Used Okuma Lu 25 for sale (238)

Condition: good (used), Year of construction: 2005, The machine has been maintained annually under a service contract with Okuma. Okuma Mac Turn 550 W Year of manufacture: 2005 Control: OSP-E 100 L Max. turning diameter: 720 mm Distance between tailstock tip and spindle nose: 2,505 mm Y axis travel: 250 mm Main spindle speed: up to 3,500 rpm Spindle motor power: 30 kW Lower turret with 12 stations Milling spindle with infinitely variable B axis 80-position tool magazine HSK 100 tool holder 3-jaw chuck, diameter: 315 mm In 2023, the cable carrier for the W axis including all hoses was replaced. In October 2024, the linear guides for X/Y/Z axes were renewed. All work was carried out by Okuma. The machine was cleaned. Covers and sheet metal parts were dismantled. 8th axis dismantled. Travelling column dismantled and removed from the machine. ATC dismantled and removed from the machine. All linear guides removed. Mating surfaces of the ZA axis cleaned. New ZA axis linear guide incl. carriages installed and secured at specified torque. New ZA axis ballscrew incl. bearings installed. Ksdpfx Akeyt Nvtoxedk Base plate for the travelling column installed and secured at specified torque, respectively fastened to carriages. Lubrication lines connected. ATC including auxiliary components reinstalled and connected. New YA and XA linear guides installed and tightened to specification. New YA axis ballscrew with bearings installed. Travelling column installed and lubrication lines connected. XA base plate installed and aligned. 8th axis installed and aligned. H1 turret mounted - Install drive motor for 8th axis - Assemble 8th axis and new H1, set geometry - Function test for 8th axis and H1 - Run-in program for B axis approx. 12 hours, then drain old oil from 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various covers - Install chuck - Adjust zero points - Check tool change

Year of construction: 2007, condition: excellent (used), X AXIS: 762 MM Y AXIS: 560 MM Z AXIS: 460 MM SPINDLE SPEED: 15,000 RPM SPINDLE CONE: BT 40 TABLE DIMENSION: 460 X 760 MM MAXIMUM LOAD: 400 KG RAPID FEEDS X/Y AXIS: 40,000 MM/MIN Kdodpfx Aepyg Rkokxjk Z AXIS RAPID FEEDS: 32,000 MM/MIN WORKING FEED: 32,000 MM/MIN TOOL WAREHOUSE: 20 PLACES TOOL CHANGE TIME: 1.2 SEC – 3.8 SEC MAXIMUM TOOL WEIGHT: 8 KG MAXIMUM TOOL LENGTH: 300 MM CONTROL: OSP-P200M

Condition: good (used), Year of construction: 1992, operating hours: 30,000 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP5020M, total height: 2,700 mm, total length: 2,500 mm, total width: 2,500 mm, rotational speed (max.): 8,000 rpm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 10,000 h, coolant supply: 5 bar, number of slots in tool magazine: 18, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, CNC Milling Machine Okuma VR40 Year of manufacture: approx. 1992 3 axes, X = 560 mm, Y = 450 mm, Z = 450 mm travel. Spindle speed: 8,000 rpm, SK40 Spindle hours: approx. 10,000 h Coolant pump with approx. 5 bar coolant pressure Coolant with six nozzles around the spindle Tool magazine with 18 stations Various tool holders with assorted tools The machine originally operated in a sheltered workshop and has also only been used occasionally by us. It is in very good condition, and both the axes and the spindle run quietly and smoothly. Accuracy is very good. The machine is available for inspection and demonstration under power at our facility. It is sold with three machine vises and all accessories shown in the photos. Complete documentation is available. Two tool stations are defective as the plastic grippers are broken. They can be replaced with new grippers. Normally, the machine has 20 tool stations. This has never been an issue for us over the years. Kdsdpfx Asyha R Rskxok

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: OSP5000M-G, OKUMA MC-30VA vertical machining center, high-reliability Japanese machine. Kdjdpfx Akoyt E H Uoxok Fully operational and complete machine, in use until recently. Main features: • Brand: OKUMA • Model: MC-30VA • CNC Control: OSP5000M-G • Year: 1988 • Vertical machining center with automatic tool changer • Very robust structure, typical of Japanese machines • Complete and non-cannibalized machine The machine can be seen under power at our workshop. Ideal for: • machine shops • technical schools • export to foreign markets • general machining purposes Condition: operational. Sold as is. Loading and transport at buyer's expense.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Kodpjym Na Eefx Akxsdk Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: ready for operation (used), A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible. Kdedpjyttwzjfx Akxok

Year of construction: 2022, condition: excellent (used), Machine Specifications​ Imperial Metric CNC Control Yes Control Type OSP-P300LA-e # of Axes 2 Swing 20.47" Ksdpfx Aoymq Ukskxodk Turning Diameter 16.14" Center Distance 43.31" Chuck Size 10" Bar Capacity 3.15" X-Axis Travel 9.05" Z-Axis Travel 45.04" Spindle Nose A2-8 Spindle Speed 3,000 rpm Main Motor 20 HP Turret Capacity 12 Tailstock (Yes/No) Yes

Condition: used, Year of construction: 2001, turning diameter 80 mm Kedpfxeymgcds Akxsdk turning length 800 mm control OSP-U100L total power requirement 22 kW weight of the machine ca. 6,3 t

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires. Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse), we can ask Okuma to make a test report if required. New price was 300.000 euro's, so half price for an as-new machine with only 930 hours! Kodpfx Aowzzrkekxodk

Condition: excellent (used), Year of construction: 2023, CNC Turning and Milling Center Okuma Multus B300 II Control: OSP-P 300SA Year of manufacture: 2023 Axis travels: Turning length: 900 mm Max. turning diameter: 630 mm X-axis: 580 mm Y-axis: 160 mm (+80/-80 mm) Kdedpoyk Uhcefx Akxek Z-axis: 935 mm B-axis: 225° (-30° / +195°; 0.001° increments) C-axis: 360° Tool holder: HSK-A 63 Total tool stations: 40 Spindle speed: 50 – 5,000 rpm Equipment: Chip conveyor NC-controlled tailstock, MT5 Touch setter High-pressure coolant pump IKZ 40 Bar Renishaw probe preparation 3-jaw chuck Kitagawa B212 Ø304 mm

Condition: excellent (used), Year of construction: 2013, CNC Turning and Milling Center Okuma Multus B400II-W 2000 Control: OSP-P 300S Year of manufacture: 2013 X-axis: 690 mm Y-axis with travel: 230 mm Z-axis: 2,045 mm B-axis: up to 225°, positioning in 0.001° increments Turning length: 2,000 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 80 stations Equipment: - Collision avoidance system - Tool monitoring system - Tool measurement device - Tool presetting - Subspindle with tailstock function - Renishaw probe - Automatic door Kdedjyk Tv Espfx Akxsk - NC steady rest carrier with SMW SLU-Z 3.2 steady rest - ONE touch IGF - Hinged belt conveyor - Main spindle replaced in 2022

Condition: excellent (used), Year of construction: 2014, CNC Turning and Milling Center Okuma Multus U4000 2SW 1500 Control: OSP-P 300 S-H Kjdpeyk Tq Ajfx Akxjdk Year of manufacture: 2014 Spindle hours: approx. 2,050 h Travels: X-axis: 695 mm Y-axis travel: +150/-150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Spindle mounting: HSK 63 Total tool stations: 40 Accessories: XA and YA axes equipped with direct absolute measuring system (Okuma ABSO-Scale) In-process measurement with Renishaw probe for X/Z axes Measurement in Y-axis including angled axis measurement Kitagawa B215A11 max. 2,800 rpm Kitagawa B210A8 max. 4,200 rpm Kitagawa F 2596-H01 hollow chuck cylinder Ø96 mm One-Touch IGF Multi-function tool software Harmonic spindle speed vibration control Simultaneous 5-axis machining software package Chip conveyor Coolant tank with 70 bar high-pressure pump

Condition: excellent (used), Year of construction: 2018, Okuma GENOS L2000-e Year: 2018 Max turning dia ( mm ) Ø200 Max work length ( mm ) 380 Travels X axis (mm) 165 Z axis (mm) 400 C axis 360° ( 0.001° increments) Spindle speed ( min-1 ) 5,000 Spindle nose JIS A2-6 Turret type V12 VDI (Axial) No. of tools 12 (L/M) OD tool shank (mm) 20×20 ID tool shank dia (mm) Ø32 Milling tool Spindle speed (rpm) 6,000 Kdjdsyk Hwijpfx Akxjk Rapid traverse (X, Z ) m/min X:25 , Z:30 Rapid traverse (C) (rpm) C：200 Tailstock quill diameter (mm) Ø90 Tapered bore type MT.5 (revolving center) Quill travel (mm) 100 Motors, Main spindle (20min/cont) (kW) VAC15/11 Milling tool spindle (kW) PREX 4.0/1.8 (25min／cont) Coolant pump motor (kW) 0.8 Machine size Height (mm) 1,620 Floor space (mm) 2100×1850 Weight (kg) 3,700 Accessories/options: - C-axis - static tool holders - tailstock - foot pedals for chuck and tailstock - center sleeve for tailstock - swarf conveyor - coolant tank - LNS feeder - documentations

Condition: excellent (used), Year of construction: 2014, CNC Turning and Milling Center Okuma Multus U4000 1SC 1500 BigBore Control: OSP-P 300S Year of manufacture: 2014 X-axis: 695 mm Y-axis travel: +150/-150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° increments C-axis: 360°, positioning in 0.001° increments Turning diameter: 650 mm Turning length: 1,500 mm Spindle interface: Capto C6 Total tool stations: 80 Kodpfx Asyk Ddgjkxedk Equipment: - NC tailstock - Travelling hydraulic steady rest AX 5 on NC axis - Coolant system with band filter - Kitagawa BB 212-11 hydraulic 3-jaw chuck - Automatic tool touch setter - High-pressure coolant system (IKZ) - Software option High Cut Pro (High-accuracy package with Super Nurbs) - CAS collision avoidance system - Main spindle orientation, electric - Multitool with turning function for Y-axis - Helix function - Automatic main power shut-off - DNC-DT interface - Machining Navi M-i (milling), speed control to minimize vibration - One-Touch IGF - Chip conveyor

Condition: used, Year of construction: 2019, 2019 OKUMA MA600HII 4-Axis Milling Machine with OSP P300M Control, 630 x 630mm Table max loads up to 1,200kg, high-speed Spindle 12,000rpm, Traverse Speed 60m/min, full-size Tool Magazine with 171 Stations, X Axis Travel 1000, Z Axis Travel 1000, Y Axis Travel 900. S/No. 224574 (2019) Kdodpfx Asyplrpekxek A charge of €4500 for preparation and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Location: These lots are located in Mielec, Poland. Please visit our website for more details. Auction 3459

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, Machine type: Horizontal Machining Center Manufacturer: Okuma Model: MA-40HA Year of manufacture: 2001 Control: OSP-U100M Spindle hours: 21,478 Country of origin: Japan Delivery time: ex-stock • In excellent condition! • Well maintained! • Immediately ready for operation! Machine Equipment - Number of axes: 4 - Spindle speed: 15,000 rpm - Touch setter (tool breakage control and tool measurement) - 2-pallet automatic pallet changer (APC) - ATC magazine with 60 tool positions - Through-spindle coolant (cooling system), bag filter system 20 bar - Signal tower - Chip conveyor Technical Data - Travels X-axis 560 mm Y-axis 610 mm Z-axis 560 mm Spindle center to pallet surface 50~660 mm Spindle nose to pallet center 150~710 mm - Table Pallet size: 400 x 400 mm Max. load capacity: 400 kg Max. workpiece size: 600 x 710 mm Indexing time 2.3 sec. (90°), 3.0 sec. (180°) - Spindle BT40 Bearing diameter: 70 mm Speed: 15,000 rpm - Feed rate (X, Y, Z) 40,000 mm/min - Motor Spindle: 15/11 kW - ATC Magazine capacity: 60 tools Tool type: BT40 Max. tool length: 300 mm Max. tool weight: 10 kg - APC Pallet changer: 2-station Pallet change time: 7 sec. - Power 45 kVA Kodpfx Akjycguxsxjdk Machine dimensions: approx. 2,480 x 4,164 mm Machine height: approx. 2,720 mm Weight: approx. 10,000 kg Optional Transport organization and execution Machine installation and setup Machine commissioning and handover ready for production

Condition: used, Year of construction: 2001, x-travel 560 mm Kjdsyi Hv Nopfx Akxjdk y-travel 460 mm z-travel 450 mm Control OSP U10 M total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: repair required (used), Year of construction: 2013, operating hours: 11,000 h, functionality: limited functionality, turning length: 1,000 mm, turning diameter: 350 mm, spindle bore: 68 mm, spindle speed (max.): 3,800 rpm, overall weight: 6,500 kg, chuck outer diameter: 250 mm, The machine has a crack in the turret housing and in the cross-slide. Although everything is operational, due to this damage it is better suited as a source for spare parts. All attachments, servomotors, coolant pump, control unit, chip conveyor, etc. are in impeccable condition. Kedoynf Nfspfx Akxodk

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning length: 900 mm, turning diameter over cross slide: 630 mm, turning diameter: 450 mm, spindle motor power: 22,000 W, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, spindle bore: 80 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 945 mm, mount diameter: 130 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 26,000 m/min, rapid traverse Z-axis: 40,000 m/min, total height: 2,600 mm, total length: 3,750 mm, total width: 2,050 mm, spindle nose: JIS A2-6, travel distance W-axis: 1,000 mm, Equipment: documentation/manual, Turn-mill center OKUMA Multus B300-W TECHNICAL CHARACTERISTICS : CNC control : OSP-P200L Distance between centers : 900 [mm] Max. cutting diameter : 630 [mm] Height of centers over cariage: 630 [mm] Max. swing over bed: 630 [mm] Stroke X axis: 580 [mm] Stroke Y axis: -80 / +80 [mm] Stroke Z axis: 935 [mm] Stroke W axis: 1000 [mm] B axis indexing precision: 0.001 [°] Milling head max. speed: 10000 [rpm] Milling head spindle attachment: HSK-A63 Max. milling spindle power :16 [kW] Tool magazine capacity: 60 Max. tool length :300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 8 [Kg] Rapid traverse rate X axis: 40000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 20000 [mm/min] Spindle nose: JIS A2-6 Kjdpfxow Eip Se Akxjdk Min. spindle speed :38 [rpm] Max. spindle speed: 5000 [rpm] Increment C-axis :0.001 [°] Spindle power: 22 [kW] Counter spindle nose: JIS A2-6 Min. counter spindle spindle speed: 38 [rpm] Max. counter spindle speed: 5000 [rpm] Counter spindle power :15 [kW] Total power required :39.3 [kVA] Rated current :56.7 [A] Supply voltage :400 [V] Machine dimensions: 4340 x 2050 x 2600 ADDITIONAL INFORMATION : x1 One-Touch IGF software option (CD-ROM also for PC programming) x1 remote electronic handwheel x1 2-colour status light x1 chip conveyor x1 coolant tank

Condition: not inspected (used), Year of construction: 1989, We are offering, as part of an insolvency liquidation: 2 x CNC lathes (1 x sub-spindle, 1 x lower turret), used + Bar feeder + Accessories 1. CNC Lathe with Sub-Spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - Bar feeder HYDROBAR Kodjx Ed A Dopfx Akxedk - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC Lathe with 2 x turrets Make: MIYANO Model: JNC 45-T Year: 1989 Control: Fanuc 0-T Bar feeder HYDROBAR - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 collets - Approx. 40 sets of jaws - Various tool holders + tools - Documentation The machines are untested, but were in operation until the end. The machines have been dismantled and the price includes loading.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Controller OKUMA OSP P200-M Table size 1000 x 460 mm Table load 700 kgs X travel 762 mm Y travel 460 mm Z travel 460 mm Spindle speed 15000 rpm Tool holder type MAS BT40 Kodpfxsuu Rwye Akxedk ATC magazin 20-fold Weight 6500 kgs Dimensions LxWxH = 2750 x 2160 x 2715 mm Features, accessories - Chip conveyor - Coolant unit - Spindle cooler - CTS - Manuals Very good condition.It will be sold because of liquidation of production.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Controller OSP700L Swing dia 300 mm Turning dia 170 mm Between centers 340 mm X travel 150 mm Z travel 350 mm C axis 360/0,001 degree Spindle hole D42 mm Chuck dia 200 mm Turret 12-fold Tool holder type VDI30 Spindle speed 50 - 6000 rpm Spindle power 5,5/7,5 kW Power required 400V, 15 kVA Weight 3500 kg Dimensions LxWxH = 2300 x 1635 x 1850 mm Accessories - C axis and live tool turret - Hydraulic tailstock - Coolant unit - Chip conveyor - Hydraulic 3 jaws, D160 mm chuck - Machine light Kdodpfevmzc Uox Akxok Good condition, still under power.

Condition: used, Year of construction: 1989, Maximum swing over bed: 400 mm, over carriage: 250 mm. | Maximum turning length: 500 mm. | Spindle speed: 75 / 4,200 rpm | Power: 11 / 7.5 kW | Spindle bore diameter: 56 mm | Approximate total weight: 4,500 kg. Kjdpfx Aksyl Uqasxsdk

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Kjdoyf Ncqspfx Akxsdk Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random ATC Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: used, functionality: fully functional, Swing diameter over bed: Ø 450 mm Swing diameter over carriage: Ø 280 mm Max. swing diameter: Ø 280 mm Turning length: 450 mm Distance between centers: 450 mm Speed range: stepless variable, approx. 50 – 5000 rpm Turret: Kjdpfx Ajxg Itvjkxodk 1x 8 tool positions 1x 12 tool positions Tool system: VDI-30 Travels: X-axis travel: 120 + 25 mm Z-axis travel: 450 mm Rapid traverse: 12 m/min Motors & Electrical: Spindle motor: approx. 5.5 / 7.5 kW (continuous / 30 min) Total connected load: 29 kVA Power supply: 380V, 3-phase, 50 Hz Full load current: 44 A Weight & Dimensions: Machine weight: approx. 4,800 kg Dimensions (L×W×H): 2,985 × 1,720 × 1,850 mm