Used Okuma Lr 15 M for sale (227)

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Gjdpfjwmdv Nox An Rsbl

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, controller manufacturer: OKUMA, number of axes: 4, This 4-axis Okuma LU15 M-2SC 1000 was manufactured in 1998. It features two tool turrets, live tooling with C-axis capabilities, and synchronous tapping for enhanced productivity. The machine includes an integrated tool setter for precise measurements and a programmable tailstock for versatility. If you are looking to get high-quality turning capabilities, consider the Okuma LU15 M-2SC 1000 horizontal turning machine we have for sale. Contact us for further details. • Longitudinal Travel (X): 1020 / 995 mm • Cross Travel (Z): 260 / 140 mm • Turning Range: 340 mm • Swing Diameter over Bed Cover: 530 mm • Swing Diameter over Cross Slide: 380 mm • Spindle Nose: ASA-A2 / DIN 55026 Gr. 6 • Spindle Bore: 62 mm • Spindle Diameter in Front Bearing: 100 mm • Chuck Diameter: 200 mm • Main Drive: Motor spindle (hollow shaft motor) frequency-regulated 60% ED Gsdpfx Anoy Nmi Dj Rjbl • Power (Main Drive): 22 kW • Max Torque: 412 Nm • Speed Range: 45 - 4,500 rpm • Speed Levels (Electrical): 2 • Feed Drive: AC servo motors, digitally regulated • Feed Range X/Z: 0 - 1,000 mm/U • Rapid Traverse X/Z: 15 / 20 m/min • Power X, Z: 2.4/1.5 kW and 4/4 kW • Feed Force X, Z: 11/3.7 kN and 7/6.7 kN • Turrets: 2 tool turrets • Live tooling: Yes (C-axis and driven units) • Tapping: Synchronous tapping • Spindle interpolation: Automatic main spindle interpolation • Tool monitoring: Wear and breakage monitoring • Tool measurement: Integrated tool setter / measuring device • Tailstock: Programmable, towable with bed slide, automatic clamping • Tailstock quill: Controllable via M-command • Draw tube bore: 55 mm (partial hollow clamping cylinder) • Interface: DNC Interface RS-232C • Cooling system: Reinforced pump (8 bar at 30 l/min) • Programming: ONE TOUCH Dialog-NC (automatic work plan generation) Additional equipment • Chip conveyor (1,200 mm discharge height) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1997, spindle speed (max.): 6,000 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 240 mm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis Okuma LB15i-M was manufactured in 1997. It features a spindle speed of up to 6000 rpm and a spindle power of approximately 15 kW. The machine includes 5 motorized front tools and 2 radial tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the Okuma LB15i-M horizontal turning machine we have for sale. Contact us for further details. • Turret positions: 12 Gedsywu Siopfx An Rsbl • Driven tools: Yes (5 front + 2 radial) • Tailstock: available (to be enabled) • Distance between centers: 500–1000 mm • Spindle nose: JIS A2-6 Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, 4 Axis Gbsdpfxsy Drunj An Rjl Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: excellent (used), functionality: fully functional, Commissioning: as Okuma stock machine 09.2017 Control OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor with 32 kW output Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustable range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-station tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinged belt chip conveyor: high-performance chip conveyor with low-maintenance self-cleaning function ▪ Drum sump filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools for the lower turret) ▪ Automatic door ▪ Robot interface type E for connecting other loading and unloading systems to single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50–4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2-stage Range switching at full speed ▪ Lower turret: 12 stations In ZB-axis with cylindrical roller guide In XB-axis with slide guide ▪ Real-time collision avoidance system CAS ▪ 19" color LCD TFT (1280x1024) with 3D color graphics as touchscreen/panel with vertical display and tiltable keyboard (adjustable angle) ▪ Second operating system Windows 7 for operation and data communication, open and freely usable for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations Gedpfx Asyviigen Rebl ▪ C-axis 360° Positioning in 0.001° steps ▪ Y-axis with travel +150/-150 = 300 mm ▪ B-axis 240° Positioning in 0.001° steps ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. pressure 20 bar Including bag filter, external cooling tool spindle, pump with max. pressure 3 bar ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement system (with standard chuck) for safe setup ▪ Machine management MacMan with integrated BDE (operating data acquisition) ▪ Parts program memory 2 GB ▪ Max. length individual part program 2 MB ▪ 2 USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed oscillation via periodic speed change ▪ Tool height correction in Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotating tools ▪ 10 workpiece zero points (coordinate system selection) ▪ Coordinate conversion (shift, rotate) ▪ Electronic spindle orientation + / - 0.1°

Condition: excellent (used), Year of construction: 2014, CNC Turning and Milling Center Okuma Multus U4000 2SW 1500 Control: OSP-P 300 S-H Year of manufacture: 2014 Spindle hours: approx. 2,050 h Travels: X-axis: 695 mm Y-axis travel: +150/-150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Spindle mounting: HSK 63 Total tool stations: 40 Gbsdeyk Tq Ajpfx An Rsl Accessories: XA and YA axes equipped with direct absolute measuring system (Okuma ABSO-Scale) In-process measurement with Renishaw probe for X/Z axes Measurement in Y-axis including angled axis measurement Kitagawa B215A11 max. 2,800 rpm Kitagawa B210A8 max. 4,200 rpm Kitagawa F 2596-H01 hollow chuck cylinder Ø96 mm One-Touch IGF Multi-function tool software Harmonic spindle speed vibration control Simultaneous 5-axis machining software package Chip conveyor Coolant tank with 70 bar high-pressure pump

Condition: excellent (used), Year of construction: 2014, CNC Turning and Milling Center Okuma Multus U4000 1SC 1500 BigBore Control: OSP-P 300S Year of manufacture: 2014 X-axis: 695 mm Y-axis travel: +150/-150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments Turning diameter: 650 mm Turning length: 1,500 mm Spindle interface: Capto C6 Total tool stations: 80 Equipment: - NC tailstock - Travelling hydraulic steady rest AX 5 on NC axis - Coolant system with band filter - Kitagawa BB 212-11 hydraulic 3-jaw chuck Gjdpsyk Ddgjfx An Rjbl - Automatic tool touch setter - High-pressure coolant system (IKZ) - Software option High Cut Pro (High-accuracy package with Super Nurbs) - CAS collision avoidance system - Main spindle orientation, electric - Multitool with turning function for Y-axis - Helix function - Automatic main power shut-off - DNC-DT interface - Machining Navi M-i (milling), speed control to minimize vibration - One-Touch IGF - Chip conveyor

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Gbodou U E Avepfx An Rsl Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: ready for operation (used), Okuma Opus 5000 II Main Board II A E4809-045-086-A / 1911-1509-44-90, serial number as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Gjdpfx Asi Eca Don Rsbl

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0014, turning length: 1,500 mm, turning diameter over cross slide: 610 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel Distances X-axis travel: 598 mm Y-axis travel: 230 mm Z-axis travel: 1,660 mm C-axis: 0.001 Turning Length: 1,500 mm Swing diameter over cross slide: 610 mm Swing diameter: 580 mm Spindle Spindle motor power: 30,000 W Spindle speed (min.): 14 rpm Spindle speed (max.): 3,200 rpm Spindle bore: 90 mm Spindle bearing diameter: 130 mm Spindle nose: JIS A2-11 Rapid Traverse Rapid traverse (Z-axis): 20 m/min Rapid traverse (X/Y): 12,000 mm/min Rapid traverse (C): 100 min^-1 Cutting feed rate X/Z/Y: 0.001 - 1,000 mm/rev Tools Tool magazine positions: 32 pos. Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Gbedpfsxqyiksx An Rjl Max. tool weight: 20 kg Turret type: H2 ATC Tool stations: 2 (1x L-Tool / 1x M-Tool) Driven tool stations: stepless Spindle speed – driven tool stations: 40 - 3,000 rpm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Centre taper: MT 5 MACHINE DETAILS CNC Control: OSP 7000L Total power requirement: 53 kVA Dimensions & Weight Dimensions (L x W x H): 5.3 x 3.2 x 3.0 m Machine weight: 18,500 kg EQUIPMENT Chip conveyor

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 Gbodeku Aaajpfx An Rjl X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, First put into operation 2001. Technical details: turning diameter 420 mm turning length 650 mm spindle bore 95 mm spindle turning speed range 2800 rpm travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Gbsdpfxeyzy Uks An Rel - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 380 mm, controller manufacturer: OKUMA, controller model: OSP‑P200LA‑R, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with driven tools, allowing for milling and drilling on the C-axis. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we have for sale. Contact us for further details. • Turning configuration: 2 axes (X, Z) + C‑axis; no Y‑axis • Tailstock: Equipped • Tool presetter: Automatic tool presetter installed • Turret: 12‑station turret with driven tools (milling and drilling on C‑axis) • Max. turning diameter: 200 mm • Spindle nose: ASA A2‑6 • Spindle bore diameter: approx. 50 mm • Electrical supply: 380 V, 3‑phase, 50/60 Hz • Average apparent power: 17.7 kVA • Full‑load current: 26.7 A • Max. motor current draw: 45 A Technical Specification Counter Spindle No Driven Tools No Gsdpfjy Rrwvex An Rjbl

Condition: ready for operation (used), Year of construction: 2014, operating hours: 23,723 h, spindle speed (max.): 3,800 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,140 mm, spindle motor power: 22,000 W, overall weight: 6,000 kg, controller manufacturer: OKUMA, controller model: OSP-P300, number of axes: 3, This 3-axis Okuma Genos L300 E-M was manufactured in 2014. It features a maximum turning diameter of 300 mm and a turning length of up to 1000 mm. The machine is equipped with a spindle speed of up to 3800 rpm and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300 E-M CNC lathe we have for sale. Contact us for further details. • Chuck size: 203 mm • Max. turning diameter: 300 mm • Max. turning length: 450–520 mm (up to 1000 mm optional) • Z-axis travel: 450–1140 mm • Spindle bore: 65 mm • Turret: 12 stations • Tool type/interface: VDI / BMT • C-axis: Yes Technical Specification Counter Spindle No Driven Tools Yes Gbsdpfx Ansy I Uu Ee Rel

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 4,500 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 11,000 W, total height: 1,569 mm, overall weight: 3,800 kg, controller manufacturer: OKUMA, controller model: OSP P200 L, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2010. It features a maximum turning diameter of 200 mm and a turning length of 380 mm. The machine is equipped with a spindle speed of 4,500 rpm and a main spindle power of 11 kW. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning machine we have for sale. Contact us for further details. • Max swing over covers: 450 mm • Max turning diameter: 200 mm • Max turning length: 380 mm • Spindle nose: ASA A2-6 • Front bearing diameter: 100 mm • Spindle bore: 62 mm • Bar capacity: 50 mm • Rapid traverse (X/Z): 20–25 m/min • Tailstock taper: MT No. 5 • Tailstock quill stroke: 100 mm • Turret type: VDI-30 V12 • Indexing time (1 position): 0.1 sec • OD tool size: 20 x 20 mm • ID tool size: 32 mm • Live tool speed: 6,000 rpm • Live tool power: 4.0 / 1.8 kW Gbsdjy A I Stepfx An Rsl • Floor space: 2.081 x 1.550 m • Total power on time: 23,498 hours • Operating time: 6,490 hours • Cutting time: 5,278 hours Additional equipment • Static tool holder kit included Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,200 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 920 mm, spindle motor power: 40,000 W, total height: 2,600 mm, total width: 2,600 mm, overall weight: 13,500 kg, product length (max.): 5,200 mm, number of slots in tool magazine: 22, number of axes: 4, This 4-axis Okuma LU35-M was manufactured in 2008. It features a maximum turning diameter of 550 mm and a Z-axis travel of 920 mm. The machine is equipped with two revolvers, offering a total of 22 tool stations, and operates at a spindle speed of 3200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LU35-M horizontal turning machine we have for sale. Contact us for further details. • Maintenance Contract: Yes • Utilization: 85% • Shifts: 2 • Number of Tools: 12 • Number of Revolvers/Magazines: 2 • Maximum Turning Diameter: 550 mm • Control System: OSP-P200L • Revolver A: 12 stations • Revolver B: 10 stations • Spindle Bore: 90 mm • Supply Voltage: 400 V • Phase: 3 • Frequency: 50 Hz • Rated Capacity: 53.1 kVA • Full Load Current: 76.7 A Gjdpfx Aey A Ibhsn Rjbl • Largest Motor Rating: 134 A • Interrupt Capacity: 10 kA • X-axis travel (A turret): 350 mm (corresponds to max Ø700 mm) • X-axis travel (B turret): 240 mm (corresponds to max Ø480 mm)OPTIONAL for an additional charge: around 100 x tools, Clamping elements, chuck jaw sets, 2-jaw chucks, zero-point clamping systemElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 50

Condition: used, Year of construction: 2019, machine/vehicle number: 0711-101349, Equipment: chip conveyor, CNC vertical machining center Gbedpfx Anoy Axf De Rol

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Godoyyk I Eopfx An Rjbl Year of manufacture: 2007 Internal machine no.: 26 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Swing diameter over carriage: 410 mm Spindle bore: 72 mm Spindle speed: 45 – 5,000 rpm 2 tool turrets A turret: 12 tool positions (live tooling) B turret: 8 tool positions Equipment: Tailstock Transformer Touch setter Chip conveyor OneTouch IGF

Condition: good (used), Parts shown by hand not come. Gbsdeyb R Erjpfx An Rsl

Condition: used, OKUMA LB 10 II M is a CNC turning lathe, engineered for precision, high accuracy and reliability. Capacities: swing over cross‑slide 340 mm, over bed 480 mm, max turning Ø 170 mm, spindle hole 51 mm, max length 300 mm, bar passage 42 mm; travels Z350/X150 mm; rapid Z20/X15 m/min. Turret 12 pos., 12 driven tools; C‑axis res. 0.01°; spindle 50–6000 t/min; voltage 3x400 V 50 Hz; weight ~3400 kg; footprint 2000×1640×1780 mm. Accessories: lamp, coolant system, bar feeder, chip conveyor. Enables tight tolerances; suitable for automotive, aerospace, medical, watchmaking and precision machine tool applications. Gsdpoyxnx Eefx An Rebl

Condition: used, OKUMA LB 200 M is a CNC turning lathe for high‑precision machining, accuracy and reliable operation. Capacities: turning Ø over cross‑slide 420 mm; swing over bed 530 mm; spindle hole 53 mm; max Ø 300 mm; travels Z 335 mm, X 180 mm. Specs: rapid traverse X 25 m/min, Z 30 m/min; spindle speeds 50–6000 t/min; 3x400 V 50 Hz; total power 16 kVA; weight ≈3300 kg; dims 2035×1720×1700 mm. Equipment: 12‑position fixed‑tool turret; tailstock Morse 4, spindle stroke 80 mm, Ø 55 mm. Enables tight tolerances; typical sectors: automotive, aerospace, medical, machine building. Gbsdpfx Aoyxnxxjn Rel

Condition: excellent (used), Year of construction: 2008, CNC Lathe Okuma LU35-M-2ST-600 Control: OSP-P200L Year of manufacture: 2008 Internal machine no.: 25 Max. turning diameter: 550 mm Max. turning length: 600 mm Spindle bore: 90 mm Spindle speed: 3,200 rpm Main spindle: 30 kW A turret: 12 stations (all driven) B turret: 10 stations Toolholder: VDI 50 Gbsdeyliqujpfx An Rjl Accessories Schunk chuck NC Rota 500 Interlit chip conveyor Including external coolant system Door automation Touch setter

Condition: excellent (used), Year of construction: 2011, CNC Turning and Milling Center Okuma LT 2000 EX – M Control: OSP-P200LA Year of manufacture: 2011 Internal machine no. 23 Swing diameter over bed: 400 mm Distance between centers: 960 mm Gjdpeyli Aksfx An Rsbl Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: Z-axis: 700 mm W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001) Equipment: 2 tool turrets, each with 16 stations (all stations driven) Touch setter IGF Chip conveyor Bar feeder, 3.00 m Main spindle collet chuck Sub spindle 3-jaw chuck Parts catcher Workpiece removal system Extraction unit Coolant system with high-pressure pump and paper band filter system

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Gbedpfx Ansyk Uime Rol Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Touch setter OneTouch IGF 3-jaw chuck Tailstock

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle speed (min.): 3,200 rpm, total height: 1,700 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 6,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA ES L II-M Year 2002 A small, very compact lathe with extensive capabilities. Control U-10L, parts catcher, touchsetter, V12 turret VDI 30— all driven positions, manual tailstock, chip conveyor, coolant pump, bar feeder Samsys MUS-3000 year 2007, including equipment, SMW chuck KNCS-N210-52, package with jaws and 24 tools optionally available. Gbedpfxsyna Uio An Rol