Used screw compressors for sale (840)

Condition: ready for operation (used), Year of construction: 2023, power: 7.5 kW (10.20 HP), pressure (min.): 6 bar, pressure (max.): 15 bar, noise level: 62 dB, compressed air tank capacity: 270 l, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Operating overpressure: 15 bar Delivery rate (at 15 bar): 400 - 790 l/min Delivery rate (at 13 bar): 430 - 860 l/min Delivery rate (at 10 bar): 330 - 1,090 l/min Delivery rate (at 8 bar): 330 - 1,240 l/min Delivery rate (at 6 bar): 330 - 1,370 l/min Volumetric flow rate: 90 m³/h Air connection: 1/2" inches MACHINE DETAILS Compressed air tank: 270 l / 11 bar, upright, galvanized Residual oil content at 20°C max.: 0.01 mg/m³ Differential pressure wet, saturated: 110 mbar Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400 ~3 / 50 V/Hz Sound level: 62 dB(A) Dimensions & Weight Dimensions (L x W x H): 1,079 x 553 x 1,014 mm Machine weight: 273 kg EQUIPMENT Refrigerant dryer Frequency control Prefilter grid Electronic control RENNERtronic Touch Level-controlled condensate drain KN5 230VAC, shortened version Schneider mounting kit ABZ-Eco 3100 Uni condensate drain Ecomat Schneider condensate collection line, 3 connections Pre-filter LPPN 73 FF5 Particle filtration 5 microns Sub-micron filter LPPN 73 SMA Particle filtration 0.01 microns Wall mount incl. connection kit for 2 filters LPP 23 - LPP73 Nedszb Idrepfx Ad Sjwh 2x connection hose VSL 1/2"-1300 mm Oil-water separator KON-P 5 Note: Accessories are without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Mahle Screw Compressor, Screw Compressor, Compressor; Mahle MSK D37, 37 kW Screw Compressor, Used Machine Nwedpfswqbzdjx Ad Sjh Manufacturer: Mahle Type: MSK D37 Year: 1995 Dimensions: 1480 x 845 x 1010 mm Operating Hours: 48,600 Maximum Operating Pressure: 10 Bar Power: 37 kW Delivery Quantity: 4900 l/min; 4.9 m3/h

Condition: good (used), Year of construction: 1988, Manufacturer: Atlas Copco Type: GA 230 Max. final pressure: 13 bar Free air delivery: 50 l/sec Nsdpfxehyglas Ad Sowh Motor power: 30 kW Max. speed: 1500 r/min

Condition: used, Year of construction: 2021, machine/vehicle number: ITJ514296, AIR ENERGIE CONTROL 3+ controller, maximum pressure 13 bar Nwjdpfx Adsy Sqiye Seh

Condition: used, Year of construction: 2021, machine/vehicle number: ITJ719403, AIR ENERGIE CONTROL 3+ controller, maximum pressure 13 bar Nedpsy Sqkdofx Ad Sswh

Condition: excellent (used), Year of construction: 2022, operating hours: 8,244 h, functionality: fully functional, overall weight: 445 kg, total length: 980 mm, total width: 1,975 mm, total height: 1,710 mm, power: 5.5 kW (7.48 HP), fuel type: electric, operating pressure: 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 45 °C, noise level: 68 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Available for sale from our warehouse location: Albert-Proeller-Straße 9a, 86675 Buchdorf Service will be performed professionally on June 16, 2026. Manufacturer: BOGE Model: C 7 DR Year of manufacture: 2022 Type: Screw compressor, sound-insulated Configuration: • C7 = 5.5 kW screw compressor • R = mounted on a compressed air tank • D = integrated refrigerant dryer Compressor type: Oil-injected screw compressor Nwsdpfx Aozf Ihqjd Soh Rated power: 5.5 kW Maximum pressure: 10 bar Effective delivery rate: 0.736 m³/min at 10 bar Voltage: 400 V / 50 Hz Drive: Direct drive with elastic coupling Control: Electronic BASIC control Dimensions (L × W × H): approx. 1975 × 980 × 1710 mm Weight: 445 kg (with tank & dryer) Tank volume: 500 l (C7R standard) Type: freestanding, under-mounted

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: ITJ291580, power: 15 kW (20.39 HP), Equipment: compressed air system, compressor, type plate available, The Chicago Pneumatic CPVSD20 UL compressor is a 15 kW lubricated industrial unit, ideal for various applications requiring a working pressure of up to 10 bar. Although it is a used unit, this device is designed to deliver reliable and long-lasting performance in a demanding industrial environment. Chicago Pneumatic compressors are known for their energy efficiency and their ability to adapt to fluctuating compressed air needs, thanks to their advanced control system. The CPVSD20 UL model, in particular, offers an excellent balance between power and economy, making it a wise choice for users seeking to combine performance and reduced operating costs. Nodpfxezfzagj Ad Sjwh By choosing this compressor, you benefit from a robust and proven machine, ready to be integrated into your production line or used in specific applications requiring constant pressure. It is an investment that goes hand in hand with reliability and quality, thereby ensuring uninterrupted operation for your industrial processes.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 1464, Offer 26166 - Screw compressor Manufacturer: KAESER, Type: SK 22 Machine No.: 1464, Year of manufacture: 2015 - SIGMA Control system - Operating hours: approx. 15,933 h - Load hours: approx. 7,654 h - Operating pressure: 11 bar - Delivery rate: 1.67 m³/min Nwjdpszg Uh Tefx Ad Soh - Drive: 400 V / 11 kW - Space requirement: approx. W 780 x H 1030 x D 850 mm - Weight: approx. 300 kg - Compressed air tank Manufacturer: OKS, Type: 500L Machine No.: 462811, Year of manufacture: 1998 - Tank volume: 500 L - Compressed air dryer Manufacturer: JÄGER, Type: ERD 150 Machine No.: 1268, Year of manufacture: 2011 - Refrigerant: R134 A - Cooling air flow: 150 m³/h - Oil-water separator

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale is a high-quality Renner RS Pro 22 screw compressor, including a refrigerant dryer. The system is of German quality manufacture and is ideally suited for craft businesses, carpentry shops, metal construction, industry, and workshops with higher compressed air requirements. The additional refrigerant dryer ensures dry and clean compressed air, which extends the service life of machines and pneumatic tools. Technical data: Manufacturer: Renner GmbH Model: RS Pro 22 Year of manufacture: 2019 Type: 3440 Motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Phases: 3~ Delivery rate: 3,440 l/min Nedpfx Aezfi Dtjd Sjwh Max. operating pressure: 10 bar Made in Germany CE version Equipment: Screw compressor Integrated refrigerant dryer Soundproof enclosure Industrial version Three-phase connection 400 V Maintenance-friendly design High air output Suitable for continuous operation Application areas: Carpentry Joinery Metal construction Automotive workshops Industry Craft businesses Scope of delivery: Renner RS Pro 22 screw compressor Refrigerant dryer Accessories as per scope of delivery Condition: Used - but with few operating hours - see photo Oil change performed New drive belts Functional Signs of wear and tear consistent with age and use Ready for immediate use The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: like new (used), Year of construction: 2022, operating hours: 68 h, functionality: fully functional, machine/vehicle number: 4152055765, overall weight: 271 kg, power: 5.5 kW (7.48 HP), fuel type: electric, fuel tank capacity: 500 l, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (max.): 46 °C, noise level: 63 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, APS 7.5 Combi Dry Screw Compressor 10 Bar 500 L tank Integrated dryer Low noise level 63 dB Nsdpfey Sh Ersx Ad Sowh Three-phase 400V

Condition: excellent (used), Year of construction: 2018, S016882 PROD. KAESER TYPE CSD125 S/N 1380 YEAR 2018 POWER (kW) 75 CAPACITY (m3/min) 12.2 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 18299/20941 INVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION G2 NEW/USED USED Nwedpfxezgwb Ns Ad Sjh

Condition: used, Year of construction: 1987, Compressors: . operating pressure 10 bar output 30 kW Operating hours Compressor 1 ca. 18.214 h Load hours compressor 1 ca. 5.349 h Operating hours Compressor 2 ca. 7.272 h Load hours compressor 2 ca. 5.022 h operating pressure 10 bar content 3.000 L Complete compressor set consisting of: 2x compressors: - Manufacturer: KAESER - Type: BS 44 - Year of manufacture: 1987 1x refrigerated dryer - Manufacturer: KAESER 1x tank: - Manufacturer: Lohenner & Co.K.G. - Year of manufacture: 1987 Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Nwsdpfx Adjyg Rags Ssh Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as Nwsdjvyutgspfx Ad Sjh prior sale!

Condition: used, Year of construction: 2002, power capacity 4 kW feed pressure 10 bar liter capacity 500 l total power requirement 4 kW weight of the machine ca. 110 Kg Nwjdpfx Aozd Haced Seh dimensions of the machine ca. 2,5 x 1 x 2 m, gesamt Kaeser compressed air compressor, a reliable unit with a 500-litre tank, compressor and refrigeration dryer. Technical specifications: Manufacturer: Kaeser Year of manufacture: 2002 Power: 4 kW Connection: 16 A Tank capacity: 500 litres The compressor is solidly built, designed for continuous operation and reliably supplies compressed air for various applications. Viewing available at any time Accessories available Shipping via a haulage contractor possible Translated with (free version)

Condition: used, Year of construction: 2013, functionality: fully functional, power: 11 kW (14.96 HP), pressure (max.): 10 bar, ISC Recycle offers you a screw compressor from the German brand ALMIG, renowned for its robustness and industrial reliability. Nwsdpfxszgtr Rs Ad Ssh Brand: ALMIG Model: BELT 11-10 Condition: Used Year of manufacture: 2013 Power: 11 kW Maximum pressure: 10 bar Air flow rate/volume: 1.70 m³/min Engine speed: 3,000 rpm Do not hesitate to contact us for more information.

Condition: used, Year of construction: 2024, operating hours: 3,900 h, functionality: fully functional, power: 11 kW (14.96 HP), ISC Recycle offers you a high-quality compressor in excellent condition, ready for use. Model: RENNER RSF-PRO-2-11 Condition: Used (Very recent) Year of manufacture: 2024 Power: 11 kW Maximum operating pressure: 10 bar Capacity/Flow rate: 2,040 ltr/min at 6.0 bar Nwsdezgr Nzopfx Ad Ssh Power supply: 400V / 50Hz / 3-phase Do not hesitate to contact us for more information!

Condition: used, Year of construction: 2014, operating hours: 34,146 h, Atlas Copco GA15+ Screw Compressor For sale is a screw compressor manufactured by Atlas Copco, model GA15+. This compressor is ideal for industrial and commercial applications and is known for its reliability and durability. Technical specifications: Nwodpfeybbchex Ad Sjh Manufacturer: Atlas Copco Model: GA15+ Type: Screw compressor Year of manufacture: 2014 Operating hours: 34,162 h Note: All information is provided to the best of our knowledge, but without warranty. If you are interested or have any further questions, please do not hesitate to contact me.

Condition: excellent (used), Year of construction: 2015, RENNER RSF2-45 screw compressor, equipped with a frequency converter and heat exchanger, recently serviced. Technical data: capacity: 6.83 m3/min (6830/min); engine power: 55 kW; pressure: 10 bar; Year: 2015 operating hours: 9691 h net price: 19200 gross price: 23616 Compressor in fully working condition. Nedpezgdf Uofx Ad Sewh Service support provided.

Condition: excellent (used), Year of construction: 2008, KAESER CSD102 screw compressor, serviced unit with heat exchanger. Technical data: capacity: 10.0 m3/min; engine power: 55 kW; pressure: 8 bar Operating hours: 14124 h Nwjdpfxszgdfze Ad Seh year: 2008 net price: 22,500 PLN gross price: 27,675 PLN Compressor in perfect working order. We provide service support. Below is a link to a video showing the machine in operation.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, BOGE SLF75-3 screw compressor with inverter, serviced Technical data: capacity: 2.20-9.60 m3/min 55 kW motor; max. pressure: 8 bar; operating hours: 12335 h; year: 2017 net price: 36900 PLN Nwedpfxezgdddj Ad Soh gross price: 45387 PLN The compressor is in fully working condition; we provide service support.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CREEMERS RME90IVR screw compressor, equipped with a frequency converter and heat exchanger, recently serviced. Technical specifications: Capacity: 15.73 m3/min; Nwjdpfx Adozgdars Sjh Engine: 90 kW; Pressure: 10 bar; Operating hours: 11,280 h; Year: 2015 The compressor is in full working order. Net price: 42,500 PLN Gross price: 52,275 PLN

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, KAESER PREMIUM CAR 450/30 reciprocating compressor with a 30L tank Technical data: Nwsdpfx Adozgc Twe Seh power supply - 400 V motor power 2.20 kW; effective output: 274 l/min; maximum pressure 10 bar; Year: 2022 compressor in fully working condition; net price: 3200 PLN gross price: 3936 PLN

Condition: used, Year of construction: 1993, machine/vehicle number: 36100011, total length: 1,950 mm, total width: 800 mm, total height: 1,500 mm, space requirement length: 2,150 mm, space requirement width: 800 mm, space requirement height: 1,670 mm, power: 22 kW (29.91 HP), fuel type: electric, volume flow: 210 m³/h, operating pressure: 8 bar, pressure (min.): 8 bar, pressure (max.): 8 bar, rotational speed (max.): 4,400 rpm, rotational speed (min.): 4,400 rpm, Equipment: documentation/manual, type plate available, Franz compressed air compressor For sale due to restructuring Fully functional until recently Njdpfezgchhsx Ad Sewh Inspection possible Loading onto a truck is possible

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,848 kg, Equipment: type plate available, Technical details: Voltage: 400V Phase: 3 Frequency: 50 Hz Volume flow: 13.98 m³/min Speed: 4050 rpm Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: air Stage pressure: 13 bar g Full load current: 159 A The CompAir screw compressor L75SR-13A is a reliable and powerful solution for compressed air supply in industrial applications. This model impresses with its robust design, high efficiency, and easy operation. It is specifically designed for continuous use and provides stable compressed air performance that meets the requirements of various businesses. Thanks to its compact design, the L75SR-13A can be flexibly integrated into a wide variety of systems and ensures smooth operation with minimal maintenance effort. Nodjwrrgmspfx Ad Sewh

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: A34904774, overall weight: 1,765 kg, Equipment: type plate available, Technical details: Voltage: 400 V Nwodpfxswtfk Uo Ad Sjh Phase: 3 Frequency: 50 Hz Air flow rate: 12.44 m3/min Speed: 3000 min-1 Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: air Stage pressure: 10 bar g Full load current: 169 A The CompAir L75-10 A screw compressor is an efficient and reliable solution for compressed air supply in industrial applications. Thanks to its modern technology, it operates energy-efficiently and ensures stable compressed air performance. The compressor is equipped with integrated heat recovery, allowing the useful utilization of the waste heat and further reducing energy consumption.