Single Edgebanders

HOMAG EDGETEQ S-500

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) Hjdpfxeztpw Ns Aanonr - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Hodpfx Asx Aqdcoanonr Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Hnjdpey In A Nofx Aanor Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008585, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Hsdpfx Aasy In A Asnjnr Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 Hnjdoy A D Ecjpfx Aanor for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Hedpfx Aaozku Rpensnr Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, glue application unit, airTec technology, trimming units, milling units, rounding units, Hnodpfx Aozkmqzeanor sanding units, polishing units. Additional equipment: HOMAG XES 200 service station.

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min Hedpfx Aaox A Hfvsnenr

Condition: good (used), Year of construction: 2000, Special-purpose machine, not a through-feed machine but a support machine, approximately 150 cm long where the workpiece is clamped. 4 units positioned transversely to the feed direction. It was used for intermediate sanding of polyester lacquer to achieve high-gloss finishes on dashboard panels for luxury cars. The total machine length is 12 m. Hnedpfjxivbmsx Aanor

Condition: used, machine/vehicle number: 008111, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Hnedpfx Aasy Dq Iaonjr Operating Units: 9 nr