight ca. 500 kg

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000028110, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 2,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 900 mm, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, For sale: Premium vertical CNC machining center. The machine was purchased new; we are the first and only owners, ensuring a clear maintenance and usage history. The machine is in fully operational condition, exceptionally well maintained, and requires no further investment. - Working range x/y/z: 2600-900-60 mm Kodpfjy Sfw Eox Ap Ajlw - Working head with BH17 drilling head (10 horizontal and 6 vertical drills) - Speed up to 65 m/min - BSolid control - Automatic dimension reading via laser

Condition: excellent (used), functionality: fully functional, CUTTING , TRIMMING SAW machine for solid wood model MZ PROJECT LC 4000 automatic machine second hand machine CE regulation: YES end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 Kljdszdqxcepfx Ap Asw with automatic pusher (CN). Maximum cutting width: mm.1500 conditions of use: Excellent. maximum cutting length: mm.4000 motor power: Hp 15 total weight: kg. 3.000 volts: 380/50

Condition: used, Year of construction: 2016, machine/vehicle number: 7405_408, functionality: fully functional, operating hours: 788 h, HOLZ-HER Evolution 7405 White Edition CNC Machining Center for Sale For sale is a well-maintained HOLZ-HER Evolution 7405 White Edition, manufactured in 2016. The machine is in very good technical and optical condition and can be demonstrated while powered on. The exceptionally low processing hours of only 788 hours with active feed are particularly noteworthy. In 2021, the machine was professionally serviced and completely realigned by the manufacturer. Since then, it has been used only sparingly and, as a result, runs smoothly, precisely, and reliably. Technical Data Manufacturer: HOLZ-HER Model: Evolution 7405 White Edition Year of Manufacture: 2016 Machine Number: 7405_408 Software / Control CAMPUS Version: 6.4.4.2 NC-Hops Version: 6.6.2.207 Operating Hours Active Feed / Processing Hours: only 788 h Machine ON: 6,723 h Equipment 4-MAT Version Drilling unit with 15 spindles Sawing and grooving unit Milling unit with 6-position tool changer Handheld control unit Vertical and horizontal machining Vacuum clamping system Ideally suited for: Furniture manufacturing Klsdpfxjy Sicxj Ap Asw Interior design Kitchen manufacturing Carpentry shops CNC entry-level or capacity expansion Condition Very well-maintained overall condition Regularly serviced Professionally realigned by the manufacturer in 2021 Only slight use since then Immediately ready for use Runs very smoothly and precisely No known technical defects The machine can be inspected and tested while in operation. Availability Available from week 25/2026. Inspection possible by appointment. Assistance with loading and transport organization is possible. Price Negotiable: €40,000 net

Condition: good (used), Year of construction: 1992, Single-piece sanding machine Kjdpfx Apjwyda Ue Aslw sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 7,810 h, input current: 43 A, input frequency: 50 Hz, type of input current: three-phase, workpiece weight (max.): 2,804 kg, number of axes: 3, number of slots in tool magazine: 6, actuation type: electric, overall weight: 2,804 kg, number of tool turrets: 31, Equipment: CE marking, documentation/manual, type plate available, For sale is a Morbidelli Drilling Center with low operating hours – the machine is connected and ready for trials and tests. MORBIDELLI CX210 CNC Drilling Center R00169 MORBIDELLI CX210 TECHNICAL DATA Min./max. workpiece length mm 200/3,050 Min./max. workpiece width mm 50/1,300 Min./max. workpiece thickness mm 8/95 Max. traverse rate in the X-axis m/min 40 Max. workpiece weight kg 70 Max. traverse rates in the X-Y-Z axes m/min 70-40-30 F31LTC DRILLING HEAD Number of vertical spindles pcs. 21 Number of horizontal spindles in the X-axis pcs. 6 Number of horizontal spindles in the Y-axis pcs. 4 Motor power kW 2.2 Spindle speed rpm 4,500 (option 3,000 – 8,000) Fixed integrated saw in the X-axis, diameter mm 125 Max. saw blade thickness mm 6 Saw blade speed rpm 5,500 (option 3,600 – 9,700) INSTALLATION Compressed air consumption Nl/cycle 80 Dust extraction air requirement m3/h 3,300 Klodpfxezdfhaj Ap Ajw Dust extraction air velocity m/s 25 Dust extraction nozzle diameters mm 200 + 80 Electrical protection kVA 19 Key advantages: -HSK63F milling head 6.6KW -Cutting saw -31 L drilling head -Infeed and work roller table -2 clamps instead of 1 pc. Speed 70 m/min Spindle + 6-position magazine

Condition: used, Year of construction: 2000, machine/vehicle number: AA1/11510, functionality: fully functional, operating hours: 19,250 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,080 mm, workpiece width (max.): 1,200 mm, number of axes: 3, number of slots in tool magazine: 12, total height: 2,346 mm, overall weight: 4,000 kg, Equipment: CE marking, documentation/manual, We are offering this used SCM Record 130 machining center, year of manufacture 2000. Equipped with a more powerful vacuum pump (2050 m³/h), vector rotary axis, angle gearbox adjustable from 0 to 100 degrees (HSK63), drilling unit with 9 spindles, and low operating hours. If you have any questions or require further information, please feel free to send us a message or call us. Kedpfx Apsyzadrs Aslw