Used Plastickoil Concep Qs for sale (183)

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates Bodpfew Nafksx Amyjdf - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), cutting height (max.): 105 mm, cutting width (max.): 2,100 mm, saw blade diameter: 350 mm, total length: 4,300 mm, The FIMAL CONCEPT 350 ELITE is the further development of the proven CONCEPT 350 PLUS, setting new standards in precision, safety, and efficiency. With a reinforced machine base, optimized extraction system, and a redesigned Multistop fence table, it offers even greater comfort and performance for joiners, furniture makers, and industrial panel processing. Thanks to its pressure beam with automatic feed, the ELITE combines the flexibility of a sliding table saw with the cutting quality of a pressure beam saw – all within a footprint of just 28 m². Technical Specifications ⦁ Aluminum machine and extension tables ⦁ Saw unit tiltable up to 46° Bdsdpfx Asw Axf Romyjf ⦁ Pressure beam, including LED lighting with 3 different action colors: WHITE: Machine in stand-by RED: Pressure beam lowering or emergency-stop function BLUE: Saw unit in motion ⦁ Versatile support table 1,000 x 500 mm ⦁ Scoring system via the main saw blade (co-rotating) ⦁ Automatic workpiece length detection for minimal travel distance ⦁ Mobile and height-adjustable control panel, including: Saw blade holder, template holder, emergency-stop button, start button, selector switch for grooving/scoring/cutting, rotary switch for feed speed, switches for laser (option) and USB socket ⦁ Max. saw blade projection (350 mm blade): 100 mm at 90° / 70 mm at 45° ⦁ Saw blade: diameter 300 – 350 mm, bore 30 mm ⦁ Saw blade speed: 4,000 rpm ⦁ Motor: 5 kW (= 7.5 HP) ⦁ Feed speed: 0 – 40 m/min ⦁ Total length: approx. 4,250 mm ⦁ Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) ⦁ Required air pressure: 7 bar ⦁ Extraction port: 1 x 100 mm, 1 x 120 mm ⦁ Extension table length: 3,670 mm / 4,270 mm / 4,870 mm (total length) ⦁ Tilting range: 0 - 46° ⦁ Sliding table: 1,000 x 400 mm (extension table) ⦁ Crosscut fence: 3,200 mm with 2 digital flip stops ⦁ Speed: 4,000 rpm ⦁ Air requirement: 6 bar ⦁ Motor voltage: 400 V (50 Hz) ⦁ Feed speed: 0 - 40 m/min Options Multistop, cutting width 2,100 mm instead of 1,300 mm Programmable saw blade height adjustment Miter fence +/-50° Cutting line laser Including delivery and installation within postal code areas 71,72,73,77,78,79,86,87,88,89

Condition: new, Year of construction: 2007, color: yellow, power: 1,000 kW (1,359.62 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 1,850 mm, Empty weight: 5.840 kg Generator capacity: 750 kVA Current frequency: 50 Hz Bsdpoyxmwyjfx Amysdf Voltage: 400

Condition: used, machine/vehicle number: 008648, Max. working width: 1300 mm Max. working thickness: 60 mm Number of painting guns: 4 Bdodpfxjzmmulo Amyef

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 Partnership Edition General features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam including LED lighting with 3 different status colors: WHITE: Machine in idle position RED: Pressure beam lowering or emergency stop function BLUE: Saw unit moving; variably positionable support table 1,000 x 500 mm Bdjdpfx Amjzmf Iqoysf - Scoring system using main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel including: saw blade holder, template holder, emergency stop button, start button, selector switch Scoring/grooving saw, rotary switch for feed speed, switches for laser (option) and USB socket Partnership Edition includes: - Motorized rip fence with 4 aluminum stops, synchronized positioning. All four stops adjustable up to 1,300 mm. The table is approx. 2,000 mm long. - Windows 10 screen control (10'' touchscreen). The graphical interface offers the following functions: tool database, miter cut calculation at the length stop, cutting plans can be created and saved, programs can be saved, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm including 2 digital displays Technical data: - Max. saw blade protrusion 350 mm blade: 100 mm at 90° / 70 mm at 45° - Saw blade: diameter 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (approx. 7.5 hp) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and equipment) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm Includes: - Motorized rip fence with 4 aluminum stops, adjustable up to 2,100 mm instead of 1,300 mm - Cutting line laser - Saw motor with 7.5 kW (10 hp) including automatic star-delta startup - Programmable saw blade height adjustment including height correction when tilting the saw unit - Mitre fence tiltable +/- 50° with length compensation Location: Flörsheim am Main Availability: by arrangement

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Bjdpfx Aey In A Nsmyodf Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Bdjdpfxjy In Dgj Amyef

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Bdjdpfey In A Aex Amysf

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4) Bjdpfxjwz Ic Ao Amyodf

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Bdedpfod Rcigex Amysf Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 Free space (to add a Grooving Milling Unit)

Condition: good (used), Year of construction: 2004, functionality: fully functional, 1,0 used injection molding machine with robot Manufacturer: DEMAG Type: ET250-840 Concept Year of manufacture: 2004 Clamping force: 250 tons Tie bar spacing: 630 x 630 mm Screw diameter: 60 mm Max. shot volume: 636 cm³ Shot weight: 579 g/shot Control system: NC4 Equipment: Bedpfx Amszl Tvgeyjdf Robot manufacturer: WITTMANN, Type: W633-931 2 core pull units

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Cummins QSK60-G4, General information Field of application: Construction Weights Empty weight: 16.160 kg Functional Generator capacity: 2.250 kVA Bedpfx Aexwhubemyjdf Dimensions of cargo space: 618 x 229 x 254 cm CE mark: yes Other information Fuel consumption: 291 Liter per Hour at 75% Load Generator: Stamford PI734G Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel

Condition: ready for operation (used), Year of construction: 2020, total height: 1,485 mm, total width: 680 mm, overall weight: 1,496 kg, product length (max.): 5,618 mm, This 5-axis CEHISA PRO 12 CONCEPT edgebander was manufactured in 2020. It accommodates edgebanding materials from 0.4 to 8 mm and has a maximum edge height of 65 mm. The machine features a feed speed of 9/14 m/min and a total electrical output of approximately 12.9 kW. If you are looking to get high-quality edgebanding capabilities, consider the CEHISA PRO 12 CONCEPT machine we have for sale. Contact us for further details. Bdedpezltbcofx Amyof • Edgebanding material (coils): 0.4–3.0 mm (0.016"–0.12") • Edgebanding material (solid wood strips): up to 8 mm (0.31") • Maximum edge height: 65 mm (2.56") • Panel thickness (min–max): 10–60 mm (0.39"–2.36") • Minimum panel length: 120 mm (4.72") • Minimum panel width: 70 mm (2.76") • Feed speed: 9 / 14 m/min (30 / 46 ft/min) • Note: 9 m/min when corner rounding is active • Total electrical output: approx. 12.9 kW • Pneumatic supply: 6–7 bar (87–101 psi)

Condition: used, Year of construction: 2006, Operating hours: 30,471,625 Bsdjzlg Uvepfx Amyodf Clamping force: approx. 800 t Tie bar spacing: approx. 420 mm Flow rate: approx. 103 l/min Frequency: 50 Hz Power supply: 400 V Pressure: approx. 210 bar Current: 82 A Weight: approx. 4.0 t

Condition: new, Year of construction: 2026, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm Bdedovk R Aropfx Amyof - Belt drive motor 3 KW, 380 V, 50 Hz - Oscillation stroke programmable 10 - 90 mm - CE compliant/dust tested Standard version Kündig Uniq - S Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller - Z04 table extension Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams Bdedpfxjw Sgnko Amysf - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. Bsdpey Egz Ssfx Amyodf - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit Bdodpfx Amsfig Rwsyof The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Laminated panel press from our showroom; Bdjdeb Eln Depfx Amyof Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. Bjdpohqb Rcefx Amyjdf 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) Bedpfx Amsiidm Nsyedf - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: ready for operation (used), Heidenhain QSY 155D 339 881-14 feed motor SN: 20733875D, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this article. Please ask for price separately! Bsdpfxjty Hkuj Amyodf

Condition: ready for operation (used), Heidenhain LE 355 Q control unit. Serial number: 2937133, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bdedpfji Eam Djx Amyef

Condition: ready for operation (used), Heidenhain QSY 190F EcoDyn SN: 25 342 980 C, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this item. Please ask for price separately! Bdjdpeu T Uviofx Amysf

Condition: ready for operation (used), Heidenhain QSY 155D 339 881-14 feed motor SN: 24312450E, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this article. Please ask for price separately! Bdsdjty Hkzjpfx Amyjf