Used Profile Cleaning for sale (11,745)

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Ledpfx Apezkkc Usmjhk Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Condition: new, Year of construction: 2025, HW 3 in 1 Welding cleaning Cutting with 2kw Max laser power is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price Welding seam requirements: ≤0.5mm Welding speed: 0-120mm/s Cooling method: dual temperature dual control intelligent refrigerator Operation temperature range: 5-40℃ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts Lhsdpfx Apek Radijmsk are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. Lodpfxev S Diho Apmohk While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system Lsdpfx Aow A H T Aopmjhk One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: as good as new (ex-display), Year of construction: 2025, The brush washbasin LCT bio.x C100 is the proven classic in a new design and with optimized equipment technology. It impresses with its extraordinary stability and load-bearing capacity. The spacious work surface enables barrier-free and comfortable working. - stable construction - particularly low-maintenance - high load capacity - Energy-saving mode for downtimes such as nights or weekends - A flexible articulated hose allows easy rinsing of the parts - Optimum cleaning performance by heating the cleaner to 41 °C The workpieces are rinsed off through a nozzle. With With the help of the flexible articulated hose, the nozzle in the desired position can be fixed. The cleaning brush supports the cleaning strongly dirty parts. The large cleaning surface enables effective cleaning To work. High carrying capacity of the washer due to stable device construction. Device is made of plastic and is therefore very stable and corrosion-free. Easy to transport using a lift truck. Multi-stage filter system, consisting of coarse screen, fine screen and magnet. In addition, a washable filter bag holds (fineness: 100 μm) finest impurities back before they get into the bathroom. A functional control with soft-touch control panel guaranteed by choosing the energy saving mode Energy savings of approx. 50%. All electronic components of the device are in one compact technical unit. Our LCT bio.x C100 can be used with the following label-free cleaners Lsdsh S Undspfx Apmshk be driven LCT BioLiquid LCT Bio Liquid Special LCT Bio Liquid Power: LCT coconut cleaner LCT Coconut Cleaner Alu LCT Coconut Cleaner low-foaming

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 35 h, functionality: fully functional, total width: 87 mm, total length: 120 mm, maximum load weight: 200 kg, heating capacity: 7.2 kW (9.79 HP), tank capacity: 400 l, warranty duration: 24 months, type of input current: three-phase, inner dimension height: 600 mm, inner dimension length: 800 mm, inner dimension width: 500 mm, overall weight: 150 kg, input voltage: 400 V, input frequency: 50 Hz, workpiece weight (max.): 200 kg, LCT NW 180 BSS demonstration tank Lsdpfoq Rd R Dox Apmshk Dual frequency 27/80 kHz Ventilated stainless steel control cabinet Hinged lid Tank completely insulated Stainless steel washing cork with four crane eyes and a basket bar for lifting Four adjustable feet for uneven floors Floor emptying via ball with inclined tray base for complete emptying Floor grating Bottom and 2 x side sound with a total output of 3000 watts Timer with timer and program control Connected load 10.2 KW

Condition: excellent (used), Year of construction: 1994, Weinig 925 Rondomat profile knife grinder Lhodpfx Apjn Ut Slsmjk Stock code: 15443 Price: request for quotation $ Subcategory: Knife grinders Producer: Weinig Model: 925 Condition: used Tag number: 15443 Machine type: Grinding machines UMCC: G6775 Producer: Weinig Model: 925 Rondomat Year: 1992 Serial number: 925-438 Description: Weinig 925 Rondomat profile knife grinder We offer turnkey services with this machine. Printable page Get a quote General technical data Shaft length 9-1/2 inches Maximum tool diameter 9 inches Motor 1.5 HP, 220/440 V 8-7/8 Maximum wheel diameter Variable grinding wheel speeds: 1700, 2000, 2250, 2800 rpm Relief angle for back relief: 15 - 45 degrees Axial: 0 - 10 degrees Cooling liquid

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! MACHINE DETAILS Control: Teach-in Motor power: 4.0 kW Ledpfozuw D Tox Apmohk Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Documentation CE marking CE certificate

Condition: like new (used), Blockhouse profile cutter, with teeth on the back. Ledpfxjzvzu So Apmjhk

Condition: used, Adjustable cutters on a hydraulic sleeve for the production of log planks (tongue and groove). Current settings: Groove profile width: 58.45 mm Tongue profile width: 53.25 mm Technical data: Lsdpfx Apozvnbfjmohk - Cutter: HW - Cutting circle (ø): ~ 160 mm - Bore: 50 mm - Material: Steel

Condition: used, The scope of delivery includes: Lhsdezvlrnspfx Apmsk 1x steel beam, used Material color: orange Box profile: 130 x 40 mm Agraffe: 4 HK (hooks) Overall length: approx. 2,780 mm Length of box profile: approx. 2,680 mm Note: This is a former pallet rack crossbar that can no longer be used in its current form. If you separate the agraffe here, you will obtain a box profile with a length of approx. 2,680 mm. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Lhedpfx Aezvlm Espmek Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration

Condition: new, clear span: 2,700 mm, total length: 2,760 mm, The scope of delivery includes: 1x Push-through protection, new Lodjzu Stcepfx Apmshk Type: universal Suitable for field width: 2,700 mm Customs tariff number: 73066192 Steel grade: S235 | S275 Consisting of EACH: 1 x Square tube, new Material color: hot-dip galvanized Dimensions: 50x50x2.0 mm Weight: 3.26 kg | per meter Tube length: approx. 2,760 mm 2x Angle bracket, new Material color: sendzimir galvanized Design: Holding device Profile dimensions: 155 x 120 mm Headplate: 120 x 40 mm Overhang: 75 mm Design: 90 degrees Opening for square tube: 51 x 51 mm Material thickness: 3.00 mm Weight / piece: 0.460 kg Incl. each: 4 x Screws, M8 x 20 mm 4 x Nuts, M8 4 x Washers, M8 2 x Drill screws, self-tapping 25 mm You can also request the following lengths: (For field width:) 1,350 mm = 19.00 € plus 19% VAT 1,800 mm = 26.00 € plus 19% VAT 1,900 mm = 27.00 € plus 19% VAT 2,000 mm = 29.00 € plus 19% VAT 2,100 mm = 30.00 € plus 19% VAT 2,200 mm = 31.00 € plus 19% VAT 2,300 mm = 33.00 € plus 19% VAT 2,400 mm = 34.00 € plus 19% VAT 2,500 mm = 36.00 € plus 19% VAT 2,600 mm = 37.00 € plus 19% VAT 2,800 mm = 40.00 € plus 19% VAT 2,900 mm = 41.00 € plus 19% VAT 3,000 mm = 42.00 € plus 19% VAT 3,100 mm = 44.00 € plus 19% VAT 3,300 mm = 47.00 € plus 19% VAT 3,600 mm = 51.00 € plus 19% VAT 3,900 mm = 55.00 € plus 19% VAT 4,300 mm = 61.00 € plus 19% VAT General information about the article: This article is only offered for collection. Any additional transport or shipment of this article will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2004, Technical details: Basket size LxWxH: 530 x 320 x 200 mm Max. basket weight: 50 kg capacity: 4 Körbe/h; baskets/h No. of washing chambers: 1 Ljdpfjzu St Nex Apmehk No. Of tanks for washing: 1 No. Of tnks for conserving: 1 Cleaning medium: Tetrachlorethen Electrical heating power: 42 kW Machine size LxWxH: 4 x 3 x 2 m

Condition: used, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm BPR Brescia – Model C-602-HE, hydraulic 3-roll profile and pipe bending machine Technical Data BPR C-602-HE Specifications Manufacturer BPR – Brescia, Italy Model C-602-HE Lodpfx Ajzu A U Djpmshk Type Hydraulic 3-roll bending machine Operation Horizontal and vertical Number of rolls 3 Roll diameter 100 mm Shaft diameter 60 mm Shaft length 150 mm Max. roll spacing (center-to-center) 400 mm Motor power 2.2 kW Mains voltage 380 V Dimensions approx. 850 × 1,120 × 1,700 mm Weight approx. 1,100 kg Hydraulic feed Yes Rotation direction Clockwise/counter-clockwise Information subject to change / without guarantee

Condition: new, clear span: 2,700 mm, total length: 2,780 mm, The scope of delivery includes: 1x Push-through safety device, new Type: universal Suitable for field width: 2,700 mm Customs tariff number: 73066192 Consisting of EACH: 1 x Rectangular tube, 2nd choice (new goods) Material color: RAL 5010 blue Dimensions: 50x40x2.0 mm Weight: 2.64 kg | per meter Borehole diameter: 9 mm Lhodpfozu Andox Apmsk Tube length: 2,780 mm Center-to-center distance: 2,740 mm 2x Corner angle bracket, new Material color: sendzimir galvanized Design: Mounting bracket Profile dimensions: 155 x 120 mm Head plate: 120 x 40 mm Overhang: 75 mm Design: 90 degrees Opening for square tube: 51 x 51 mm Material thickness: 3.00 mm Weight / piece: 0.460 kg Incl. each: 4 x Screws, M8 x 20 mm 4 x Nuts, M8 4 x Washers, M8 2 x Screws, M6 2 x Nuts 2 x Washers You can also request the following additional lengths: (For field width:) 1,350 mm = €18.00 plus 19% VAT 1,800 mm = €23.00 plus 19% VAT 1,900 mm = €25.00 plus 19% VAT 2,000 mm = €26.00 plus 19% VAT 2,100 mm = €27.00 plus 19% VAT 2,200 mm = €28.00 plus 19% VAT 2,300 mm = €29.00 plus 19% VAT 2,400 mm = €31.00 plus 19% VAT 2,500 mm = €32.00 plus 19% VAT 2,600 mm = €33.00 plus 19% VAT 2,800 mm = €36.00 plus 19% VAT 2,900 mm = €37.00 plus 19% VAT 3,000 mm = €38.00 plus 19% VAT 3,100 mm = €39.00 plus 19% VAT General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2019, - 6 working spindles - max. working width 250 mm - feed rate 6 - 24 m/min used planing and profiling machine Manufacturer: HOMAG Type: Optimat LPP306 Year of construction: 2019 OPTIMAT LPP306 Planing and profiling machine with 6 working spindles. Workpiece width after processing: - min. 10 mm - max. 250 mm Workpiece height after processing: - min. 10 mm - max. 160 mm Control system: - PowerControl with powerTouch LPP300 Infeed table 2,500 mm Feed rate min. 6 m/min max. 24 m/min FIRST LOWER SPINDLE: - Spindle motor power 7.5 kW - Siemens IE3 energy-saving motor Power speed range: - 7.5 kW - 6,000 rpm Spindle diameter 40 mm Spindle length 281 mm FIRST RIGHT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 176 mm FIRST LEFT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length: 176 mm Total length: 176 mm FIRST UPPER SPINDLE: - Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm SECOND UPPER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm SECOND LOWER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor Lhsdpjzuzf Uofx Apmsk - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 Lsdpfx Aozuzfhopmshk - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Lodpfx Ajzuzfbspmohk Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment Lhedpfx Ajzuzb Aspmok 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell Lhodpozuy Stofx Apmjk • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW Ljdpozuy Injfx Apmshk • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-Phase

Condition: like new (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: DN1792, Tiger Lifting Equipment – Kurschildgen GmbH, Lifting Equipment Manufacturing Spindle gripper, gripper with handwheel and positively locking gripping arms for lifting a hexagonal contour using a crane. Load capacity: 400 [kg] Type: ST-SU-040-600_6KT-06357 Gripping width: 600 [mm] Gripping breadth: 180 [mm] Payload: 400 kg Weight: 75 kg Lhodpozv E Ddofx Apmok 6 units available!!! Like-new condition with minor signs of use, see images. Item location is 75053 Gondelsheim. See images. Shipping via freight forwarder or collection by appointment only.

Condition: excellent (used), Technical data: 2 rollers, hydraulically adjustable 2 support rollers 3 driven rollers NC control Shaft diameter: 80 mm Shaft length: 160 mm Roller diameter: 224 mm Motor power: 5.5 kW Mobile control panel Ljdpfx Apozv Ernemjhk Dimensions (length x width x height): approx. 1240 x 1460 x 960 mm Weight: approx. 1.4 tons Condition: very good condition, little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface Lhsdozv Eaxepfx Apmek 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.