Used Okuma Multus U3000 for sale (178)

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 2995 mm Measurements depth 5425 mm Measurements height 2955 mm Machine weight 16500 kg Control Unit Model OSP-P300SA Brand OKUMA Main Drive Number of spindles 1 Spindle speed range 4200 rpm Spindle motor power 22 kw Spindle bore ø91 mm Number of axis 6 Movement Kslhcdjwhgt Tjw Aslt X-Axis Movement 645 mm Y-Axis Movement 250 mm Z-Axis Movement 1600 mm W-Axis Movement 1594 mm B-Axis Movement 240° C-Axis Movement 360° 1-AXIS Movement -30 - 210 2-AXIS Movement 360 Workpiece Workpiece drm 650 mm Workpiece X 1500 mm Turret Number of turrets 1 Rotating tools Yes Media Internal cooling Yes Additional Equipment Capto C6 tool system for H1 turret Internal coolant supply for rotating tools, pump with pressure max 20 bar including bag filter, external cooling of tool spindle, pump with pressure max 3 bar Tool magazine with 80 pockets External air supply and through the tool spindle for turning holders and rotating tools Hinge belt tensioner Interlit ISF Drum trough filter TMF 300 with clean tank 980 Workpiece gripper programmable, for workpiece size ø 70 x 150 mm 80 tool positions Spindle front bearing diameter 140mm / Spindle bore diameter 91mm Counter spindle 420 Nm; 5000 1/minSpindle front bearing diameter 120mm This 6-axis Okuma Multus U3000 1SW 1500 was manufactured in 2023. A vertical machining center featuring a swing over saddle of ø650 mm, it can handle a maximum machining diameter and length of 650mm and 1500mm, respectively. It boasts extensive travels with X: 645m, Z: 1600mm, Y: 250mm, W: 1594mm, and a C-axis of 360 degrees. Ideal for complex machining tasks, the Okuma Multus U3000 1SW 1500 machine we have for sale. Contact us for further details regarding this vertical machining center. Application Types Milling

Condition: refurbished (used), Year of construction: 2014, Functionality: fully functional, Ref. No.: LT-2418 Manufacturer: Okuma Model: Multus U3000 1SW-1500 Control: Okuma OSP-P300S-H Year of manufacture: 2014 Commissioning: 2.015 Language Keyboards / Software: International / English Country of origin: Japan Technical Characteristics: Capacity: Turning on bed: Ø 650 mm Distance between points: 1.500 mm Maximum turning diameter: Ø 650 mm Maximum turning length: 1.500 mm Bar pitch (main spindle): Ø 70 mm Bar passage (opposite spindle): Ø 70 mm Main spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed ranges: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) Opposing spindle: Spindle diameter: Ø 140 mm Spindle nose (type): JIS A2-8 Spindle inside diameter: Ø 80 mm Speed range: 2 ranges, infinitely variable Spindle speed: 50 - 4.200 rpm Motor: 22/15 kW (30 min/cont) X-axis: Stroke: 645 mm Rapid traverse: 50.000 mm/min Z axis: Stroke: 1,600 mm Rapid traverse: 50.000 mm/min Y-axis: Stroke: 250 [± 125] mm Rapid traverse: 40,000 mm/min W-axis: Stroke: 1,594 mm Rapid traverse: 30.000 mm/min B axis: Controlled angle: -30° to +210° (increment 0.001°) Rapid traverse: 30 rev/min C axis: Controlled angle: 360° (0.0001° increment) Klolhcju U E Avodw Aet Rapid traverse: 200 rpm Turret: Type: H1 Number of tools: 1 (L or M tool) Tool dimensions: Turning outside: 25 x 25 mm Turning inside: Ø 40 mm Milling head: Spindle speed: 50 - 12.000 rpm Speed ranges: 2 speed ranges, infinitely variable Motor: 25/19 kW (3 min/cont) Tool changer (ATC): Cone Toolholder: HSK-A63 Number of tools: 40 Max. diameter of adjacent tools: ø 90 mm Maximum diameter of non-adjacent tools: ø 130 mm Maximum tool length: 400 mm Maximum weight of each tool: 10 Kgf Dimensions and weights: Height of the machine: 2.905 mm Occupied floor area: 4,480 x 2,995 mm (4,480 x 2,995 mm) Machine weight: 16,200 kg

Condition: ready for operation (used), Year of construction: 2017, turning length: 3,000 mm, turning diameter: 1,050 mm, spindle speed (max.): 1,500 rpm, chuck outer diameter: 375 mm, Multitasking Machine OKUMA MULTUS B750 C3000 YEAR2017 Kslhcdwjwi Ezre Aslt OSP-P300SA 15" chuck Max Machining dia:1050mm Length:3000mm

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model OSP-P300S-H Movement Y-Axis Movement 160 Kjlhcswkkw Ujdw Aolt Additional Equipment 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 8": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This DECKEL FP4A was manufactured in 1994. A vertical machining centre featuring a travel range of X=565mm, Y=505mm, Z=400mm, SK40 tool holder, and a spindle speed of up to 4000 rpm. Consider the opportunity to buy this DECKEL FP4A vertical machining centre. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2013, operating hours: 3,901 h, Functionality: fully functional, machine/vehicle number: 169527, turning diameter: 710 mm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 2,045 mm, rotational speed (max.): 10,000 rpm, The machine can be shipped free of charge for €2,500. TECHNICAL DETAILS X-axis travel: 690 mm Y-axis travel: 230 mm Z-axis travel: 2,045 mm B-axis swivel range: up to 225°, 0.001° interpolation Turning parameters Turning diameter: 710 mm Turning length: 2,000 mm Klolswff R Sshcdw Ast Torque: 65 Nm Bar capacity: 110 mm Spindle bore: 110 mm Spindle nose: HSK-A63 Spindle speed: 38 - 2,800 rpm Speed: 50 - 10,000 rpm Counter spindle Counter spindle motor power: 22,000 W Max. counter spindle speed: 3,800 rpm Maximum counter spindle torque: 412 Nm Counter spindle bore: 80 mm Spindle drive Spindle motor power: 30,000 W Tool data Number of tool magazine slots: 80 Tool length: 400 mm MACHINE DETAILS Overall length: 7,930 mm Overall width: 2,998 mm Overall height: 3,157 mm Total weight: 16,000 kg EQUIPMENT - NC tailstock - IFS exhaust system - Door automation - Continuously adjustable speed and counter spindle speed - NC steady rest SMW SLU-Z 3.2 (clamping range Ø50–200) - In-process measurement with Renishaw possible - Documentation/Manual

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, CNC Turning- and Milling Center / Brand: OKUMA / Type: MULTUS B400 - C / Year of construction: 06/2008 For chuck parts up to approx. Ø 400 mm and shaft parts up to approx. 1.500 mm in length. The machine can be inspected by appointment under power. Condition: Condition: Fully functional / ready for operation. TECHNICAL SPECIFICATIONS: - Control: CNC OKUMA OSP-P200L - Turning diameter over bed max.: 700 mm - Turning length: 1.500 mm Main spindle: - Speed range: 2.800 rpm - Increased main spindle: Ø 150 mm, Spindle bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 Koletqy Rmehcdw Aolt - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centring steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, bore in draw tube max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0,001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis with stroke + 115/-115 = 230 mm - B-axis 225°, Positioning in 0,001° - Internal coolant supply for driven tools - Electrostatic extraction system - Chip conveyor - Documentation - CE marking .... Further extensive equipment ..... There is no guarantee for correctness and completeness of the technical details and accessories. Detailed technical data sheet and information on equipment available on request.

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 22 [kW] - Spindle speeds : 45 - 5000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 600 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-6 - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0,001 [°] - Spindle / counter-spindle distance : 750 [mm] TURNING-MILLING SPINDLE - B axis indexing precision : 0,001 [°] - Tool type : HSK63 - Spindle speeds : 20000 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 POWER SUPPLY - Supply voltage : 380 [V] MACHINE HOURS - Number of hours under power : 48515 [h] - Number of working hours : 28431 [h] EQUIPMENT - CNC : OKUMA OSP-P300S - Electronic handwheel - Interface : USB - Software options : Tool ID, Virtual 3D monitor, helical cutting - Linear scales - 3 colors status lamp - Tool probe : BLUM PICO - Workpiece probe : Renishaw RMP400 - Coolant tank * with high-pressure pump : 15 [bars] * Coolant through spindle - Oil mist extractor : ELBARON RON/A1500 SH Kljlheup Hwrscdw Aot - Electric transformer - Collet chuck : 2

Condition: ready for operation (used), Year of construction: 2007, operating hours: 4,769 h, Functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 630 mm, spindle motor power: 15 W, spindle speed (min.): 38 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 100 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 935 mm, tool mount: 130 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,600 mm, total length: 4,340 mm, chuck outer diameter: 255 mm, total width: 2,050 mm, spindle nose: JIS A2-6, overall weight: 10,300 kg, tool length: 300 mm, Equipment: documentation/manual, rotational speed infinitely variable, Turn-mill center OKUMA Multus B300-W TECHNICAL CHARACTERISTICS : CNC control : OSP-P200L Distance between centers : 900 [mm] Max. cutting diameter : 630 [mm] Height of centers over cariage: 630 [mm] Max. swing over bed: 630 [mm] Stroke X axis: 580 [mm] Stroke Y axis: -80 / +80 [mm] Stroke Z axis: 935 [mm] Stroke W axis: 1000 [mm] Stroke B axis: -30 / +195 [°] B axis indexing precision: 0.001 [°] Milling head max. speed: 6000 [rpm] Milling head spindle attachment: HSK-A63 Max. milling spindle power :11 [kW] Max. milling spindle torque :65.7 [Nm] Tool magazine capacity: 60 Max. tool length :300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 10 [Kg] Rapid traverse rate X axis: 40000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 20000 [mm/min] Spindle nose: JIS A2-6 Spindle throughbore: 100 [mm] Min. spindle speed :38 [rpm] Max. spindle speed: 5000 [rpm] Increment C-axis :0.001 [°] Spindle power: 15 [kW] Counter spindle nose: JIS A2-6 Min. counter spindle spindle speed: 38 [rpm] Max. counter spindle speed: 5000 [rpm] Counter spindle power :15 [kW] Total power required :39.3 [kVA] Rated current :56.7 [A] Supply voltage :400 [V] Number of USB ports :2 Number of hours under power: 16905 [h] Number of running hours: 4769 [h] Spindle running hours: 3544 [h] Machine dimensions: 4340 x 2050 x 2600 ADDITIONAL INFORMATION : x1 One-Touch IGF software option (CD-ROM also for PC programming) x1 KITAGAWA B-210 Ø255 [mm] 3-jaw chuck x1 KITAGAWA B-208 3-jaw chuck Ø210 [mm] x1 MARPOSS T18 tool probe x1 remote electronic handwheel x93 HSK-A63 milling attachments x93 HSK-A63 turning attachments x1 2-colour status light x1 chip conveyor x1 coolant tank x1 transformer x1 set of OKUMA manuals + CD's Machine visible under power in our premises by appointment. Kelhsvr S Ufecdw Ajlt Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: used, Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 26 m/min, bar diameter: 51 mm, Okuma Multus B200-W Machine weight: approx. 8 tons Max. Spindle speed: 22000 rpm. Control: Okuma OVP 200L Tool holder: HSK 63 Kljlovck A Nshcdw Aet Number of tool positions: 40

Condition: ready for operation (used), Year of construction: 2023, General Data Measurements width 2257 Measurements depth 4035 Measurements height 2538 Machine weight 10000 Control Unit Brand OKUMA Model OKUMA OSP-P300SA Movement X-Axis Movement 580 mm (+480/-20 mm) Kljlhowbau Docdw Aot Y-Axis Movement 160 mm (+80/-80 mm) Z-Axis Movement 935 mm B-Axis Movement 225° (-30°/+195°; 0.001° increments)225° (-30°/+195°; 0.001° increments) C-Axis Movement 360° (0.001° increments) Tools Slots in storage 40 Media Chip conveyor Yes Additional Equipment Thermal Stability Concept (TAS-S & TAS-C) Full enclosure and LED workspace lighting Hydraulic power unit for basic machine operations 3D Simulation and collision avoidance (CAS) This 5-axis Okuma Multus B300 II turn-mill centre was manufactured in 2023, featuring a max turning diameter of 630 mm and a machining length of 900 mm. It includes a collision avoidance system, thermal stability, and an easy-to-use OSP-P300SA controller with a 15” touch screen. If you are looking to get high-quality turning and milling capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,771 h, Control Unit Brand OKUMA Model OSP-P300SA Main Drive Spindle speed range 38-3800 Tool taper HSK 63 Number of axis 4 Movement Y-Axis Movement 160 mm B-Axis Movement 0.001° Tools Slots in storage 40 Media Klslhcdov S Naljw Aot Chip conveyor Yes Additional Equipment HI-Cut Pro high-speed control This 4-axis Okuma Multus B300 II Turn Mill Centre was manufactured in 2022. It features a control unit OKUMA OSP-P300SA, a main spindle with a three-jaw chuck diameter of 304mm, and a counter spindle with a C-axis. The milling spindle supports up to 6000 rpm with a torque of 65.7 Nm. If you are looking to get high-quality milling and turning capabilities, consider the Okuma Multus B300 II machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 237535, Okuma LU3000EX nr237535 2021 model Kljlhcowffw Ejdw Ast Power: 34.2 kVA

Condition: as good as new (ex-display), Year of construction: 2014, operating hours: 109 h, Functionality: fully functional, machine/vehicle number: 180178, Equipment: documentation/manual, OKUMA LU3000EX MY 2SC950 Additional Options Big bore spindle with: * Main spindle motor VAC 22/15kW (30min/cont) * Spindle speed 42-4200rpm * Spindle bore dia.91mm, bearing ID 140mm JIS A2-8 nose Pre-arrangement for chip conveyor, side disposal Chip conveyor, side chip disposal H-type High pressure coolant pump MTH2-50/5 Hydraulic hollow chuck B210A8, hollow cylinder SS1770, draw tube and all necessary parts OSP Suite Machining Navi L-G (software, microphone and USB cable only) Kslor Hn T Rshcdw Aelt

Condition: used, Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 177465, Okuma LU3000EX No. 177465 R, Year 2014 Kjlhcdwjwfflco Aslt Power: 31 kVA

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, turning length: 500 mm, turning diameter: 530 mm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 520 mm, TECHNICAL DETAILS Turning diameter: 530 mm Turning length: 500 mm Turning diameter over slide: 340 mm Bar capacity: 62 mm Spindle Spindle speed: 3,800 rpm Spindle power: 11–15 kW Spindle mount: ASA A2-6" Travels X-axis travel: 260 mm Z-axis travel: 520 mm Feed rates Rapid X-axis feed: 15 m/min Rapid Z-axis feed: 20 m/min Kleljwi I Syohcdw Ajt Tool turret Number of positions: 12 Control system Control unit: OKUMA MACHINE DETAILS Overall dimensions (L × W × H): 2,815 × 2,815 × 1,745 mm EQUIPMENT -Chip conveyor

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 107963, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller model: OSP U100, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis travel: 1,050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Table Max. workpiece dimensions: 1,300 x 560 mm Distance from table surface to spindle nose: 150 – 610 mm Max. table load: 900 kg Spindle Spindle speed: 15,000 rpm Spindle power: 22 / 18.5 kW Cooling through spindle: 20 bar Feed rates Rapid traverse X/Y-axis: 40 m/min Rapid traverse Z-axis: 32 m/min Working feed X/Y/Z-axis: 32 m/min Kolowh Tfvohcdw Ajlt Tool magazine Tool capacity: 20 tools Tool holder: BT 40 Tool selection: Memory Random MACHINE DETAILS Footprint: 2,510 x 3,100 mm Machine height: 2,476 mm Machine weight: 7,500 kg EQUIPMENT - Chip conveyor

Year of construction: 2003, Condition: ready for operation (used), General Data Measurements width 1815 mm Measurements depth 2660 mm Measurements height 2200 mm Machine weight 6000 kg Control Unit Brand OKUMA Kolhjwlkyljcdw Aolt Model OSP Е100L Main Drive Spindle speed range 3800 Spindle motor power 22 kW Number of axis 6 Movement X-Axis Movement 280 mm X-Axis Rapid Traverse 20 m/min Y-Axis Movement 120 mm Y-Axis Rapid Traverse 10 m/min Z-Axis Movement 450 mm Z-Axis Rapid Traverse 25 m/min W-Axis Movement 520 mm W-Axis Rapid Traverse 25 m/min Workpiece Workpiece drm over bed Ø630 Turret Tool taper V12-M VDI Additional Equipment Accessories: A lot of tool holders included (without the cutting tools) This 6-axis Okuma Space Turn LB 300 MYW was manufactured in 2003, featuring a robust NC unit Control OSP Е100L. It boasts a main spindle speed of 3800 min-1 with a 22 kW power and a maximum bar diameter of Ø70. Swing over bed is Ø630, and it includes a radial turret V12-M VDI. Ideal for complex turning operations. Consider the opportunity to buy this Okuma Space Turn LB 300 MYW horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2005, turning diameter 340 mm turning length 1.000 mm control OSP E 100 L greates pass round over bed 530 mm Swing dia. over traverse guideway 420 mm distance between spindles 1.020 mm axis stroke: x-axis 260 (185 + 75) mm z-axis 1.020 mm C-Axis 360 ° Main spindle: turning speed range - main spindle 38 - 3.800 min/-1 power capacity - main spindel 22 / 15 kW transmission ratio 1 spindle nose JIS A2-8 spindle bearing diameter 120 mm max. usable bar diameter 70 mm C - Axis 0,001 ° chucking diameter 250 mm turret: number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 25 mm Drill shank diameter 40 mm tool taper VDI 40 Spindle speed - driven tool stations 45 - 4.500 min -1 power capacity - driven tool-stations 5,5 / 3,3 kW Tailstock: diameter of quill 90 mm quill stroke 120 mm taper of center MT 5 feeds: rapid traverse ( X / Y / Z ) 20 / 10 / 25 m/min rapid traverse C-axis 200 min/-1 feed speeds 0,001 - 1.000.000 mm/min total power requirement 25 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 6,0 x 3,0 x 2,5 m Kelhcdjtqmr Dow Aelt CNC-Turning- and Millingcenter OKUMA - SpaceTurn LB 300 MC / 1000 - Tool-Drive - C-Axis - Without driven toolholders shown on pictures !

Condition: ready for operation (used), Okuma BDU-30A Brushless Servomotor Drive Unit with E4809-045-061-D, serial number as per photo, used, normal signs of wear, 100% functional Kslhcdwoi D Naas Ajlt

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Used CNC Lathe Manufacturer: Okuma Model: Soarer L270E Year of Manufacture: 2001 Control: Okuma OSP U10L or OSP U100L Machine weight: approx. 4,500 kg Dimensions (L x W x H): approx. 2,800 x 1,850 x 2,000 mm Machining Capacity Max. Swing Diameter Over Bed: 450 mm Max. Turning Diameter: 270 mm Max. Turning Length: 480–600 mm (depending on model) Bar Machining Capacity up to: Ø 50–53 mm Center Distance: 500–600 mm ⚙️ Spindle & Drive Spindle Speed: 100–4,200 rpm Spindle Bore: 53–61 mm Spindle Nose: A2-6 Drive power: 11 kW Kelhcdwewlap Nj Aolt 🧰 Tool turret & axes Turret: 8-station tool turret Travel ranges: X-axis: 155 mm Z-axis: 520 mm Rapid traverse: X-axis: 15 m/min Z-axis: 20 m/min 🔩 Equipment & accessories Hydraulic three-jaw chuck: Ø 200–210 mm (without chuck) Coolant system: included Chip conveyor: integrated Tailstock: NC-programmable, quill stroke 100 mm Interface: for data transmission (e.g., RS-232C) Working area: fully enclosed with lighting If you are looking for further information on specific equipment variants or available machines, please feel free to contact me.

Condition: used, Year of construction: 1997, Distance between centers 2070 mm Swing over bed 700 mm Swing over carriage 430 mm Max turning diameter 460 mm diameter (2000 mm) Spindle bore 90 mm Spindle speeds 14-3200 rpm Z-axis movement 2070 mm X-axis movement 330 mm Turret w/12 stations Tailstock taper MT 5 Control: OSP 7000-L Equipped with: Hydraulic steady rest Chip conveyor 10-20 tool holders 10-20 sets of jaws Kjljwkvmzjhcdw Ajlt

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Control: OSP-7000 L Turning length: 600 mm Turning diameter: 270 mm Turning diameter over bed: 380 mm Kljlhewl N S Hscdw Aet Turning diameter over slide: 530 mm Spindle bore: 80 mm Speed: 45 – 4,500 rpm 2 tool turrets A-turret: 12 tool positions B-turret: 8 tool positions Driven tool stations Tailstock Chip conveyor

Year of construction: 1998, Condition: ready for operation (used), Control Unit Brand Okuma Model OSP 7000L Turret Kljlewk Rpkjhcdw Ajt Number of turrets 1 Tool taper VDI40 Media Chip conveyor Yes Additional Equipment Robot interface In-process measuring Bar feed HYDRO-SAMECA QS 7.52 with diameter reduction tubes: 53, 46, 40, 34, 27, 22, 17 mm SAMECA bar feeder QUICKSAM 7.52 complete with a basic unit Max. Capacity 52 mm, length 3100 mm, Total length 4900 mm Drum with guide tubes capacities: 16, 20, 26, 32, 38, 45, 52 mm Hydraulic unit Capacity 80 liters With tailstock Control Unit Brand Okuma Model OSP 7000L Turret Number of turrets 1 Tool taper VDI40 Media Chip conveyor Yes Additional Equipment Robot interface In-process measuring Bar feed HYDRO-SAMECA QS 7.52 with diameter reduction tubes: 53, 46, 40, 34, 27, 22, 17 mm SAMECA bar feeder QUICKSAM 7.52 complete with a basic unit Max. Capacity 52 mm, length 3100 mm, Total length 4900 mm Drum with guide tubes capacities: 16, 20, 26, 32, 38, 45, 52 mm Hydraulic unit Capacity 80 liters With tailstock This Okuma LB15II was manufactured in 1998. It features a 12-position VDI40 turret, chip conveyor, OKUMA OSP 7000L control, and a SAMECA bar feeder. Additionally, it includes a robot interface, in-process measuring, and a programmable workpiece chute. If you are looking to get high-quality turning capabilities, consider the Okuma LB15II machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2000, max. turning diameter 580 mm turning length 1500 mm control OSP 7000 L greates pass round over bed 610 mm swing diameter over slide rest 580 mm Main spindle: turning speed range - main spindle 12 - 2.800 min/-1 spindle bearing diameter 150 mm spindle bore 110 mm spindle nose JIS A2-11 power capacity - main spindel 37 (30) kW C-Axis 0,001 ° axis stroke: x-axis 598 mm y-axis 230 (+110 / -120) mm Kolhcdstqmtrow Aolt z-axis 1.660 mm feeds: rapid traverse X / Y: 12.000 mm/min rapid traverse Z: 20.000 mm/min rapid traverse C: 100 min/-1 cutting feed speed X / Z / Y: 0,001 - 1.000 mm/U turret: type H2 ATC number of toolpositions 2 (1x L-Tool / 1x M-Tool) pos. driven statition stufenlos / stepless Spindle speed - driven tool stations 40 - 3.000 min -1 tool shank height 25 mm Boring bar shank diameter 50 mm Tailstock: diameter of quill 120 mm quill stroke 170 mm taper of center MT 5 tool magazin: number of toolpositions 50 pos. tool taper MAS BT 50 max. tool diameter 170 mm max. tool length 350 mm max. tool weight 20 kg drive of magazin 3,2 kW total power requirement 53 kVA weight of the machine ca. 18,5 t dimensions of the machine ca. 6,0 x 3,2 x 3,0 m CNC - Turning- and MillingCenter OKUMA - MacTurn 50

Year of construction: 1992, Condition: ready for operation (used), Additional Equipment IGF programming system Kljlhcdswk Rq Uew Aet This Okuma LB15-M was manufactured in 1992. It features a RHOM DURO NC chuck Ø 200 mm, capable of speeds up to 4,500 rpm, and a bar capacity of Ø 45 mm by 300 mm length. It includes a manual tailstock and a 12-position motorized turret. If you are looking to get high quality turning capabilities consider the Okuma LB15-M machine we have for sale. Contact us for more information. Application Types Turning