Used Ksm 3000 for sale (5,161)

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2026, overall weight: 3,500 kg, input frequency: 50 Hz, Equipment: documentation/manual, Hello, we are offering a Thieme 3000 SL screen printing machine that has been completely and thoroughly overhauled in our workshop. Knedpfx Anjzyc Risuec The maximum printing format of this 3/4 automatic machine is 4000 mm x 1500 mm! The machine features a large, very robust vacuum table (with two vacuum pumps) on which the printing material is positioned against stops. After the printing process, the material is picked up by a gripper and placed onto an underlying conveyor belt. The conveyor belt can be mounted on either the left or right side, depending on the local conditions. The system has the patented Thieme squeegee system with three printing cylinders and two flood cylinders. Control is via a Mitsubishi E600 display. The system was completely disassembled and reassembled in our workshop. All wear parts and maintenance parts have been replaced. The control cabinet has been powder-coated. The side panels have been replaced with robust HPL panels. All air hoses have been replaced, contactors have been reconditioned, bearing bushings have been replaced, etc. The system is assembled and located in our warehouse in 93476 Blaibach and can be viewed/tested there while powered and connected to an air supply. We can gladly handle transport and on-site assembly. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction port: 120 mm Motor power: 3 kW Machine length: 1910 mm Machine width: 840 mm Weight: 330 kg Ksdpfxozq Dczs Anujnc

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Ready for removal Sealing bar is 250mm wide Kjdpfey Rvfqox Anujnc See video attached Price € 7,500 We can organise shipping / delivery for you.

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Upon request, a perforated table of any size can be supplied. Kodpsz Hvl Refx Anujnc 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1700x950x1260 mm Weight 400 kg Total power requirement 3,5 kw Knodpfevz Hlqjx Anuec

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1680x930x1200 mm Kedpfjvz Hn Sjx Anuonc Weight 350 kg Total power requirement 3,5 kw

Condition: new, Bernardo Edge Sander KSM 3000 C with Veneer Sanding Attachment Technical Specifications Work table 960 x 350 mm Table height adjustment 210 mm Belt length 3000 mm Belt width 150 mm Sanding belt backing 1060 x 200 mm Sanding head swivels 90° - 45° Belt speed 20 m/s Additional table 330 x 330 mm Oscillation stroke 20 mm Oscillation motor 0.25 kW (0.34 hp) Dust extraction connection Ø 120 mm Motor output S1 100% 3.0 kW (4.0 hp) Motor input S6 40% 4.5 kW (6.0 hp) Voltage 400 V Ksdpfjd N Tdmox Anuonc Machine dimensions (W x D x H) 1910 x 840 x 1020 mm Weight approx. 330 kg Scope of delivery Sanding belt 3000 x 150 mm - K100 Sanding belt oscillation Veneer sanding attachment Additional table Graphite coating Miter fence Sanding platen Dust extraction hose Features • Heavy-duty machine stand in a torsion-resistant and vibration-free design, extremely stable • Serrated infeed fence, ideal for sanding veneer overhangs • Double-sided dust extraction connection 80 / 100 mm for optimal chip extraction • Oscillating sanding belt ensures high material removal and a clean sanding finish • Maintenance-free sanding belt oscillation with separate gear motor, can be switched on as desired • Height-adjustable sanding table for utilizing the entire sanding belt • Standard veneer edge sanding attachment with fine adjustment • Quick changeover from veneer to solid wood sanding possible • Height adjustment of the work table or swiveling of the sanding head is done via handwheels • Spring-loaded belt tension, resulting in automatic compensation for belt length differences • Height-adjustable additional table with dust extraction for sanding radii

Condition: excellent (used), For sale: Professional industrial extraction unit by TEKA, model STRONGMASTER BIA, designed for welding fume extraction and air pollution control. ‼️ VERY LOW HOURS – ONLY 1,550 OPERATING HOURS (this is rare for this type of equipment) ⚙️ Technical specifications: Manufacturer: TEKA (Germany) Model: STRONGMASTER BIA Capacity: 3,000 m³/h Max. negative pressure: 2,500 Pa Motor power: 1.1 kW Power supply: 400V (3PH + N + PE) Frequency: 50 Hz Rated current: 2.5 A Protection class: IP54 Control voltage: 24V Weight: approx. 130 kg 🔧 Equipment: Flexible extraction arm Industrial filter Control panel Operating hours counter Mobile chassis with wheels 🔍 Condition: Knedpfxsz Smqkj Anujc Used equipment, in good technical condition. Normal signs of use visible. ✅ Low hours – only 1,550h ➡️ Equipment is only lightly used ➡️ Significant potential for further operation

Condition: repair required (used), For sale at a favorable price: Please send us your price offers. Mattress production line for overhaul or dismantling. Manufacturer: KSM, approximately 25-30 years old. Knsdpfo Aba Ncex Anuec The system is aging and requires a thorough overhaul; otherwise, it is functional. It has only been used infrequently by us. However, it is also interesting as a source of spare parts for dismantling. Control system with Lenze frequency inverters, Siemens PLC, conveyor belts, many motors, sensors, metal, aluminum profiles, needle grippers, etc. Consisting of: Gantry: Plate feeder with needle gripper (for automatically placing individual foam plates onto an alignment station with a conveyor belt). Roller adhesive application system (here, the foam plates are passed through on the conveyor belt and adhesive is applied by rollers). Padding carrier feeder with needle gripper (for automatically placing padding carriers (felt) onto the foam plates that have been wetted with adhesive). Adhesive tunnel with adjustable nozzles (here, the pre-assembled plates are sprayed with adhesive on the conveyor belt to allow the frame to be glued). After that, the material can be removed from the conveyor belt to assemble the mattresses. Several hundred mattresses per shift are possible. The system will only be sold as a whole. Dismantling and transport must be handled by the buyer. (EXW)

Condition: new, Machine stand in a torsion- and vibration-free design, extremely stable. Grinding unit adjustable up to 45° using a handwheel. Kjdpfsvrvctsx Anuenc Grinding belt oscillation with separate gear motor. Height-adjustable grinding table to utilize the entire belt width. Standard veneer edge grinding device with fine adjustment, contact shoe, relief rollers and stops. Height-adjustable additional table with suction for grinding radii. With spring-loaded belt tension. With table extension and feed console. 100% Made in EU (developed, built, quality tested) Technical data: Table size 960 x 350 mm Table height adjustment 230 mm Belt length 3000 mm Belt width 200 mm Belt speed 20 m/sec Oscillation stroke 20 mm Oscillation motor power 0.25 kW Main motor output 3.8 kW S6 400V (3 kW S1) Weight 400 kg Optional equipment: Miter stop

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Container rotating device, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Speed continuously adjustable, 80 to 1600 mm/min. Diameter 40mm to 1400mm Roller diameter 200mm Kjdjgu Edyepfx Anusnc L: 800 x W: 370 x H: 450 Model or color variations possible.

Condition: used, functionality: fully functional, Year of construction: 2011, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 7 bar, We are offering this used TRUMPF TruMatic 3000 laser cutting machine, manufactured in 2011. Maximum cutting force: 165 kN Laser power: W Knedpfx Ans Aaxt Rsuec Machine number: A0111A0021 Year of manufacture: 2011 Mains voltage: 400 V Mains frequency: 50 Hz Connected load: 18 kVA Control voltage: 24 V Required fuse rating: 3 × 35 A Compressed air connection: 7 ± 1 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1973, travel distance X-axis: 850 mm, travel distance Z-axis: 2,900 mm, controller manufacturer: SIEMENS, number of axes: 2, Turn-mill centre manufactured in 1973. This MAX MULLER 3000 / Norma 2900 x 850 features a turning length between centers of approximately 2850 mm and a faceplate diameter of Ø 630 mm. It is equipped with a SIEMENS CNC Control and has a drive power of 32 kW. If you are looking to get high-quality turning capabilities, consider the MAX MULLER 3000 / Norma 2900 x 850 machine we have for sale. Contact us for further details. Kedpfj Adp Tvjx Anuenc - Turning Length between Centers: Approx. 2850 mm- Faceplate Diameter: Ø 630 mm- Drive Power: 32 kW- Operating Hours: Approx. 60,000h - 70,000h (mathematically calculated after 1998 retrofit)- Control Unit: SIEMENS CNC Control- Additional Accessories / Scope of Delivery: Complete machine, 1x hydraulic steady rest (Ø 50 mm - Ø 150 mm), faceplate Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, functionality: fully functional, Year of construction: 2007, Plate bending machine: Birlik KSM 1280X1 plate bending machine type: KSM year of manufacture: 2007 bending length: 1300 bending capacity: 1mm roller diameter: 2x90mm, 1x50mm cone bending equipment mains voltage: 400v 50Hz 0.75kw foot pedal operation. Currently, a gear motor with a higher speed than the standard is installed. machine length: 1900mm machine width: 550mm height: 1300mm weight: 300 kg high-strength rollers according to SAE 1050 certificate Kedpjw Ty Dujfx Anusnc

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TECHNICAL DETAILS General Information Model: TruLaser Cell 3000 Machine type: highly dynamic and precise CNC laser machine Machine bed: polymer concrete Axis concept: cantilever system Travel ranges and axes Travel ranges X/Y/Z: 800 × 600 × 400 mm X/Y axes: linear motors Measuring system: direct, absolute measuring system Z axis: linear guides and ball screw drive Kodsz R Dz Aspfx Anujnc Control and operation Control system: TRUMPF based on Siemens Sinumerik 840D sl Operation: panel PC for process monitoring Cooling and electrical system Control cabinet: integrated Water cooler: water-air Laser unit Laser unit: TruFiber 400 (G2) Laser type: single-mode fiber laser Application area: welding and cutting Laser power: 400 W at the fiber end Beam quality M²: 1.1 Fiber optic cable: 6 m LLK-B Operating mode: CW / modulated Modulation frequency: max. 50 kHz Pilot laser: standard Coil feeder Manufacturer: TRUMPF Design: for strip material Material length: max. 800 mm Material thickness: 0.1–1.9 mm Material width: 40–250 mm Width adjustment: by handwheel Pneumatic coil feed: 50 mm stroke, right EQUIPMENT Tensioning and guiding module for coil material Guided workpiece removal, selectable as box or funnel system Pneumatic coil feed Coil feed control Panel PC for process monitoring Integrated control cabinet Water-air cooler Commissioning and training

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 828D - ShopTurn, _____ Description: Year of manuf. : 2023 Knedpfx Aj Aau T Hjnuec Control : Siemens 828D - ShopTurn Turning diam. : 405 mm Turning length : 956 mm Main Spindle: Technology:Belt-driven spindle Speed (max.):3,000 rpm Power (max.):26 kW Bar capacity:91 mm Workpiece clamping:3-jaw chuck, SAMCHULLY HS-12 Tool holder: Technology:12-station turret Tool holder:BMT65 Tool drive:5,000 rpm Travel in X/Y/Z:215/-/560 Main Spindle: Technology:Trailed tailstock Stroke:100 mm Quill diameter:110 mm Taper:MT5 Main Spindle: Chip Management:Chip Conveyor Coolant Management:IKZ Pump with Oil Skimmer and High Pressure, 10 bar Tool Measurement:Automatic Measuring Arm Automation:Prepared Finished Part Removal:Part Catcher with Collection Box Setup Mode:Electronic Handwheel

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output Kjdpfx Asz Rl Hysnuonc - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: good (used), Year of construction: 1994, pressing force: 100 t, throat depth: 360 mm, clearance between the columns: 2,600 mm, Make: Gasparini Model: PSG 100 Year of manufacture: 1994 Type: Press brakes Knjdpfj Aa Dc Djx Anuoc Control: CNC Controller: upgraded DELEM DA-65R controller Crowning: yes (hydraulic crowning) Press force (tons): 100 tons Working width (mm): 3000 mm Distance between columns (mm): 2600 mm Throat depth (mm): 360 mm Back gauge stroke (mm): 650 mm Power (kW): 7.5 kW Dimensions L x W x H (mm): 3500 x 1550 x 2600 mm Machine weight (kg): 9000 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. Knsdsz Iww Rjpfx Anujc The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: used, Year of construction: 2020, operating hours: 80 h, machine/vehicle number: pr5-3000-08200667, type of cooling: water, Equipment: documentation/manual, Swift-Cut Pro 3000 plasma cutting table. I have not personally operated this machine. The machine is in very good condition. It has been used for very few hours, and I would rate its condition as close to new. The set includes a Hypertherm Powermax 105 power source. Sold without warranty or guarantee. Kodpfx Anjz Ixzkouonc

Condition: ready for operation (used), functionality: fully functional, JUTEC Type 3000 with profile bending attachment PB 20 -CE marking -Bending capacity / flat steel 100x8mm -Bending capacity / round material 20mm -Digital angle bending adjustment / display -Material stop -Drive: electromechanical -Control: digital -6 rpm (bending roller) -Tool holder / hexagon 40mm -Foot switch -Documentation Kodpfx Ajz S Afpenuonc Dimensions: L x W x H 0.8 x 0.7 x 1.5 meters / Weight approx. 85 kg Errors and omissions excepted.

Condition: used, Year of construction: 2022, functionality: fully functional, A GEA decanter CF 3000, year of manufacture 2022, is available for sale at our location in 55569 Monzingen. The decanter is used and has minor signs of wear. Kjdoz I S R Sopfx Anuonc Currently, the decanter is still connected to the power supply and can be inspected by appointment. If you are interested, we will gladly send you a data sheet with detailed information about the system upon request. Dismantling, loading, and transport are the responsibility of the buyer.

Condition: ready for operation (used), Year of construction: 2012, punching force: 18 t, sheet thickness (max.): 6 mm, CNC punching machine manufactured in 2012. This TRUMPF TruPunch 3000 features a punching force of 18 tons and a maximum sheet thickness of 6.4 mm. The working area measures 3,000 x 1,500 mm, making it suitable for various applications. If you are looking to get high-quality punching capabilities, consider the TRUMPF TruPunch 3000 machine we have for sale. Contact us for further details. • Working area: 3,000 x 1,500 mm Knedsz Szglepfx Anujc • Configuration: Stand-alone • Condition: Fully functional • Tooling: Not included • Reason for sale: Seller is switching to a laser combination machine • Note: Sold without tooling

Condition: excellent (used), Year of construction: 2016, clamping force: 3,000 kN, Equipment: documentation/manual, Clamping force: 300 t Screw diameter: 60 mm Shot weight: 510g/PS Min Mould: 400mm Kjdpfx Aoz R Rfvjnusnc Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Type: Horizontal Drive: Hydraulic 2 hydraulic Cores Arburg Robot Multilift Conveyor

Condition: excellent (used), Year of construction: 2017, clamping force: 3,000 kN, Equipment: documentation/manual, Clamping force: 300 t Screw diameter: 55 mm Shot weight: 510 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Platen size: 1040x1040 mm Shot volume: 558 cm3 Mould min: 400 mm Type: Horizontal Drive: Hydraulic 2 core pullers Linear robot Tecnomatic compact Kjdpfx Ajz R Rggenuenc conveyor