Used Pet Blowing Machine for sale (65,241)

Condition: used, Year of construction: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Preforms are poured from a container into the feed hopper via a tilting device. From there, the preforms are fed out via an ascending belt with electronically controlled speed and are transported to the blow molding machine in a uniform orientation via a chute and loading star wheel. The shape and size of the preforms are checked and defective preforms are ejected before they are fed to the heating boxes via a mechanical star wheel. In the heating boxes, the preforms are preheated with infrared lamps. They are continuously rotated to ensure symmetrical heat distribution. Fans prevent overheating on the outside. Finally, the preform temperatures are checked using an optical pyrometer. Grippers feed the preforms to the blow wheel and remove them from it. The blow molding unit works with “crocodile molds,” in which expansion along the longitudinal axis is supported by a stretching rod. The preforms are then blown into PET bottles. The stretch-blown bottles are removed from the cavities by grippers and conveyed to the ejector. Additional title: rotational molding machine Capacity: 18000 bo/h Number of cavities: 8 pcs. Number of bottles to be ejected per stop: 202 pcs. Blow pressure: 30 bar Power: 58 kW Voltage: 400 V Frequency: 50 Hz Water: 4 bar Klsdpsxyktlefx Ap Asw Compressed air: 360 Nm3/h at 7 bar Weight: 16700 kg Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Features: Preform feed hopper with tilting device for containers, inclined belt conveyor for preforms, preform inspection, heating boxes, blow wheel; bottle ejector; visualization on screen

Condition: used, Year of construction: 2004, Used PET Blower Siapi 2004 type EASP 20 – Italy Kledsvgutaepfx Ap Aew This is a complete blow molding machine which was not in use for the last 3 years. Blower speed: 2.500 bph for 2 L bottles The machine has 2 cavities, for neck sizes 28-38 mm. This Siapi Blower can be tested with a dry run. Weight: blower 5.000 kg, elevator 250 kg, positioner 250 kg All the necessary technical documentation for this machine is available. Required installed power: 120 kW Is available this compressor unit with additional offer: Compressor: Tempo Tehnika 350, 2004 Specs: 1100 rpm, 75 kW, 42 bar Dehumidifier: Bode du 37 type 309 – 2006 Compressed air tank: 1,000 L Compressor cooler: MTA rwd 150 – 2004 Machine cooler: Euri chiller gc – 2004 The compressor is included in this PET blow molding machine, or it can be bought separately. Is available this compressor unit with additional offer: Air transport cca 100m – Europool, Italy For bottles with a neck 28 and 38 mm. This blow molding machine complete with compressor and air conveyors is in excellent condition.

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Ksdpevgu D Sofx Ap Aelw Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: used, Year of construction: 2003, operating hours: 34,000 h, Used Blow Molding Machine Kosme 2003 No. of cavities 4 Preform loader YES Preforms tipper YES Preforms unscrambler NO Compressor NO Air Recovery System NO Type KSB 4 year 2003 Linear or Rotary LINEAR Kjdsvgundjpfx Ap Aslw Capacity: 2,0 l 3000 bph 1,5l 3500 bph 1,0 4000 bph 0,33-0,5l 4500 bph In working condition Without molds Available midle of august 2022 neck 1881 and 1810 have manuals available

Condition: used, Year of construction: 2008, Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. Table of Contents Introduction Overview of the Sipa Rotary Blow Molding Machine 2008 Features and Specifications Benefits of the Sipa SFR8 Applications Maintenance and Care Tips for Choosing a Used Machine Safety Features and Manuals Current State and Availability 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let’s explore its features in detail. Kodpfxjvgufio Ap Ajlw 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Rotary Blow Molding Machine 2008 is manufactured by Sipa, a reputable company known for its innovative solutions in the packaging industry. This machine, specifically the SFR8 model, was introduced in 2008 and has gained recognition for its exceptional performance. 3. Features and Specifications The Used revised Sipa Rotary Blow Molding SFR8 comes with a range of features and specifications that make it stand out in the market: Year: 2008 Manufacturer: Sipa Model: SFR8 Speed: 12000 BPH (Bottles Per Hour) Containers: PET (Polyethylene Terephthalate) Formats: 0.50 L Additional details of the machine include: No. of cavities: 8 Preform loader: Yes Preforms tipper: Yes Preforms unscrambler: Yes Compressor: Not stated Chiller: No Preform neck type: 1810 Air recovery system: Yes Type: Rotary 4. Benefits of the Used revised Sipa Rotary Blow Molding SFR8 Investing in the Used revised Sipa Rotary Blow Molding offers several advantages: Efficiency: With a speed of 12000 BPH, the machine ensures high productivity and optimized production cycles. Precision: The SFR8 provides precise molding capabilities, resulting in consistent and high-quality bottles. Versatility: It accommodates PET containers and supports the format of 0.50 L, making it suitable for various industries and applications. Reliability: Sipa is known for its durable and reliable machines, minimizing downtime and maintenance costs. Innovative Features: The machine incorporates advanced features such as preform loaders, tippers, unscramblers, and an air recovery system for enhanced efficiency.

Condition: used, Year of construction: 2002, Used HDPE Blow Molding Machine TECHNE 10000SFA up to 1690 bph The Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph advances the field of HDPE container blow molding machines significantly. TECHNE manufactured this machine in 2002, equipping it with cutting-edge technology and technical specifications that make it high-performance and reliable. Capacity and Implemented Technologies of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE  produces containers with a capacity of up to 1 liter. Additionally, it uses coex-3 layers technology to ensure container quality and consistency. The machine features an 8-cavity extrusion head with a center distance of 105 mm, allowing for efficient production of 8 bottles per cycle. Furthermore, the linear cold blade cutting system and pneumatic pick-and-place system enhance operational efficiency further. Efficiency and Production Cycle The HDPE Blow Molding Machine TECHNE achives a nominal production rate of 1690 bottles per hour (bph). The production cycle time is approximately 16 seconds. Consequently, this machine produces 40,560 bottles daily and 13,141,440 bottles annually, based on 324 working days per year. Therefore, the Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph suits large-scale operations perfectly. Detailed Technical Specifications Klodpfx Apjvgvqge Aow The machine consists of a single station with extruders of diameters 70 mm/25D, 80 mm/25D, and 60 mm/25D, providing a total output capacity of approximately 320 kg/h. Moreover, DC motors drive the extruders, offering respective power ratings of 33 kW, 41 kW, and 24 kW. The total installed power of the machine is 240 kWh, with an average consumption of 80 kWh. Additionally, the mold’s clamping force is 300 KN, ensuring precise and uniform mold closure. Controls and Cutting System of the HDPE Blow Molding Machine TECHNE The control panel allows you to configure and monitor process parameters, including alarm systems. In addition, the machine uses a cold blade parison cutting system and a pneumatic system for bottle pick-and-place. Multiple cylinders control the parison thickness in a closed-loop position cycle, allowing for independent control of the parison profile for each cavity. Post-Overhaul Performance In 2013, technicians overhauled the machine, installing a new B&R PLC to enhance performance and reliability. The mold closing mechanism uses levers and hydraulic actuators, strategically positioned to ensure perfect distribution of clamping force. Similarly, upper and lower deflashing occurs through a single pneumatic actuator. Conclusion of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE efficiently produces high-quality HDPE containers. Its technical specifications and advanced technologies make it an excellent choice for companies requiring high production capacities and long-term reliability.

Condition: used, Year of construction: 2007, Used Blow Molding Machine Sipa SFR 16 Assessment of Heating System and Preform Feeding Firstly, a comprehensive evaluation of the entire oven system is imperative, encompassing turning-over ramps and tension wheel guides, to ensure an efficient and seamless bottle forming process. Evaluation of Transfer Arms and Cams of the Sipa blower An indispensable aspect pertains to the scrutiny of transfer arms and cams. These components play a pivotal role in maintaining a continuous and uninterrupted production flow. Furthermore, meticulous inspection of their functionality is essential to uphold the quality and precision of the blow molding process. Condition of Molds and Stretching Mechanism Equal emphasis is placed on assessing the condition of molds and the stretching mechanism. The accuracy and integrity of the molds are pivotal in producing flawless, high-quality bottles. Consequently, conducting a thorough assessment of these components is essential to ensure optimal machinery operation. Examination of Water and Air Circuits in the Sipa blower Subsequently, the integrity of water and air circuits, integral components for preform cooling and pressure control during the blow molding process, is scrutinized. Ensuring proper circulation of water and air is crucial for maintaining stable working conditions and guaranteeing the quality of the final product. Kjdpfx Aevgvtuop Aolw Technical Specifications and Additional Details In terms of technical specifications, pertinent details are provided regarding available SKUs and the weight of PET preforms per SKU. Specifically, for 0.5 L, the weight is 14 g, for 1.0 L, it is 26 g, for 1.5 L, it remains at 26 g, and for 2.0 L, it ranges from 29-31 g. It is important to note that the existing molds of the Sipa blower will not be supplied with the machine; replacement is at the discretion of the buyer. Additionally, the preform neck is specified as Corvaglia 28. Further technical details include the identification of the electrical cabinet and Command panel PLC of the Sipa blower as Siemens S7, along with the total number of cavities, which amounts to 16. Main observations on blowing machine Oven and the Preform in-feed Condition of the Following:  Oven, Turning-over ramps _ guiding and tension wheel  Heating modules, Oven ventilation and Cooling shields  Transfer arms and Cams  Moulds and Stretching mechanism  Water and Air Circuits All these are in great conditions  Number of SKUs and PET preform weight per SKU 0,5 L: 14 g 1,0 L: 26 g 1,5 L: 26 g 2,0 L: 29-31 g The existing molds will be supplied along with the machine. Current bottle drawings can be supplied as well. You will replace them if you want something different. Preform Neck Alaska 3-start Electrical cabinet and Command panel PLC: Siemens S7, great overall condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Kjdsquuvrjpfx Ap Aelw Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. Receiver tank - Low pressure - MAX 16Bar 4. Receiver tank - High pressure - MAX 45Bar

Condition: used, Year of construction: 2004, machine/vehicle number: SO127, Blow Molding Machine Contiform – Overview This used Krones Contiform S8 blow molding machine is engineered for high-efficiency production of PET bottles in modern beverage and industrial packaging operations. With a rotary configuration and robust mechanical design, it reaches up to 13,000 bottles per hour, supporting scalable output for medium to high-speed lines. The machine is optimized for PET containers and is suitable for diverse beverage production environments, including water, beer, wine, spirits, milk, oil, and carbonated soft drinks. Krones engineering ensures excellent reliability, consistent bottle quality, and streamlined changeovers. Designed as a versatile component for a used bottling line or as a standalone blow molder, this second hand system delivers precise preform handling and stable heating, coupled with efficient blowing performance. It features an Alaska thread finish, an 8-cavity configuration, and a clockwise work direction, making it a proven choice for beverage production and industrial packaging where uptime and repeatability are critical. Technical Specifications & Performance Data Manufacturer: Krones Model: Contiform S8 Manufacturing year: 2004 Configuration: Rotary Maximum speed: 13,000 bph Container material: PET Current bottle format: 0.5L No. of cavities: 8 Thread/neck finish: Alaska Max container height: 350 mm Kedpfex H Tf Tex Ap Aelw No. of grippers (inlet–outlet): 6 No. of mandrels: 180 Work direction: Clockwise Working plane height: 1470 mm Electrical supply: 400 V, 3-phase, 50 Hz Operating current: 331 A Operating pressure: 40 bar PLC: Siemens HMI: Krones Advanced Automation & Control Systems The Contiform S8 integrates a Siemens PLC for robust automation and process control, complemented by a Krones HMI for intuitive operation and fast diagnostics. The control architecture supports stable preform heating profiles, accurate blowing cycles, and reliable handling of PET preforms and bottles. Safety interlocks and operator protections are integrated into the guarding and access points to support consistent production with minimized downtime. Production Line Integration Capabilities This blow molding machine can operate as a standalone unit or integrate seamlessly into a complete used bottling line. It interfaces effectively with upstream preform feeding systems and downstream air conveyors, rinsers, fillers, and labelers. Format changeovers are streamlined around the 8-cavity rotary platform, and the Alaska neck finish provides compatibility for a wide range of closures and filling monoblocks across beverage production. Machine Condition & Maintenance History The machine is available in multiple supply configurations: as-is, refurbished and guaranteed, or ready for operation with compatible spare parts. When supplied refurbished, a 6-month warranty is available, offering confidence in performance and longevity for second hand indus...

Condition: used, Year of construction: 2009, machine/vehicle number: SO128, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Kljdpsx H Tgdofx Ap Asw Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts. A 6-month warranty is available when supplied refurbished. These options provide flexibility to match project timelines ...

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine clamping force 320t injection weight 6935gr. screw 130mm preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-fold, 4-stage, incl. removal set, conveyor belt LT/h 1825 Output approx. 17,000 preforms/hour Option1: MHT mold 72-cavity for 30.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5 liter bottles) Ksdpfonxkxwsx Ap Aslw Option2: 72 core sets for 27.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0 liter bottles) Line comes from our own preform production and was in production until our new line was replaced.

Condition: ready for operation (used), Year of construction: 1988, A Bekum injection blow molding machine without molds is available. Industry: pharmaceutical, product: plastic bottles, operating bottle volume: 10ml, production capacity: 10ml: approx. 4800pieces/h, materials: PE/PP, machine dimensions X/Y/Z: approx. 6250mm/2200mm/2200mm, weight: approx. 12000kg. The rotary drive of the rotary table appears to be worn out. The injection cylinder of the unit is leaking and further leakages are present. An on-site inspection is possible. Expected to be available from July 2026. Kodsyz Ap Dspfx Ap Aelw

Condition: used, Year of construction: 2017, machine/vehicle number: SO133, Used SIPA blow molding machine 2017 - 18.000 bphTechnical Specifications & Performance DataThis SIPA SFR EVO3 is a rotary stretch blow molding machine designed for high-efficiency PET bottle production in modern beverage operations. As a robust second hand asset for industrial packaging, it delivers reliable output for beverage production lines seeking consistent quality and throughput. The machine features an 8-cavity configuration and supports a broad range of bottle sizes commonly used across water and soft drink applications.Manufacturer: SIPAModel: SFR EVO3Year of manufacture: 2017Production speed: up to 18,000 bottles per hourNo. of cavities: 8Neck finish: PCO 28-1810Bottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsContainer type: Designed for PET bottle handlingBottle diameter (min–max, diagonal): 50–125 mmBottle height (min–max, without neck): 80–349 mmAdvanced Automation & Control SystemsEngineered for consistent performance, the SFR EVO3 integrates advanced automation with precise preform heating and controlled blowing sequences. Operator-friendly HMI and PLC-based control help streamline recipe management, process monitoring, and format changes. The machine architecture prioritizes repeatability of pre-blow and blow phases, promoting stable bottle quality across high-speed runs.Automated process control with user-oriented HMIEfficient preform heating for uniform material distributionQuick-change features to support format adjustmentsSafety-interlocked guards and emergency stop circuitry for operator protectionProduction Line Integration CapabilitiesThis blow molder integrates seamlessly into used bottling line configurations for PET, whether operated as a standalone unit upstream of a filler or synchronized within a complete beverage production line. The included preform feeding and preform cooling systems facilitate smooth infeed and stable production conditions, enhancing overall line efficiency.Inline or standalone operation with standard conveyor interfacesCompatible with downstream filling, capping, and labeling equipmentFlexible handling across 0.5L, 1.0L, and 1.5L bottle formatsSuitable for modernization or capacity upgrades in second hand packaging machinery setupsMachine Condition & Maintenance HistoryThe machine is currently working, indicating operational readiness within an active environment. Built in 2017, it offers a modern platform for operators seeking dependable performance and repeatable quality in PET bottle production. Its status as a functional, second hand unit makes it a strong candidate for rapid deployment in industrial packaging lines.Operational Performance & VersatilityWith 8 cavities and up to 18,000 bph output, the SFR EVO3 balances speed and quality for high-demand beverage production. The PCO 28-1810 neck standard supports widespread closure compatibility, simplifying cap sourcing and ... Klodpfsyhbihsx Ap Aew

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, overall weight: 8,700 kg, workpiece length (max.): 165 mm, workpiece diameter (max.): 35 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Max. output: 7,200 bottles/h Product dimensions Max. preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Max. neck finish diameter: 38 mm Neck height: 9–27 mm Max. bottle height: 350 mm Max. bottle diameter: 105 mm Max. bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Blow module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow module: 6,300 kg Control cabinet: 1,200 kg Preforms feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Kjdpfx Aeyrfvgep Ajlw Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10 % Frequency: 50 Hz ±1 % Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Condition: excellent (used), Year of construction: 1999, operating hours: 48,400 h, 1.0 used blow molding machine Manufacturer: Fischer - W. Müller Model: FMB 3-120 Year: 1999 Clamping force: 120 tons Extruder type: 120/24 WT Accumulator head: BFKS25 (approx. 17.75 kg) Kodpoynutmefx Ap Aslw This machine is capable of producing barrels up to 200 liters in size. Video available!

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC Klsdpfsv Iflpjx Ap Aew This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: HY-43, screw diameter: 110 mm, total width: 2,500 mm, total length: 8,500 mm, total height: 9,500 mm, power: 350 kW (475.87 HP), Equipment: documentation/manual, The two-layer blow molding machine is a new generation of plastic extrusion blow molding equipment. It is mainly used for molding kayaks, canoes, surfboards, and other large hollow plastic products. The machine uses a motor designed to deliver high torque and sufficient power for material cutting. The molten plastic is extruded into a storage die head. When the material reaches the preset volume, the wall-thickness control system continuously adjusts the opening ratio. Ksdjx R R Igjpfx Ap Ajlw The extruded material is formed into a parison, which is then molded into the final product.

Condition: like new (used), Year of construction: 2025, CARLO SALVI 476 SV revised to new 4,76x45 mm. Kljdsh N Di Djpfx Ap Asw 450 ppm - New electrical system according to CE standards with inverter and PLC - New Lubrication System - New engine with disc, pulley and brake - New thread take-up roller pump - New belts - Rectification of all parts of the Central - Pins, Bushings and Nuts replacement - New bearings Available in CALOLZIOCORTE (LC) c/o HBR srl. HBR will provide to the total revision.

Condition: used, Year of construction: 2004, operating hours: 45,000 h, Used Blow Molding Machine KOSME KSB 4L up to 6800 bph The KSB 4L blow molding machine is built specifically for producing PET bottles. Notably, it offers a robust, compact solution for high-performance production. Its design is both innovative and technically straightforward. As a result, it ensures optimal efficiency and a high quality-to-price ratio. With four cavities, it effectively produces up to 6,800 bottles per hour. In addition, it accommodates formats from 0.1 to 2.5 liters. The solid, well-organized structure of the KSB 4L provides operators with flexibility and reduced maintenance needs. Furthermore, the machine has completed 22,000 hours of operation. It also includes two original molds, one for 0.5 liters and one for 1 liter. Heating system and preform feed in the Blow Molding Machine KOSME KSB 4L To achieve its heating capabilities, the KSB 4L’s heating system uses four heating modules and eight heating provides a heating capacity of 46 kW. Moreover, its patented positioning system places infrared lamps precisely, thereby ensuring optimal external heating of preforms without opening the oven. For efficiency, the conveyor belt system for preform feed orients and positions the preforms. It streamlines the heating process and thus reduces preparation times. Kjdpevgvb Eefx Ap Ajlw Blowing process and production efficiency Furthermore, the Blow Molding Machine KOSME KSB 4L’s pneumatic preform separation system adjusts the preforms’ distance from 40 mm in the oven to 120 mm in the mold. Then, the blowing process operates in a fully replaceable station, which adapts to different bottle diameters as needed. Afterward, the transfer unit moves heated preforms into the mold cavities, where they undergo sealing, stretching, and blowing. Each cavity consequently produces up to 1,700 bottles per hour, thereby achieving high precision and stability in production. Consumption and energy requirements In terms of energy, the KSB 4L operates on a voltage of 3 x 230/400 V, with a frequency of 50 or 60 Hz, an installed power of 56 kW, and an average consumption of 36 kW. Additionally, the compressed air system maintains a working pressure of 10 bar and a blowing pressure up to 40 bar, consuming 470 Nm³/h of air. In addition, the cooling system requires a water flow of 6.6 m³/h at an inlet temperature of 5 to 7 °C, achieving a cooling capacity of 20.8 kW. Operator advantages and maintenance Notably, the design allows easy access to all internal components, thereby enabling quick format changes and simplifying mold replacement, which takes an average of only 30 minutes. Furthermore, its linear movement arrangement and durable construction materials minimize maintenance needs. Additionally, the touch-screen interface lets operators input parameters for different types of preforms and bottles, and the system offers password protection to enhance operational security. Conclusion of the Blow Molding Machine KOSME KSB 4L In conclusion, the KSB 4L serves as an ideal solution for those seeking a reliable and high-performance used machine that produces PET bottles with precise specifications and optimized consumption.

Condition: used, Year of construction: 2007, Used Blow Molding Machine SIPA SFR12 18000 bph General Features of the SIPA SFR12 Blow Molding Machine The Used Blow Molding Machine SIPA SFR12 18000 bph performs PET container stretch blow molding and SIPA manufactured it in 2007. As a result of its SFR12 configuration, which includes 12 cavities, the system reaches a nominal speed of 18,000 bottles per hour. Consequently, it delivers high production efficiency across multiple formats. Specifically, this machine processes volumes from 0.25 to 2 liters. Therefore, it fits seamlessly into high-speed bottling lines, particularly in the mineral water and soft drink industries. Moreover, thanks to its compact layout, it optimizes floor space usage. Preform Compatibility and Technical Specifications This machine processes preforms with 3-start Alaska neck finishes and supports weights ranging from 12 to 34 grams. In particular, operators can quickly change formats thanks to the integrated quick-change system, which significantly reduces downtime. In addition, the automated system feeds, tips, and orients the preforms accurately. As a result, the machine ensures a continuous and correctly aligned flow into the heating and blowing stations. Furthermore, this setup minimizes manual intervention and improves process reliability. Notably, the Used Blow Molding Machine SIPA SFR12 18000 bph maintains stable, uninterrupted production across varying operational conditions. Integrated Systems and Automation The machine uses a Siemens PLC for core process control; thus, it guarantees reliable and intuitive management in industrial environments. Furthermore, the system includes certified safety protections, which enhance operator safety and regulatory compliance. Additionally, the air recovery system reduces energy waste and lowers operational costs. Equally important, the rotary blowing system distributes pressure and heat evenly across all cavities. Hence, the machine ensures uniform container quality even during high-speed operation. In comparison to older models, this version offers improved thermal control and air distribution efficiency. Operational Status and Technical Documentation Currently, the Used Blow Molding Machine SIPA SFR12 18000 bph remains in storage, although it is ready for recommissioning after standard inspection or overhaul. Fortunately, the machine includes original technical manuals, available spare parts, and revision records, which together facilitate seamless installation and integration. Moreover, the documentation enables faster troubleshooting and efficient maintenance scheduling. Ksdpfx Asxqmp Rjp Ajlw Technical Summary for Line Integration Overall, the Used Blow Molding Machine SIPA SFR12 18000 bph delivers a robust and high-performance solution for production facilities that require consistent, flexible, and high-throughput blow molding. Because of its solid engineering and standard-format compatibility, it serves as a strategic asset for companies looking to upgrade or expand bottling capacity. Furthermore, the availability of auxiliary components and spare parts, along with comprehensive documentation, allows for rapid and reliable integration. Ultimately, this machine enhances line performance while supporting operational continuity and cost-efficiency.

Condition: new, Year of construction: 2025, operating hours: 150 h, functionality: fully functional, power: 35 kW (47.59 HP), For sale: preform blow molding machine with automatic feeding, 4 cavities, 3,500–4,000 pcs/hour for volumes up to 0.6L, neck diameter 38mm, max diameter 65mm, max height 230mm, 35 lamps, average consumption 22kW, low-pressure air consumption 1,600L/min, blowing pressure 25–35kg/cm2, high-pressure air consumption 2,500L/min, chiller included 5,600Kcal/h and 30L/min. Dimensions: 3.7 × 1.95 × 2.1 m Kledpfxoyhh Nue Ap Asw Weight: 3,700 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, Manufacturer: S.P.A Magic M.P. Model: MGL2D This blow molding machine is fully functional. It is still in production and can be inspected by appointment. Kodpsxxp Tbefx Ap Aelw Videos can be provided upon request. PRICE REDUCTION!!! From 21,000 to 19,000 EUR!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment Kledpfsuiq Dhex Ap Ajw • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Semi-automatic PET bottle blow molding machine Kedpfjugu E Rjx Ap Aolw Manufacturer: FERENC Model: F-1400 Year of manufacture: 2006 Output: approx. 800 pcs/h Number of molds in the machine: 2 x 5 L (48 mm cap) Oven dimensions: - Length: 900 mm - Width: 900 mm - Height: 1200 mm Blow molder dimensions: - Length: 1800 mm - Width: 750 mm - Height: 2000 mm Set weight: 1200 kg Technical condition: used machine

Condition: like new (used), Year of construction: 2020, operating hours: 400 h, functionality: fully functional, total width: 2,438 mm, total length: 6,058 mm, total height: 2,591 mm, empty load weight: 9,500 kg, input voltage: 400 V, Complete PET blow molding and water bottling line for 1L bottles. Enclosed in a container, self-sufficient with generator, water treatment unit, compressor, and all necessary infrastructure. Additional information available in the photos and YouTube videos. Ksdpfx Apsx Hqrwo Aslw