Used Profilator for sale (5,782)

Condition: used, TECHNICAL DETAILS - part holder spindle speed : 1500 [Rpm] - tool holder spindle speed : 3000 [Rpm] - max part Ø : 50 [mm] - dimensions : 2820 x 2400 x 2500 [mm] - weight : 4200 [kg] Lajdpjuhbp Eofx Ab Ueh EQUIPMENT - CN SIEMENS 840D - STAUBLI robot 6 axes TX60 with CS8C control - deburring device

Year of construction: 1976, condition: used, machine/vehicle number: 40 127 76, span the range of around: mit Spannfutter 115/48 (not available) 3 - 42 mm this maximum clamping: 345 mm span the range of around: mit Spannfutter 115/56 (not available) 5 - 50 mm this maximum clamping: 95 mm cutterhead speed: (RM 4) 740 - 1700/(ME 4) 580 - 1160 Upm spindle drive: 3 kW Lodpfx Aj Sxnpjb Uoah hydraulic drive: 4 kW space: Maschine 2100 x 1380 x 1880 mm weight: ca. 2000 kg

Year of construction: 1984, condition: ready for operation (used), Multi-edge lathe Ljdpfemn Tpdox Ab Ueah For 2-4-6 edge turning on turned parts . Fabr.WERA Type: Profilator RSM-150 Bj.1984 Application machine documentation Completely available.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, shaft diameter: 100 mm, bending force (max.): 28 t, stroke length: 200 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Capacity: 90 mm Shaft diameter: 100 mm Usable shaft length: 280 mm Roller speed: 4.6 rpm Bending force: 280 kN Stroke: 200 mm MACHINE DETAILS Control: Conventional Motor power: 12.5 kW Laedsxmgw Tspfx Ab Ueh Dimensions (L x W x H): 1,600 mm x 1,600 mm x 1,800 mm Weight: 2,800 kg EQUIPMENT CE marking Documentation

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, length stop: 4,500 mm, tool diameter: 400 mm, spindle speed (max.): 6,000 rpm, controller model: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontally adjustable, infinitely variable) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment: 150 mm NC axis, electronically infinitely variable Radial adjustment: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontal bottom Axial adjustment: together with cross-cut saw Electronic length stop Length: 4,500 mm 1st & 2nd tenoning and slotting spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter-bearing Axial adjustment: 580 mm NC axis, infinitely variable Tailstock counter (entire clamping length is counter-supported) 1st & 2nd profiling spindle Position: vertical right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter-bearing Tool swing diameter: min. 140 mm Tool swing diameter: max. 232 mm Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Profile milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment: 30 mm NC axis, infinitely variable Radial adjustment: 125 mm NC axis, infinitely variable Spindle speed: 9,000 rpm Tool swing diameter max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter-bearing Axial adjustment: 350 mm NC axis, infinitely variable Radial adjustment: 80 mm NC axis, infinitely variable Spindle speed: 6,000 rpm Tool swing diameter min.: 140 mm Tool swing diameter max.: 232 mm 5th profile milling unit (hardware spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment: 115 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 210 mm 6th profile milling unit (grooving unit from above), in auxiliary stand Position: vertical right, operating from above Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment: 100 mm, 8 positions via pneumatic turret Radial adjustment: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool swing diameter max.: 180 mm 7th profiling spindle (grooving unit from below) in auxiliary stand Position: horizontal bottom Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment: 100 mm NC axis, infinitely variable Radial adjustment: 100 mm NC axis, infinitely variable Spindle speed: 5,850 rpm Tool swing diameter max.: 200 mm MACHINE DETAILS Slotting spindle: 2 pcs. Number of milling units: 7 pcs. Laodpfxsxp U N Nj Ab Ujh Control: Weinig PC-Nexus Weinig Unicontrol 12 INCLUDING used window tooling OERTLI IV 68, IV 78 wood and wood-aluminium Additional features can be found in the attached document! Note: The machine has already been properly dismantled.

Condition: good (used), Code: 0132 Brand: BIESSE Lsdexqntdopfx Ab Uoah Model: SKIPPER 100 - CE Standard CNC working center for furniture, kitchens, custom furniture, panels and various - CE Standard - Year 2006 Technical data: 3-axis (x-y-z) CNC working center - swan neck machine Movable panel, fixed working head - panel horizontally Integral protection of the working head and with emergency front carpets Numerical control with biesseworks software Infeed table (with motorized belts) left N. 2 panel fixing clamps (for their introduction into the working area) Outfeed table (with motorized belts) right Useful (maximum) working area (x - y - z) mm 3000 x 1000 x 60 Dimensions (minimum) workpieces that can be machined (x - y - z) mm 90 x 70 x 8 Dimensions (maximum) workpieces that can be machined (x - y - z) mm 3000 x 1000 x 60 (for panels longer than mm 2000, the minimum thickness becomes mm 13) Total installed power (kw) 20 (approx.) Lower working units: N. 1 vertical electro spindle hsk d-50 (power Hp 4,8) with inverter N. 1 circular saw unit (on x-axis) dia. mm 150 (power Hp 2,3) with inverter N. 29 vertical drilling spindles N. 10 horizontal drilling spindles (8 in x-axis + 2 in y-axis) Upper working units: N. 1 vertical electro spindle hsk d-50(power Hp 4,8) with inverter N. 1 circular saw unit (on x-axis) dia. mm 150 (power Hp 2,3) with inverter N. 29 vertical drilling spindles N. 10 horizontal drilling spindles (8 in x-axis + 2 in y-axis) Transfer for panel loading and unloading: structure made of aluminum profiles, belt-driven table for panel translation/lifting bar BiesseWorks machining programming system Compressed air 7/8 bar Total power Kw 20 Overall dimensions - (see attachment) Machine weight kg 2700

Condition: good (used), mileage: 54,327 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,670 mm, first registration: 10/2017, loading space length: 3,100 mm, loading space width: 2,030 mm, loading space height: 500 mm, emission class: euro6, color: blue, driver cabin: day cab, suspension: other, tire size: 195/75R16, number of seats: 3, Year of construction: 2017, Equipment: ABS, air conditioning, traction control, trailer coupling, = Additional options and accessories = - Electric windows Laedpfow Dyv Tjx Ab Ujh - Electric mirrors - None - Partition wall - Central locking system = Remarks = Configuration: 4x2, twin tires, unladen weight: 2,773 kg, gross weight: 3,500 kg, trailer hitch, cab type: single cab, air conditioning, number of airbags: 1, rear wiper, parking assistance: none, electric windows, electric mirrors, partition wall, radio/cassette, color: blue, heated mirrors, lighting type: halogen lamp, Bluetooth, engine power: 120 kW (161 hp), fuel: diesel, Euro 6, drive technology: timing chain, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, body type: extended, side panels: 3 sides, roof rack: none, rear closure: tail lift, central locking, seats: 3, seating configuration: 1+2, upholstery: fabric, manual seat adjustment, 3-way tipper EURO 6, 54,000 km, spare wheel, spare wheel profile: 4%, tire type: winter tires = Further information = Transmission Transmission: 6-speed manual Axle configuration Tire size: 195/75R16 Brakes: disc brakes Axle 1: tire tread left: 6 mm; tire tread right: 5 mm; suspension: coil spring Axle 2: twin tires; tire tread left inner: 7 mm; tire tread left outer: 7 mm; tire tread right inner: 7 mm; tire tread right outer: 7 mm; suspension: leaf spring Dimensions Measurements (L x W x H): 640 x 215 x 240 cm Weights Unladen weight: 2,773 kg Payload: 727 kg Gross vehicle weight: 3,500 kg Functional Loading platform height: 100 cm Maintenance APK (vehicle inspection): valid until 02.2026 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial information Lease price: €336 per month (panel van, 72 months); Please ask for further information and terms Identification Registration number: KLEYN1

Condition: good (used), power: 30 kW (40.79 HP), Year of construction: 2010, operating hours: 51,548 h, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, pressure (max.): 8 bar, rotational speed (max.): 2,945 rpm, machine/vehicle number: 100609.1, Equipment: type plate available, The Kaeser ASD 57 is an energy-efficient screw compressor designed for reliable compressed air supply in industrial applications and is characterized by its compact design and quiet operation. With advanced Sigma profile technology and intelligent control, it offers optimum performance and durability. Technical details: Item number: 100609.1 Serial number 1941 Year of manufacture: 2010 Nominal output: approx. 30 kW Maximum operating pressure: 8 bar Lsdpfx Abot Iwyus Ueah Engine speed: 2,945 1/min Condition: used (see pictures and type plate)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Precision profile grinding machine PPSM Habrama 2200 rack and pinion grinding machine Manufacturer [manufacturer]: Habrama Moving column machine - ideal for automatic loading Type [ type]: PPSM 2200 Control unit: Siemens 840D sl Sinumerik Year of construction: 10/2009 Grinding range: Module 0.1 to 22 cutting and special profiles, special pitches Travel path axes: X-axis (longitudinal): 2200(2500)mm Y-axis(transverse): 500mm Z-axis (vertical): 410mm C-axis: +30°/-30° B-axis: +20°/-20° U-axis: 105mm W-axis: 125mm B2-axis: +20°/-20° Workbench: 390 x 3,750mm Max. Table load: 4000kg Feed speed X-axis: 21m/min Y-axis feed speed: 10m/min Feed speed Z-axis [feed speed]: 6m/min Feed speed C-axis [feed speed]: 2m/min Feed speed B-axis [feed speed]: 6m/min Feed speed U-axis [feed speed]: 4m/min Feed speed W-axis [feed speed]: 4m/min Feed speed B2 axis [feed speed]: 6m/min Grinding head Drive power: 45kW (S6 at 40%) Spindle speed: max. 4000 1/min Grinding wheel holder: 100mm H5 Ljdju Rqg Iepfx Ab Ueah Cutting speed programmable: constant 10-80 m/s Grinding wheel: ceramic or resin-bonded Grinding wheel width max.: 101mm Grinding wheel ø: min. 210mm-max. 400mm Bore diameter of grinding wheel: 152.4mm (6 inch) Grinding range: up to module 22 special profiles freely programmable Hybrid clamping device / plates Coolant system: approx. 4000 liters with integrated deep-bed filter Machine total connected load: 100kVA Weight: 20,000 kg Space required [needed space ]approx. (L x D x H): 5,200mm x 3,000mm x 2,600mm Complete documentation is available. Inspection under power can take place at short notice. For further questions please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Scope of delivery: - Table extension - Rubber rollers With veneer edge sanding device with contact shoe With fine adjustment and fence rulers With grooved infeed fence for veneer overhangs Quick switch between veneer edge and solid wood sanding possible Approximate dimensions: Length (product): 1900 mm Width/Depth (product): 900 mm Height (product): 1350 mm Net weight: approx. 290 kg Oscillation motor power: 0.25 kW Extraction port diameter: 140 / 100 mm Height adjustment of longitudinal table: 230 mm Min. cross table height: 720 mm Working table length: 960 mm Working table width: 350 mm Working table height adjustment: 230 mm Connection voltage: 400 V Phase(s): 3-phase Current type: AC Mains frequency: 50 Hz Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt running speed(s): 20 m/s Oscillation stroke: 20 mm Sanding surface length: 1050 mm Sanding surface width: 200 mm Laedpfew I Up Usx Ab Ush Includes: 1 pack sanding belts K 80 1 pack sanding belts K 120 Availability: short-term Location: Hochheim

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 900 kg Main Drive Lasdexqia Espfx Ab Ush Spindle motor power 85 kW This Emmegi VEGAMATIC was manufactured in 2008. It is an automatic cutting centre for aluminium profiles, featuring a feeder travel of 7395 mm and feed speed up to 60 m/min. The blade rotation angle ranges from -45° to +45°, with a standard blade diameter of 500 mm. Ideal for precise large-scale cutting tasks. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: ready for operation (used), - decoiler 10 ton + lift - straightener punch corner notcher unit (3+4 rollers), incl 5 hydraulic punch possibilities fixed width: 1350 mm - 12 rollforming stations with variabel width + 1 fixed width station for optical profiling distance between stations: 400 mm axle dia: 50 mm axle length: 110 mm min axle-axle: 130 mm max axle-axle: 200 mm variable opening: 300 - 1400 mm fixed width: 1350 mm Ledpfx Aboxqh Tqj Ueah - Van Otterloo 4 columns flying shear cutting/punching (type HVS 60.06.1260 PRM 012) - max shear capacity: 1350 mm - conveyorbelt - NN pneumatic stacker (max length 10000 mm) - controlunit - currently equipped with light rolls for undulated profiles - TOTAL LENGHT 39 meter ( with the conveyor belt)

Condition: ready for operation (used), functionality: fully functional, No reserve price – guaranteed sale to the highest bidder! The accessories are being auctioned as part of a business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! Contents include: - large calipers - slab milling cutters - profile milling cutters - saw blades Ledpfx Absxqbuzs Usah - various shank end mills - reamers - additional workshop supplies MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 800 x 1,100 mm Weight: 250 kg

Condition: good (used), mileage: 799,201 km, power: 456 kW (619.99 HP), first registration: 09/2014, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2014, Equipment: ABS, air conditioning, cruise control, parking heater, traction control, = Additional Options and Accessories = - Digital Tachograph - Tachograph (Recording Device) - Fixed - Alloy Wheels - Power Take-Off - Pump - Sleeper Cab - Additional Braking System = Remarks = Number of axles: 3, Configuration: 6x4, Tare weight: 15,855 kg, Gross weight: 30,000 kg, Total fuel capacity: 540 liters, Fifth wheel height: 132 cm, Fifth wheel: Fixed, Number of locks: 2, Alloy wheels, Suspension type: Air suspension, Cabin type: Sleeper cab, Cruise control, Tachograph (Recording Device), Digital Tachograph, Air conditioning, Auxiliary heating, Color: Blue, Engine power: 456 kW (612 Hp), Euro: 5, Transmission type: Opti-cruise, Gears: 12, Additional braking system, Retarder, Brand: Scania, Power steering, ABS, ASR, Power take-off, PTO type: 1, Pump, Crane, Crane manufacturer: Loglift 251S, Crane year of manufacture: 2015, Crane load capacity: 25, Maximum load: 2800 kg at 8 m, Number of support columns: 2, Control position: top control, Crane position: behind the cab, Pushable: 1, Additional hydraulic connection: none, Rotor, Tree grab, LOGLIFT 251 S = Further information = Transmission Transmission: 12-speed, automatic Axle configuration Laodpfx Aswbzuxjb Ush Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Left tire profile: 2 mm; Right tire profile: 3 mm; Suspension: Leaf spring Axle 2: Tire size: 315/80R22.5; Twin tires; Left tire profile: 4 mm; Left tire profile: 5 mm; Tire tread depth, right inner: 5 mm; Tire tread depth, right outer: 5 mm; Suspension: Air suspension Axle 3: Tire size: 315/80R22.5; Twin tires; Tire tread depth, left inner: 2 mm; Tire tread depth, left outer: 4 mm; Tire tread depth, right inner: 3 mm; Tire tread depth, right outer: 4 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 789 x 255 x 402 cm Weights Unladen weight: 15,855 kg Payload: 14,145 kg GVW: 30,000 kg Functional Crane: Loglift 251S, built in 2015, behind the cab Pump: Yes Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 2 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Walter Helitronic CNC tool grinding machine Grinding profile machine Manufacturer [manufacturer]: Walter Type [ type]: Helitronic Steuerung [control unit]: HMC 500 (Bosch Intramad controller) Incl. handwheel Year of construction: 10/2001 Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle: swiveling +-90˚ Feed speed: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force: 10,000-15000N Grinding spindle motor power: 24 kW Tool holder: SK 50 according to DIN2080 Weight: 7,000kg Space required [needed space ]approx. (W x D x H): 3.0m x 2.25m x 2.85m Incl. various accessories as per photos Complete documentation is available. Viewing under power can take place at short notice. For further questions please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you. Lajdpfx Aeu Rqw Teb Ush

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using lateral stops or templates at a 1:1 ratio Pneumatic copy pin, two-stage, for two different cutter diameters The patented suspension of the copying lever ensures precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via spindle lock Laedpsxqihiofx Ab Ueh Pneumatic material clamping device Metering spray unit Options: Copy templates milled for standard handle holes and PZ milling Copy pin Collet chuck Stop system Material clamping device with 2 clamping cylinders Milling cutter 8 mm Availability: short-term Location: Flörsheim

Condition: used, Technical details: round bar steel: 32 mm square edge steel: 30 angle steel: 90 x 8 mm flat steel: 100x18 mm Knife length: 220 mm number of cutting strokes max.: max. 30 Hübe/min p.Min. voltage: 220/380-50 V rated current: 15,8/8,55 Lodpfx Asu Icghsb Usah connected load: 4,8 kW weight of the machine ca.: ca. 1,1 t Dimensions (LxWxH): 0,8 x 1,2 x 1,3 m Capacity: - Steel sheet: 16mm - Flat steel: 100 x 18mm - T profile: at 45°: 65 x 7mm, right angle: 90 x 8mm. Machine is in working condition *

Condition: good (used), mileage: 631,652 km, power: 176 kW (239.29 HP), first registration: 03/2016, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 265/70R19,5, fuel: diesel, wheelbase: 6,200 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, = Additional Options and Accessories = - Digital Tachograph - Tachograph (Control Unit) - Short Cab - Tail Lift = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 3873 kg, Unladen weight: 8117 kg, Gross weight: 11990 kg, Total fuel capacity: 300 liters, Number of locks: 1, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (Control Unit), Digital tachograph, Air conditioning, Color: White, Engine manufacturer: Volvo, Engine power: 176 kW (236 Hp), Fuel: Diesel, Euro: 6, Transmission type: I-Shift, Gears: 12, Power steering, ABS, ASR, Seats: 2, Tail Lift, Tail Lift type: Tailgate, Tail Lift load capacity: 1500 kg, Tail Lift manufacturer: Dhollandia, Tail lift material: Aluminum, Tail lift size: ?, Spare tire, Spare tire profile: 2 mm = Further information = Drivetrain Engine brand: VOL Transmission Transmission: 12-speed, automatic Axle configuration Tire size: 265/70R19.5 Lsdpfxovrp Ehj Ab Ueah Brakes: Disc brakes Axle 1: Steered; Left tire profile: 11 mm; Right tire profile: 11 mm; Suspension: Leaf spring Axle 2: Twin tires; Left tire profile: 6 mm; Left tire profile: 7 mm; Right tire profile: 4 mm; Right tire profile: 12 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 1083 x 255 x 337 cm Weight Curb weight: 8,117 kg Payload: 3,873 kg GVW: 11,990 kg Functional Tail lift: Dhollandia, tailgate, 1500 kg Interior Number of seats: 2 Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Identification License plate: 45-BGX-8 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Gear grinding machine Gleason Pfauter G320 CNC + Promot Automation - Gear grinding machine Manufacturer: Gleason Pfauter G320 + with Promot Automation handling unit Type: G 320 Control unit: Siemens 840 Incl. control panel Laedpfx Aeu Sqgqjb Ueh Year of construction: 10/2001 Module: 0.5-7.0 Min. workpiece diameter: 10 mm Max. workpiece diameter: 380 mm Number of teeth: 10-600 Vertical slide stroke “Z“: 200 mm Horizontal slide stroke “X“: 230 mm Tangential slide stroke (SHIFTING) “Y“: 135 mm Swivel angle of clamping head “A“: +-45° Stroke – tailstock center [ ]: 125mm Tangential slide stroke – dressing [ ]: “V“ 180mm Radial slide stroke – dressing [ ]: “U“ 110mm Rotation speed – grinding wheel in processing [ ]: 3000rpm max - infinitely variable Edge speed – linear axes [ ]: 10000 mm/min Max. table rotation speed [ ]: 240 RPM Table resolution [ ]: 0.001° Processing feeds [ ]: infinitely variable Working feeds [ ]: infinitely variable Grinding wheel dimensions Min/Max. diameter [ ]: 270/350mm Width [ ]: 104mm/max. Bore [ ]: 160mm System weight [weight]: 11,500kg Accessories [accessories]: as per photos +Promot-Automation +Conveyor belt +Cooling belt system +Hydraulic unit Space requirement for machine [needed space ]approx. (W x D x H): 3.7m x 2.4m x 2.75m Space requirement for Promot Automation [needed space ]approx. (W x D x H): 4.5m x 1.6m x 4.0m Complete documentation is available. Functionality and machine features: Cylinder grinding machine with 8 numerically controlled axes for machining gears with straight and helical gears that can be produced by rolling, including a dressable worm profile disk. Linear and rotary main axes are designed to be hydrostatic. High-performance machine for finishing cylindrical gears with straight or helical involute teeth. Inspection under power can be arranged at short notice. If you have any further questions, please do not hesitate to contact us. Price, ex warehouse here plus VAT Condition: good - ready for demonstration Delivery: ex warehouse - as viewed Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: used, Year of construction: 1993, Technical details: height of printing: - height of printing: - connection electric: 100-240 V pneumatically operated: min./max.: 4,8/6,9 bar The printer is a lower case inkjet printer for contactless mark products. Application: for commercial marking and labeling purposes. The device can print on any surface, any structure, any profile and on any form. (according to the manufacturer) Equipped with two control units. other features: - dimension height: 3.3 - 8.6mm and 1/8 "- 1/3"; Points of reference: 62 digits; - operation is via control unit - equipment with control unit 170i and accessories Control unit 178i dimensions: - machine: L: 600 x W: 650 x H: 1800mm - control units: L: 203 x W: 508 x H: 610mm Sale as is. Without test run! i.D. Laodpfxou Nu Tpj Ab Ush *

Condition: excellent (used), Year of construction: 2004, ABA sanding machine Starline CNC profile sanding machine Surface sanding machine Manufacturer [manufacturer]: ABA ELB Type [ type]: Starline Control unit: Siemens Sinumerik Incl. handwheel Year of construction: 10/2004 Weight: 6000kg Space required [needed space ]approx. (W x D x H): 4.1m x 5.1m x 2.5m Complete documentation is available. Inspection under power can take place at short notice. Lajdpevcm Eaofx Ab Uoh For further questions please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: used, Technical details: table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t Ledpfx Abou Ix H Dj Ujah dimension machine xH: 11,5 x 6,6 x 8,4 m CNC vertical lathe - vertical - NEW ( It is a demonstration machine on the photos) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *

Condition: good (used), Year of construction: 1992, Reinecker Universal Tool Grinding Machine WZS-50 CNC Precision Grinding Machine Profile Grinding Machine Manufacturer: Reinecker Type: WZS-50 CNC Control Unit: Siemens Sinumerik 880G Year of Construction: 10/1992 Lajdpfx Aswhqu Ujb Ush Including extinguishing system Including various accessories Travel axes: X – Y – Z – C – E Interface Type: E32R Weight: 3000 kg Space required approx. (L x D x H): 3 m x 3 m x 3 m Complete documentation is available. Inspection under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex-stock, plus VAT. Condition: good - ready for demonstration Delivery: ex-stock - as seen Payment: net - upon receipt of invoice Subject to prior sale, errors excepted. We welcome your order. Additional machines and systems are available from stock – please inquire. We look forward to hearing from you.

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m Laodpfeu Nit Rsx Ab Ush SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: used, Technical details: floor-plate length: 3160 mm plate width: 2700 mm plate height: 410 mm Plate thickness: 410 mm weight of the machine ca.: 8,0 t Clamping plate for sale Material cast steel/profiled cast iron Finished surface T-slots according to DIN 650: a=41.5; h=72.0; b=70.0; c=28.5 mm Center stand 300 mm 11x through holes Ø 32 x 60 mm 2x fixing holes at the front Ø 41 mm * Ledpfx Absu Ni Dij Uoah