Single Edgebanders

HOMAG EDGETEQ S-500

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm Ibedpfx Afjztpw Neuea - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min Isdpfxex Aqdce Afuoba No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Isdpsy In A Nefx Afusba Operating Units: 8 nr

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Isdpfjy In Dgsx Afuoba Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Ibodpfex A E Tfsx Afuoa Total number of tool changer positions: 15

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Isdpszku Rpsfx Afusba Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: used, Year of construction: 2022, Edge bander for narrow surfaces + XES200 station Manufacturer: HOMAG Type: EDGETEQ S-500 KAL375 AT Year: 2022 + XES200 station designed for servicing a PUR adhesive system using airTec technology Control: HOMAG powerControl PC23 with powerTouch screen Equipment: pre-milling unit, glue application unit, airTec technology, Ibedpfx Afezkmqzeuoa trimming units, milling units, rounding units, sanding units, polishing units. Additional equipment: HOMAG XES 200 service station.

Condition: used, machine/vehicle number: 008111, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Ibedpfx Afoy Dq Iajuja Maximum panel thickness: 60 mm Operating Units: 9 nr