Used Plastickoil Concep Qs for sale (869)

Condition: new, Year of construction: 2020, power: 380 kW (516.66 HP), fuel type: diesel, CPL: 8471 Rodpfexgdgljx Affel Approx. weight in kg: 835 kg Dimensions LxWxH: 120x90x115

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Redpfx Asxqnvrsffsl Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 245 h, load capacity: 3,600 kg, lifting height: 4,180 mm, free lift: 1,300 mm, fuel type: electric, mast type: triplex, construction height: 2,390 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 4,683 kg, total length: 2,340 mm, drive type: Elektro, construction width: 1,600 mm, Reach Truck Load center of gravity: 600 Fork width: 140 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Battery voltage: 48V Battery Ah: 620Ah Battery year of manufacture: 2017 Description: In addition to this Dimos model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EQS4542FU. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts weighing 8 tons and over. We would be happy to display your vehicle for consignment sale. Rodsu Dy Afjpfx Affjl Full free lift,

Condition: used, Year of construction: 2025, machine/vehicle number: K24I440352, fuel type: diesel, motor manufacturer: Cummins, Field of application: Construction Transport dimensions (LxWxH): 0x0x0 Redpfx Aowfmnxoffol Please contact PFEIFER GROUP for more information

Condition: refurbished (used), Year of construction: 2016, LAMELLA - CARCASE PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration with: - Sturdy, torsion-resistant frame made of steel in welded and bolted construction - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints - Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam - Electromotorical adjustment of both pressing beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance traveling nuts with grease reservoir - Pressing is carried out electrically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the beams is infinitely electronically adjustable via 2 potentiometers and regulated by a frequency inverter, resulting in absolutely wear-free pressing force control - Pressing force for horizontal pressing beam: min. 500 daN (kg) up to steplessly max. 2200 daN (kg) Pressing force for vertical pressing beam: min. 300 daN (kg) up to steplessly max. 2200 daN (kg) Redpfsxvitiox Affol Pressing and adjustment speed of the beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Very easy operation - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm height min: 150 mm, max: 1400 mm depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German language Completely overhauled by Ganner, 6 months parts warranty Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, functionality: fully functional, mileage: 20 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 5,700 kg, empty load weight: 3,740 kg, fuel tank capacity: 93 l, emission class: euro6, color: black, number of seats: 21, Year of construction: 2025, fuel: diesel, machine/vehicle number: NEW-12, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, low noise, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, soot filter, spoiler, traction control, trailer coupling, MB Sprinter 519 Bluetec - BusConcept Premium - Seating capacity: 19+1+1 - (COC / 2007/46 for 5.5t) ABS, ASR, ESP, EBV, BAS Driver airbag Power steering Central locking Immobilizer Remote control key Active 'Assist' service system Electric windows and heated side mirrors AGM 12V 95 Ah battery + additional AGM battery Additional pulley for second compressor (roof air conditioning) Factory-installed automatic climate control (4.5 kW, independent of roof air conditioning) 93-liter fuel tank Cruise control Additional hot water heating installed at factory Auxiliary battery Adjustable multifunction steering wheel 5-inch color driver display 10.25" MBUX multimedia radio system LED lighting (front and rear) Additional PTC engine heater (positive temperature coefficient) Equipment package (reinforced front and rear suspension, long-life battery, reinforced shock absorbers, reinforced front axle) 205/75 / R16C summer tires (reinforced) Spare wheel Lane departure warning system Active brake assist Hill start assist Crosswind assist JA7 – Blind Spot Assist BA3 – Active Brake Assist RY2 – Tire pressure monitoring Speed limiter (up to 100 km/h) Digital tachograph (legally certified) Suspended, adjustable driver’s seat with armrest First aid kit, two fire extinguishers, warning triangle, repair kit (tool kit), chock SEGE passenger seats with full adjustment (reclining backrests and split side supports) Seats equipped with: armrests, 3-point seat belts, magazine nets, handles, contoured headrests Seats made of artificial leather and perforated synthetic leather, black with colored accents, manufactured by Intap 19+1+1 seating configuration Platforms spanning the entire length of the vehicle Partition wall behind the last row of seats Windows – double-glazed, tinted, FLOCK Curtains on rails – black Four convectors along the entire length of the passenger compartment (approx. 3 m) Convector heating for the passenger compartment, controlled by potentiometer, produced by VEHTEC WEBASTO roof air conditioning 10.5 kW, controllable via Climatronic panel, with individual adjustment for each passenger via X-Line panels White LED lighting on entry step White LED ceiling lighting White LED passenger compartment lighting LED platform lighting – orange Contour LEDs White LED trunk lighting Audio/video kit: additional DVD player LCD monitor, roof-mounted at the co-driver’s seat Wired microphone Speakers in the passenger compartment Reversing camera Rsdsibu U Iopfx Affol Recessed floor Luggage racks on both sides of the passenger compartment Non-slip, waterproof PVC flooring Safety hammers - 3 units Sliding roof with end cap enabling emergency exit Seat belt fixing mark (sticker) Ergonomic handle at vehicle entry Interior trim in eco-leather and soft-touch material – easy to clean Thermal insulation for interior Electric panoramic door – heated Delivery, leasing, or financing available. Available for immediate delivery. Contact us: Auto-Wardenga Irenäus Wardenga – also via WhatsApp

Condition: new, Year of construction: 2020, power: 380 kW (516.66 HP), fuel type: diesel, CPL: 8471 Approx. weight in kg: 835 kg Rodpfx Afsxgd Nmjfjl Dimensions LxWxH: 120x90x115

Year of construction: 1997, condition: used, Year of manufacture 1997 Serial number 9937 Working area X 3100mm Working area Y 600mm Working area Z 850mm Main motor 4 x 5Kw 5-axis machine Number of milling spindles 4 Number of revolutions max 1800 1 table 3000mm x 550mm Rodpfjmhf E Njx Affjl

Condition: used, Year of construction: 2007, clamping force: 420 kN, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, overall weight: 20,000 kg, load hours: 53,000 h, screw conveyor diameter: 70 mm, terms of delivery: EXW (ex Works) Rjdjxr N Urjpfx Affjl delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2025, machine/vehicle number: K24I158166, fuel type: diesel, power: 35 kW (47.59 HP), motor manufacturer: Cummins, Field of application: Construction Rsdpfx Aov Uhqusffsl Empty weight: 842 kg Generator capacity: 38 kVA Transport dimensions (LxWxH): 1.96x0.82x1.28 Please contact PFEIFER GROUP for more information

Condition: new, Year of construction: 2025, machine/vehicle number: 20250214004, fuel type: diesel, motor manufacturer: Cummins QSNT-G3, General information Field of application: Construction Weights Empty weight: 4.670 kg Functional Generator capacity: 440 kVA CE mark: yes Rjdpjw R Na Hjfx Affel Other information Fuel consumption: 52.3 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 650 l Transport dimensions (LxWxH): 4,15x1,48x2,35 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 245 h, load capacity: 3,600 kg, lifting height: 4,830 mm, free lift: 1,840 mm, fuel type: electric, mast type: triplex, construction height: 2,390 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 4,683 kg, total length: 2,340 mm, drive type: Elektro, construction width: 1,600 mm, Reach Truck Load center of gravity: 600 Fork width: 140 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Rodpfxowf Skxs Affjl Condition: Ready for use and fully functional Technical condition: Very good Battery voltage: 48V Battery Ah: 620Ah Battery year of manufacture: 2017 Description: In addition to this Dimos model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EQS4542FU. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts weighing 8 tons and over. We would be happy to display your vehicle for consignment sale. Full free lift,

Year of construction: 2022, condition: used, New: Yes Power: 142 kW (193 HP) Rsdpfxew Ti Ipo Affjl

Condition: good (used), Year of construction: 1997, Müller Martini Graphac Concept – Type MM 1 (24”) Year of manufacture: 1997 _____ TECHNICAL SPECIFICATIONS Description Specification Rsdpfx Ajxv A Dhjffol Format range 16 – 28 1/8″ Cylinder circumference 24″ = 609.6 mm Printing width max. 515 mm (min. 200 mm) Paper width max. 520 mm (20 ½″) Roll diameter max. 1270 mm (50″) Core diameter pneumatic – for 70 mm cores Printing sleeves one 76 mm spindle for MM 1, 2 and 3 – not suitable for Alpha UV drying 6 UV lamps – 2 per printing unit (optional for Alpha) Side register yes – switchable Web direction Main drive 1/3 – straight Web tension control Work 1 + 2 / Work 2 + 3 / Work 3 + 4 Web tension 8 mm Printing units 1 station – central shaft Ø 70 mm Embossing station 1 station for embossing or die-cutting Matrix waste rewind 2 × rewind – double shaft Sheeter 1 sheeter with Ø 70 mm shafts Punching unit 2 double punching stations in fixed layout Die-cutting cylinder 1 magnetic cylinder with micrometric fine adjustment Cross perforation window perforation and suitable for 80 g paper Longitudinal perforation 2 cylinders with 4, 6, 8, 12 divisions – pitch 23.3 mm Punching stations 2 stations – pneumatic punch removal Slitting station 3 × upper, lower and edge trim knives Cross cutting external sheeter – cross knife Folding unit G17 – special fold – min. sheet 210 mm Cross cutting type 6 – 24 teeth rotary knife, fully adjustable Unwinder Motorised – roll Ø max 1270 mm / 70 mm core Rewinder Motorised – roll Ø max 1270 mm / 70 mm core Plate mounting 1 × 70 mm sleeve for Graphac Concept Printing pressure 0.14 mm adjustment Web thickness up to 0.22 mm printing thickness Printing speed up to 250 m/min _____ TOOLING & ACCESSORIES • Print sleeves and magnetic cylinders • Various punching, slitting and perforating tools • UV lamps and cooling system • Complete documentation and technical drawings The 6th printing unit is included – however, the infeed frame for the 6th unit is not available (it was previously removed and is no longer usable).

Condition: new, functionality: fully functional, mileage: 30 km, power: 140 kW (190.35 HP), fuel type: diesel, number of seats: 21, gearing type: automatic, overall weight: 5,700 kg, empty load weight: 4,100 kg, fuel tank capacity: 93 l, emission class: euro6, color: black, wheelbase: 4,325 mm, Year of construction: 2025, Equipment: ABS, additional headlights, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, soot filter, spoiler, summer tires, traction control, trailer coupling, MB Sprinter 519 Bluetec - BusConcept Premium - Seats: 19+1+1 - (COC / 2007/46 for 5.7t) ABS, ASR, ESP, EBV, BAS Driver airbag Power steering Central locking Immobilizer Key with remote control Active service system "Assist" Electric windows and side mirrors (heated) AGM 12V 95 Ah battery + second AGM battery Additional pulley for second compressor (roof air conditioning) Factory-installed automatic air conditioning (4.5 kW, independent of the roof air conditioning) Fuel tank 93 liters Rsdpfxjwm Ev Do Affol Cruise control Additional water heating at the factory Additional battery Multifunction steering wheel with adjustment 5-inch color screen for the driver 10.25 MBux radio multimedia system LED lighting (front and rear) Additional PTC engine heater (positive temperature coefficient) Equipment package (reinforced front and rear suspension, Long-life battery, reinforced shock absorbers, reinforced front axle) Set of summer tires 205/75 / R16C (reinforced) Spare wheel Lane keeping assist Active brake assist Hill start assist Crosswind assist JA7 – Blind spot assist BA3 – Active brake assist RY2 – Tire pressure monitoring Speed limiter (up to 100 km/h) Digital tachograph (legalized) Suspended driver's seat, adjustable, with armrest First aid kit, two fire extinguishers, warning triangle, repair kit (tool kit), wedge SEGE passenger seats with full adjustment (backrest adjustment and two-part side extensions) Seats have: armrests, 3-point seatbelts, newspaper nets, handles, contoured headrests Seats made of artificial leather and perforated artificial leather, black with colored details, produced by Intap 19 + 1 +1 seating configuration Platforms over the entire length of the vehicle Partition/wall behind the last seat row Windows – double, tinted, FLOCK Curtains on rails – black Four convectors running the full length of the passenger compartment (approx. 3 m) Convectors heating the passenger compartment, controlled via potentiometer, product VEHTEC WEBASTO roof air conditioning 10.5 kW, controllable via climatronic panel, with individual distribution to each passenger via X-Line panels White LED at the entry step Ncjbn I Dsibu U Iog H Dst White LED ceiling lighting White LED lighting in the passenger compartment LED platform lighting - orange Contour LEDs Luggage compartment LED lighting white Audio/video kit: an additional DVD player LCD monitor, roof-mounted at the pilot seat height Microphone on cable Speakers in the passenger compartment Rearview camera Recessed hull Luggage racks on both sides of the passenger compartment Non-slip, waterproof PVC floor Safety hammers - 3 units Sliding roof with end cap, allows emergency exit Belt fastening marking (sticker) Ergonomic handle at the vehicle entrance Interior upholstery made of eco-leather and soft material – easy to clean Interior thermal insulation Electric door – panorama – heated Delivery, leasing, or financing possible. Immediately available. Contact us: Irenäus Wardenga also WhatsApp Auto-Wardenga

Condition: used, Year of construction: 2005, TB sprint 304 QSM stitch-fold-trim unit Format open max.: 35 x 50 cm Format open min.: 6.5 x 15.5 cm smallest booklet: 6.5 cm spine length x 4 cm with head-foot trim: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Up to 3100 cycles/h, depending on format and paper Rsdpfxjh I Ahxe Affjl Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorised format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper 4 stiching heads

Condition: new, Year of construction: 2025, machine/vehicle number: E25H033153, fuel type: diesel, motor manufacturer: QSK50-G17, General information Field of application: Construction Weights Empty weight: 12.350 kg Functional Generator capacity: 2.250 kVA CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fuel consumption: 345 Liter per Hour at 75% Load Redpfx Afov E Aylofol Generator: Stamford S7L1D-H41 Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Transport dimensions (LxWxH): 5,864x2,248x2,521 Additional information Please contact Tijmen Pesselse, Arjen van Dijk or Kenny Bongers for more information Warranty: 1 year for continuous use 2 years for standby use

Condition: good (used), Year of construction: 2019, machine/vehicle number: 24451.19, Offer 25359 Technical Data: - Cutting capacity at 90° (round): 250 mm - Cutting capacity at 90° (flat): 275 x 180 mm Redpfxexup Rfs Affol - Miter adjustment to the left - Cutting capacity at 45° (round): 200 mm - Cutting capacity at 45° (flat): 190 x 180 mm - Cutting capacity at 30° (flat): 130 x 110 mm - Material support height: approx. 920 mm - Saw band dimensions: 3100 x 27 x 0.9 mm - Infinitely variable cutting speed: 15 to 100 m/min - Hydraulic lifting and lowering of the saw frame - Upper travel limit of the saw frame - Infinitely adjustable cutting pressure: 0 – 10 m/min - Hydraulic material vice - Micro-spray cooling system - Total drive power: 400 V / 2.2 kW - Required space approx.: W 2400 x H 1600 x D 1800 mm - Weight approx.: 1300 kg - 3 x Roller conveyor, each 1500 mm

Year of construction: 2017, condition: used, New: Yes Rsdpfx Aexu Dfwsffsl Power: 133 kW (181 HP)

Condition: good (used), Year of construction: 2002, Müller Martini Graphac Concept UV, 5-color press, Year of manufacture: 2002 Type MM 2 (24”) In very good condition and available immediately. This press has been meticulously maintained and comes equipped with numerous valuable options and components, making it ideal for high-quality UV printing and finishing tasks. Technical specifications: Format range: 16–28 1/8" Cylinder circumference: 24” = 609.6 mm Maximum printing width: 508 mm (minimum 200 mm) Maximum paper width: 520 mm (20 ½”) Maximum roll diameter: 1270 mm (50”) Core diameter: pneumatic – for 70 mm cores (option for 76 mm) Printing sleeves: only one 76 mm spindle for MM 1, 2, 3 (not applicable for Alpha) UV drying: up to 3 UV lamps, 2–3 per unit (air and water cooled) Side register: Yes – switchable Web direction: Main drive 1/3 – straight Web tension control: Work 1+2, Work 2+3 Web tension: 8 mm Printing units: 1 station – central shaft Ø 70 mm Embossing station: 1 station for embossing or die-cutting Matrix waste removal: 2× rewind – double shaft Sheeter: 1 sheeter with Ø 70 mm shafts Punching unit: 2 double punching stations (fixed layout) Die-cutting cylinder: 1 magnetic cylinder with micrometric fine adjustment Cross perforation: window perforation and suitable for 80 g paper Longitudinal perforation: 2 cylinders with 4, 6, 8, 12 divisions – perforation pitch 23.3 mm Punching stations: 2 stations – pneumatic punch removal Slitting: 3× upper, lower and edge trim knives Cross cutting (external sheeter): cross knife Folding: G17 special folding, minimum sheet 210 mm Cross cutting type: 6–24 teeth rotary knife, fully adjustable Rjdpjxu I Rwofx Affol Unwinder: motorised, roll Ø max 1270 mm, 70/76 mm cores Rewinder: motorised, roll Ø max 1270 mm, 70/76 mm cores Plate mounting: 1 piece 70 mm sleeve, 1 piece 76 mm sleeve for Graphac Printing pressure: 0.14 mm adjustment Web thickness: up to 0.22 mm printing thickness Printing speed: up to 250 m/min

Condition: excellent (used), Year of construction: 2014, operating hours: 943 h, functionality: fully functional, machine/vehicle number: B14K635476, fuel type: diesel, output voltage: 400 V, output frequency: 50 Hz, nominal power (apparent): 1,760 kVA, type of cooling: water, Used Cummins Genset c/w Stamford Alternator Rsdpfx Afjw N Nwiefel MODEL : C1760D5E SERIAL : B14K635476 Engine Make/Model: Cummins /QSK60-GS3 Engine Serial Number : 33199906 Alternator Make/Model : Stamford /P1734D1 Alternator serial no : X12b094716 Standby rating: 1760kva Cycle : 50Hz Rated voltage: 400V Power factor: 0.8 Phase-wire: 3-phase/4-wire Hour : 943

Condition: new, Year of construction: 2025, machine/vehicle number: 20221025089, fuel type: diesel, motor manufacturer: Cummins QSZ13-G10, General information Field of application: Construction Rsdpfx Afsiwc Dbsfol Weights Empty weight: 5.210 kg Functional Generator capacity: 600 kVA Other information Fuel consumption: 80 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 800 l Transport dimensions (LxWxH): 4,5x1,6x2,5 Additional information Please contact Arjen van Dijk, Tijmen Pesselse or Kenny Bongers for more information

Condition: new, Year of construction: 2025, machine/vehicle number: 20250214003, fuel type: diesel, motor manufacturer: Cummins QSZ13-G3, General information Field of application: Construction Weights Empty weight: 4.950 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Fuel consumption: 74.2 Liter/Hour at 75% Load Rsdpfx Asxfpr Rjffol Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Transport dimensions (LxWxH): 4,25x1,6x2,45 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Cummins QSK60-G4, General information Field of application: Construction Weights Empty weight: 16.160 kg Functional Generator capacity: 2.250 kVA CE mark: yes Other information Fuel consumption: 291 Liter per Hour at 75% Load Generator: Stamford PI734G Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Transport dimensions (LxWxH): 6,175x2,286x2,537 Redpjxwhubefx Affol Additional information Please contact Kenny Bongers, Tijmen Pesselse, DPX Power or Arjen van Dijk for more information Warranty: 1 year for continuous use 2 years for standby use

Condition: new, Year of construction: 2025, machine/vehicle number: 20241221018, fuel type: diesel, motor manufacturer: Cummins QSK19-G11, General information Field of application: Construction Weights Redpfx Afexb Nx Ajfol Empty weight: 7.200 kg Functional Generator capacity: 800 kVA CE mark: yes Other information Fuel consumption: 115 Liter/Hour at 75% Load Generator: Leroy Somer TAL-A49B Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1065 l Transport dimensions (LxWxH): 5x1,95x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information