Used Wood Wool Machine for sale (66,233)

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000042824, We are offering for sale a very well-maintained Biesse BREMA EKO 2.2 machine from 2021. The machine includes tool changing, two drilling units, and a set of tools. Software: bSolid. Ksdpfx Aozcrfpsbfedn The machine has been serviced by our technician, so we are very familiar with its condition and history. The machine can be tested at our showroom in Brno.

Condition: excellent (used), functionality: fully functional, CUTTING , TRIMMING SAW machine for solid wood model MZ PROJECT LC 4000 automatic machine second hand machine CE regulation: YES Ksdpfxezdqxcs Abfedn end-cutting of boards using a motorized rear roller conveyor with automatic stop and an idle front roller conveyor lengthwise cutting of solid wood planks and panels mm.4000 . depth: mm.1500 with automatic pusher (CN). Maximum cutting width: mm.1500 conditions of use: Excellent. maximum cutting length: mm.4000 motor power: Hp 15 total weight: kg. 3.000 volts: 380/50

Condition: used, Year of construction: 2016, machine/vehicle number: 7405_408, functionality: fully functional, operating hours: 788 h, HOLZ-HER Evolution 7405 White Edition CNC Machining Center For sale is a very well-maintained HOLZ-HER Evolution 7405 White Edition, year of manufacture 2016. The machine is in excellent technical and visual condition and can be demonstrated under power. A particular highlight is the exceptionally low processing time: only 788 hours with active feed. The machine was professionally serviced and completely recalibrated by the manufacturer in 2021. Since then, it has seen only limited use and runs smoothly, precisely, and reliably. Technical Data Manufacturer: HOLZ-HER Model: Evolution 7405 White Edition Year of manufacture: 2016 Serial number: 7405_408 Software / Controls CAMPUS Version: 6.4.4.2 NC-Hops Version: 6.6.2.207 Operating Hours Active feed / Processing hours: only 788 h Machine ON: 6,723 h Features 4-MAT configuration Drilling unit with 15 spindles Saw and grooving unit Milling unit with 6-position tool changer Handheld control device Vertical and horizontal processing Vacuum clamping system Ideally suited for: Furniture production Interior fittings Kitchen construction Joineries CNC entry or capacity expansion Condition Very well-maintained overall condition Regularly serviced Professionally recalibrated by the manufacturer in 2021 Minimal use since recalibration Immediately ready for operation Runs very cleanly and precisely No known technical defects Machine can be inspected and tested during operation Availability Available from calendar week 25 / 2026 Inspection possible by appointment Support with loading and transport organization available Price Asking price: €43,900 net Kodpfey Sicxjx Abfodn

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 7,810 h, input current: 43 A, input frequency: 50 Hz, type of input current: three-phase, workpiece weight (max.): 2,804 kg, number of axes: 3, number of slots in tool magazine: 6, actuation type: electric, overall weight: 2,804 kg, number of tool turrets: 31, Equipment: CE marking, documentation/manual, type plate available, For sale is a Morbidelli Drilling Center with low operating hours – the machine is connected and ready for trials and tests. MORBIDELLI CX210 CNC Drilling Center R00169 MORBIDELLI CX210 TECHNICAL DATA Min./max. workpiece length mm 200/3,050 Min./max. workpiece width mm 50/1,300 Min./max. workpiece thickness mm 8/95 Max. traverse rate in the X-axis m/min 40 Max. workpiece weight kg 70 Max. traverse rates in the X-Y-Z axes m/min 70-40-30 F31LTC DRILLING HEAD Number of vertical spindles pcs. 21 Number of horizontal spindles in the X-axis pcs. 6 Number of horizontal spindles in the Y-axis pcs. 4 Motor power kW 2.2 Spindle speed rpm 4,500 (option 3,000 – 8,000) Kedpjzdfhasfx Abfedn Fixed integrated saw in the X-axis, diameter mm 125 Max. saw blade thickness mm 6 Saw blade speed rpm 5,500 (option 3,600 – 9,700) INSTALLATION Compressed air consumption Nl/cycle 80 Dust extraction air requirement m3/h 3,300 Dust extraction air velocity m/s 25 Dust extraction nozzle diameters mm 200 + 80 Electrical protection kVA 19 Key advantages: -HSK63F milling head 6.6KW -Cutting saw -31 L drilling head -Infeed and work roller table -2 clamps instead of 1 pc. Speed 70 m/min Spindle + 6-position magazine

Condition: used, Year of construction: 2000, machine/vehicle number: AA1/11510, functionality: fully functional, operating hours: 19,250 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,080 mm, workpiece width (max.): 1,200 mm, number of axes: 3, number of slots in tool magazine: 12, total height: 2,346 mm, overall weight: 4,000 kg, Equipment: CE marking, documentation/manual, We are offering this used SCM Record 130 machining center, year of manufacture 2000. Equipped with a more powerful vacuum pump (2050 m³/h), vector rotary axis, angle gearbox adjustable from 0 to 100 degrees (HSK63), drilling unit with 9 spindles, and low operating hours. If you have any questions or require further information, please feel free to send us a message or call us. Kdsdpfjyzadrsx Abfsn

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. Kodpfx Abjwyda Usfsdn • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: excellent (used), Balestrini linear milling machine Kodpfx Abjvt Aynsfsdn Two milling units Milling height max 100mm Milling length max 1500mm Work on copiers Two feed speeds 4 pneumatic material clamps Milling unit motor power 2x4kw

Condition: new, Year of construction: 2026, WOOD SHAVINGS MACHINE KÄLIN Hobeltechnik, mod. MPC-P • Quantity of fresh shavings by hour: 3.800 Kg/hour Kedpfx Ajvk Saxobfodn • Measures logs box: 2.800mm x 1100mm x 1.300mm • Max. log input length: 2.650mm • 2 removables symmetrical cutterheads. Lenght 1.140mm. Each one in 3 pieces of: - Diameter: 200mm - Length: 380mm - Number of knifes: 8 - Sharpening full cutterheads, without removing knifes!! • 2 extra removables symmetrical cutterheads, for replacement during sharpening. Super fast cutterheads change patented system!! • Power of the cutting heads: 90 kW/120 HP • Feeding speed controlled by ELECTRONICAL INVERTER: 6 to 36 m/min • Automatic control of the forward-charge ratio of the machine • Power of the feed motor: 15 kW/20 HP • Control System of the material level inside the logs box, to avoid working without logs • Cabinet and control panel. Touch screem to control the machine • Motorized conveyor belt for the wood shavings. 800mm x 5.000mm • Weight: 11.000 Kg • CE

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors Kedpfxju R Sxxj Abfodn and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: excellent (used), Catalogue number 7321 Kedpfxsy Tkhxo Abfedn TECHNICAL DATA - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES – Italian-made – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary according to larger exchange rate fluctuations)

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Ksdpfx Ajy Uydlsbfjdn

Year of construction: 2021, condition: new, functionality: fully functional, A used one is for sale Felder Milling machine F-900 Z with tenoning and slotting table length 1300mm Kdodjy Iyvnopfx Abfsn The machine is inot used at all and therefore in mint (new) condition. Technical data: - 5 milling speeds - Milling spindle swivels 90° - 45° - Milling stop for tools up to Ø 230mm - Multi-adjustment system - Tapping and slotting table 1300mm - electrically height-adjustable + swiveling "PowerDrive" - Engine power 7,3kW SD start

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Kjdpfoy Iwf Hsx Abfedn Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: - Built-in rotary table - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000028110, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 2,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 900 mm, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, For sale: Premium vertical CNC machining center. The machine was purchased new; we are the first and only owners, ensuring a clear maintenance and usage history. The machine is in fully operational condition, exceptionally well maintained, and requires no further investment. - Working range x/y/z: 2600-900-60 mm Kedpsy Sfw Esfx Abfjdn - Working head with BH17 drilling head (10 horizontal and 6 vertical drills) - Speed up to 65 m/min - BSolid control - Automatic dimension reading via laser

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, spindle speed (min.): 18,000 rpm, spindle speed (max.): 2,800 rpm, mount diameter: 300 mm, feed length Y-axis: 1,800 mm, Two-station CNC lathe – Efficiency, precision and productivity in the processing of cylindrical parts The CNC lathe with 2 working units and numerical control is a modern solution for the processing of wooden parts with a cylindrical shape – such as columns, table legs or decorative elements – offering accuracy, repeatability and efficiency in any workshop or factory. Double performance with independent units Equipped with two working units that operate simultaneously or independently, the lathe allows the rapid processing of parts up to 1200 mm. It is ideal for the series production of furniture components, church elements or artistic objects. Kdodowhbguepfx Abfen Solid construction for durability The welded frame made of rectangular profiles, heat-treated, provides stability and torsion resistance. Linear guides on the X, Y and Z axes ensure precise, vibration-free movement. Precision through numerical control Hybrid servomotors, together with the rack and pinion system, guarantee precise positioning and efficient control on all axes. The manually adjustable tailstock with four clamping points stabilizes the parts during complex operations. Advanced motors and cooling Water-cooled motors allow operation at speeds of up to 18,000 rpm without overheating, ensuring a constant work rate and an extended service life. Intelligent DSP control The DSP control unit with internal memory allows for quick file import, project resumption from the stopping point and real-time parameter adjustment – ideal for a continuous and efficient production flow. Precision and maintenance auxiliary systems Self-centering chucks firmly fix the parts, while optical sensors and an automatic lubrication system ensure precision and low maintenance. Key advantages Perfect repeatability, even for large production runs Flexibility in operation with independent work units Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality and adaptability in woodworking, making it the ideal choice for modern workshops or furniture factories that aim to optimize production processes. Maximum working length 1200 mm Maximum working diameter (Ø) 300 mm Number of work units 2 pcs Control DSP Workpiece rotation speed 0 – 2800 rpm Motor power 4.5 kW Mill speed 18000 rpm Inverter “BEST” inverter Drive motors Servo motors – Hybrid Maximum feed 50 mm/ s Accuracy 0.0125mm

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Kdodpfxexc Rmqe Abfjn Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: ST D2 002, saw blade diameter: 250 mm, overall weight: 2,850 kg, cutting width (max.): 450 mm, Two-spindle multi-saw wood cutting machine JL32 Good working condition Max. 10 circular saw blades on the spindle, diameter 250mm x 70mm Kdodpfey E Snqjx Abfjn Main spindle dimensions: diameter 70mm, length 420mm Feed rate (cutting): 5-25 m/min Machine dimensions: length 2200mm, width 1500mm, height 1900mm Machine weight: 2850kg Voltage: 380V Main motor power: 30kW and 22kW (2950 min-1) Feed motor power: 0.75kW and 0.75kW (900 min-1)

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 221/2-306, functionality: fully functional, operating hours: 207 h, type of input current: three-phase, travel distance X-axis: 3,200 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 70 mm, workpiece length (max.): 1,000 mm, number of axes: 3, number of slots in tool magazine: 4, total height: 2,500 mm, total length: 1,500 mm, total width: 2,500 mm, overall weight: 3,000 kg, Equipment: CE marking, documentation/manual, HOLZ-HER EVOLUTION 7402 4MAT – Vertical CNC Machining Center Year of manufacture: 2023 Operating hours: 207 h Availability: Immediately High-performance industrial vertical CNC machining center suitable for milling furniture carcasses and other components from wood and laminated panels. Key Features - Vertical machining with highly accurate vacuum positioning system (including complimentary vacuum pads) - Rear clamping for processing all edges of the workpiece, enabling complete machining without repositioning - Laser length measurement system - Air-conditioned control cabinet - Uninterruptible power supply for computer unit Technical Specifications - Working length: 200–3200 mm - Working height (Y): 70–920 mm - Panel thickness: 8–70 mm - Maximum speed: - Vector: 68 m/min - Per axis: X 25 – Y 60 – Z 20 m/min Machining Unit - 10.3 kW electrospindle (air-cooled) - HSK-F63 tool holder - 4-position tool magazine - XL boring unit – 19 drilling spindles (13 vertical, 6 horizontal) - Groove saw in Y-direction Software and Control - Complete CAMPUS V7 EVOLUTION CAD/CAM software - Included modules: NC-HOPS, aCADemy, MT-Manager, Workcenter, Scenes Kodpfx Abjy Eygnefsdn - Integrated 3D simulation - Intuitive programming and advanced machining management - Remote control console - USB port - Wifi Equipment - ECO vacuum system (8 m³/h)

Condition: new, Year of construction: 2026, HOT AIR GENERATORS by wood model FABBRI F28 - F55CV - F85CV - F120CV - F240CV NEW machines in prompt delivery NEW PRICE LIST year 2026 WHILE STOCK IS STILL AVAILABLE I CAN GUARANTEE PRICE LIST year 2024 Super discount while stocks last 100% made in ITALY for heating sheds, warehouses, work and private environments Fuels: Wood - Chips - Paper - Cardboard CE marks: Yes volt. 220 single-phase ( model F28 and F55CV ) volt. 380 ( model F85CV - F120CV - F240CV ) CV models are equipped with an additional fan for smoke expulsion at the base of the flue model available : F28 . surface to be heated up to m2 100/150 F55CV . surface to be heated up to m2 300/350 F85CV . surface to be heated up to m2 450/500 F120CV . surface to be heated up to m2 650/700 F240CV . surface to be heated up to m2 1000 Hot Air Generators are suitable for the combustion of wood and all solid fuels allowed by law Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic suspensions driven by one or more electric motors. Electric command and control panel - adjusting thermostat. Kdsdpfjf H Hlrex Abfen Maintenance: Ordinary maintenance means the removal of the deposited ashes by opening the door. Once or twice a year, perform a general cleaning of pipes.

Condition: new, Year of construction: 2026, operating hours: 24 h, functionality: fully functional, machine/vehicle number: AVB-HELIX100ST4, total length: 6,500 mm, total width: 2,600 mm, total height: 3,500 mm, height adjustment type: mechanical, overall weight: 16,000 kg, compressed air connection: 8 bar, shaft diameter: 260 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, infeed height: 800 mm, control cabinet width: 600 mm, control cabinet length: 2,200 mm, control cabinet height: 2,000 mm, working length: 3,000 mm, workpiece width (max.): 800 mm, empty load weight: 16,000 kg, workpiece length (max.): 3,000 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 3,000 rpm, FEATURES OF THE WOOD SHAVING MACHINES  Bin size: 3000 mm  Hopper is equipped with the Speed Control System  The robust machine frame structure of single-piece steel construction  Heavy body structure against vibration caused by long-term use of the machine  Conveyor extraction: 1000 mm wide outfeed provided with a rubber band or PVC 4 mm thickness  Direct motor operation with an independent control panel with a digital screen, Kjdpfogmbtqex Abfsdn  PLC-controlled electric panel independent from the machine, minimum 5-6 meters away from the machine,  Can be operated with 380V 50-60 Hz (additional transformers can be added for foreign countries operating at different voltages, optional)  Adjustable knife heights and cutter heads  Possibility to adjust shavings thickness between 0,4 and 1,2 mm(for straight blade models)  Blades and speed can be varied to produce Large Flakes (Equestrian), Small Flakes (Poultry Layers), Fine flakes (Poultry Broilers)  To avoid downtime, a few sets of spare blades should be ordered together with each machine.  Shavings outlet: Gravity discharge from the cutter heads to the belt conveyor  easy cutter head blade adjustment system;  All cutter head blocks are moved out on the machine during the blade changing.  We are also supported by our customers with blade purchasing,  All parts used in our machines are CE certified and selected with the high-efficiency principle  Knives T.C.T. Carbide 14*14*2,0 mm CERATIZIT Made in EU, bearings COC, motors use the highest quality Turkish or imported products (WEG, SIEMENS, optional).  Automatic lubrication system for the whole machine's essential parts  All machines will be CE standards  The hydraulic system will work with the proportional valve.  Double-armed hydraulic system for the extra power of heavy-duty work  Control panel designed with Mitsubishi Electric, AB (Allen Bradley), Siemens, Schneider, or ABB  Modem Ethernet connection for the main company  The wood shaving machine output will be on the right side or the left side  digital display screen for control in one touch  All blades Diamond 14*14 mm or 15*15 mm, 500 pcs long-life blades  Directly mounted to the cutter head for all-electric motors to prevent losing power  Specially produced spiral helix mobile roller system with a T.C.T. carbide knife (first and only in Turkey)  Separate the control panel and the user interface panel TECHNICAL SPECIFICATIONS Number of Cutterheads 4 Length of Cutter Head 100 cm Number of Blades 500 Carbide/cutter head Power Supply 4 *37 KW = 148 KW (198,5 HP) Hopper Working Stationery Hopper Dimensions mm 3100*1200*1000 Working Voltage 380 V-400V-460V-560V 50-60 Hz Conveyor Band Motor 0,75 KW Hydraulic Motor 22-30 KW Total Power 181 KW Cutterhead Speed 2800 rpm Cutterhead Diameter 230 mm Shaving Depth 0,03 mm - 0,05 mm Max.Log Input Length 150-300 cm Max.Log Input Width 10-90 cm Working Distance 2200 mm Machine Dimensions L6450 x H3014 x W2514 mm Weight 17.000 Kg Production capacity: 4.500-5.000 kg/h

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 1000017221, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, controller model: BSuite3, number of spindles: 17, TECHNICAL DETAILS Working area X-axis: 2,500 mm Working area Y-axis: 900 mm Working area Z-axis: 60 mm Number of axes: 3 Tool: ISO 30 Spindles Total number of spindles: 17 6 vertical in X-axis 5 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Kdjdpfx Abeyzpcdofsn MACHINE DETAILS Numerical control: BSolid Software - BSuite3 EQUIPMENT Automatic unloading device Integrated blade for groove insertion Front protective and safety systems with mats Perimetric protective grids External reference: MME002

Condition: used, Year of construction: 1997, functionality: fully functional, total width: 1,240 mm, total length: 2,630 mm, total height: 1,400 mm, power of feed motor: 1,500 W, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 1997 - DTR - CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm Kdodpfx Aov N Edbebfjn - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW - 3 toothed pulling rollers - 4-knife head - 3 smooth pulling output rollers - dimensions L/W/H: 2630x1240x1400mm - weight: 1600kg

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 1,600 kg, working range: 140 mm, type of input current: three-phase, input voltage: 400 V, - Polish production - year of production 2005 - DTR, CE TECHNICAL DATA: - range of diameters of processed dowels: 40-140mm - max. diameter of input material: 200mm - min. length of input material: 600mm - max. allowance for processing per side: 30mm - cutter head drive motor: 18.5kW - forward/reverse feed - feed motor: 1.5kW Kdjdpfx Aev N Ebaebfsn - 3 toothed pulling rollers - head: 4-knife - 3 smooth pulling output rollers - dimensions length/width/height: 2630x1240x1400mm - weight: 1600kg

Year of construction: 2002, condition: ready for operation (used), General Data Machine weight 4300 kg Movement X-Axis Movement 3860 mm Z-Axis Movement 185 mm Y-Axis Movement 1793 mm Main Drive Number of axis 3 Spindle Speed 24000 RPM Kdsdpfx Ajx D Inzjbfsn Spindle motor power 17 kW This 3-axis Weeke CE OPTIMAT BHC VENTURE 3 was manufactured in 2002. It features a powerful 17 kW main motor and a maximum spindle speed of 24,000 rpm. The working field measures 3250 × 1250 × 1215 mm, with a rapid traverse speed of 100/50/20 m/min. Ideal for diverse CNC woodworking tasks, it also requires 7 bar of compressed air and has a dust extraction capacity of 3170 m³/h. Contact us for more information about this machine. Application Types CNC Wood Machining

Year of construction: 2020, condition: ready for operation (used), Main Drive Spindle motor power 13.2 kW Spindle Speed 24000 RPM Number of axis 3 Movement X-Axis Movement 3765 mm Ksdpfx Abex Nr Npsfodn Z-Axis Movement 378 mm Y-Axis Movement 1560 mm This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5" LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining