Used Okuma Lb 300 M for sale (192)

Condition: used, Year of construction: 2006, operating hours: 4,382 h, functionality: fully functional, machine/vehicle number: 127611, turning diameter over cross slide: 340 mm, turning length: 480 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 1,500 W, Equipment: rotational speed infinitely variable, EQUIPMENT - Hydraulic tailstock - Bar feeder 1000 mm TECHNICAL DETAILS Swing diameter over bed: 530 mm Swing diameter over longitudinal slide: 530 mm Swing diameter over cross slide: 410 mm Turning length: 480 mm Turning diameter: 340 mm Iodpfx Ahoxl Udre Noal Spindle speed: 4,500 rpm Spindle Spindle nose type: JIS A2-6 Taper bore: Ø70 (2.75") x 1/10 mm Spindle bore: 62 mm Spindle speed range: 38 - 4,500 rpm Longitudinal slide (Z-axis) Travel: 500 mm Feed rate: 0.001 - 1,000 mm/rev Rapid traverse: 25,000 mm/min Cross slide (X-axis) Travel: 280 mm [70 + 210] Feed rate: 0.001 - 1,000 mm/rev Rapid traverse: 20,000 mm/min Turret Type: V12 Number of tools: 12 (turning or driven tools) Tool size (external turning tools): 25 x 25 mm Tool size (internal turning tools): 40 mm C-axis Control angle: 360° (increment: 0.001°) Rapid traverse: 200°/min Tailstock & Motors Tailstock quill diameter: 90 mm Tailstock quill travel: 120 mm Main spindle motor: 15/11 kW (20 min / continuous duty) Longitudinal feed motor (Z-axis): 6 kW Cross feed motor (X-axis): 4 kW MACHINE DETAILS Machine height: 2,200 mm Footprint: 2,200 x 1,720 mm Weight: 5,200 kg EQUIPMENT - Hydraulic tailstock - Bar feeder 1000 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,810 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Y-axis: 1,144 mm, rotational speed (max.): 4,500 rpm, TECHNICAL DETAILS Ijdpfxjx Exqfo Ah Neal Turning length: 1,000 mm Turning diameter: 300 mm Spindle bore: 68 mm X-axis travel: 235 mm Z-axis travel: 1,144 mm Turret: 12 stations – all driven Spindle speed: 45 – 4,500 rpm Tool holder: VDI 40 MACHINE DETAILS Power-on time: 33,509 h NC run time: 10,810 h Spindle run time: 9,643 h Control: OSP P300L-R Weight: 6,300 kg Required footprint: 3.55 m x 2.35 m x 1.93 m EQUIPMENT Chip conveyor Chuck (diameter: 250 mm) Touch setter Tailstock

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 100277, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 280 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 500 mm, TECHNICAL DETAILS X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360° (0.0001°) Spindle speed: 4,500 rpm Spindle bore: 62 mm Chuck diameter: 10 inches MACHINE DETAILS Control: OSP U 100 L Weight: 6,000 kg Iodpfxox I Axre Ah Neal EQUIPMENT Driven tools Chip conveyor Transformer Manuals

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 2620 mm Measurements depth 4865 mm Machine weight 11700 kg Control Unit Brand OKUMA Model n/a Main Drive Spindle speed range 3500 Tool taper ASA 8 Number of axis 2 Movement X-Axis Movement 230 mm Iodpfxjx D R Rfe Ah Noal Z-Axis Movement 670 mm Turret Tool taper VDI 40 This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, turning diameter 530 mm turning length 500 mm control OSP 700 L-G Description of features Machine type CNC lathe with milling unit (C-axis + driven tools) Machining axes X, Z and C-axis (C for rotating workpiece) Tool turret 8-12 stations, with driven tools Turning diameter above the bed: 530mm Turning diameter above the slide: 530mm Turning diameter above the cross slide: 340mm Centre distance: 500mm Spindle speed approx. 50 - 3500 rpm Driven tools For drilling, milling, thread cutting on the workpiece circumferential surface C-axis Enables positioning in angular degrees (e.g. milling on circumference) Spindle bore approx. 50 mm Machine weight: approx. 5080kg Isdpfxewugr Aj Ah Noal All data without guarantee. This information is for guidance only. For further information, please contact . Translated with (free version)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 135667, turning diameter: 280 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, controller model: OKUMA OSP-T200L, workpiece length (max.): 200 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm X-axis travel: 210 mm Y-axis travel: 330 mm C-axis travel (indexing): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool stations in turret: 12 MACHINE DETAILS Control: OKUMA OSP-T200L Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 mm Isdexnlh Tjpfx Ah Nsal Weight: 6,500 kg EQUIPMENT Feeder belt Three pallets Note: The tool holders and tools visible in the working area are not included in the scope of delivery or sale. Any oil mist extraction unit or pallets shown on the feeder belt in the photos are also not included in the sale or delivery.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 105885, turning length: 600 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 640 mm, turning diameter over bed slide: 530 mm, TECHNICAL DETAILS Swing diameter over bed: 530 mm Swing diameter over cross slide: 380 mm Distance between centers: 600 mm Max turning length: 600 mm Number of controlled axes: 4 X-Axis Travel: 260 mm Rapid traverse: 20,000 mm/min Z-Axis Iedjxdcxzspfx Ah Neal Travel: 640 mm Rapid traverse: 25,000 mm/min Spindle Spindle diameter: 100 mm Spindle speed: 45 – 5,000 rpm Tools External turning tools: 25 × 25 mm Internal turning tool diameter: 40 mm Tool stations: 20 Driven tools Spindle speed: 45 – 4,500 rpm C-Axis Control angle: 360° Rapid traverse: 200 rpm MACHINE DETAILS Control: OSPU 100L Dimensions & Weight Dimensions (L x W x H): 2,950 × 2,050 x 2,010 mm Operating hours Spindle hours: 30,000 h Machine hours: 86,000 h EQUIPMENT Forkardt swing chuck Chip conveyor

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Iaodpfx Ahjku Aaao Nol Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Iaedjwmdv Nspfx Ah Nel

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 5746-01-358509.3, turning diameter: 280 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 330 mm, controller model: OKUMA OSP-U100L, workpiece length (max.): 200 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Submitting a bid obligates you to collect the machine on time between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Swing diameter over bed: 320 mm Max. turning diameter: 280 mm Max. workpiece length: 200 mm Travel X: 210 mm Travel Y: 330 mm C axis (indexing): 360° Spindle speed: 40–4,000 rpm Spindle bore: 62 mm Number of tool positions in turret: 12 Iasdpsxnlfrefx Ah Njl MACHINE DETAILS Control: OKUMA OSP-U100L Length of feeder conveyor: approx. 3,500 mm Dimensions & Weight Dimensions (L x W x H): 5,000 x 1,500 x 2,400 mm Weight: 6,500 kg EQUIPMENT Turret can accommodate driven tools Feeder conveyor Three pallets Note: The toolholders and tools visible in the working area, as well as the chuck, are not included in the scope of sale and delivery. Any oil mist extractor and pallets on the feeder conveyor visible in the photos are also not included in the scope of sale and delivery.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 6,200 kg, controller manufacturer: OKUMA, controller model: OSP P200-L, number of axes: 2, This 4-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information. Additional equipment • Spindle oil chiller included • Side chip conveyor (hinged belt type) • Double foot pedal for chuck and tailstock control • Includes transformer, manuals, parts list, and schematics Machine Benefits Technical Machine Benefits • Torque: 620 nm • Spindle nose: a2-8 • Bar capacity: 75 mm • Chuck: 250 mm smw autoblok with quick jaw change Iajdsyaiq Djpfx Ah Nel • Swing diameter: 520 mm • Max turning diameter: 380 mm • Max turning length: 1050 mm • 12-position turret, all driven tools • Turret indexing time: 0. 2 seconds • Equipped with static and driven tool holders Extra Information Tools Automatic tool load monitoring Renishaw automatic tool measurement arm Driven tools motor: 5.5 kW Driven tool speed: up to 4000 rpm Currently in operation

Condition: excellent (used), Year of construction: 2010, turning length: 995 mm, spindle bore: 80 mm, Max. turning Ø: 530mm Ijdpox I Nbtefx Ah Neal X-Axis: 260mm Z-Axis: 995mm Spindle bore: 80mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:6000Rpm Subspindle bore: 62mm Subspindle power:11kW ATC / revolver: 12 Speed live tools:6000Rpm Tool eye: yes Hours: 2800H Length: 3000mm Width: 1800mm Height: 1900mm Weight: 6350kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Okuma LB 3000 MY. * Included equipment value: 20,000–24,000 euros. * 4-axis machine. * Fully independent tailstock, programmable in Z-axis movement and locking via M codes. * 12-station turret, all stations live (motorized). * C-axis. * Y-axis. * Main spindle with built-in motor, 18.5 / 22 kW. * Motor for driven tools: 5.5 kW. * Spindle start-up torque: 620 N·m. * Integrated motor, direct drive without belts or gear steps. * Main spindle nose: A2-8. * Tailstock Morse taper: MT5. * Bar capacity: 75 mm. * Spindle chuck: Kitagawa B-210. * Hardened box ways on all axes. * Main spindle speed: 4,200 rpm. * Driven tool speed: 4,000 rpm. * Swing diameter: 520 mm. * Max turned diameter: 380 mm. * Max turning length: 1,050 mm. * Headstock oil chiller. * IGF OSP P200-L conversational automatic programming system. * Automatic load monitoring and tool consumption monitoring. * Parameterized automatic tool collision avoidance system. * Tool life management and monitoring system. * Rapid traverse speed: 20 and 25 m/min on X and Z axes. Iaodpex Nf Ekofx Ah Nsl * Turret index time: 0.2 seconds. * Renishaw automatic tool measurement arm. * Communication ports: USB, PCMCIA card, and RS 232. * Dual pedal for main chuck and tailstock open/close. * Side chip conveyor, hinged type. * Complete set of external and internal static toolholders. * Complete set of axial and radial driven toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operation manuals. * Weight: 6,200 kg. * Machine currently in operation. * Immediate delivery subject to prior sale.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,412 h, functionality: fully functional, turning length: 1,000 mm, turning diameter: 300 mm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, controller model: OSP P300L-R, TECHNICAL DETAILS X-axis travel: 235 mm Z-axis travel: 1,144 mm Turning length: 1,000 mm Turning diameter: 300 mm Swing over bed: 450 mm Turret: 12 positions – all driven Spindle speed: 45 – 4,500 rpm Spindle bore: 68 mm Tool holder: VDI 40 Isdpfx Aoxxi Uloh Noal MACHINE DETAILS Control: OSP P300L-R Weight: 6,600 kg Operating hours: 24,412 h EQUIPMENT Chip conveyor Chuck diameter 250 mm Touch setter Tailstock

Condition: good (used), Year of construction: 1998, functionality: fully functional, Controller OSP700L Swing dia 300 mm Turning dia 170 mm Between centers 340 mm X travel 150 mm Z travel 350 mm C axis 360/0,001 degree Spindle hole D42 mm Chuck dia 200 mm Turret 12-fold Tool holder type VDI30 Spindle speed 50 - 6000 rpm Spindle power 5,5/7,5 kW Power required 400V, 15 kVA Weight 3500 kg Dimensions LxWxH = 2300 x 1635 x 1850 mm Accessories - C axis and live tool turret - Hydraulic tailstock Iodjvmzc Uepfx Ah Neal - Coolant unit - Chip conveyor - Hydraulic 3 jaws, D160 mm chuck - Machine light Good condition, still under power.

Condition: good (used), Year of construction: 2018, operating hours: 6,177 h, functionality: fully functional, machine/vehicle number: L3M0060, turning length: 450 mm, turning diameter: 300 mm, rotational speed (max.): 4,500 rpm, bar diameter (max.): 69 mm, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. swing diameter: 520 mm Max. turning length: 450 mm Main spindle Bar capacity: 69 mm Spindle nose: ASA8 Spindle motor power: 22 kW Spindle speed: 20 / 42 m/min Spindle chuck diameter: 10″ Driven tools Power: 7 kW Speed: 4,500 rpm Tailstock Tailstock taper: MT5, rotating MACHINE DETAILS Power-on time: 8,666 h Spindle hours: 6,167 h CNC control: CNC OSP P300LA-e (15″) Weight: 5,000 kg Ijdpfx Ahoww Ikxo Nsal Connected load: 28.6 kVA Total power-on time: 16,620 h CNC control operation time: 8,667 h Spindle run time: 6,177 h Cutting time: 6,004 h EQUIPMENT - Manual presetting device - Roller-type chip conveyor - Rotating MT5 tailstock - High-speed driven tools - CNC control with large 15″ screen

Condition: ready for operation (used), Year of construction: 2011, Main Drive Iajdsx Imqfopfx Ah Nel Number of axis 3 Spindle Speed 5000 RPM Spindle motor power 22 kW Movement X-Axis Movement 260 mm Z-Axis Movement 1010 mm Y-Axis Movement 120 mm Technical Specification Driven Tools yes This 3-axis Okuma LB 3000 EX turn-mill centre was manufactured in 2011. It features a maximum turning diameter of 340 mm, a turning length of 950 mm, and a spindle speed up to 5,000 rpm. The machine includes a 12-position tool turret and supports driven tool speeds up to 6,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the Okuma LB 3000 EX machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Iedpfjwq Rpwex Ah Neal Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 6850 kg Control Unit Brand OKUMA Model OSP-P300LA Main Drive Number of spindles 2 Spindle bore 120 mm Number of axis 5 Movement X-Axis Movement 260 mm Iasdex D Rvnspfx Ah Nsl Y-Axis Movement 115 mm W-Axis Movement 895 mm Workpiece Workpiece drm over bed 580 mm Workpiece drm over support 470 mm Turret Rotating tools Yes This 3-axis Okuma LB 3000 EX II was manufactured in 2022, featuring a robust horizontal turning capability. It includes an Iemca KID 80 bar feeder, a 250 mm SMW chuck, and a 170 mm Kitagawa chuck. With a main spindle motor power of 22 kW and rotational speeds up to 6000 rpm, it ensures efficient turning operations. If you are looking to get high-quality turning capabilities consider the Okuma LB 3000 EX II machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP-P200L This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Isdox D Nf Iopfx Ah Njal Application Types Turning

Year of construction: 2012, operating hours: 6,140 h, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP P200LAR Main Drive Number of axis 3 This 3-axis Okuma L300 E-M was manufactured in 2012. It features live tools and an ASA8 spindle, with a generous distance between points of 1000mm. Ideal for those looking to enhance their horizontal turning capabilities. Contact us for more information about this machine. Application Types Ijdpfx Aox D Imkeh Noal Turning

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,000 h, This 3-axis Okuma LB300-10000 MC was manufactured in 2003. It features a turning diameter of 340 mm, turning length of 1,000 mm, and 12 tool positions. Includes a chip conveyor and has been used in single-shift operations. Consider the opportunity to buy this Okuma LB300-10000 MC horizontal turning machine. Contact us for more information. Iodox Ut H Hepfx Ah Njal • 12 tool positions • Chip conveyor • Single-shift operation • Without tools, fixtures, or clamping devices.

Year of construction: 2008, condition: used, Manufacturer : OKUMA Model: LB3000EX-MYT Voltage: 380V Phase: 3P (3-Phase) Frequency: 50Hz Average Capacity: 35.5 kVA Full Load: 55 A Max Motor Power Consumption: 215 A Interrupt Capacity: 65 kA Diagram Number: W5201-139-756 Ijdpfxeuiq N Ro Ah Nsal Find more here - Contact us at -

Condition: good (used), Year of construction: 2012, Datasheet: Travels: Turning length: 1,000 mm Turning diameter: 360 mm Isdpfx Asq Dpuzsh Nsal X-axis: 260 mm Z-axis: 1,000 mm C-axis: 0.001 degrees Spindle machining diameter: 410 mm Swing over bed: 580 mm Main spindle: Cross section: 80 mm Spindle drive: 22 kW Spindle speed: 5,000 rpm Torque: 427 Nm Weight and dimensions: 6,000 kg LxWxH: 3,000x1,800x2,3000 mm Touchsetter NC tailstock 12-position turret with driven tools Kitagawa B210 chuck Mayfran chip conveyor 8 bar coolant pump

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 109566, turning length: 480 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, spindle diameter: 100 mm, Machine with a large V12 turret for L- or M-sized tools and a hydraulic tailstock. TECHNICAL DETAILS Swivel diameter over bed: 530 mm Swivel diameter over longitudinal slide: 530 mm Swivel diameter over cross slide: 410 mm Iodpsv I Tkaefx Ah Neal Number of controllable axes: 4 Turning length: 480 mm Turning diameter: 340 mm Speed: 4,500 rpm Spindle diameter: 100 mm Spindle Spindle diameter: 100 mm Spindle head type: JIS A2-6 Taper bore: Ø70 (2.75) x 1/10 mm Spindle bore: 62 mm Spindle speed: 38 - 4,500 rpm Longitudinal slide (Z-axis) Axis stroke: 500 mm Feed: 0.001 - 1,000 mm/rev Rapid traverse: 25,000 mm/min Cross slide (X-axis) Axis travel: 280 mm [70 + 210] Feed: 0.001 - 1,000 mm/rev Rapid traverse: 20,000 mm/min Y-axis Axis travel: +70 to -50 mm Feed: 0.001 - 1,000 mm/rev Rapid traverse: 10,000 mm/min Turret Type: V12 Number of tools: 12 (L or M tools) Tool size (external turning tools): 25 x 25 mm Tool size (internal turning tools): 40 mm C-axis Control angle: 360° (increment: 0.001°) Rapid traverse: 200 °/min Tailstock & Motor Tailstock spindle diameter: 90 mm Tailstock spindle stroke: 120 mm Spindle drive motor: 15/11 kW (20 min/continuous operation) Longitudinal slide feed (Z-axis): 6 kW Cross slide feed (X-axis): 4 kW MACHINE DETAILS Machine height: 2,200 mm Floor area: 2,200 x 1,720 mm Weight: 5,200 kg EQUIPMENT - Hydraulic tailstock