Used Plastickoil Concep Qs for sale (180)

Condition: used, Empty weight: 4.200 kg Dimensions (LxBxH): 190 x 390 x 180 cm - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 90-58-07 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 50 - └ Spindle 2: - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 50 - └ Spindle 3: - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - └ Spindle 4: - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - Max. planing width [mm]: 240 - Max. planing height [mm]: 85 - Feed table length [mm]: 1440 - Feed motor [kW]: 5.5 - Diameter extraction nozzle [mm]: 150 - Transport dimensions: 1900mm x 3900mm x 1800mm (l x w x h) - Transport weight [kg]: 4200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iodpfx Adownh U Eo Ujan Yorick Diebels

Condition: good (used), Electric motor, three-phase motor, fan motor -Manufacturer: ELMO, electric motor fan motor -Type: QSB 71 B/4-2T Isdpferbm Tyex Ad Usan -Power: 0.33 KW -Speed: 1400 rpm -Shaft: Ø 11 x 25 mm -Protection class: IP20 -Dimensions: 190/165/H125 mm -Weight: 6.6 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,250 mm, total width: 840 mm, total height: 1,350 mm, * Year of manufacture 2025 (new unit) * Kohler KDI 2504 TM engine * Mecc alternator * Sockets: 1 x 32A, 1 x 16A * 1 x Schuko * Forklift pockets Power 41 kVA Length 2250 mm Width 840 mm Height 1350 mm Iasdex Tzpmjpfx Ad Uen Weight 1070 kg

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Full SCM line Iodpst T Sq Eefx Ad Uean

Condition: new, Year of construction: 2025, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 KW, 380 V, 50 Hz - Oscillation stroke programmable 10 - 90 mm - CE compliant/dust tested Standard version Kündig Uniq - S Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller - Z04 table extension Location: from stock 54634 Bitburg Iaodpjvk R Arjfx Ad Usn - immediately available -

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Isdpfx Ajw Sgnkjd Ujan Available: at short notice

Condition: new, Year of construction: 2024, The Uniq series is the full-fledged basis of our range and shares all the features that have helped the Kündig edge sanding machine gain its reputation on the market as a robust, versatile precision instrument. Part of its extremely solid construction is the motorized oscillating sanding unit, which offers a maximum oscillation travel of 90mm and the possibility of motorized tilting by up to 45°. All the usual edge processing operations can be carried out at the up to four grinding stations. Edge sanding machine Kündig Uniq front and rear side Isdpfx Aofig Rwed Ujan Ingenious design - the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a whole range of intelligent functions and features. For example, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation travel, sanding belts can be used optimally over their entire width, without the need for laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The sanding unit can also be tilted conveniently by means of a rotary switch and also with the aid of a separate motor. The unit can be tilted between 90° and 45°. Thanks to the sophisticated swivel mechanism

Condition: as good as new (ex-display), Year of construction: 2024, Technical data: Slat carcass press from our showroom; Working range: width from 150 - 2.550mm, height from 150 - 1.400mm; depth from 150 - 700mm; Ijdpob Eln Dsfx Ad Uoan Variable pressing force adjustment 300/700/1100/1400/1800/2200 dN(kg) of the lateral pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 dN(kg) of the upper pressing bar Simple operation via 6 separate push buttons, Freely adjustable pressing time preselection with automatic opening, Charging height 300 mm Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements Iajdpfxjiidm Ne Ad Ujn - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Edge sanding machine with overhead feed unit What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table with rubberized feed belt and overhead pressure beam. It significantly facilitates the grinding and production of beveled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it is also an aid when machining exceptionally large or small parts. The feed speed is infinitely variable between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the top pressure beam gently convey the material. A second bottom conveyor belt is available as an option. The top pressure rollers can also be replaced by a rubber belt, which helps especially when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all processing - from solid wood to fine veneer edges in high quality. The infinitely variable feed speed allows optimum adaptation to the material. 1st sanding station: "veneer side 2nd sanding station: "solid wood side 3rd sanding station: "Additional table 4th sanding station: "Semi-circular table Location: Ex stock 54634 Bitburg - immediately available - Iedpjhqb Rcofx Ad Uoan

Condition: used, Used agitator with scales Item number: 10824 Last use: Pharma Type: Upright on 4 castors Material (wetted parts): 1.4301 / AISI 304 Iasdpfxsut U Tpj Ad Ujn Container dimensions: Total width: 500mm Total length: 1500mm Total height: 1560mm Facilities: Type plate: yes Agitator: beam shaft length: 355mm Stirrer: Ø180mm Scale

Condition: excellent (used), Year of construction: 2011, operating hours: 103 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, power: 2,000 kW (2,719.24 HP), fuel type: diesel, nominal power: 1,800 kW (2,447.32 HP), rotational speed (min.): 1,500 rpm, overall weight: 15,500 kg, type of cooling: air, color: grey, output voltage: 400 V, nominal power (apparent): 2,250 kVA, output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Stamford / CUMMINS, DUAL SWITCHING 50/60HZ 4 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F Iodpox R Szuofx Ad Uean ✔️ year of manufacture 2010 Runtime hours 100> 75-91 hrs * engine Cummins QSK60-G9 Contact - Joshua Alexander -Iron Flag Global Limited The Demo project is over so we can now sell then Assets!!! Iron Flag Power Systems (US) / Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment. for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE FOUR UNITS IN TOTAL -PLUS TWO CUMMINS CONTROL SYSTEM AND ADDITIONALS INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime 4 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz 60hz - DUAL VOLTAGE ALTERNATOR - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets. Contact Joshua Alexander Iron Flag Global Limited

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm Iodpjxqnvrjfx Ad Ujan (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: ready for operation (used), Heidenhain QSY 116E ID: 339877-5D SN: 42905467L synchronous feed motor, fully refurbished with 12 months warranty, 100% functional, delivery as per photos. Iaodpfxsx Ip Ite Ad Usn

Condition: new, functionality: fully functional, mileage: 20 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 5,700 kg, empty load weight: 3,740 kg, fuel tank capacity: 93 l, emission class: euro6, color: black, number of seats: 21, Year of construction: 2025, fuel: diesel, machine/vehicle number: NEW-12, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, low noise, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, sliding door, soot filter, spoiler, traction control, trailer coupling, MB Sprinter 519 Bluetec - BusConcept Premium - Seating capacity: 19+1+1 - (COC / 2007/46 for 5.5t) ABS, ASR, ESP, EBV, BAS Driver airbag Power steering Central locking Immobilizer Remote control key Active 'Assist' service system Electric windows and heated side mirrors AGM 12V 95 Ah battery + additional AGM battery Additional pulley for second compressor (roof air conditioning) Factory-installed automatic climate control (4.5 kW, independent of roof air conditioning) 93-liter fuel tank Cruise control Additional hot water heating installed at factory Auxiliary battery Adjustable multifunction steering wheel 5-inch color driver display 10.25" MBUX multimedia radio system LED lighting (front and rear) Additional PTC engine heater (positive temperature coefficient) Equipment package (reinforced front and rear suspension, long-life battery, reinforced shock absorbers, reinforced front axle) 205/75 / R16C summer tires (reinforced) Spare wheel Lane departure warning system Active brake assist Hill start assist Crosswind assist JA7 – Blind Spot Assist BA3 – Active Brake Assist RY2 – Tire pressure monitoring Speed limiter (up to 100 km/h) Digital tachograph (legally certified) Suspended, adjustable driver’s seat with armrest First aid kit, two fire extinguishers, warning triangle, repair kit (tool kit), chock SEGE passenger seats with full adjustment (reclining backrests and split side supports) Seats equipped with: armrests, 3-point seat belts, magazine nets, handles, contoured headrests Seats made of artificial leather and perforated synthetic leather, black with colored accents, manufactured by Intap 19+1+1 seating configuration Platforms spanning the entire length of the vehicle Partition wall behind the last row of seats Windows – double-glazed, tinted, FLOCK Curtains on rails – black Four convectors along the entire length of the passenger compartment (approx. 3 m) Convector heating for the passenger compartment, controlled by potentiometer, produced by VEHTEC WEBASTO roof air conditioning 10.5 kW, controllable via Climatronic panel, with individual adjustment for each passenger via X-Line panels White LED lighting on entry step White LED ceiling lighting White LED passenger compartment lighting LED platform lighting – orange Contour LEDs White LED trunk lighting Audio/video kit: additional DVD player LCD monitor, roof-mounted at the co-driver’s seat Wired microphone Speakers in the passenger compartment Reversing camera Recessed floor Luggage racks on both sides of the passenger compartment Non-slip, waterproof PVC flooring Safety hammers - 3 units Sliding roof with end cap enabling emergency exit Seat belt fixing mark (sticker) Ergonomic handle at vehicle entry Interior trim in eco-leather and soft-touch material – easy to clean Thermal insulation for interior Electric panoramic door – heated Delivery, leasing, or financing available. Available for immediate delivery. Contact us: Auto-Wardenga Irenäus Wardenga – also via WhatsApp Iaedpfx Aeibu U Isd Uon

Condition: like new (used), Year of construction: 2005, operating hours: 1,500 h, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 510 mm, turning diameter: 430 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, rotational speed (max.): 6,300 rpm, type of input current: three-phase, overall weight: 2,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in very good condition and immediately ready for use. The machine comes complete with various tools and driven tools, both axial and radial. Software: Sinumerik 810D/840D Turning. Full documentation is available and included. Iaedpfxjx Rqd Is Ad Uon

Condition: ready for operation (used), Complete rolvormlijn uitgerust met gereedschap voor de productie van een nieuw type industriële goot voor gegalvaniseerd staal/roestvrij staal 1 - Afrolinrichting 2 ton maximale breedte: 600 mm binnen- en buitendiameter van de spoel: 508 - 920 mm hydraulische uitzetting van de klauw: 460 640 mm 4 kW 2 - Rolvormlijn Type H 18 stations maximale breedte: 600 mm maximale dop: 0,8 mm asdiameter: 60 mm Iodpfx Adjx Impus Usan maximale hart-hart as afstand: 300 mm Siemens Simatic touchscreen bediening + ethernet aansluiting 7,5 kW 3 - Hydraulische schaar kracht: 5 ton Klik hier om de tweede Tecnoma-lijn te zien voor de productie van installatiehaken.

Condition: new, Rexroth MAF 130D-0150-FQ-S2-AH0-05-V1 3-phase induction motor, MNR: R911323903, SN: MAF130-04157, unused, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iedpfx Asi D Ngysd Ujan

Condition: used, This listing is for the Quattroflow QS15SU Fluid systems pump The unit is in full working condition and is ready for immediate use The Quattroflow 15SU is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, Iaodpfx Adjxl Er Ho Uon food or cosmetic research centres or plants. Examples: Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) Solutions of polymers or suspensions (silicon, latex, chromatography media) Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) colloidal solutions Suspensions of viruses or phage Dairy products Gelatine Supplements and ingredients for cosmetic and food

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Iedpfx Adjwz Ic As Uoan Edges thickness in stips / lippings (min/max) max mm 1,0 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt glue) 04.1570 Pressure zone Edge coils supporting unit (No. of reels) 2 Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) 30 m/min (0°-25°) Rough Trimming unit 08.0555 (1 x Kw 0,66) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Milling grooving unit: 75.30 (2 x Kw 4,4)

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Iodpfsd Rcigex Ad Usan Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 Free space (to add a Grooving Milling Unit)

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms Iajdpfxsfi Tg He Ad Uon No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.376 (Kw 4,5 x 2) Lamps to heat the workpieces side Iodpfx Aoidqphed Uean Glueing Unit (Hot Melt Glue + Quick Melt system) 283.1513 + 283.201 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.42 (Kw 0,66 x 2) 0°-25° - max 30 m/min, Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-30° Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) 08.348 (KW 0,66 x 2) 4 profiles Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612- 2 (Kw 0,25 x 2) Milling grooving unit 08.183 (Kw 3 x 1)

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer Safety and sound-proof enclosure - OPTIONAL No. 4+4 Vertical columns to support the working units Iedpfx Adoifz H Ne Uoan Min. useful working width (mm) 150 (ca.) Max. useful working width (mm) 3100 (ca.) Max. useful working thickness (mm) 180 (ca.) Distance between center-axes of the disappearing dogs (mm) 500 (ca.) Adjustable (min/max) feeding speed (m/min) 8-40 (ca.) No. 8 Working groups (for each machine's side): 1 Jumping Scoring Unit 1 Hogging Unit 1 Jumping Milling Unit 1 Milling-Shaping unit 1 Corners Rounding unit (contour trimming) with 2 vertical motors 1 Belt sanding unit (with abrasive disc) 1 Belt sanding units (with abrasive papers)

Year of construction: 2006, condition: ready for operation (used), 2 x Müller Martini Warenkkeber 423 with Robatech Hotmelt Concept B 5/2, year of manufacture 2006 Iodpfx Asxfwvqod Uoan for Müller Martini Tempo saddle stitcher. Good condition