Used Okuma Lu 25 for sale (228)

Condition: used, Year of construction: 1995, turning diameter 150 mm turning length 1250 mm control OSP 7000 L total power requirement 37 kW weight of the machine ca. 8500 t Bjdpfx Aksyi Hwtsnjlp

Condition: used, Rated voltage: 400V, phases: 3, frequency: 50Hz, max. power consumption: 57.9kVA, total current consumption: approx. 83.8A, max. motor current consumption: 94A, current interruption at: 10kA, connected load: 47.8kVA, control: Okuma OSP-U100L, an on-site inspection is possible. Bodpfxez E Nq Rj Aknolp

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, CNC turning center Okuma LU 45 M -3000 Control: OSP-P200L Year of manufacture: 2009 Internal machine number: 81 Max. turning diameter: 660 mm Max. turning length: 3,000 mm Spindle bore: Ø 260 mm Spindle speed: 2,800 rpm Travel distances: X-axis: 420 mm Z-axis: 3,025 mm Blsdpfoz Rl H Hjx Aknop Spindle power: 30 kW Accessories - Chip conveyor - Tool turret with 12 stations - Tools

Condition: used, Year of construction: 1988, functionality: unexamined, machine/vehicle number: 0210.07382, turning length: 1,000 mm, turning diameter: 350 mm, spindle speed (max.): 3,000 rpm, chuck outer diameter: 315 mm, The Okuma LB 25 is a used CNC inclined-bed lathe, manufactured in 1988, equipped with an Okuma OSP 5020 control. According to the documentation we have, it can handle workpieces up to 1,000 mm in length and has an integrated Okuma Touch Setter. The machine comes with a chip conveyor and oil mist extraction system. It is located in the Düsseldorf area, along with an Okuma LB 15 from 1987. TECHNICAL DATA - Year of manufacture: 1988 - Control: Okuma OSP 5020 - Turning length: 1,000 mm - Turning diameter according to documentation: 350 mm (please verify on the nameplate before purchase) - Chuck diameter according to documentation: 315 mm - Spindle speed max.: 3,000 rpm - Measuring device: Okuma Touch Setter (integrated) EQUIPMENT AND ACCESSORIES - Chip conveyor Knoll 320 S-1 with coolant cleaning - Extraction system Filtermist F21/8 - Tool turret with holders (as shown in the photos) Bedpfx Aez H Ugyeknslp - Turning and clamping tools CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For shafts and turned parts up to 1 m in length, suitable for maintenance and contract manufacturing. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. Disassembly, loading, and transport are organized by the buyer. Upon request, we can provide contact information for freight forwarders in the region. Price upon request. Please contact us via the contact form.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CNC turning machine Okuma LU 3000 EX-M2SC 1000 Control system: OSP-P300LA Year of manufacture: 2022 Internal machine number: 66 Turning length: 1,000 mm Bjdpjzwl Aiofx Aknjlp Turning diameter: 340 mm Spindle speed: 5 - 5,000 rpm Tool shank: VDI 40 2 tool turrets A-turret: 12 tool positions / all positions powered B-turret: 8 tool positions - Tailstock - Hinged-belt chip conveyor - 3-jaw chuck Kitagawa B-212 Z220, bore in the chuck Ø 91 mm - Touch setter - One Touch IGF - Handwheel on the control panel - Tool monitoring system - Reinforced coolant pump, 8 bar

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0154, One of my clients is looking to sell his Okuma LB25-M lathe with powered tools, as he prefers to use Mazak machines in the future. Blsdpfxs Afpp Hs Aknop - Machine: Okuma LB25-M - Equipment: Powered tools - Condition: Good - Status: Still in production - Price: €25,000 - Location: Weyerbusch near Altenkirchen, Germany The machine can be inspected on site by appointment.

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Blodpfx Akoztctqsnop Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Width: 3609mm Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2008, CNC lathe Okuma LU35-M-2ST-600 Control system: OSP-P200L Year of manufacture: 2008 Internal machine number: 25 Bledpfjyliqujx Aknop Max. turning diameter: 550 mm Max. turning length: 600 mm Bore diameter of spindle: 90 mm Spindle speed: 3,200 rpm Main spindle: 30 kW A-turret: 12 stations (all powered) B-turret: 10 stations Tool holder: VDI 50 Accessories Chuck Kitagawa N15 Chip conveyor Interlit Including external coolant system Door automation Touch setter

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of manufacture: 2007 Internal machine no.: 26 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm 2 tool turrets A turret: 12 tool positions (live tooling) B turret: 8 tool positions Bsdpfx Aksyyk I Eonelp Equipment: Tailstock Transformer Touch setter Chip conveyor OneTouch IGF

Condition: used, Year of construction: 2023, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 500 mm, turning diameter: 410 mm, spindle bore: 80 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 510 mm, spindle motor power: 22,000 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 5,000 rpm, total height: 2,145 mm, total length: 3,272 mm, total width: 2,619 mm, quill stroke: 150 mm, overall weight: 6,800 kg, swing diameter over bed slide: 580 mm, Equipment: documentation/manual, We offer this used Okuma LB3000 EX II MY CNC lathe with ARMROID Automation. Year: 2023. Control: OSP-P300LA Excellent Clean Condition, fully operational and under power. Configuration: Single spindle CNC Turning Center with Armroid Robotic Arm. Main Spindle Seed: Up to 5,000 rpm Bodpfx Akezi Ihfsnelp Spindle Bore / Bar Capacity: 80mm Max Turning Diameter: 410mm Max Turning Length: 500mm Swing Over Bed: 580mm Turret: 12-station live tol turret Spindle Motor Power: 15 kW (20 HP) - (continuous) Y Axis Travel: 120mm (+70 * -50mm) Thermal Stabilization system (TAS for spindle and structure) to mitigate thermal expansion. Tail Stock Integrated Okuma robotic arm system for lights-out operation. Chip conveyor Regularly maintained and in excellent condition - last service September 2025 Byer is responsible for removal and delivery Machine can be used with or without robot loader as required making it very versatile

Condition: used, Year of construction: 2006, We are offering this used Okuma LU300-M CNC turning machine, manufactured in 2006. Manufacturer: Okuma Model: LU300-M Year of manufacture: 2006 Date of production: 11/2006 Serial number: 126842 Condition: used Machine category ID: 1182 Machine type ID: 190 Machine type: CNC turning machine Bedpfxoz Rwfuo Aknolp If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Max turning diam 530mm, max turning length 1,025mm Main spindle A2-8, 38-3,800Rpm, bore 80mm, 22 Kw. Chuck 210mm. Sub spindle A2-6, 5,000Rpm, bore 62mm, 22 Kw. Chuck 200mm. Bledszghc Djpfx Aknop X 475mm, Z 1,170mm, Y 160mm, B axis Capto C6, 200-6,000Rpm, cooling through spindle 30 bar. Index 1 dg. Lower turret 12 pos VDI 40. ATC 44 pos. SMW SLU2 hydraulic steady 12-110mm diam. Thermal heat compensation, type TAS-C. 45° B axis indexing for multitools. Helical machining. Tool wear offset function. Tool reteact function. Tool-Offset 200 pos. Control OSP-E100M. Absoscales XA / XB. Portal loader Fastem / Fanuc.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few operating hours. * Machine designed for high chip removal capacity. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. * Extremely rigid structure. * Oil-fed guide lubrication system with automatic machine shutdown. * Renishaw tool presetter. * BT 50 spindle taper. * 18.5 kW high-torque motor. * Cutting torque: 580 N/m. * Chip removal capacity: 540 cm/min. * Okuma IGF OSP300 automatic conversational programming system. Bodpfxe Ahna Ro Aknslp * Automatic force control and tool wear monitoring. * Parameterized automatic tool anti-collision system. * Communication ports via USB, PCMCIA card, and RS-232. * Tool life management and tool wear monitoring. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm. * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * Tool magazine capacity: 36 tools. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system with 70 bar pressure. * 30-micron particulate filter system. * LTA smoke filtration equipment. * Hinged rear chip extractors. * Machine currently in production. * Can be inspected by a certified Okuma technician. * Condition: like new. * Extensive set of BT 50 collets. * Electrical transformer, documentation, parts list, electrical schematics, and programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold immediately.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, Okuma LU15-MY Year of manufacture: 2001 Blodpozh Iwksfx Aknep Commissioned: 2002 Control system: U100L A video of the machine can be viewed on our website. Machine features: ▪ IGF dialog programming ▪ Movable tailstock ▪ Powered tools – 12 stations on the A-turret ▪ C-axis ▪ Y-axis ▪ Touch probe ▪ Preparation for steady rest on the B-turret ▪ Internal chuck ▪ Signal tower ▪ Mayfran chip conveyor Technical details: • Max. turning diameter: 340 mm • Max. turning length: 1000 mm • X-axis travel: upper 260 mm (170+90); lower 140 mm (90+50) • Z-axis travel: upper 1,040 mm; lower 1,015 mm • C-axis travel: 360° • Spindle – number of speed steps: 2 – automatic • Bore diameter: 62 mm • A-turret (upper): 12 tools, all suitable for M-tools, VDI 40 • B-turret (lower): 8 tools, VDI 40 • Rotating tool speed: 45~4500 min -1 • Rapid traverse feed rate: mm/min X: 15,000 Z: 20,000 C: 200 min -1 • Tailstock quill diameter: 90 mm • Tailstock quill stroke: approx. 100-120 mm ▪ Machine dimensions including chip conveyor L x W: approx. 4300 x 2200 mm ▪ Machine height: approx. 2230 mm ▪ Weight: approx. 7900 kg Optional: ▪ Transportation organization and execution ▪ Machine delivery and installation ▪ Machine commissioning

Condition: used, Year of construction: 2005, Technical details: max. turning diameter: 320 mm turning length: 1040 mm control: OSP E 100 L Onetouch IGF-M-D greates pass round over bed: 530 mm standard turning dia.: 350 Max. distance between centres: 1200 mm max. workpiecediameter: 525 mm Traverse X-Axis 1: 500 Traverse X-Axis 2: 350 mm Traverse Y-Axis 1: 160 (+80/-80) mm Traverse Z-Axis 1: 1200 mm Traverse Z-Axis 2: 1200 mm Spindle 1 Power: 22 kW Spindle 1 RPM: 3800 1/min spindle nose: JIS A2-8 spindle bore: 80 mm Bjdpfsz Ig Swjx Aknelp bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 4500 1/min Turret No.2 stations / rotary tools: 12/12 rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 25 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 6,0 x 2,5x 2,3 m High pressure coolant system: INterlit 8/20 bar Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck SMW 300 mm Soper solid CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets with a maximum of 24 positions for rotary toolholders. A comprehensive package of toolholders comes with the machine. An Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 5 identical machines available, all in very good and well maintained condition. *

Year of construction: 1998, condition: ready for operation (used), General Data Blodpfx Asx D R Rfeknep Measurements width 2620 mm Measurements depth 4865 mm Machine weight 11700 kg Control Unit Brand OKUMA Model n/a Main Drive Spindle speed range 3500 Tool taper ASA 8 Number of axis 2 Movement X-Axis Movement 230 mm Z-Axis Movement 670 mm Turret Tool taper VDI 40 This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Bljdpfstqu U Tsx Aknop Trimming machine

Condition: ready for operation (used), Year of construction: 1998, operating hours: 7,984 h, functionality: fully functional, machine/vehicle number: 1408, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, bar passage: 65 mm, controller model: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 340 mm Maximum turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-station turret Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Bljdpox Hx Dnjfx Aknep Tool Turret II (X/Z) Technology: 8-station turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Electrical connection data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Cutting time: 7,984 h Spindle run time: 8,674 h EQUIPMENT Chip conveyor Coolant pump Automatic measuring arm Transformer

Year of construction: 2018, condition: used, Control system Okuma OSP P300L (OSP Suite, 15") MACHINE Number of axes: 2 Max swing over bed: Ø670 mm Max swing over cross slide: Ø480 mm Max turning length: 1500 mm Max turning diameter: Ø480 mm SPINDLE Spindle diameter, front bearing: Ø140 mm Spindle bore: Ø91 mm Spindle nose: JIS A2-8 Speed range: 42–4200 rpm Front spindle bearings: Roller bearings, axial angular contact ball bearings Torque: 700 Nm Spindle material: CrMo X-AXIS Travel: 300 mm Rapid traverse: 25 m/min Z-AXIS Travel: 1590 mm Rapid traverse: 30 m/min TURRET Type: V12, NC turret Number of tools: 12 Indexing time: 0.24 s/station Tool mounting: MQ TAILSTOCK Quill diameter: Ø100 mm Stroke: 1530 mm Taper: MT No. 5 MOTORS Spindle motor: PREX 30/22 kW (30 min/cont.) Bledpfj Aa At Ijx Aknjp X-axis: BL 3.5 kW Z-axis: BL 4.6 kW MACHINE DIMENSIONS Height: approx. 2200 mm Floor space: approx. 4200 × 2400 mm Weight: approx. 8500 kg (standard machine) STANDARD EQUIPMENT - MQ turret, 12 stations (excl. tool holders) NC-controlled tailstock MT No. 5, live center MT No. 4 Coolant system with high-pressure pump Work light Fully enclosed chip and splash guard Chuck open/close via M-code and foot pedal ("double type") Manual Touch Setter Central lubrication (monitoring type B-1) Hand tools Built to IEC standard incl. CE marking and EMC - Conversational programming One Touch IGF-ME kit INCLUDED OPTIONS Spindle orientation Cutting load monitoring "Load monitor" for all axes and spindles Automatic door C1500, left + right Shower/flush coolant type B (M-code) Air blow for chuck and tailstock (quill) Hydraulic quill movement 60 mm, built-in quill MT No. 4 - Prepared extraction port - Absoscale for X- and Z-axis Turcuite for X- and Z-axis incl. "0.1 micron control" Steady rest SMW-Autoblok SLU-X 3.1 Ø20–165 mm with automatic tow-along positioning Grundfos pump 12 bar CR1-9 Cromar chip conveyor (hinged belt), chip discharge to the right

Condition: good (used), Year of construction: 2004, functionality: fully functional, turning length: 600 mm, turning diameter: 400 mm, spindle speed (min.): 3,800 rpm, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Okuma LU300MY, with E-100L control, A-turret V12 all driven VDI4-40 M-function for milling, B-turret V-8, tailstock, chip conveyor, coolant system 8 bar, MY function Y-axis, touch setter, approx. 15,500 spindle hours, built in 2004, good condition and fully functional, available immediately. Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. Bjdpfovta Nysx Aknelp We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 347 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, spindle motor power: 22,000 W, overall weight: 4,600 kg, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details. - Operating Hours: 521 hours- Spindle Running Time: 347 hours- Control Unit: OSP-P300LA-e / OSP P300L-R-TD Kit- Main Spindle Motor Power: 22 kW- Main Spindle Speed: 3,800 rpm- Chuck: 10" Hollow clamping chuck (250 mm) Type N210A8- Spindle Bore: 80 mm- Spindle Nose: A8- Turning Diameter (VDI Turret): 300 mm- Max. Turning Length (VDI Turret): 450 mm- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Range: 360° (0.001° resolution)- Rapid Feedrate (X / Z): 25,000 / 30,000 mm/min- Tool Turret: V12 Radial Turret with driven tool stations (VDI40)- Turret Stations: 12 (all 12 can be driven)- Driven Tools Power / Torque / Speed: 7 kW / 23.7 Nm / 4,500 rpm- Tailstock: NC Tailstock (MT5 taper, 5.0 kN thrust force)- Supply Voltage: 400 V- Phase: 3 P- Frequency: 50/60 Hz- Rated Capacity: 28.6 kVA- Full Load Current: 41.2 A- Largest Motor Rating: 96 A- Short Circuit Ratings: 2.5 kA- Machine Dimensions (without chip conveyor): 2,545 mm x 1,870 mm x 2,057 mm- Optional Equipment & Components: * V12 radial turret for milling function * Chip conveyor with side discharge * Grundfos high-pressure pump (0.8 kW) * Touch Setter M (Tool presetter) * Tool carrier VDI40 * Real 3D graphics simulation & One Touch IGF dialog programming * 1 set of soft jaws & 1 set of hard jaws * 3 pcs. Boring bar holders * 3 pcs. External turning holders * 2 pcs. Face turning holders * 8 pcs. Reduction sleeves (2x 16, 20, 25, 32 mm) * 1 pc. Reduction sleeve MK02 * Parts catcher (max. material dim. D51mm x 150mm, max. weight 2.3kg) * Bar feeder interface * Grippex bar gripper (40mm shank diameter, gripping range 3-60mm) * Hand wash gun set (incl. pump, spiral hose, switch) * Transformer Technical Specification Counter Spindle No Driven Tools Yes Bedpfs Aa Aufox Aknjlp

Condition: used, Year of construction: 2008, operating hours: 18,349 h, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, Produced in 2008, cutting time 18,349 h, OSP P200L, 4-axis double turret VDI40, A-turret VDI40 V12 with live tools, B-turret VDI40 V8, turning diameter 340 mm, turning length 1000 mm, standard spindle bore, main spindle 4800 rpm, tailstock, manual, touchsetter, chip conveyor, coolant station, in good working and geometric condition, optional tools available. Bjdjyu N Uxjpfx Aknelp

Condition: ready for operation (used), Year of construction: 2008, operating hours: 18,349 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 340 mm, spindle speed (max.): 4,800 rpm, controller model: OSP P200L, Equipment: chip conveyor, TECHNICAL DETAILS Turning length: 1,000 mm Blodpfxsy Txyco Aknop Turning diameter: 340 mm Spindle speed (max.): 4,800 rpm Axes: 4 Tool turret A: VDI40 V12 with driven tools Tool turret B: VDI40 V8 MACHINE DETAILS Control system: OSP P200L Operating hours: 18,349 h EQUIPMENT Touch probe Chip conveyor Coolant station Standard spindle bore Tailstock: manual

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC turning machine Okuma LB 400-M Control system: OSP-E100L Year of manufacture: 2005 Internal machine number: 83 Turning length: 1,250 mm Turning diameter: 620 mm Blsdpfxj Ahm Ups Aknsp Spindle speed: 3,500 rpm Tool turret: 12 stations (powered) Tool holder: VDI 40 Spindle bore: approx. 110 mm 3-jaw chuck Kitagawa B15 Equipment: - Chip conveyor - Coolant system - Touch probe - Tailstock

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter: 350 mm, spindle bore: 62 mm, spindle speed (max.): 5,200 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Swinging diameter over cross slide: 370 mm Turning length: 1,000 mm Swinging diameter: 350 mm Blsdpfey S S Anjx Aknsp Spindle bore: 62 mm Spindle speed (max.): 5,200 rpm MACHINE DETAILS Coolant pump: 8 bar EQUIPMENT Documentation/Manual Speed infinitely adjustable A-turret VDI40, 12 stations (all powered) B-turret VDI40, 8 stations Touch setter for A & B turrets Tailstock, manual Chip conveyor Extraction system Bar feeder, Samsys Multi-3000