Used Profile Bender for sale (6,321)

Condition: new, Year of construction: 2026, Bending machine ZB 70/2 H- with foot pedal- with standard roller setTECHNICAL SPECIFICATIONS:- two driven shafts, knurled surface - hydraulic adjusting of the center roller- working position horizontal and vertical - digital readout with memory- shafts are supported by conical bearings- slide bars on the slide-support are exchangeable- shaft diameter: 40 mm- roller diameter: 152/162 mm- shaft rpm: 8,5 U/min- voltage: 400V 50Hz 3Ph- drivingmotor: 1,1 kW- motor for hydraulic: 1,1 kW- hydraulic pressure: 8 to.- adjusting way: 120 mm- weight: 470 kg- dimensions: 900x600x1100 mm Kedsdktnkjpfx Apmjna

Condition: excellent (used), functionality: fully functional, GAIANI PROFILE BENDING MACHINE DIAMETER 40 3 ROLLERS HORIZONTAL USED, FUNCTIONAL MACHINE INTERNAL CODE: SVR 370 Knodpfx Ajznm Hkopmoa

Condition: as good as new (ex-display), Year of construction: 2026, shaft diameter: 60 mm, bending machine model AHB 60 ZOPF - three roller driven Ksdpfxodkxvmo Apmena - two hydraulic adjustments - 2 digital readout with memory - standard roller set - horizontal and vertikal use - 60 mm shaft HS-Code: 8462 2998

Condition: used, functionality: fully functional, PROFILE BENDER FOMP Knedpsv Ifq Ejfx Apmsa DIMENSIONS: 160X120X115 (h) cm, WEIGHT: 1300 KG

Condition: used, functionality: fully functional, ---EURING PROFILE BENDER CM 2000 (N.1), SHAFT 30, 2 ROLLER DRIVES. DIMENSIONS: 70X55X145 (h) cm, Weight: 200 kg ---EURING PROFILE BENDER CM 2000 (N.2), SHAFT 30, 2 ROLLER DRIVES. DIMENSIONS: 70X55X145 (h) cm, Weight: 200 kg Knodpfswn Hz Rsx Apmoa

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 000464, Max. pipe diameter Ø 42 mm Min. pipe diameter Ø 6 mm Max. pipe thickness 2.5 mm Max. bending radius 270 mm Min. bending radius 25 mm US metric: Max. pipe diameter 1.654 inch Min. pipe diameter 0.236 inch Max. wall thickness 2.5 inch Max. bending radius 10.63 inch Min. bending radius 0.984 inch Throughput: 42; Rotation angle: 187°; Digital display: yes; Motor power: 95 kW; Electrical connection: 380 V; Machine weight: 1550 kg; Kodpevmpbrofx Apmsna Dimensions: 4700 mm; Width dimension: 800 mm; Height dimension: 1300 mm;

Condition: used, Year of construction: 1990, pressure 35 t no. of strokes ca 72 Hub/min Ksdpfsztf Anjx Apmena dayligth 195 mm total power requirement 1,5 kW weight of the machine ca. 330-400 kg

Condition: used, Year of construction: 1970, rechts Ausklink / links S fence elektronisch ja /nein Knodjztf Ahjpfx Apmja foot pedal mechanisch weight of the machine ca. 1,3 t

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) * with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf - Assortment of punches and dies Kjdpfx Ajznng Sepmjna - Original operating instructions

Condition: excellent (used), For sale: a Karl Tränklein Case Bender, a machine designed for shaping and bending the spines of hardback book covers. The device gives the covers the appropriate curvature, ensuring a perfect fit to the book block. The machine is equipped with adjustable rollers, allowing for adaptation to different cover thicknesses. The robust cast iron construction ensures high precision and long-lasting durability. Technical data: Manufacturer: Karl Tränklein Type: Case Bender / spine forming machine Working width: approx. 600 mm Adjustable roller pressure Stable cast iron construction Electric drive Work table Condition: used Applications: Production of hardback books, Bookbinding, Printing companies, Knjdpfx Apeziwnbemsa Graphic arts companies, Production of albums, catalogs, and covers.

Condition: good (used), Mubea Muhr und Bender section shear combined Knjdpfx Apjncc Hujmja Type: KBL 16 Dimensions: 200x75x197 cm LxWxH

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure Knjdpfx Apju Id Rusmsa - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! * Kodpfxjxu Dxqo Apmona

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm Knsdpju Ickyjfx Apmea number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, mileage: 1,001 km, first registration: 01/1999, color: orange, driver cabin: other, gearing type: other, loading space volume: 16 m³, loading space length: 5,600 mm, loading space width: 2,300 mm, loading space height: 1,250 mm, Year of construction: 1999, Vehicle location: Bovenden, steel superstructure, flap Body: Bender tipper body approx. 16m³, hydr. flap opening, roof protection, Hardox body Frame width rear 770mm Body is dismantled from Daimler Benz SK 3544 8x8 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Kjdpevhig Rsfx Apmsna - .

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Kodpfxsw A H T Aj Apmjna Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: good (used), Muhr + Bender KBL 16 Optima Muhr und Bender Optima KBL 16 Knsdpfx Apjyy S E Sjmja Round steel 45 mm Square steel 42 mm Angle steel 90×9 mm Throat depth of punch 500 mm

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Knodoyvvkwopfx Apmsa Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: excellent (used), Year of construction: 1994, Weinig 925 Rondomat profile knife grinder Stock code: 15443 Price: request for quotation $ Subcategory: Knife grinders Producer: Weinig Model: 925 Condition: used Tag number: 15443 Machine type: Grinding machines UMCC: G6775 Producer: Weinig Kodpfx Aen Ut Slepmona Model: 925 Rondomat Year: 1992 Serial number: 925-438 Description: Weinig 925 Rondomat profile knife grinder We offer turnkey services with this machine. Printable page Get a quote General technical data Shaft length 9-1/2 inches Maximum tool diameter 9 inches Motor 1.5 HP, 220/440 V 8-7/8 Maximum wheel diameter Variable grinding wheel speeds: 1700, 2000, 2250, 2800 rpm Relief angle for back relief: 15 - 45 degrees Axial: 0 - 10 degrees Cooling liquid

Condition: used, Year of construction: 2016, functionality: fully functional, A flexible induction bending machine (Liming Electrical & Machinery Factory) for bending and curving tubes (pipes), box sections, wide flange beams, and channels. This 30” capacity induction bending machine was installed in 2017 at our works in Oldbury in the UK. THE MACHINE CAPACITY: Tube / Pipes From Ø165 up to Ø762 6" up to 30" (USA) Beams (easy way & hard way) IPE 600 & HEB 600 W27 x 178 (USA) Knedsupia Nopfx Apmoa Box Sections 100 x 100 up to 500 x 500 4" x 4" up to 20" x 20" (USA) Channels UPN 50 up to UPN 400 C6 x 8.2 up to C15 x 50 (USA)

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering Knjdpfx Apjium Euemja - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal - cuts reinforcing steel up to Ø 50 mm - workshop overhauled Special tools and devices on request. Kodpjqfgy Hofx Apmena Trade-in of used machines. Europe-wide delivery possible.

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: Kedpfxeium Sts Apmsna - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! Knodpfxszuw D Ts Apmja MACHINE DETAILS Control: Teach-in Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Documentation CE marking CE certificate

Condition: like new (used), Blockhouse profile cutter, with teeth on the back. Kodpozvzu Sofx Apmena