Used Parts Cleaning Machine for sale (71,644)

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, workpiece weight (max.): 15 kg, inner dimension height: 95 mm, inner dimension length: 260 mm, negative pressure: 10,000 Pa, No minimum price – guaranteed sale to the highest bidder! Cleaning machine as a single-chamber flood system operating under full vacuum. The machine will undergo a complete overhaul in 2026 with an estimated value of €16,800 and is in very good condition. The original new price of the machine was €104,000. TECHNICAL DETAILS Cleaning medium: halogen-free hydrocarbon or modified alcohol Cleaning basket dimensions: 260 x 160 x 95 mm Batch weight max.: 15 kg MACHINE DETAILS Nodpjzh Eiqjfx Abwjld Overall length: 1,260 mm Overall width: 1,110 mm Overall height: 2,600 mm Total weight: 1,600 kg EQUIPMENT CE marking in roll-on/roll-off standard version Complies with the 31st German Federal Immission Control Ordinance (BImSchV) (as of August 21, 2011) Complies with the Swiss Air Pollution Control Ordinance (as of March 1, 1998) Complies with the Austrian VAV Ordinance (as of July 26, 2022) Complies with the EU VOC Directive 199/13

Year of construction: 2017, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: MAXI 91-2, The machine has been thoroughly inspected by IBS, and the pump has been newly sealed. Current pictures to follow. Easy operation thanks to a fully automatic cleaning process, allowing skilled personnel to focus on other important tasks. The wash tank is filled with a mixture of water and soluble IBS special cleaner (washing solution). Contaminated parts to be cleaned are placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the device is switched on and the solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump units draw the cleaning solution from the wash tank and distribute it via six stainless steel spray pipes with overlapping flat spray nozzles. The parts to be cleaned are intensely sprayed with the hot solution from all sides during the steady rotation of the motor-driven basket. Once the cleaning cycle is finished, the device shuts off automatically. Advantages Nlsdpfsudz D Uox Abwjd - 2 pumps arranged horizontally - 6 three-dimensionally arranged stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (diameter 170 mm) - Rotating stainless steel wash basket, V-belt drive with a separate motor - Steam extraction - Stainless steel perforated screen with filter basket above the wash tank - Low water level safety device - Individually height-adjustable feet Technical Data Capacity of immersion tank/basket: 190 l Diameter of immersion tank/basket: 910 mm Load capacity: 200 kg (optional 300 kg) Temperature min. - max.: 0-60 °C Working height: 500 mm Dimensions (W x D x H): 1310 x 1160 / 1350 x 1285 / 2000 mm Weight: 150 kg Heating output: 6 kW Spray rate: 2 x 6,600 l/h Material: Stainless steel Electrical connection: 8 kW / 400 V / 50 Hz Pump pressure: 2.5 bar

Year of construction: 2011, condition: good (used), functionality: fully functional, Clean-o-mat SP 120 Usable basket diameter approx.: 1140 mm Usable height approx.: 500 mm Loading height approx.: 830 mm Permissible basket load: 500 kg Fluid volume: 210 l Pump delivery rate: 280 l/min Connection data: 230/400 V / 24 A / 50 Hz Nodpfx Aeyth Uzjbwsld Pump motor power: 4 kW Heating capacity: 9 kW Rotary basket drive: 0.09 kW 1-stage steam extraction: 0.45 kW Overall height approx.: 1250 mm

Year of construction: 2000, condition: excellent (used), 1 x Parts Cleaning System Malmkvist Turbex 2000 Year of manufacture: approx. 2000 with heating 3 selectable programs: - Washing + drying - Washing - Drying Wash and dry times are adjustable. In very good condition. Nlodpoy I Nr Ejfx Abwjd Technical data: Max. load weight: 20 kg Drum diameter: 400 mm Drum length: 500 mm Heating capacity: 6 kW for dry air blower as well as washing medium Temperature adjustable 0 - 80 degrees Accessories: 3 x washing baskets with three different hole diameters (1.5/2.5/5 mm) + Rack (homemade) 1 x roller conveyor with loading/unloading chute Operating manual + wiring diagrams The machine can be inspected under power.

Year of construction: 2006, condition: used, Technical data of the basic equipment Electrical connection values: Device total 230/400V 50Hz 50A 35 KW Motor washing pump 400/690V 50Hz 9,5A 4KW Heating elements: (3x9kW) 230/400V 50/60Hz 13,5A 9KW Motor steam extraction 230/400V 50HZ 1.1A 0,45kW Motor rotary basket drive 230/400V 50Hz 1.1A 0.37kW Pneumatic connection values: Compressed air supply line min. 6 bar / max. 10 bar Performance data: Wash pump flow rate 280 l/min Delivery pressure washing pump 5 bar Dimensions, weights, contents data: Liquid volume tank 1 washing 650 L liquid volume tank 2 rinsing 265 L perm. basket load 750kg usable basket diagonal 1400 mm Nedpfx Asn Nyt Hsbwjld usable height in the unit 800 mm loading height 920 mm height approx. 3010 mm width approx. 2365 mm depth approx. 1665 mm empty weight approx. 1320 kg

Year of construction: 1993, condition: excellent (used), 1 x parts washing machine Armleder W 25 Year of manufacture: 1969 Nlsdpfenl Ekrjx Abwjd Technical data: Drum dimensions: 330 x 350 mm Installation dimensions: l: 0.8 x w: 1 x h: 1.1 m The machine can be viewed at our warehouse under power at any time.

Condition: new, The rotary type cleaning unit allow to process parts directly on board the work-cells avoiding costly transport operations. The transfer of the components takes place with an in-built rotary index transfer system which guarantees satellite positioning at loading / unloading and inner operations. Considerable flexibility in the change of costumized jigs as components holders. Elimination of packaging costs and transport costs Re-equipment of the plant in a very short time Number of satellites to be selected in accordance with a defined and accurate washing, blowing and drying process; Nlodpfxowdfyqe Abwod These plants are fit for the treatment with aqueous detergent solutions, as: Critical machined parts and delicate parts with blind holes and threaten holes, compoenent as: valve bodies, automatic actuators, burner bodies, water meters, friction flywheels, gas valves, hydraulic, pneumatic multichannel distributorss. a.s.o.).

Year of construction: 2025, condition: new, functionality: fully functional, load capacity: 75 kg, The Wave 450 parts cleaning unit is a very flexible vacuum assisted degreasing machine able to perform an high degree of parts decontamination. Nlsdpowc Sdasfx Abwed All the operations such degreasing cycle as spray, immersion jets, ultrasonic, as well the distillation and filtration process and parts drying treatment are sequenced in automatic way and in a total vacuum ambient. The Wave 450 machine can operate with: Modified Alcohol solvents (MA) / Hydrocarbons Class III (H-III) / Chlorinated (PER) Those solvents are specifically used when the demand calls for a strong degreasing phase, evaporate completely without leaving debris residues on the processed parts. Standard features  Continuous solvent distillation  Full solvent distillation  Sludge stripping 2nd distiller Oil/solvent separation  Full solvent filtration at each cycle  Chip drying and deodorizing before emptying by the operator  Chip drying and deodorizing before opening / cleaning by the operator  Vacuum / solvent charging - discharging system  Water/solvent separation Distillation The distillation of the solvent enalble to maintain unchanged the degreasing power of the solvent. All our systems offer the double stage distiller as standard, guaranteeing the separation between solvent and oils, further expulsion of water takes place in the water separator. PLC S7 and HMI 12" Siemens are a standard feature The machine is compliant to Industry 4.0 and so Industry 5.0. Basket dimension is: mm 480 x 300 x 200 H

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250107, total length: 2,000 mm, total width: 1,900 mm, total height: 3,050 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, maximum load weight: 700 kg, workpiece weight (max.): 700 kg, cage diameter: 1,390 mm, Single-stage cleaning machine Principle of operation, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley. Nlsdevvuzcopfx Abwjd

Condition: excellent (used), 2-tank metalparts-cleaning machine usable length: 800 mm usable width: 600 mm usable hight: 400 mm Nedpfxezndnle Abwsld loading capacity: 150 Kg. volume of washing-tank: 1.000 Ltr. volume of flush-tank: 1.100 Ltr.

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Nledozkkc Ujpfx Abwod Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Nedpfx Ajt Ity Dsbwjld Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. Nlodpfx Aov Sa I Tobwsd In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Nodpfx Abev S Dihswold Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: used, functionality: unexamined, Year of construction: 2012, Available for shipment. Machine is operational condition. Ask for additional information including photos and pricing! Nljdpfx Aoyup R Tsbwed

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, NEXUS: Trusted by Professionals Nedozphlwopfx Abweld Proven Performance in Contour Edge Banding A proven contour edge banding machine designed for easy operation by users of all experience levels. Continuously improved through real customer feedback, NEXUS incorporates innovative features that significantly increase the speed and efficiency of your production process. Key innovations include a 3D laser scanning system that accurately copies the panel contour and measures the required edge band length with millimetric precision, a chassis-integrated edge band roll feeding table, and convenient automatic or manual operating modes selected through the touchscreen control panel.

Condition: defective spare-parts repository (used), Manufacturer: Illig Type: HSA 50C Nlsdeuk Dwfopfx Abwsd The machine is incomplete and not operational! For spare parts only!!

Condition: used, Year of construction: 2005, functionality: fully functional, fuel type: electric, empty load weight: 172 kg, total length: 1,530 mm, construction height: 1,050 mm, drive type: Elektro, construction width: 1,100 mm, Sweeper Condition: Ready for use and fully functional Technical condition: normal Front tire size: 3.00-4 Nedpszmbi Rofx Abwsld Description: In addition to this Hako model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing at favorable terms are possible for us at any time. We also gladly buy your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this B755. P.S.: Our forklift repair shop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sales. Working width: 750 mm; Effective sweeping width: 1100 mm

Condition: new, Year of construction: 2026, CORMAK CL300 Pulsed Laser Cleaning Machine 300W The CORMAK CL series pulsed laser cleaners are industrial devices designed for fast, precise, and non-contact removal of contaminants from metal, non-metal, and wooden surfaces. Depending on the application requirements, three power variants are available – CL200, CL300, and CL500 – all based on JPT MOPA pulsed fiber laser sources. This ensures high process stability, a wide range of parameter adjustment, and the ability to work both with delicate components and more demanding surfaces. Technical Specifications Parameter Value Dimensions (W × H × D) 260 × 460 × 490 mm Weight 31 kg Laser Source Brand JPT Fiber Interface QCS Operating Mode MOPA Laser Wavelength 1064 nm Maximum Pulse Energy 5 mJ Fiber Cable Length 5 m Laser Pulse Frequency 1–3000 kHz Pulse Duration 13–500 ns Laser Spot Size 7 ± 1 mm Laser Line Length 0.01–150 mm Laser Line Width 0.01–150 mm Process Gas None required Scanning Area (Lens) 130 × 130 mm, F254 Cooling System Air-cooled Scanning Speed 0–30000 mm/s Operating Temperature 10–30°C Operating Humidity < 70% non-condensing Operating Voltage AC 230 V, 50/60 Hz Efficient and Precise Surface Cleaning CORMAK laser cleaning systems effectively remove: rust, paint coatings, varnishes, operational deposits, oxides, oil residues, resins, and other difficult contaminants. Thanks to adjustable pulse energy, frequency, and pulse duration, the cleaning process can be optimized for both: precise and selective cleaning of molds, dies, tools, and precision components, and efficient preparation of larger surfaces for further processes such as welding, painting, or bonding. The non-contact nature of laser cleaning minimizes the risk of mechanical damage, microcracks, or deformation of the base material. Advanced JPT MOPA Technology Nodpfxsy Sgn So Abwsld The use of JPT MOPA laser sources provides a wide adjustment range for pulse frequency and pulse width, allowing optimal energy density settings depending on the type of contamination and the base material. The long fiber cable increases working flexibility at greater distances from the main unit, which is especially useful when working on: large structures, production lines, installed machine components, steel constructions, molds, facades, and industrial equipment. All CL series models operate at a wavelength of 1064 nm, ensuring high effectiveness on common industrial materials such as: structural steel, stainless steel, aluminum alloys, and many other technical substrates. Cost-Effective and Environmentally Friendly Operation The CL series devices are air-cooled and do not require process gases or abrasive materials, which: simplifies installation, reduces operating costs, minimizes maintenance requirements, and makes the cleaning process more environmentally friendly. High scanning speeds combined with adjustable beam parameters significantly reduce processing time compared to traditional methods such as: sandblasting, shot blasting, or chemical cleaning, while ensuring repeatable results and a high-quality surface finish after cleaning.

Condition: used, Cleaning washing defatting machine PERO type ROBOMAT 7A Useful length: 1600 mm Useful width: 1040 mm Useful height: 960 mm Njdpfjzm Swfjx Abwold Loading height: 800 mm Maxi load weight: 1500 kg

Condition: excellent (used), Year of construction: 1988, wire working range: 0,1 - 1,3 mm cutting length: 5 - 70 mm Njdpfx Abo Syv Tjwold output: 400/min. complete with ciller and motorized decoiler

Year of construction: 2006, condition: used, Colour: Grey Empty weight: 400 kg Dimensions (LxBxH): 170 x 132 x 113 cm Nsdpfx Abezkqx Ajwsld - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 1924 - Drive system: Conventional - Rotary table: Yes - Number of turbines [pcs]: 1 - Max. workpiece length [mm]: 600 - Max. workpiece height [mm]: 265 - Transport dimensions: 1700mm x 1320mm x 1130mm (l x w x h) - Transport weight [kg]: 400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: electric, empty load weight: 458 kg, total length: 1,500 mm, construction height: 1,330 mm, drive type: Elektro, construction width: 1,000 mm, sweeping width: 950 mm, Sweeper Condition: New Nodjzc Avlspfx Abwsld Technical Condition: New Front Tire Condition: New Rear Tire Condition: New Battery Voltage: 24V Battery Capacity: 210Ah Battery Year of Manufacture: 2025 Description: Machine has undergone a complete workshop inspection, has been cleaned, and has passed a new UVV (accident prevention regulations) and inspection!

Condition: used, Year of construction: 2013, operating hours: 915 h, functionality: fully functional, power: 24 kW (32.63 HP), fuel type: diesel, empty load weight: 1,700 kg, total length: 3,126 mm, construction height: 1,969 mm, drive type: Diesel, construction width: 1,090 mm, sweeping width: 1,850 mm, Street sweeper Speed class: 25 Condition: Ready for use and fully functional Technical condition: normal Description: Machine completely inspected in the workshop, cleaned, and passed new UVV and inspection! Nledpozk Sghefx Abwjd - Rear-view camera and monitor - Reversing light - Working light on the right - Universal tires - Safety package - Spreader cable - Driving speed 20 km/h - Lubrication points for container and sweeping unit - Seat with mechanical suspension - Universal suction container with circulating water system - High-pressure cleaner - Sweeping unit with 2 brushes - Suction nozzle attachment - Disc brush, plastic - Hand suction hose

Condition: used, Year of construction: 2008, input voltage: 380 V, type of input current: three-phase, input current: 8 A, We are offering this used elumatec EV 884 corner cleaning machine, manufactured in 2008. Type: EV 884 Serial number: 88009009 Nsdjzk Eahjpfx Abwsld Rated voltage: 380 V Frequency: 50 Hz Number of phases: 3-phase Rated current: 8 A Date of manufacture: 28.11.2008 If you have any questions or require further information, please do not hesitate to send us a message or call us.