Used Okuma Lu 25 for sale (162)

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 4710 mm Hfsdpjxmbw Isfx Afisn Measurements depth 2700 mm Measurements height 2864 mm Machine weight 11500 kg Main Drive Spindle speed range 50 to 15000 Tool taper SK40 Number of axis 4 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 760 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 60 m/min Table Table load 500 kg Tools Max weight 10 kg Max tool diameter 70 / 150 mm Max tool length 300–450 mm This 4-axis Okuma MB 5000H was manufactured in 2011. It features a robust horizontal machining center design with a 500 × 500 mm pallet size, capable of handling a maximum load of 500 kg. The spindle supports speeds from 50 to 15,000 min⁻¹ with a SK40 taper, enhancing its versatility. Additional features include a chip conveyor, shower system, and provision for a Renishaw probe. If you are looking to get high-quality milling capabilities consider the Okuma MB 5000H machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2000, max. turning diameter 580 mm turning length 1500 mm control OSP 7000 L greates pass round over bed 610 mm swing diameter over slide rest 580 mm turning speed range - main spindle 12 - 2.800 min/-1 spindle bearing diameter 150 mm spindle bore 110 mm spindle nose JIS A2-11 power capacity - main spindel 37 (30) kW C-Axis 0,001 ° x-axis 598 mm y-axis 230 mm z-axis 1.660 mm rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U type H2 ATC number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 tool shank height 25 mm Boring bar shank diameter 50 mm diameter of quill 120 mm quill stroke 170 mm taper of center MT 5 number of toolpositions 50 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA Hfedpfx Aexmaf Rofisn weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,2 x 3,0 m CNC - Turning- and MillingCenter OKUMA - MacTurn 50

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, machine/vehicle number: 0329, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, nominal power (apparent): 19 kVA, controller manufacturer: OKUMA, controller model: OSP700M, total height: 2,700 mm, total length: 3,000 mm, total width: 2,320 mm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, OKUMA MX45 VAE Machining Center The machine is in good condition; however, a supply unit (electronic component) is currently defective. The machine can be inspected under power, but due to the defect, it does not operate (error present). Otherwise, the machine control is functional. The mechanical components are in perfect working order (e.g., spindle, ATC, etc.). Internal coolant supply (IKZ) is available. The machine was primarily used for machining aluminum parts. Hjdpfovyp Ncsx Afiefn Spindle taper: MAS BT40 Original documentation for the machine is available. The machine is offered for sale without clamping devices, tools, or tool holders. --- Loading --- Loading is not free of charge. However, we will assist you in organizing professional transport from the current installation site to the collecting truck.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, turning length: 280 mm, turning diameter: 270 mm, spindle bore: 62 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 75 rpm, total height: 1,610 mm, total length: 1,520 mm, total width: 1,630 mm, swing diameter over cross slide: 350 mm, turning diameter over bed slide: 450 mm, overall weight: 2,800 kg, number of tool stations in tool turret 1: 12, Okuma LCS-15 Hfjdpfoxm T Dyjx Afisn OSP 700L CNC controller Machine its in very good condition, almost not been i use.

Condition: not inspected (used), turning diameter / mm Hfsdpfx Aewz Ryqofien turning length / mm control / total power requirement / kW weight of the machine ca. / t required space / m Machine runs intermittently. Has a thermal problem. When it has been switched on for 2-3 hours and the electronics have warmed up, the machine can then be switched on and works without any problems. Feature Typical value / description Machine type CNC lathe (horizontal, 2-axis) Centre distance approx. 500–1000 mm Turning diameter over bed approx. 400–500 mm Turning diameter over carriage approx. 200–300 mm Spindle speed up to 3500 rpm (variable) Spindle bore approx. 50 mm Tailstock partially available, sometimes automated Tool turret 8 or 12 stations Drive AC servo motors, depending on version All information is provided without guarantee. This information is for guidance only. Further information is available on request.

Condition: used, Year of construction: 1990, Used 20 mm Cold Forming Machine Manufacturer: Asahi-Okuma (Japan) Year of manufacture: 1990 Model: AF-2020-5 Station No.: 5 Cutting diameter: Max. 20 mm (tensile strength below 70 kg/mm²) Cutting length: 210-15 mm Projection length: Punch side projection: Max. 52 mm Main die x depth: 115 mm diameter x 250 mm Punch die x depth: 85 mm diameter x 150 mm Cutting die x depth: 80 mm diameter x 80 mm Ejector die diameter: 30 mm diameter Cutting die diameter x thickness: 80 mm x 40 mm Die center distance: 140 mm Crank stroke: 380 mm Transfer stage length: 210 mm Head piece net diameter: 45 mm diameter. Punch net diameter: 100 mm diameter. Force: 250 tons Production capacity: 100 units/min (max.) Main motor: 75 kW (6/8/12 poles) Machine weight: 75 tons Hjdjxlac Hjpfx Afiefn Machine dimensions: 9.1 x 3.45 m

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements height 3280 mm Machine weight 24000 kg Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 1000 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Table Table load 1200 kg Tools Hsdpfjxmbxljx Afisfn Number of station 171 Type of tool holder HSK 100 This 4-axis Okuma MA 600H II was manufactured in 2019. It features a 630 × 630 mm table, capable of handling loads up to 1,200 kg, and a high-speed spindle up to 12,000 rpm. The machine offers rapid traverse rates of 60 m/min and a comprehensive tool magazine with 171 stations. If you are looking to get high-quality milling capabilities consider the Okuma MA 600H II machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), functionality: fully functional, spindle speed (max.): 6,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,150 mm, table length: 2,800 mm, table width: 1,500 mm, Equipment: rotational speed infinitely variable, X-axis: 3.000 mm Y-axis: 2.000 mm Z-axis: 1.150 mm Table size: 2.800 x 1.500 mm Spindle nose: ISO 50 Spindle speeds: 30 - 6.000 rpm ATC: 50 pockets CNC controller: OSP7000M Distance between columns: 2.050 mm Featured with: - Vertical milling head attachement - Touch probe - Double chip conveyor (recently renewed) - Cooling unit (recently renewed) Hfsdpsxixrbofx Afion - Machine manuals Country of origin: Japan Machine LxWxH: 9.000 x 3.500 x 3.500 mm +/- Machine weight: 27.500 kg

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation Hfedpfx Ajxmirgsfien - CE marking

Condition: good (used), Year of construction: 2010, functionality: fully functional, Manufacturer: Okuma Model: Multus B300-W CNC: OSP-P200L Year of manufacture: 2010 Hjdpfx Aexmg Sqofijfn X-axis: 580 mm Z-axis: 935 mm Y-axis: 160 mm C-axis: 360° (0.0001°) B-axis: H1 ATC turret, HSK 63, 6000 rpm, PREX 11/7.5 kW Spindle speed: 38–5000 rpm 40-position ATC Machine weight: 9982 kg Machine dimensions: L=4368.8 x W=2032 x H=2590.8 mm

Condition: used, Year of construction: 2006, operating hours: 4,382 h, functionality: fully functional, machine/vehicle number: 127611, turning diameter over cross slide: 340 mm, turning length: 480 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 1,500 W, Equipment: rotational speed infinitely variable, EQUIPMENT - Hydraulic tailstock - Bar feeder 1000 mm TECHNICAL DETAILS Swing diameter over bed: 530 mm Swing diameter over longitudinal slide: 530 mm Swing diameter over cross slide: 410 mm Turning length: 480 mm Turning diameter: 340 mm Spindle speed: 4,500 rpm Spindle Spindle nose type: JIS A2-6 Taper bore: Ø70 (2.75") x 1/10 mm Spindle bore: 62 mm Spindle speed range: 38 - 4,500 rpm Longitudinal slide (Z-axis) Travel: 500 mm Feed rate: 0.001 - 1,000 mm/rev Rapid traverse: 25,000 mm/min Cross slide (X-axis) Travel: 280 mm [70 + 210] Feed rate: 0.001 - 1,000 mm/rev Rapid traverse: 20,000 mm/min Turret Type: V12 Number of tools: 12 (turning or driven tools) Tool size (external turning tools): 25 x 25 mm Tool size (internal turning tools): 40 mm C-axis Control angle: 360° (increment: 0.001°) Rapid traverse: 200°/min Tailstock & Motors Tailstock quill diameter: 90 mm Tailstock quill travel: 120 mm Main spindle motor: 15/11 kW (20 min / continuous duty) Longitudinal feed motor (Z-axis): 6 kW Cross feed motor (X-axis): 4 kW MACHINE DETAILS Machine height: 2,200 mm Footprint: 2,200 x 1,720 mm Hjdpfx Afsxl Udrsijfn Weight: 5,200 kg EQUIPMENT - Hydraulic tailstock - Bar feeder 1000 mm

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Hfsdpfx Aowu I Irsfien Work area door:Automatic Set-up mode:Electronic handwheel

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements height 3280 mm Machine weight 24000 kg Main Drive Spindle speed range 12000 Tool taper HSK 100 Number of axis 4 Movement X-Axis Movement 1000 mm Hfsdpfxsxmbxxs Afijn X-Axis Rapid Traverse 60 m/min Y-Axis Movement 900 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 1000 mm Z-Axis Rapid Traverse 60 m/min Table Table load 1200 kg This 4-axis Okuma MA 600H II was manufactured in 2019, featuring a robust 630 × 630 mm table, capable of handling loads up to 1,200 kg. It boasts rapid traverse rates of 60 m/min and a high-speed spindle up to 12,000 rpm, ensuring efficient machining. The machine includes a large tool magazine with 171 stations and advanced features like spindle cooling and a chip conveyor system. If you are looking to get high-quality milling capabilities consider the Okuma MA 600H II machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 1998, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP -U 10M, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 32, Equipment: chip conveyor, Machine is well maintained and in good working order, tools included Hjdpfouqi A Hox Afiefn

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller OKUMA OSP P200-M Table size 1000 x 460 mm Table load 700 kgs X travel 762 mm Y travel 460 mm Z travel 460 mm Spindle speed 15000 rpm Tool holder type MAS BT40 ATC magazin 20-fold Weight 6500 kgs Dimensions LxWxH = 2750 x 2160 x 2715 mm Features, accessories Hodpfeuu Rwyex Afisfn - Chip conveyor - Coolant unit - Spindle cooler - CTS - Manuals Very good condition.It will be sold because of liquidation of production.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 0537, CNC: OSP-U100L X-axis: 1050 mm Y-axis: 560 mm Z-axis: 460 mm Hfodpfx Aexlta Eofien Table size: 1300 x 560 mm Number of tool pockets: 32 Spindle taper: BT50 Max spindle speed: 12,000 rpm Spindle motor power: 15 kW Machine dimensions: H=3200 x W=3000 x L=3400 mm Machine weight: 8,000 kg.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Hfjdpfxsxc Trco Afien Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements height 2864 mm Machine weight 11500 kg Main Drive Spindle speed range 50–15,000 Tool taper SK40 Number of axis 4 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 60 m/min Y-Axis Movement 760 mm Y-Axis Rapid Traverse 60 m/min Z-Axis Movement 760 mm Z-Axis Rapid Traverse 60 m/min Tools Max weight 10 kg Max tool diameter 70 mm / 150 mm Max tool length 300–450 mm Hodpsxmbwnefx Afiefn Type of tool holder BT40 This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand OKUMA Model OSP-P200L Main Drive Spindle speed range 38–5000 Spindle bore 100 mm Hedoxl Hz Njpfx Afiofn Number of axis 5 Movement X-Axis Movement 580 mm Y-Axis Movement ±80 mm Z-Axis Movement 935 mm W-Axis Movement 1000 mm Workpiece Workpiece drm over bed 630 mm This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turn-mill center with a swing over bed of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, toolsetter, and a tool magazine holding 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking to get high-quality turning capabilities consider the Okuma Multus B300-W machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 6850 kg Control Unit Brand OKUMA Model OSP-P300LA Main Drive Number of spindles 2 Spindle bore 120 mm Number of axis 5 Movement X-Axis Movement 260 mm Y-Axis Movement 115 mm W-Axis Movement 895 mm Workpiece Workpiece drm over bed 580 mm Workpiece drm over support 470 mm Turret Rotating tools Yes This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. Application Types Turning Hjdpfx Afoxl H Agoiefn

Condition: ready for operation (used), Year of construction: 2003, Control Unit Interface HSK 63 Brand OKUMA Hfsdpfx Ajxl H Hrjfien Model OSP-100L Main Drive Number of axis 5 Tools Number of index 40 Max tool length 1500 mm Additional Equipment Autodoor This 5-axis Okuma MacTurn 350 was manufactured in 2003. It features an HSK 63 tooling system and can accommodate up to 40 tools. The machine includes an autodoor and supports a turning length of 1500 mm. Consider the opportunity to buy this Okuma MacTurn 350 Turn-mill centre machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 1998, Control Unit Brand OKUMA Model OSP-7000M Main Drive Number of axis 4 Hodoxl H E Iopfx Afijfn Additional Equipment 4 pallets with tombstone This 4-axis Okuma MX-60HB horizontal machining center was manufactured in 1998. It features a BT 50, a 60-tool automatic tool changer, and 4 pallets with tombstone, enhancing productivity and versatility. Consider the opportunity to buy this Okuma MX-60HB horizontal machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 1999, Main Drive Number of axis 3 Movement X-Axis Movement 1050 mm Y-Axis Movement 560 mm Z-Axis Movement 460 mm Tools Type of tool holder BT50 This 3-axis Okuma MX-55VB was manufactured in 1999. It features BT50 tool holders and a tool measuring system. The machine has an X-axis travel of 1050 mm, Y-axis of 560 mm, and Z-axis of 460 mm. Complete documentation is available. If you are looking to get high-quality milling capabilities, consider the Okuma MX-55VB machine we have for sale. Contact us for more information about this machine. Application Types Milling Hodpfoxg Um Nex Afisfn

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model OSP-P300S-H Movement Y-Axis Movement 160 Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min Hfodpfx Afexg Umpoien SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 5400 mm Measurements depth 10500 mm Machine weight 27000 kg Hfodpfjxgv T Rex Afien Main Drive Spindle speed range 6000 rpm This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, it's ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine. Application Types Milling