Used Profiling for sale (5,203)

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 18105876-5772, shaft diameter: 360 mm, roller diameter: 800 mm, overall weight: 46,000 kg, total length: 4,500 mm, total width: 4,850 mm, total height: 3,750 mm, operating speed: 6 mm/s, Certified shafts made of forged NiCrMo alloy steel + Protected with height adjustment system (PHAS) Quick bending roll configuration change system (TIMS Technology) Side guide rollers adjustable in 6 directions with fully hydraulic controls Steplessly adjustable rotation speed and simultaneous shaft movements Dsdpfxowayt Rj Ah Iekn Operating switches on a centrally movable control panel

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 2,200 kg, Double pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: normal Dsdpeyzdf Tofx Ah Iekn Description: Year 2017 ISO 2A (41 cm) Capacity 2,200 kg Sideshift Opening range 560-1960 mm Width 1200 mm Forks 1200 mm ID OS1940

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 2,200 kg, Double pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Dedjyzdfyjpfx Ah Iokn Technical condition: good Description: Year 2015 ISO 2A (41 cm) Capacity 2,200 kg Sideshift Opening range 560-1,930 mm Width 1,200 mm Forks 1,150 mm ID OS1937

Condition: used, functionality: not functional, load capacity: 2,600 kg, Double pallet fork Dkodjyzdc Sopfx Ah Ien ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for operation and fully functional Technical condition: For spare parts Description: ISO 3A (51 cm) Capacity 2,600 kg Sideshift Opening range 540-1,930 mm Width 1,250 mm Forks 1,150 mm Broken frame ID OS1922

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 2,600 kg, Double pallet fork ISO class: ISO Class 3 = 2,500 - 4,999 kg Dsdpoyzdcfjfx Ah Iekn Condition: Ready for operation and fully functional Technical condition: Good Description: Year 2013 ISO 3A (51 cm) Capacity 2600 kg Sideshift Opening range 560-1940 mm Width 1200 mm Forks 1200 mm ID OS1916

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 1,600 kg, Double pallet fork Dodpfx Ajyzdb Ueh Iskn ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2018 ISO 2A (41 cm) Capacity 1,600 kg Sideshift Opening range 560-1930 mm Width 1,100 mm Forks 1,000 mm ID OS1915

Year of construction: 2026, condition: new, 30 mm extruder with cross-head for smallest coating object´s, with cooling bath, puller and winder with guiding device Dkjdpfx Ahef Uc Ure Isn

Condition: new, Year of construction: 2026, Pneumatic press for the production of aluminum components, suitable for all types of grooving, punching, and drilling, featuring an adjustable-height ram and foot pedal operation. Maximum force / working load: 3,000 kg at 8 bar Pneumatic pressure: 6–8 bar Usable light (vertical clearance): 260 mm Stroke range: 0–35 mm Packing dimensions: 500 x 320 mm Ram speed: 23 mm/s Approximate air consumption per cycle: 25 liters Table dimensions: 530 x 340 mm Dkedpepa Nw Sofx Ah Ijn Clear height: 260 mm Adjustable stroke: 0 to 35 mm OPTIONS: Rotary cabinet / base stand PACKAGING AND DIMENSIONS: 600 x 490 x 600 mm (86 kg) Standard packaging: wooden crate We look forward to hearing from you! Plantec Maschinen GmbH

Condition: used, Year of construction: 2010, grinding length 1025 mm grinding width 520 mm Dkedpfjvxwl Aex Ah Ijn Control SINUMERIK 840 D tool taper HSK-A 63 A - axis ° workpiece weight 30 kg distance grinding spindle - table min./max. 473,5 - 1023,5 mm x-axis 520 mm y-axis 550 mm z-axis 1000 mm V-axis 166 mm feed x-axis 4 - 6.000 mm/min feed y- axis 4 - 4.000 mm/min Feed z- axis 30 - 25.000 mm / min. table dimensions 1.400 x 874 mm spindle speeds (infinitely variable) 0 - 12.000 U/min power capacity - grinding motor 35,00 kW grinding wheel diam. min/max. 100 / 300 grinding wheel width 60 mm total power requirement 100,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 8,60 x 7,25 x H3,80 m 5 Axis Profile grinding machine, with SIEMENS SIN840D, double dividing head (B-C axis), V-axis (coolant nozzles), EROWA tool changing device (machine can also be operated without a tool changer), fire extinguishing device, Renishaw probe prepared. Without Host-Computer for workpiece- tool- management. without coolant device - was connected to the central supply.

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Djdpfxox Anpvo Ah Iekn Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: new, Number of sanding units 1 St. Profile width 390 mm Profile height max. 390 mm Dsdpfx Aeytx Ufoh Iskn

Condition: used, Year of construction: 1998, Technical Data: Grinding Area (incl. grinding wheel width 50 mm): 700 x 320 mm Grinding Height: 400 mm Longitudinal Stroke: 740 mm Cross Stroke: 270 mm Clamping Surface of the Table: 1000 x 250 mm Distance Table to Spindle Center: 650 mm Max. Table Load: 400 kg Infinitely Variable Spindle Drive: 6 kW Max. Grinding Wheel Dimensions: ø300 x 60 x 127 mm Coolant System: 170 l Dsdoxvy Hgopfx Ah Iskn Weight – Total Equipment: 4600 kg Features: - Fully electronic multi-axis control system, Brand NE (Manufacturer: Schleier) - Brushless AC servo and spindle drives - Manual feed of CNC axes via movable electronic handwheel, axis selection, rapid traverse +/- as well as digital increment display integrated into handwheel - Free-standing electrical cabinet incl. operating hours counter - Cooling unit - Automatic central lubrication - Enclosed work area - Oil collection pans - CE marking Accessories: - 6x grinding wheel flanges incl. grinding wheels - 3x grinding wheel flanges - 1 extracting device for grinding wheel flange - 1 balancing arbor - 1 set of leveling plates and screws - Extraction unit - Extended vertical column for extraction unit

Condition: used, total length: 3,700 mm, total width: 1,000 mm, total height: 1,700 mm, overall weight: 800 kg, oscillation stroke: 30 mm, grinding belt length: 1,500 mm, grinding belt width: 150 mm, power: 6.5 kW (8.84 HP), rotational speed (min.): 1,400 rpm, rotational speed (max.): 2,800 rpm, No. 04513 Profile grinding machine / automatic edge processing machine Rehnen KBA Used Dkjdeytd Tmepfx Ah Ien Profile grinding machine / automatic edge processing machine for grinding edges, milling profiles, and grinding profiles in a continuous process. The machine also has a corner copying milling machine. The materials to be processed are solid wood, chipboard, and MDF. Material thickness 10 - 65 mm Material length min. 50 mm Material width min. 60 mm Feed speed 8 m/min Total power 6.5 kW Equipment: - Oscillating edge sanding device (sanding belt dimensions 150 x 1500 mm / 1400 and 2800 rpm / oscillation stroke 30 mm / contact roller and sanding shoe) - Upper milling unit - Lower milling unit - Corner copying milling machine / corner rounding milling machine - Bottom profile sanding device - Top profile sanding device - Feed chain conveyor with top pressure Incl. technical documentation Incl. 6 used profile belts (must be refitted) Transport dimensions approx. 3700 x 1000 x 1700 mm LWH Weight approx. 800 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Year of construction: 2010, condition: used, functionality: fully functional, SBZ 122/33 Profile Machining Center 3.8m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to protect the profile's visible surface. Latest generation CNC 3-axis control with industrial PC based on Windows XP 15" flat-screen monitor and 2 USB ports for online connectivity, barcode scanner, and label printer. Dedpfow Dzagjx Ah Iekn Network connection: RJ 45 10/100 MBit User-friendly input via eluCam 3D visualization Rapid positioning of the machining unit (up to 60 m/min) on the X-axis thanks to robust and low-wear direct drive. High-resolution absolute encoders eliminate the need for axis referencing. Technical Data: X-axis travel: 3800 mm Max. travel speed: 60 m/min Y-axis travel: 350 mm Max. travel speed: 30 m/min Z-axis travel: 280 mm Max. travel speed: 30 m/min Max. machining length with end machining left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Milling spindle output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard positions, 1 position for rotary angle head) Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool positions (without tools) Safety fences left and right Light barrier at the front 4 horizontal pneumatic material clamping devices Automatic clamp positioning 1 foldable material stop Central chip extraction with chip box Dosing spray device Milling spindle with integrated rotation unit for angle head Rotary angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center is factory-equipped with a front light barrier system as standard. Lateral protection is provided by safety fences. Any necessary rear protection must be provided on-site or ask us for a quote for safety fences. Includes: Length measurement for profile bar Additional automatic tool changer Various used tool holders and milling cutters

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Dkjdpfjyx Dz Nsx Ah Isn Pulling force: approx. 40,000 N Tread width: 300 mm Passage width: max. 500 mm Effective contact length: 2400 mm Haul-off speed: max. approx. 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Dedjyx Dwkopfx Ah Iskn Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), WADKIN SILHOUETTE STRAIGHT AND PROFILE GRINDER TWIN GRINDING HEAD:  A CENTRAL DESIGN FEATURE THAT ALLOWS FOR EXTREMELY FAST CHANGES BETWEEN PROFILE GRINDING AND STRAIGHT KNIFE GRINDING OR RESHARPENING. CAPACITY:  IT FEATURES A FULL 300 X 350MM GRINDING CAPACITY. PRECISION TOOLING:  USES A UNIQUE TURRET HOLDER THAT CAN HOLD UP TO SIX STYLI, ALLOWING FOR QUICK SETUP ACROSS VARIOUS WORK TYPES. ADJUSTABILITY:  THE TEMPLATE SLIDE INCLUDES COARSE AND FINE ADJUSTMENT VIA DIAL INDICATORS FOR HIGH-ACCURACY POSITIONING. COMPACT DESIGN:  BUILT WITH SPACE-SAVING FEATURES TO FIT INTO SMALLER TOOLROOMS WHILE MAINTAINING THE ACCURACY OF LARGER AUTOMATIC MACHINES. INCLUDED: 40MM OR 50MM ARBOR AS NEEDED Dsdpfxeyxxgmj Ah Ijkn OPTICAS SETTING STAND

Year of construction: 2020, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: 840D, overall weight: 15,000 kg, This PROFILATOR DV370-HL-05 was manufactured in 2020. A robust and reliable unit, it is ideal for those looking to enhance their machining operations. Consider the opportunity to buy this PROFILATOR DV370-HL-05. Contact us for more information. Additional equipment • Toothed Spindle 1: Tool clamping interface: HSK-C63/ Tool speed max: 4500 1/min /Screw tightening torque, expansion chuck: 20 Nm • Toothed Spindle 2: Tool clamping interface: UTS 50 /Tool speed max: 7000 1/min/ Screw tightening torque UTS clamp: 40 Nm Machine Benefits Technical Machine Benefits • Nc workpiece spindle 1: traverse path x1: 1760mm, z1: 385mm/ travel resolution on the cnc: 0. 001mm/ input speed of the axes max: 60 m/min Dkedsynhu Djpfx Ah Ien • Nc workpiece spindle 2: traverse path x2: 2011mm, z2: 390mm /travel resolution on the cnc: 0. 001mm/input speed of axes max: 60 m/min • Nc workpiece counterholder: traverse path x3: 104mm, z3: 107mm /travel resolution on the cnc: 0. 001mm /input speed of the axes max: 60 m/min • Gear tower 1: traverse path y11: 195mm /travel resolution at the cnc: 0. 001mm /swivelling angle b1 max: 10° • Loading gantry: travel u5 axis: 1907mm /traverse path v5 axis: 271mm • Input speed (all applicable axes): max 60 m/min • Rotation diameter max: 210mm/machining diameter max: 200mm/workpiece length max: 300mm/interface, workpiece clamping: kk6/workpiece speed max: 1100 1/min • Factory back spindle 1/2: speed max: 1000 1/min/gear spindle 1 and 2, shift slide y11, nc workpiece counterholder, slide x1/x2, slide z1/z2, a11 axle (charging unit), u5 & v5 axes (loading gantry):/speed max: 3000 1/min, 9000 1/min for gear spindle 2 • Loading gantry: 500kg/magnetic chip conveyor: 100kg/water recooler: 150kg

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge Dsdpfxeyxpaws Ah Iokn - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Condition: used, functionality: unexamined, Ferwood Code: RU0011952 – Manufacturer Code: PJ-300H – Condition: Used – Functionality: Not tested – Compatible Machine: – If interested, we offer an overhaul service, please contact us. 140KG 120X80X115 Djdpfxeyrplrj Ah Iokn

Condition: new, Year of construction: 2024, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, total length: 7,600 mm, total height: 3,000 mm, total width: 2,650 mm, overall weight: 14,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, DYAS 3 BDC CNC Beam Profile Machining Center Operating Range for Section Min. 200 x 80 mm / Max. 1200 x 500 m Operating Range for Length Min. 2000 mm / Max. 12000 mm (Gross: 12500 mm ) Drilling Head (Spindle) 3 Spindle Speed 50-4000 (stepless) rpm Dedpsgbdpksfx Ah Ijkn Spindle Power 22 Kw Spindle Torque 280 Nm Tool Changer 6 for each spindle , total 18 Tapping Capacity M10-M30 Bandsaw (Optional) Cutting Speed 20-100 m/min / Mitering Angle +60°/-45°

Condition: new, Shaft diameter 40 mm 138 mm Upper shaft diameters 138 mm engine output 1,1 / 380 kW / V work speed 6 m/min weight of the machine ca. 230 kg required space 750 x 600 x 1400 mm The Gerd Wolff PK 40 is a pipe bending machine which is produced for our GERDWOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Dkedpfx Ahsyn R Ugo Isn Standard Accessories and technical details - Sheet metal frame - 2 bottom rolls are driven - Direct drive power - Upper roller is idle (free rotation) - Hardened rollers - Hardened shafts made of special steel material - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Optional equipment - Tube bending rollers - Profile bending rollers - Angle bending rollers - Digital readout - Optional lateral angle guides

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, Complete production line for drywall metal profiles (CD/UD/CW50/UW50) for sale, ideal for anyone looking to start or expand a profitable business in the construction materials industry. ✔ Strong and reliable machines Djdpfoyv R N Uox Ah Iokn ✔ Efficient and continuous production ✔ Easy to operate ✔ Perfect for producing your own products or supplying construction material distributors The production line is in very good working condition, well maintained, and can be tested on site. This is an excellent opportunity for entrepreneurs or companies who want to enter the drywall profile market without investing in expensive new equipment. Selling due to business reorganization. 📞 For more details, price, photos, or videos of the machines in operation, please contact me by phone or message.

Condition: excellent (used), functionality: fully functional, CURVAPROFILI GAIANI DIAMETER 40 3 ROLLERS HORIZONTAL Dksdpfx Ahjxzgnnj Ijn USED MACHINE INTERNAL CODE: SVR 370

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0799134157, Double-head miter saw for PVC and aluminium window profiles. Dedpfjyvidqsx Ah Iekn