Used Profiling Lathe for sale (10,846)

Year of construction: 1997, condition: like new (used), UNDER FLOOR WHEEL LATHE RAFAMET UGB 150 Underground lathe for reprofiling train wheels without necessary disassembly Hfodpfx Aajg R Syhs Eei Truck guage: 1435 mm Range of wheel tread diameters: 600 to 1,500 mm Maximum axle load: 250 kN Minimum wheel base: 1,700 mm Machine is from 1997 Dismantled, ready for shipment.

Condition: like new (used), Year of construction: 2023, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Hjdpeyw Rzaefx Aa Esfi Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm Hsdezfguispfx Aa Esfi 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Hsdpfx Aajy D E Ris Eefi Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Hsdpfx Aasxdmgvs Eofi Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,000 mm, total length: 1,100 mm, total height: 550 mm, input voltage: 220 V, working width: 600 mm, infeed width: 650 mm, spindle motor power: 1,100 W, warranty duration: 24 months, power: 1.2 kW (1.63 HP), Equipment: CE marking, emergency stop, type plate available, DESTEK MAKİNE is the first and only company to establish a production facility in its field in Türkiye. All machines and hand tools we sell are produced in our own workshops using state-of-the-art CNC machinery from design to final product. With the strength we gain from production, we have been providing products and services to our valued customers in the standing seam roof & facade cladding sector for over 10 years. By conducting a thorough needs analysis with a customer-first approach, we bring all global technological innovations to our country simultaneously. Therefore, our vision can be summarized as: “ Whatever is Manufactured in the World, DESTEK MAKİNE can Produce the Same or Even Better ” With a solution-oriented engineering approach, an experienced team of experts in the field, and a reliable service network, we are here whenever you need us. Our company guarantees 100% customer satisfaction. Our commitment to quality is certified by: CE Conformity Certificate ISO 9001 ISO 14001 ISO 10002 ISO 45001 Every manufactured "DESTEK" standing seam machines goes through delicate tests. "DESTEK" Features - Standard standing seam height 25 mm - There is no problem of oil canning when working with the machine. - Automatic Cutting Guillotine (Standart) - Ribbing Attachments (Standart) - Dijital Counter (Standart) - Cabled Remote Controller (Standart) - Emergency Stop Button (Standart) - Forward and backward button (Standart) - Wrench Sets that will be required during use (Standart) - Weight: 260 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Material width adjusment (180 mm – 650 mm) (Standart) Hjdpfx Aaewzzlwe Esfi Please contact us for more information and prices.

Condition: excellent (used), Model: 4M/65E Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe Hjdpexz Tfaefx Aa Eefi - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great

Condition: not inspected (used), Year of construction: 2006, operating hours: 28,200 h, functionality: unexamined, machine/vehicle number: R2EU3804, turning length: 310 mm, turning diameter: 220 mm, rotational speed (max.): 6,300 rpm, controller model: Siemens 810 DC powerline, Submitting a bid obligates you to collect the item on time, on July 30, 2026, at 1:00 PM! Technical data: ● Control system: Siemens 810 DC powerline ● Operating hours approx.: 28,200 ● Spindle hours approx.: 6,950 ● C-AXIS & POWERED TOOLS ● Tool holder: VDI 30 ● Number of tool positions in the turret: 12 (6 of which are powered) ● Max. bar diameter approx.: 45 mm ● Max. distance between centers approx.: 687 mm ● Max. spindle speed approx.: 6300 RPM ● Internal coolant line through the turret ● Chip conveyor ● Parts catcher ● 400 V / 50 Hz / 17 kVA ● Further technical data - see images Scope of delivery: ● Existing manuals, chip conveyor, collet chuck ● The tool holders are not included in the scope of delivery! Dimensions & weights: ● Installation dimensions L x W x H approx.: 3700 x 2000 x 2200 mm ● Weight approx.: 3500 kg Hfedpfx Aszlfcrsa Eji

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: GN08201038G, spindle speed (max.): 4,500 rpm, center width: 460 mm, controller model: Fanuc 0i-Mate TO, power: 15 kW (20.39 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swing over bed: 250 mm Distance between centers: 460 mm Spindle bore: 62 mm Max. spindle speed: 4,500 rpm Swing over removable bed: 460 mm MACHINE DETAILS Hjdezk D Anepfx Aa Eefi Control system: Fanuc 0i-Mate TO Power: 15.0 kW Dimensions & Weight Dimensions (L x W x H): 2,790 x 1,570 x 1,750 mm Net weight: 4,300 kg Transport packages: 2 EQUIPMENT Removable bed CE marking

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center width: 1,600 mm, center height: 275 mm, spindle speed (max.): 3,500 rpm, controller model: Fagor 8055, power: 15.5 kW (21.07 HP), No minimum price – guaranteed sale to the highest bidder! Hsdpozk D Abjfx Aa Eofi TECHNICAL DETAILS Maximum height over bed: 275 mm Swing over bed: 550 mm Swing over carriage: 310 mm Distance between centers: 1,600 mm Bed width: 420 mm Spindle bore: 82 mm Spindle speed: 80 – 3,500 rpm Maximum workpiece weight: 2,000 kg Swing over removable bed: 790 mm MACHINE DETAILS Control system: Fagor 8055 Power: 15.5 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,150 x 220 mm Net weight: 5,000 kg EQUIPMENT Fixed steady rest Removable bed Three-jaw chuck Travelling steady rest

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,975 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 635 mm, center width: 600 mm, center height: 340 mm, controller model: Siemens Sinumerik 840D SL, No minimum price – guaranteed sale to the highest bidder! Hjdjzk Dz Rjpfx Aa Eofi TECHNICAL DETAILS Maximum turning height: 340 mm Maximum turning length: 600 mm Turning diameter over bed: 680 mm Turning diameter over carriage: 565 mm Spindle bore: 65 mm Maximum spindle speed: 5,000 rpm X-axis travel: 260 mm Y-axis travel: 635 mm MACHINE DETAILS Control system: Siemens Sinumerik 840D SL Power: 25.0 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,500 x 2,300 mm Net weight: 6,500 kg Operating hours: 10,975 h EQUIPMENT Chip conveyor Three-jaw chuck

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 161, center width: 1,500 mm, center height: 250 mm, spindle speed (max.): 2,400 rpm, controller model: Heidenhain Manual-Plus, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning height: 250 mm Turning diameter over bed: 500 mm Turning diameter over slide: 340 mm Distance between centers: 1,500 mm Bed width: 315 mm Spindle bore: 80 mm Hfjdpfx Aezk Dwrea Eoi Spindle speed: 20 - 2,400 rpm MACHINE DETAILS Control system: Heidenhain Manual-Plus Programming: Teach-in Power: 11.0 kW Dimensions & Weight Dimensions (L x W x H): 3,150 x 1,650 x 1,800 mm Net weight: 2,500 kg EQUIPMENT Quick-change tool holder 3-jaw chuck CE marking

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Hfsdjzi Ihfopfx Aa Esi Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: used, machine/vehicle number: 007650, Max working width: 450 mm Hfjdpfou Evi Rex Aa Eei Max. machinable height: 120 mm Gluing System: EVA Hotmelt

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Hjdpfxsu Eviqo Aa Ejfi Gluing System: EVA Hotmelt

Condition: good (used), functionality: fully functional, machine/vehicle number: 302-101-4, travel distance X-axis: 110 mm, travel distance Y-axis: 55 mm, total width: 500 mm, total length: 1,000 mm, space requirement height: 1,100 mm, overall weight: 120 kg, For sale is a profile projector from the manufacturer Mitutoyo, type PJ 300. The item is in good condition. Technical data: Device type / series: Vertical profile projector PJ-300H Code No.: 302-101-4 Serial number: 81636 Manufacturer: Mitutoyo Corporation Screen diameter (effective): Ø 300 mm Projection image: Side-correct, upright Angle scale / rotation: 360° rotatable screen, digital angle counter Angle resolution: 1' or 0.01° Crosshair: 90° solid lines Standard objective magnification: 10X (optionally expandable to 20X, 50X, 100X) Hfodpfxszl Sr Te Aa Eji Through-light illumination (contour): Halogen light source (24 V, 150 W) with integrated heat protection filter / Telecentric system Top-light illumination: Halogen light source (24 V, 150 W) for excellent detail visibility Brightness control: 2-stage for optimal adjustment to the workpiece XY-axis detection: Integrated digital display (XY counter) directly next to the screen for ergonomic operation Interfaces: Data output RS-232C (for connection to measuring software, e.g. QM-Data200 or PC) Power supply: 100 - 240 V AC, 50/60 Hz Power consumption: approx. 400 W Net weight: approx. 110 kg - 120 kg Dimensions (W x D x H): 677 mm x 646 mm x 1,004 mm On request, transport and loading can be arranged throughout Europe for an additional charge. Prices are plus VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange is possible! Machine purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min Hfodpfx Aaju Ixw Aj Eei spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m The machine has seen very little use and was operated only in a repair workshop. Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs *

Condition: used, machine/vehicle number: 1717, Used lead and feed screw lathe WEILER PRAKTIKANT Centre height: 140 mm Hodpfouqb Emjx Aa Ejfi Distance between centres: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 pc 3-jaw chuck Ø160 mm, Chuck guard electrically interlocked, With Multifix toolpost size A with 3 holders Lever-operated collet device with 15 collets. The machine is located at our facility in 71334 Waiblingen-Beinstein and is immediately available. Viewing of the machine is possible by prior arrangement.

Condition: used, Year of construction: 2011, working diameter 20 mm working lenght 200 mm Drilling diameter – main spindle 10 mm Hsdpfx Aezl Hbvea Esfi spindle bore diameter 26,4 mm spindle tunring speed 10.000 U/min clamping diameter 20 mm Drilling diameter – Pick-up spindle 8 mm Speed ??pickup spindle 10.000 U/min Input power 10 kVA weight approx. 2.600 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres:1600mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm CROWNING Width of the crank: 300 mm Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Normal feed - rev. 1': 22÷1500 Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Transverse feed range at revolution: 0.02÷2 mm Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Quill barrel: 220 mm Quill taper - vices N. 5 POWER Hsdpfx Aajwz Rywo Eefi Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg 2000-2220 2530-2720 2920 ON REQUEST Main motor - HP

Condition: used, Year of construction: 2019, turning length 1000 mm Hodpfx Aaszl E T Ds Eefi turning diameter 210 mm swing diameter over bed slide 300 mm centre height 167 mm spindle bore 40 mm bed width 210 mm turning speeds 40 - 2500 U/min weight of the machine ca. 1000 kg. range L-W-H 2000 x 1000 x 1700 mm Features: - Digital display - 3-jaw chuck - Chuck guard - Multifix quick-change tool holder - Chip deflector - Chuck guard - Coolant system - Bed stop - Instruction manual

Condition: good (used), Year of construction: 2013, turning diameter over bed 520 mm Hsdpfjzl Hb Njx Aa Ejfi turning diameter over slide rest 330 mm turning length 1500 mm spindle bore 80 mm spindle turning speed - stepless 20-2000 U/min spindle drive 7,5 kW weight of the machine ca. 2,2 t

Condition: good (used), Year of construction: 1998, functionality: fully functional, turning length: 305 mm, turning diameter: 210 mm, spindle bore: 56 mm, spindle speed (max.): 25 rpm, spindle speed (min.): 5,000 rpm, Revolver lathe with 12 stations (non-powered) Tool holder: MK 3 Chip conveyor Bar feed tube: IRCO DS 34.8 (year of manufacture 2013) Hfodpfx Ajzl Ei Soa Eei Dimensions (L x W x H): - Machine: 4000 x 1700 x 1700 mm - Bar feed tube: 5500 x 1300 x 1500 mm Total weight: approx. 4,000 kg

Condition: good (used), functionality: fully functional, For sale is a robust lathe/woodturning lathe for processing wooden workpieces. The machine features a stable machine bed design, an adjustable tailstock, and an M33 spindle mount. With a center distance of 1,000 mm and a center height of 180 mm, the machine is suitable for various turning operations and longer workpieces. Technical data: Overall length: approx. 1,520 mm Overall width: approx. 520 mm Center distance: approx. 1,000 mm Center height: approx. 180 mm Spindle mount: M33 Speeds: 1,000 / 1,700 / 2,700 rpm Motor power: 0.9 kW Voltage: 240 V Weight: approx. 45 kg Adjustable tailstock Tailstock with quill and handwheel Belt drive Stable machine bed design Used machine with signs of wear and tear consistent with age and use. The condition can be seen in the photos. Inspection and test run possible by appointment. Transport possible for an additional charge! Hsdpszl D Rnofx Aa Ejfi The machine will be inspected before sale. Due to the age of the used machine, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: used, Control system: Siemens 3-T Faceplate: 1500 mm Max. turning diameter: 1800 mm Max. turning height: 600 mm X-axis travel: 1995 mm Z-axis travel: 750 mm Faceplate speed: 260 RPM Main motor: 66 kW Milling motor: 31 kW Milling spindle speed: 3000 RPM Hfjdpfx Aaezl D Rhj Eji Tool changer: 26 positions Machine is disassembled. Many tools and spare parts included.