Used Pdl 3000 for sale (4,879)

Condition: used, Year of construction: 1986, functionality: fully functional, Hydraulic CNC plate shear Fischer DHS 10 / 3000 Maximum cutting length / sheet width: 3,000 mm Maximum sheet thickness, normal steel: 10 mm Maximum sheet thickness, stainless steel / V2A: approx. 6 mm Control: CNC-controlled back gauge Machine weight: approx. 7.5 to 9.0 tons Lredpfx Aozl Twqsftjp Installation dimensions L x W x H: approx. 3.80 m x 2.20 m x 2.00 m

Condition: used, Year of construction: 1963, Technical details: turning diameter over bed: 1000 mm turning diameter over support: 620 mm turning length: 3150 mm centre distance: 3150 mm turning diameter in the gap: 1200 mm length of gap: 800 mm Lsdpju Ix Arefx Afterp weight of the machine ca.: 11,5 t dimension machine approx.LxWxH: 7,5 x 1,5 x 1,7 m incl. 2x steady rests and various tips *

Condition: used, functionality: fully functional, Year of construction: 2016, load capacity: 3,000 kg, Four-way side loader Condition: Ready for use and fully functional Technical condition: good Lrodpfx Afeu Acuzotsp Description: Little-used spreader for Combilift CB2500 and CB3000, two units available – one for the 135 cm and one for the 175 cm fork carrier.

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Control Simatec OP7 stroke 450 mm back stop - adjustable 2000 mm Lrodpfeyk Dicox Aftop work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized rear stop, 1000 mm - Hydraulic upper beam adjustment - Motorized lower beam adjustment - Hydraulic tool clamping - Side guard - Foot switch - Operator's manual

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Item No. 24215 Technical data: - max. working width 3040 mm Ljdotpnldepfx Afterp - max. material thickness 4 mm - manual adjustment of cutting angle - stroke rate up to 34 1/min - rear stop with positioning control Pos100, 750 mm - front angle stop - 2 front support arms - rear guard with light barrier - electric foot switch - pneumatic connection 6 bar - power supply 400 V - space required without support arms approx. W 4000 x H 1400 x D 2100 mm - weight approx. 4700 kg

Condition: like new (used), Year of construction: 2008, operating hours: 150 h, functionality: fully functional, overall weight: 50 kg, fuel type: gasoline, tank capacity: 15 l, color: blue, power: 2.8 kW (3.81 HP), output current: 10 A, output voltage: 230 V, output frequency: 50 Hz, nominal power: 2.5 kW (3.40 HP), motor manufacturer: Honda, type of cooling: air, Professional 230 V petrol generator with AVR voltage regulation, delivering 2.5 kW (10.9 A) continuous and 3.0 kW (13 A) maximum output. Powered by a reliable 4-stroke OHV engine with recoil start. Fully serviced, starts easily and runs perfectly. Ideal for construction sites, workshops, emergency backup power and outdoor use. Made in Germany. Ready to work. Lrodpfx Afezl D Eljtep

Condition: good (used), Clamping plate with T-slots, plate panel, welding table, T-slot plate, clamping plate, scribing/marking plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: T-slot plate with solid base frame -Length: 3030 mm -Width: 3000 mm -Groove width: 25 mm Lodpfoza Sxwsx Aftsrp -Dimensions: see photos -Overall dimensions: 3030/3000/H500 mm -Weight: 4500 kg

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel Lrodpfszi Sd Dsx Aftep suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm top hold down belt adjustable speed mechanical lid oil circulation pump oil level control suitable fire protection sediment removal system filter lifting unit with mechanical hoists total length ± 5.650 mm total width ± 1.800 mm total height ± 3.450 mm

Condition: as good as new (ex-display), BORING AND MILLING MACHINE BFZ 3000 for the cost-effective production of profiles and long parts Lsdpfx Aozlyr Ioftjrp made of steel, stainless steel and aluminum Demonstration machine, year of manufacture 2018 Control system: Siemens SINUMERIK 808 D Advanced max. working area x-axis 3,000 mm max. working area y-axis 260 mm max. working area z-axis 300 mm Tool holder: BT 30 Spindle speed: 4,000 rpm at i=2 (various gear ratios possible) Spindle drive power: 7.5 kW Spindle torque: 48 Nm at 40% duty cycle Rapid traverse: 40,000 mm/min Drilling capacity in S355: 26 mm Threading capacity in S355: M16 Milling capacity in S355, 40% duty cycle: 200 cm³/min Repeatability: +/- 0.05 Workpiece support height: 850 mm Space requirement L x W x H: 6,000 x 1,600 x 2,400 mm Total weight: approx. 3,500 kg Tool changer: 11-position max. tool diameter: 80 mm max. tool length: 160 mm max. tool weight: 4 kg Connections: max. electrical power: 12 kW Slow-blow fuse: 32 A Compressed air: 6 bar Minimum quantity lubrication, 3 pcs. mechanical-hydraulic vises Inspection possible by appointment.

Condition: ready for operation (used), Suitable for twist-off caps Suitable for screw caps Capacity: up to 30,000 caps per hour Lredpey A Tk Iofx Aftjp Magnetic elevator belt

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, Simple laser tube cutting – reliable, versatile, and profitable. Economical laser cutting of tubes up to 170 mm outer diameter, even with low utilization rates. Whether you want to insource quality, manufacture in a more flexible and faster manner, or tap into new customers and markets: the TruLaser Tube 3000 is your machine, and thanks to its easy operation, it is also ideal for beginners or as an additional machine. Included: Tube support (raw material) with automatically retractable tube supports Solid-state laser TruFiber 3001 Machine bed for 6.5 m raw material length Unloading station for 3 m finished part length (including scrap container) LoadMaster Tube for 6.5 m raw material length (including bundle trough) for automated loading Optional extensions: Machine bed for 8.0 m raw material length for loading and unloading Technology packages for bevel cutting, Rapid Cut, and reduction of spatter adhesion (Spatter Guard) Lrsdjzi Rc Espfx Aftop Weld seam detection (SeamLine) inside and outside Highly innovative and user-friendly TRUMPF programming with Programming Tube Service: Installation, commissioning, training 12 months warranty Remote service agreement in the first year TRUMPF quality Our fast remote service support takes care of your needs worldwide. For further technical data, please refer to the data sheet or visit our website. If you have any questions, please do not hesitate to contact us. About TRUMPF: In our company’s history of over 100 years, we have been involved in the design and implementation of many thousands of sheet metal fabrication projects, particularly in Germany. We pass on this experience to our customers every day. With innovative machines and functions, the most comprehensive service concept on the market, as well as experts in software, automation, and smart factories, you will always receive a customized offer that is tailored to your requirements. P.S.: We will also be happy to support you with financing. With the financing, leasing, or pay-per-use models of TRUMPF Financial Services, we are there to assist you with both financial and entrepreneurial challenges.

Condition: new, 0 ja Working width 3000 (3500) mm 0 ja Ruchser RU-BM-3000 (option: 3500) Wing assembly table ----- Herstellerbeschreibung: Item 1.0 Article 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of working platform manually adjustable. Usable width 2500 mm Holder for hardware shears or hardware punch. 10 swivel-mounted pendants for hanging the sashes, completely pneumatically foldable for unhindered movement of the sashes on the table surface. Device for scanning the sash fitting length for constant and variable/centered handle fit and any handle fit height for pre-drilled sashes, colour-coded dimension recognition for the fittings. Pendulum height can be set to 50 or 60 mm on one stop. RU-SH, special screwdriver with pneumatic depth cut-off mounted on carriage, safety control, pneumatic height adjustment, screw feeder with automatic switch-off of the filling container Lredpfx Afst Tq Aastjp manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4 commuter rail manually adjustable in depth against left and right one 4-fold turret stop each. PSF - Pneumatic clamping device for sashes against the lateral stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, sliding or brush strips should be used as a support. Item 1.1 Article 6315 RU-BM-... adjusted to customer's fitting specification Item 1.2 Article 0500000 Holder adjusted to customer punching press/ shear For mounting a customer-supplied punching press or shear (other manufacturer) on the sash assembly table. Please specify make when ordering !!! ----- Price RU-BM-3000 in the above version ex works: on request! ----- Fitting bearing options for RU-BM-3000: ----- Version with fixed fitting bearing: Price EUR 5.468,00 Article 0630000 RU-BL-30/30 Fixed fitting storage unit Mounted above the leaf assembly table Length 3100 mm, depth 1250 mm, with 3 shelves with 10 compartments each, divided by partitions. Freestanding version: Price EUR 6.017,00 Item 0710000 RU-SBL3000/30 Freestanding storage unit, Length 3100 mm, depth 1250 mm, height 2050 mm, upright frame on the front without supports, 30 compartments, 10 in a row, each divided by partitions and a continuous shelf at the top, size of the compartments: width 280 mm, height 150 mm 4 pcs. Angle supports for corner deflections: Price 609,00 EUR Side length 120x120mm; inclination approx. 3° The front edge of the angles is bent up 5mm to prevent accidental unloading. 2 pieces on the left and 2 pieces on the right under the first shelf of the fitting. ----- Surcharge for RU-BM-3500 ----- Article 0610300 RU-BM-3500 Sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver length 3500 mm, width 1400 mm, inclination of working platform manually ble width approx. 3000 mm Surcharge RU-BM 3500 to RU-BM 3000: EUR 2,811.00 Fitting bearing for RU-BM-3500 (only free-standing possible): Price EUR 6,665.00 Item 0710007 RU-SBL3800/36, free-standing fitting storage Length 3800 mm, depth 1280 mm, height 2060 mm...

Condition: used, Year of construction: 2013, functionality: fully functional, spindle bore: 105 mm, turning diameter: 800 mm, turning length: 3,000 mm, quill stroke: 240 mm, quill diameter: 100 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 7 rpm, bed width: 600 mm, overall weight: 5,500 kg, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 2 m/min, workpiece weight (max.): 2,000 kg, IMTI SDM 800/3000 – USED HEAVY-DUTY LATHE An IMTI SDM 800/3000, manufactured in 2013, from a company liquidation. Originally an exhibition/demonstration machine in our showroom, sold to the previous owner in 2016. Inspection on-site or via video call is possible at any time. KEY FEATURES - Conventional guide and lead screw heavy-duty lathe, center distance 3,000 mm - Multifix quick-change tool holder with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm - 3-axis digital display SINO SDS6-3V TECHNICAL DATA - Swing over bed: 800 mm - Swing over cross slide: 1,000 mm - Swing over carriage: 480 mm - Center distance: 3,000 mm - Bed width: 600 mm - Spindle bore: 105 mm, spindle nose DIN 55027 size 11 Lsdozi Dhbjpfx Afterp - Spindle taper: Ø 120 mm, taper 1:20 - Spindle speeds: 7-720 rpm - Thread cutting: metric 1-240 mm (52 steps), inch 1-14 (26 steps), module 0.5-120 mm (53 steps) - Longitudinal feed 0.1-24.3 mm/rev, cross feed 0.05-12.5 mm/rev - Rapid traverse longitudinal/cross: 4,000 / 2,000 mm/min - Tool toolbit cross-section: 50 x 50 mm - Cross slide travel: 420 mm, top slide: 200 mm - Tailstock quill Ø 100 mm, taper MK 6, stroke 240 mm - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Main motor: 11 kW, rapid traverse motor: 1.1 kW - Workpiece weight between centers: max. 2 t, in chuck: max. 500 kg - Total weight: approx. 5,500 kg STANDARD EQUIPMENT - Multifix quick-change tool holder size D1 with 4 tool holders - 4-jaw faceplate Ø 800 mm, 3-jaw chuck Ø 500 mm incl. chuck flanges 350/500 mm - 3-axis digital display SINO SDS6-3V - Fixed rest Ø 20-200 mm, traveling rest Ø 20-100 mm - Complete coolant system - Fixed center, drive plate, change gears - Electrical end stop longitudinal, halogen machine lamp - German and English technical documentation incl. CE declaration of conformity - 400 V, 50 Hz, 3-phase CONDITION Used machine, manufactured in 2013, from a company liquidation. Sold “as is”, no warranty. Inspection on-site or via video call is highly recommended. OUR SERVICE Online or on-site factory visit, transport organized upon request, assembly, commissioning and operator training by our service technicians, direct German-speaking contact for spare parts and support, member of the FDM, the trade association for wholesale trade in machines and tools. Since this is a single item, subject to prior sale. Please call or write to us, and we will arrange an inspection appointment as soon as possible.

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump Lrjdpszi Ddpsfx Aftep level control adjustable speed infeed conveyor outfeed conveyor sediment removal system lifting unit with mechanical hoists suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: used, Part suitable for: trucks Price: Upon request VAT/differential tax: VAT deductible Ljdpfx Afozltddjterp Part number: 6520084515

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Lrodoyapdqepfx Aftop Weight: 8T Equipped with new tooling

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Lredpfx Asxgfbqeftop

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Lodpfx Aszlnn Rsfterp Additional information - Distance between table and press beam: 1,800 mm

Condition: excellent (used), functionality: fully functional, The FDS 3000-1 Trio is an automatic fish skinning machine designed for the gentle skinning of soft, trimmed whitefish fillets and fish portions of uneven thickness. This brand’s machine has been used for years in fish processing plants around the world as a proven solution where high yield and minimal damage to the raw material are essential. Technical Specifications Manufacturer: TRIO Model: FDS 3000-1 Capacity: 40–120 fillets/min (depending on fillet size) Skinning depth: 0–10 mm Feeding method: manual Skinning method: freezing the fillet on a chilled drum; operates without stretching the skin or flesh Supported species: including hake, pollock, blue whiting, and whitefish of varying thicknesses How does the Trio FDS 3000-1 skinning machine work? The operating principle of the FDS 3000-1 is based on a unique method of “freezing” the fillet on a chilled drum. The fillet is manually fed onto the surface of the rotating drum, where—thanks to the low temperature, the force of gravity, and light pressure—it is stabilized in a flat position without compressing or excessively straining the tissue. Only in this position does the knife remove the skin, leaving as much valuable meat as possible. This method allows for shallow, controlled skinning—with a cutting depth ranging from 0 to 10 mm—which results in less discoloration, fewer skin residues on the fillet, and higher end-product yield compared to the brand’s traditional, older models. Lrjdpfezlhihsx Aftsp Key Advantages of the Trio FDS 3000-1 The FDS 3000-1 skinner is particularly effective when the raw material is delicate or has uneven thickness—the gentle skinning method on a cold drum reduces the risk of fillet damage and preserves its structure even when processing thawed, previously frozen products. The machine’s capacity, ranging from 40 to 120 fillets per minute depending on the size of the raw material, allows the operating speed to be adjusted to the characteristics of a specific production line. The machine’s design ensures stable, consistent skinning quality regardless of the fillet’s shape and thickness, which reduces the need for manual adjustments and speeds up subsequent processing stages. The simple, manual method of feeding fillets means that operating the machine does not require extensive staff training. Applications and supported fish species The Trio FDS 3000-1 is used for skinning soft white fish fillets and portions of uneven thickness, including previously frozen and thawed raw material. The machine is well-suited for processing species such as hake, pollock, blue whiting, and other white fish that require gentle handling during processing. Thanks to its flexibility in skinning depth, the FDS 3000-1 is suitable both for producing fillets intended for further processing (e.g., breading, freezing, smoking) and for production lines focused on maximizing the yield of high-value raw material. At BMG Trade, we specialize in the sale of machinery for the food industry, including professional fish-processing equipment such as Trio skinning machines. If you are looking for a Trio FDS 3000-1 skinning machine—whether new or a proven, used machine in good working condition—please contact us. We will help you select the right model for your product range and production scale, and we will also advise you on transportation, service, and commissioning the machine at your facility. Contact us to find out about current availability and pricing for the Trio FDS 3000-1.

Year of construction: 2007, condition: used, functionality: fully functional, DANTHERM NFZ 3000 (Year 2007) Reliable and high-capacity dust extraction (air filtration) unit for sale, suitable for woodworking, furniture manufacturing, and other industrial applications. Technical Specifications: Filter area: approx. 150 m² Model: NFZ 3000 Year of manufacture: 2007 Collection bags: 6 pcs. Fans: 3 pcs. (3 sections) Airflow capacity: approx. 9,000 m³/h Inlet connection: Ø 630 mm Dimensions: Length: 3,600 mm Width: 2,400 mm (+ approx. 1,000 mm fan overhang) Height: 5,400 mm Lredpfx Afozlgm Eetsp The unit is designed for efficient collection of dust and wood shavings and is suitable for a wide range of industrial production facilities. It features a robust construction and is easy to maintain. Condition: Used (fully operational) Price: Negotiable

Condition: used, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (max. 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O interfaces: 2 digital inputs, 2 programmable relay outputs Column recognition: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostated microvalves with low dispersion (10 ports or 6 ports) Flow splitter: Nano, capillary, or thermostated micro-flow splitter with flow splitter identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and backpressure Column flow range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow range selection: 50 nL/min to 1,000 nL/min (using a Nano-LC splitter) 0.5 μL/min to 10 μL/min (using a capillary LC splitter) 10 μL/min to 160 μL/min (using a micro-LC splitter) Gradient delay time: Typically 600 nm. Noise: At a wavelength: Lrodpfx Aszikcxoftsp

Condition: excellent (used), Trumpf Type: TruMark 3000 Laser Marking Station Lsdpfx Afjziiuyetjrp Wavelength: 1064 nm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: good (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 3170, control type: manual, actuation type: electric, working width: 3,000 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, Only aluminum sheets, predominantly with a thickness of 2 mm, were used. The machine was used infrequently. Lsdpfxezk Ihne Afterp

Condition: ready for operation (used), Year of construction: 1969, Spindle bore diameter: 80 mm Lrsdpfxozh Ibps Aftjp Bore: 15 mm Stroke: approx. 550 mm Overhang: 250 mm Table size: 300 x 370 mm Table cut-out: 85 mm Space requirement: 1000 x 800 x 2000 mm

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor Lrsdpsxxig Usfx Aftjp *