Used Pet Machine for sale (64,638)

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each Giodpfx Aswcggven Ret • Preform transfer Wheel • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. • Bottle transfer Wheel • Delivered with pallet turner. DOCUMENTATION AVAILABLE

Condition: ready for operation (used), Year of construction: 2004, PET preform injection molding machine clamping force 320t injection weight 6935gr. screw 130mm preform removal system SERVO IV, TPS robot TRT-M4-72-E, 72-fold, 4-stage, incl. removal set, conveyor belt LT/h 1825 Output approx. 17,000 preforms/hour Giedpjnxkxwsfx An Rst Option1: MHT mold 72-cavity for 30.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.5 liter bottles) Option2: 72 core sets for 27.8 gr. PCO 1810 or 1881 (shorty, 28mm neck ring, 1.0 liter bottles) Line comes from our own preform production and was in production until our new line was replaced.

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Gisdpfxoutni Re An Rot Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional Giodpfx Anowa Rhrj Rjt

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Gisdpfxekucxlo An Rot Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Condition: used, Year of construction: 1999, - PET-Blow moulding machine, make Sidel, type: SBO 16 with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale. Gisdpsrazwrofx An Ret - PET-Blow moulding machine, make Sidel, type: SBO 20, with preform tipper, preform feed, unscrambler, preform transport, built 1999, already dismantled, ex location for sale.

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Very good condition Giodpfx Ajvddkven Ret

Condition: used, Year of construction: 2006, Semi-automatic PET bottle machine – ZENTRONIK ZR-7 1. Heating oven for PET preform heating Gjdjwnzdajpfx An Rsit 2. Semi-automatic PET bottle production machine Mould: double-cavity for 5.0L bottles (48 mm cap) Output: approx. 800 bottles/hour Technical condition: used, operational

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Godpfox A Uu Eex An Rjit Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 3,188 kN, injection weight: 6,935 g, screw conveyor diameter: 130 mm, production capacity: 17,000 unit/h, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 320 t Shot weight: 6,935 g Screw diameter: 130 mm Performance: 17,000 preforms/h Giodjx A Efhjpfx An Ret MACHINE DETAILS Configuration: 72-cavity, 4-stage EQUIPMENT Take-out unit Conveyor belt LT/h 1825 TPS robot TRT-M4-72-E

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,500 h, functionality: fully functional, Technical Specifications: Giedpfx Ashwm N Sjn Rjt Output Capacity: 500 kg/h Material :PET Other Specifications: Washing and drying: manufacturer Apro Grinder, conveyor, other parts: manufacturer Amis PET bottles in pressed form, up to 2 litre bottles The producer of the line it’s AMIS Recycling Technology for Conveyor and Grinder, together with APRO APPARATE UND ROHRBAUGESELLSCHAFT mbH for the washing and drying parts. Input Capacity 500kg/h with sharp knives

Condition: new, Year of construction: 2025, functionality: fully functional, Full automatic pet blowing machine- linear Full Servo Drive. 4 cavities to 2000ml Gedpewrrcnsfx An Rsit Brand new blowing capacity 4000bph Low energy consumption

Condition: used, functionality: fully functional, The SMF COMBI 400 is an automatic blow molder designed for the efficient and high quality production of PET bottles. This machine combines advanced technologies to offer continuous, accurate operation with minimal manual intervention, ideal for bottling plants requiring flexibility and performance. ADVANTAGES OF HS AND COMBI SERIES: • Low energy consumption • Modular construction Gisdpfx Aewny Eisn Rot • Silent work • Space saving, compact design • Easy change- overo f bottle size and types of neckrings • Advanced PLC control system with user friendly interface • Built-in memory of the PLC saves parameter sets required to produce different bottle sizes. • Pyrometric temperature measurement – Power Wizard KEY BENEFITS • Proven system working in hard environmental conditions • Powerful heading unit with precise controller and convenient adjusting mechanism • Minimum transfer space for the air distribution system • Simple, robust and durable operation MAIN PARAMETERS Blowing air quantity (25 BAR): 3.46 m3/h Mold material: FORTAL

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: hydraulics, Car carpet washing machine Condition New Brand NMTEH Type Compact water 2 L/min Manufacturer Warranty 1 Year Voltage 220 Model NMTEH Country/Region of Manufacture - Latvia Cord Type Corded Power: 2,5kW Item Weight ~200kg Auto carpet washing machine The difference from other devices - does not break the embedded plastics Godpfov A T Tqsx An Roit Cleans well fabric and rubber mats Cleans rubber carpets up to 20mm high edges Hard carpets that are thick. Ours is universal and will work a long time. Blow system Without water cleaning With water cleaning automatic heating system Water conection 3/4

Condition: excellent (used), Opportunity! Previously owned by the German government, we are pleased to offer this top-quality liquid handling system, type "Genesis RSP 100/8," from the global brand TECAN, as a complete system with all accessories, from a single source. The fully automated Genesis RSP 100/8 pipetting robot system is one of the most reliable systems available today and is an indispensable part of any laboratory. All components are in excellent condition; the system has never been used industrially and has seen very little use. All devices are in excellent optical and technical condition and show no significant damage – see pictures. The extensive range of accessories provides you with a complete system that you can start using immediately. Scope of delivery: - TECAN RSP 100/8 Liquid Handling System - Eppendorf Gradient PCR Mastercycler - Olympus DP10 Digital Microframe Camera for Droplet Size Monitoring - GeSim 1.2 Nanoplotter with Housing - Diluter 4 - NPC 8 Software - Gemini v4.2 Software Gisdpfx Aswltr Rjn Ret - Cables, manual, power supplies, and small parts - Various pipette tips in various sizes (2 boxes containing approximately 10,000 pieces) Dimensions: (D) x (H) x (W): 78 x 94 x 106 cm Weight: approximately 145 kg Shipment will be made within three business days after receipt of payment by insured freight forwarder. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and two pallets, is approximately 250 kg! This sale is exclusively for businesses; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold excluding any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: used, Year of construction: 2009, machine/vehicle number: PR21, Used injection molding machine HyPET 120 - 2009Technical Specifications & Performance DataThis Husky injection molding machine is engineered for high-volume PET preform manufacturing and is well suited for integration into a used bottling line or as a second hand addition to industrial packaging operations. The 120-ton clamping platform is paired with a 32-cavity hot runner system, enabling consistent output of PET preforms across multiple bottle formats. Manufactured by Husky in 2009, the unit is configured for rapid mold changeovers and stable cycle times, supporting beverage production with precise neck finishes and preform weights.Manufacturer: HuskyModel: HyPET120 P85/95 E85Year of manufacture: 2009Clamping force: 120 tonsCavities: 32Hot runner system: Husky 32-cavity hot runner, common across supplied moldsNeck finishes: 29/25 mm primary; additional parts for 30/25 mmPreform weights (29/25 mm sets): 9.02 g, 12.46 g, 18.70 gAdditional 30/25 mm parts: 10.5 g, 14.0 g, 22.0 g, 25.0 g (one complete assembled set at 22.0 g)Cycle times (typical): 7 s, 8 s, 9 sElectrical supply: 400 V, 50 Hz, 3PH+N+PEMain supply current: 191 A (auxiliary supply: 40 A)Short-circuit rating (panel): 10 kAIncluded peripherals: Plastic Systems resin dryer with material hopper, mold dehumidifier, and available sparesBottle formats supported via preforms: 0.2L, 0.5L, 1.0LContainer material: PETAdvanced Automation & Control SystemsThe machine features Husky engineering for precise temperature control, shot stability, and efficient thermal management across the 32-cavity hot runner. The molding system supports fast setup with plug-and-play cold half plates, simplifying changeovers between formats and weights. Operator interaction is streamlined through an integrated control interface for recipe management, alarm diagnostics, and process monitoring. The control panel is designed for industrial duty with a 10 kA short-circuit rating and clear segregation of main and auxiliary supplies.Integrated HMI for process control and monitoringHot runner temperature control across all 32 cavitiesQuick-change cold half plates, tooling plate, and cooling pick setElectrical: 400 V, 50 Hz, three-phase with neutral and protective earthProduction Line Integration CapabilitiesOptimized for PET preform manufacturing, this system integrates cleanly with upstream resin handling and downstream conveyance to stretch blow molding, quality inspection, and packing stations in beverage production. The included Plastic Systems resin dryer and mold dehumidifier stabilize material and mold conditions, enhancing repeatability and line throughput in broader bottling equipment ecosystems.Inline or standalone operation for preform supplyCompatible with industrial packaging and beverage produ... Gsdpjyhbd Sjfx An Rsit

Condition: excellent (used), Year of construction: 2005, Mechanical guillotine shears Fab. Petersen Machinery Type. Cidan HSM-F 20/3 Year 2005 Technical data Make: CIDAN Type: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Cutting angle 2° Connection 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 Weight: approx. 1.5 tons Gjdpfxou Utais An Rsit Equipment - Man. Backgauge 750mm - Continuous hold-down device with hard rubber strip - Angle fence - Extendable support table All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2019, Petratto DP66 Pressing Machine, used The Petratto DP66 is a professional pressing machine specifically designed for use in print finishing. It impresses with its robust construction, modern controls, and high flexibility when processing various paper formats and thicknesses. The machine is ideal for print shops and bookbinderies that value precision, reliability, and efficiency. Key Features - Robust industrial design for continuous operation - Easy operation via a clear control panel with emergency stop, start/stop, and program selection buttons - Digital control with display for precise settings and programming - Flexible feeder for various paper formats and thicknesses - Safety features such as emergency stop switch and protective covers - 400V connection for powerful operation - Year of manufacture 2019, ensuring modern technology and current safety standards Technical Specifications - Manufacturer: Petratto Srl, Italy - Model: DP66 - Type: 66 - Year of manufacture: 2019 - Power supply: 400 V - Control panel: Digital, programmable - Safety equipment: Emergency stop, protective covers - Application: Pressing tasks, further processing of paper All-Inclusive Service Package Giodpfx Anew Evd Ae Rot We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Giedpfxet Ity Dj An Rot Drying fans: 12db Voltage: 380 V

Condition: new, Year of construction: 2026, -Tfon Leveltech® S-3513 Leveling Machine. Gijdpfxekyrzle An Ret -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results -Key Specifications: Material Thickness: 0 – 0.3 mm -Maximum Material Width: 1.300 mm Minimum Material Length: 70 mm Quick Change System for Straightening Rollers: Standard Flattening Gap Adjustment: Electromechanical / PC Controlled. Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm Total Weight: 5.000 kg.

Condition: new, Year of construction: 2026, -TFON Leveltech® XS-3520 Leveling Machine. Gisdpfsityvfjx An Rot -The TFON Leveltech® XS-3520 is a compact and efficient leveling solution designed for thin materials and smaller widths. Equipped with advanced electromechanical controls and user-friendly touchscreen operation, it delivers precision leveling with reliable overload protection for enhanced safety. -Key Specifications: Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width: 200 mm. Minimum Material Length: 70 mm Flattening Gap Adjustment: Electromechanical / PLC Controlled. Overload Protection: Standard Control Interface: Touchscreen HMI Machine Weight: 2,000 kg Machine Dimensions: (L × W × H): 2,225 × 1,595 × 1,850 mm

Condition: new, Year of construction: 2026, -Tfon Leveltech® TF M-5516 Leveling Machine Engineered for precision leveling, the TF M-5516 efficiently handles material thicknesses from 1 to 15 mm with advanced control features for optimal performance and ease of use. -Key Specifications Giodpskyrqfsfx An Ret -Material Thickness: 1 – 15 mm -Maximum Material Width: 1,600 mm Minimum Material Length: 110 mm Quick Change System for Straightening Rollers: Standard Flattening Gap Adjustment: Servo Hydraulic / PC Controlled. Overload Protection: Standard Control Screen: Touchscreen Machine Size (L × W × H): 3,500 × 2,905 × 1,950 mm Total Weight: 19.000 kg

Condition: new, Year of construction: 2026, -Tfon Bevel Wizard® Linear. -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. Gijdpfert Tpnsx An Ret -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. - Optimized for Large Workpieces: Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm -Minimum Material Width: 250 mm Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm. Emery Band Drum Diameter: Ø400 mm. Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency.

Condition: new, Year of construction: 2026, -TFON Leveltech® Leveling Machine Series Models: S-3560, S-3511, S-3513, S-3516 -Designed for precision leveling of thin materials, these machines feature advanced electromechanical controls and user-friendly touchscreen interfaces for efficient operation. -Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width. -S-3560: 600 mm -S-3511: 1.100 mm S-3513: 1,300 mm S-3516: (width not specified) Minimum Material Length: 70 mm Flattening Gap Adjustment: Electromechanical / PLC Controlled Overload Protection: Standard. Control Screen: Touchscreen Machine Weight: S-3560: 5.000 kg S-3511: 10.000 kg S-3513: 14.000 kg Machine Dimensions (L × W × H): S-3560: 1,985 × 1,585 × 1,820 mm S-3511: 2,485 × 1,585 × 1,820 mm S-3513: 2,695 × 1,585 × 1,820 mm Gedpfx Anehwb Utj Roit

Condition: like new (used), Year of construction: 2018, operating hours: 200 h, XYZ 500 LR Vertical Machining Centre (2018) Siemens 828D Control with Shop Mill, Optimised Digital Servo Drives, Rigid Tapping,Flood Coolant, Worklight, 12 Station Carousel ATC, Easy Clean Swarf Tray, Steel Concertina Guards on all axes, Powder Coated Guarding, Pull Studs, USB Port Giodpfsy R S Unox An Ret Technical Specification: X Axis Table Travel: 500 mm Y Axis Table Travel: 400 mm Z Vertical Travel: 440 mm Table Size: 580 × 400 mm Spindle Centre to Column: 415 mm Spindle to Table: 100 – 550 mm Column Front to Table Centre: 215 – 615 mm Rapid Feedrate: 20 m/min Cutting Feedrates: 1 – 20,000 mm/min Max Table Load: 250 kg Spindle Speeds: 5 – 8,000 rpm Spindle Motor: 15 kW (20 hp) Spindle Taper: BT40 Toolchanger: 12 station carousel Toolchange Time: 8 seconds Max Tool Diameter: 100 mm Max Tool Weight: 7 kg Coolant Tank Capacity: 105 L Ballscrew: Grade C3, 28 mm dia P8 AC Digital Servo Motors: X = 8 Nm, Y = 8 Nm Max Torque Z Axis: 12 Nm, 3,000 rpm Machine Weight: 2,400 kg Footprint: 1,890 × 1,982 × 2,700 mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79114 Machine Serial Number: SMB0146 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.