Used Plastickoil Concep Qs for sale (178)

Condition: new, Year of construction: 2026, machine/vehicle number: 20251112018, fuel type: diesel, motor manufacturer: Cummins QSK19-G11, General information Dsdoxb Nx Aopfx Adajkk Field of application: Construction Weights Empty weight: 7.200 kg Functional Generator capacity: 800 kVA CE mark: yes Other information Fuel consumption: 115 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A49B Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1065 l Transport dimensions (LxWxH): 5x1,95x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Year of construction: 2022, condition: used, Number of sanding units 6 st. Sanding height max. 120 mm Dksdeynnttjpfx Adask output 12 kw

Condition: excellent (used), Mitutoyo Type: QS250Z Dksdpfx Aeynkbajdaok Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture: 2017 – incl. software & accessories For sale is a high-quality Mitutoyo QS250Z CNC vision measuring machine from 2017, in excellently maintained condition. This is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics technology, and much more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: - 2D coordinate measurement - Contour and profile measurement - Distance, radius, angle, and diameter determination - Measurement of bores, grooves, edges, and complex geometries - Serial measurements with automated measurement programs - Documentation and report generation via Mitutoyo software Measurement is non-contact via a high-resolution camera system with image processing. Ideal for sensitive or small parts where tactile measurement is unsuitable. Thanks to CNC control, automated measurement procedures are possible – perfect for recurring testing processes. Technical data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): 150–200 kg Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) - Mitutoyo QS250Z main unit - Joystick box - Software package: - QS-ConfigDisk - QSPAK - FORMTRACERPAK-AP - MiCAT Vision / Form - Manuals & documentation - Various electronic boards (see pictures) - Further accessories as shown (Technical data and information subject to change and error!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 250 mm cutting range min.: 110 mm Dkedpfx Adjym Ukceaek saw blade diameter: 3100 x 27x 0,9 mm square: 220 mm flat: 275x170 mm cutting speed: 37/74 m/min total power requirement: 1,1/1,5 kW weight of the machine ca.: ca. 500 kg

Condition: reconditioned (used), Year of construction: 2019, machine/vehicle number: 0-261-04-6440, functionality: fully functional, Feeding and removing of workpieces: • Pressure beam with rollers • Variable feed speed 8-14 m/min • Automatic grooving fence • Glue pot QA65 Edge banding: • Multifunctional profile scraping unit with R-2 and R-1 tools • Corner rounding unit with R-2 tool Finishing of the workpiece: • Anti-adhesive and cleaning fluid • End trimming unit • Edge milling unit with R-2 and R-1 tools • Flat scraper, top-bottom polishing unit • Prepared for connection to a return system Documentation • Selected language: Polish • Documentation in machine control, in printed form General information • Year of production: 2019 • Machine length: 5573 mm Dkodpfx Adoykzdkjaek • HOMAG control - POWER TOUCH • CE mark • Processed meters: 800,000

Condition: good (used), Year of construction: 2006, Controll: NC4 Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Dsdpfx Asrgw Exodaskk Screw diameter: 50 mm Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Year of construction: 1997, condition: used, Year of manufacture 1997 Serial number 9937 Working area X 3100mm Working area Y 600mm Working area Z 850mm Main motor 4 x 5Kw 5-axis machine Number of milling spindles 4 Dksdpfx Ajmhf E Nsdaek Number of revolutions max 1800 1 table 3000mm x 550mm

Condition: used, Year of construction: 2025, machine/vehicle number: K24I158166, fuel type: diesel, power: 35 kW (47.59 HP), motor manufacturer: Cummins, Field of application: Construction Djdpfxsv Uhquj Adaskk Empty weight: 842 kg Generator capacity: 38 kVA Transport dimensions (LxWxH): 1.96x0.82x1.28 Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, volume flow: 3,000 m³/h, total width: 2,200 mm, total length: 10,600 mm, total height: 2,350 mm, Biofilter System for Odor Reduction – bioteg MCBF 3000 QSW For sale is a bioteg MCBF 3000 QSW biofilter system designed for exhaust air purification and odor reduction, suitable for an airflow rate of up to 3,000 m³/h. The system was decommissioned due to regulatory requirements, is technically complete, and was engineered for fully automatic, continuous outdoor operation. The installation comprises a double-walled biofilter container (outer shell made of steel, inner lining PE-HD), a pre-connected air humidifier (cross-flow scrubber), a radial fan with frequency converter, as well as a separate technical compartment with control cabinet. The filter bed is filled with approximately 30 m³ of durable, longitudinally-shredded root wood, offering high shape stability and low compaction. The biofilter system complies with VDI guideline 3477 and ATV leaflet 204 and achieves high purification performance (including up to 97% odor reduction, 98% H₂S, and 97% NH₃ at design conditions). Maintenance requirements are low (regular visual inspections, annual servicing). Typical areas of application: Djdpfsyhwacsx Adaskk Waste treatment facilities, composting plants, wastewater treatment plants, industrial exhaust air purification, municipal waste management operations. Further technical documentation, dimensions, performance data, and viewings available on request.

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Dodpfjx Uqb Isx Adaokk Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Air valve: 1x Robot interface Machine is supplied with robot

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 100 mm, travel speed (max.): 4,800 mm/min, Equipment: lighting, We offer this very good Mitutoyo QS250Z optical three-dimensional measuring system, coordinate measuring machine, year of construction 2010. It offers a measuring range of X = 200 mm, Y = 250 mm, Z = 100 mm and a maximum traverse speed of 80 mm/s. The machine includes a 1/3" color CCD camera and various lighting options, enhancing visibility and accuracy. Ideal for detailed component analysis, take the opportunity to acquire this Mitutoyo Quick Scope QS-250Z coordinate measuring machine. Contact us for more information about this machine. A Xeon computer with QSPAK and Cosmos licenses completes the product. Additional photos and the full brochure available on request. Additional equipment: 0.5× optics 2.5× optics Cosmos software Model: QS250Z Code Number: 359-508-9EU Sales Order Number: Serial Number: 308041009 Dkedeyfwvfepfx Adaek Manufacture Year: 2010 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, - NEW - Concept 350 ELITE Partnership Edition - Cutting length 3200 mm - General Features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam, incl. LED lighting with 3 different indicator colors: WHITE: Machine in standby RED: Pressure beam lowering or emergency stop function BLUE: Saw unit in operation - Variable support table, 1,000 x 500 mm - Scoring system via main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel, incl.: Saw blade holder, template holder, emergency stop button, start button, selector switch for grooving / scoring / sawing, feed speed rotary switch, switch for laser (option), and USB socket Partnership Edition includes: - Motorised rip fence with 4 aluminium stops, synchronized traversing All 4 stops travel up to 1,300 mm. Table length approx. 2,000 mm. - Windows 10 display control (10" touchscreen). The graphical interface offers the following functions: Tool database, mitre cut calculation at the length stop, Cutting plans can be created and saved, programs can be stored, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm, including 2 digital displays Technical Specifications: - Max. saw blade projection: 350 mm - Saw blade: 100 mm at 90° / 70 mm at 45° - Saw blade diameter: 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (= 7.5 HP) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and configuration) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm - Order No.: FIMAL379 Including: - Motorised rip fence with 4 aluminium stops, traversing up to 2,100 mm instead of 1,300 mm. Order No.: 47/17 Djdowzmvbopfx Adajkk - Cutting line laser Order No.: 3410451 - Saw motor with 7.5 kW (10 HP) incl. automatic star-delta start Order No.: Programmable saw blade height adjustment incl. height correction when tilting the saw unit Optional accessories at extra cost: - Mitre stop +/- 50° tiltable with length compensation Order No.: 3380132 including telescopic stop and folding stop

Condition: excellent (used), Year of construction: 2014, operating hours: 943 h, functionality: fully functional, machine/vehicle number: B14K635476, fuel type: diesel, output voltage: 400 V, output frequency: 50 Hz, nominal power (apparent): 1,760 kVA, type of cooling: water, Used Cummins Genset c/w Stamford Alternator MODEL : C1760D5E SERIAL : B14K635476 Engine Make/Model: Cummins /QSK60-GS3 Engine Serial Number : 33199906 Alternator Make/Model : Stamford /P1734D1 Alternator serial no : X12b094716 Standby rating: 1760kva Cycle : 50Hz Dkedpfx Asw N Nwiodaek Rated voltage: 400V Power factor: 0.8 Phase-wire: 3-phase/4-wire Hour : 943

Condition: good (used), Electric motor, three-phase motor, fan motor Djdpfx Asrbm Tyodaokk -Manufacturer: ELMO, electric motor fan motor -Type: QSB 71 B/4-2T -Power: 0.33 KW -Speed: 1400 rpm -Shaft: Ø 11 x 25 mm -Protection class: IP20 -Dimensions: 190/165/H125 mm -Weight: 6.6 kg

Condition: new, Year of construction: 2025, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min Dsdpjvk R Arsfx Adaskk - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 KW, 380 V, 50 Hz - Oscillation stroke programmable 10 - 90 mm - CE compliant/dust tested Standard version Kündig Uniq - S Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller - Z04 table extension Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm Dkodpfx Asw Sgnkodaok - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: as good as new (ex-display), Year of construction: 2024, Technical data: Slat carcass press from our showroom; Dksdpjb Eln Dofx Adaek Working range: width from 150 - 2.550mm, height from 150 - 1.400mm; depth from 150 - 700mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 dN(kg) of the lateral pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 dN(kg) of the upper pressing bar Simple operation via 6 separate push buttons, Freely adjustable pressing time preselection with automatic opening, Charging height 300 mm Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2024, The Uniq series is the full-fledged basis of our range and shares all the features that have helped the Kündig edge sanding machine gain its reputation on the market as a robust, versatile precision instrument. Part of its extremely solid construction is the motorized oscillating sanding unit, which offers a maximum oscillation travel of 90mm and the possibility of motorized tilting by up to 45°. All the usual edge processing operations can be carried out at the up to four grinding stations. Edge sanding machine Kündig Uniq front and rear side Ingenious design - the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a whole range of intelligent functions and features. For example, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation travel, sanding belts can be used optimally over their entire width, without the need for laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The sanding unit can also be tilted conveniently by means of a rotary switch and also with the aid of a separate motor. The unit can be tilted between 90° and 45°. Thanks to the sophisticated swivel mechanism Dkodpfxefig Rwj Adajk

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Dkedpoiidm Nofx Adajk Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Edge sanding machine with overhead feed unit What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table with rubberized feed belt and overhead pressure beam. It significantly facilitates the grinding and production of beveled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it is also an aid when machining exceptionally large or small parts. The feed speed is infinitely variable between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the top pressure beam gently convey the material. A second bottom conveyor belt is available as an option. The top pressure rollers can also be replaced by a rubber belt, which helps especially when grinding extremely small parts. Dkedpfx Adehqb Rcjaok The Uniq-S is recommended as an all-rounder that enables all processing - from solid wood to fine veneer edges in high quality. The infinitely variable feed speed allows optimum adaptation to the material. 1st sanding station: "veneer side 2nd sanding station: "solid wood side 3rd sanding station: "Additional table 4th sanding station: "Semi-circular table Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,250 mm, total width: 840 mm, total height: 1,350 mm, * Year of manufacture 2025 (new unit) * Kohler KDI 2504 TM engine * Mecc alternator * Sockets: 1 x 32A, 1 x 16A * 1 x Schuko * Forklift pockets Power 41 kVA Dkjdpsx Tzpmofx Adaek Length 2250 mm Width 840 mm Height 1350 mm Weight 1070 kg

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Full SCM line Dkjdjt T Sq Eopfx Adaek

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: Dkedpfjxqnvrex Adaek RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: ready for operation (used), Heidenhain QSY 116E ID: 339877-5D SN: 42905467L synchronous feed motor, fully refurbished with 12 months warranty, 100% functional, delivery as per photos. Dksdex Ip Itepfx Adaek

Condition: new, Rexroth MAF 130D-0150-FQ-S2-AH0-05-V1 3-phase induction motor, MNR: R911323903, SN: MAF130-04157, unused, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dkedpfxji D Ngye Adajk