Used Okuma Lc 20 for sale (223)

Condition: ready for operation (used), A CNC slant bed lathe Okuma is available. Chuck diameter: 200mm, swing diameter: 400mm, turning diameter: 300mm, turning length: 470mm, tool stations: 8. Machine dimensions X/Y/Z: approx. 4000mm/2150mm/2150mm, weight: approx. 5500kg, control: OSP 3000 L. Documentation available. An on site inspection is possible. Djdeyttwzopfx Ab Tekp

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC-Steuerung Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Djdpfxezkpu Ne Ab Tjkp Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: used, OKUMA BLUSHLESS SERVOMOTOR DRIVE UNIT BL-120E-20 Djdpfx Ajy Suw Usb Tskp

Condition: like new (used), Year of construction: 2022, operating hours: 1,325 h, functionality: fully functional, Control unit: OKUMA OSP P300LA-e Swing over bed: D450 mm Swing over cross slide: D350 mm Max. turning diameter: 230 mm Max. turning length: 500 mm X-axis travel: 165 mm Z-axis travel: 470 mm Dkedpfx Asziqp Sob Tsp Max. spindle speed: 5,000 RPM Drive capacity: 15 / 11 kW (20 min. / continuous) Spindle bore: D62 mm Turret: 12-station Max. tool size: 25x25 mm Tailstock quill taper: MT5 Weight approx.: 3800 kg Dimensions (LxWxH): 2600 x 1830 x 1700 mm Accessories and Equipment - Coolant system - Chip conveyor - 3-jaw chuck D250 mm - Built-in tool presetter arm - Foot pedals - Machine leveling feet - Manuals The machine has very low operating hours and is in like-new condition. Under power in our showroom.

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Dkodpfxezimu Do Ab Tep Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: used, Year of construction: 2004, functionality: fully functional, Max turning diam 720mm, max lenght 2,000mm, 12-2,800Rpm, Spindle bore 110mm, XA 660mm, XB 230mm, ZA 2.215mm, Y 250mm, ZB 2,100, B-axis 0.001dg, BT 50 Big Plus, 40-5,000Rpm, Lower turret VDI V12, Tail Stock MT5. Helix and Hobbing function, OSP E100L, Portal loder, weight 28.000kg. Delivery September 2026. Djdpfxozimqxe Ab Tskp

Condition: good (used), Year of construction: 2005, functionality: fully functional, turning length: 700 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, overall weight: 7,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Max.: 210 mm Bench turning diameter: 400 mm Max. machinable length: 700 mm X/Z travel: 192/700 mm Stroke against spindle (W-axis): 730 mm C-axis: 0.001° Rapid traverse X/Z: 30/32 m/min Main spindle speed: 5000 rpm Motor: 11/7.5 kW 2 turrets: 12 stations Machine dimensions: 2700 x 2000 x 1980 mm Machine weight: 7000 kg Equipment: Dkedpfx Abszhwnre Tsp 2 turrets, 12 stations, VDI 30 Measuring tool IRCO SiMag

Condition: used, Year of construction: 2022, Type: CNC lathe Manufacturer: OKUMA Model: GENOS L2000-e Year of Manufacture: 2022 Dksdpfx Aszc I Aqeb Tjp Serial Number: L2E0253 Condition: Used

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 550 mm, spindle motor power: 11,000 W, controller manufacturer: OKUMA, number of axes: 5, This 5-axis Okuma LB2000EX II was manufactured in 2013. It features a maximum turning diameter of 360 mm and a turning length of 500 mm. The machine includes a robust turret with 12 stations and a main spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB2000EX II horizontal turning machine we have for sale. Contact us for further details. • Maximum turning diameter: 360 mm • Maximum turning length: 500 mm • Maximum bar capacity: 62 mm • W-axis travel: 500 mm • C-axis indexing: 0.001° • Main spindle nose: ASA 6" • Sub-spindle maximum speed: 6,000 rpm • Sub-spindle motor power: 11 / 7.5 kW • Turret stations: 12 • Driven tool speed range: 45–6,000 rpm • Driven tool motor power: 5.5 / 3.7 kW • Turning tool size: 20 × 20 mm • Boring bar capacity: Ø32 mm Additional equipment • Bar feeder: TOP XF365 (YOM 10/2013, installed 2014) • Hinge-type chip conveyor • Manual tool setter (presetting) • Parts catcher Technical Specification Dksdpfxjzcphus Ab Tep Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 1998, Used CNC turning lathe by Okuma Type: LCS 15 Includes tool holder Turning length: 280 mm Turning diameter: 270 mm Tool changer Dkodpfxey U Iz Sj Ab Top Year of manufacture: 1998 Excluding bar feeder and chip extraction system.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 280 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 320 mm, controller model: OSP 700L, TECHNICAL DETAILS Dkodpfey S S Hgjx Ab Tep Maximum turning length: 280 mm X-axis travel: 155 mm Z-axis travel: 320 mm Spindle speed: 4,200 rpm MACHINE DETAILS Control system: OSP 700L Turret: V12, direct mounting EQUIPMENT Chip conveyor Touch probe Coolant pump Parts collector Collet chuck

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Dkedpfxey R A N As Ab Tep Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Dsdpfx Aoyn Em Rsb Tjkp Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2011, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 380 mm, controller manufacturer: OKUMA, controller model: OSP‑P200LA‑R, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2011. It features a maximum turning diameter of 200 mm and a Z-axis travel of 380 mm. The machine is equipped with a 12-station turret with driven tools, allowing for milling and drilling on the C-axis. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning center we have for sale. Contact us for further details. • Turning configuration: 2 axes (X, Z) + C‑axis; no Y‑axis • Tailstock: Equipped • Tool presetter: Automatic tool presetter installed • Turret: 12‑station turret with driven tools (milling and drilling on C‑axis) • Max. turning diameter: 200 mm • Spindle nose: ASA A2‑6 • Spindle bore diameter: approx. 50 mm Dksdpfx Abey Rrwvj Top • Electrical supply: 380 V, 3‑phase, 50/60 Hz • Average apparent power: 17.7 kVA • Full‑load current: 26.7 A • Max. motor current draw: 45 A Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2012, functionality: fully functional, 1 OKUMA CNC Lathe Model LT2000EX-2M1Y with OSPP200LA CNC Controller Including CE mark 1 set 〈European Standard Specification〉 1-1 Spindle motor VAC 11/7.5 kw (5 min./cont. ) 2 set 1-2 Spindle speed 50 - 6,000 min-1 2 set 1-3 Spindle dia. 62/100 mm, 140 Flat nose 2 set 1-4 C-axis control, 360 degree at 0.001 degree increment 2 set 1-5 Y-axis 95mm (+50 to -45) for upper turret 1 set 1-6 Upper V16 (turning & milling) + Lower V16 (turning & milling) Radial turret (No tool holder included) 1 set 1-7 Rotary tool drive motor, PREX 5.5/3.7kw (2 min/count) 2 set 1-8 Rotary spindle speed 45-6,000 min-1 2 set 1-9 Coolant supply system, 0.8kw x 3 sets pump motor 1 set 1-10 Work light, fluorescent lamp 1 set 1-11 Totally enclosed guard 1 set 1-12 Door interlock 1 set 1-13 Chip pan, side chip disposal type 1 set 1-14 Foundation washers and leveling jack screws 1 set 1-15 Machine lifting hooks 1 set 1-16 Chuck auto open / close with confirmation 2 set 1-17 Chuck air blower 2 set 1-18 Lubrication monitor B-1 1 set 1-19 CE mark and EMC 1 set 1-20 Application for IEC standard 1 set 1-21 Double chuck operation pedal 2 set 1-22 Synchronized tapping (for LT2000EX-M) for Milling rotary tool 1 set 1-23 OSP-P200LA CNC Controller with 15" colour display, touch panel 1 set 1-24 OSP-P200LA 3D-M-E kit specifications 1 set *Multitasking machines Coordinate conversion (1 set) *Multitasking machines Profile generation (1 set) *Program storage Standard: 2GB (1 set) *Operation buffer Standard: 2MB (1 set) *Real 3D simulation (1 set) Dkedpfxoy Rnbds Ab Top *Cycle time over check (1 set) *Load monitor (spindle, feed axis) (1 set) *NC operation monitor (incl. counter and monitoring function) (1 set) *Cycle time reduction function (1 set) *Variable spindle speed control (1 set) 1-25 Pitch error compensation X + Ys + Z 1 set 1-26 Inch / metric switchable function 1 set 1-27 Workpiece jump out detection 1 set 1-28 Status indicator lamp (2-layer lamp) instead of status indicator in 3D-E kit 1 set 1-29 Electrical power source application to suite local power source at each countries (CE transformer) 1 set 1-30 Chuck open/close during spindle rotation (LT-Standard) 1 set 1-set of tools - see last photo

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. control Okuma OSP turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t +++++ Dodpfx Absh D Anaj Tokp Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 4,500 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 11,000 W, total height: 1,569 mm, overall weight: 3,800 kg, controller manufacturer: OKUMA, controller model: OSP P200 L, number of axes: 3, This 3-axis Okuma GENOS L200E-M was manufactured in 2010. It features a maximum turning diameter of 200 mm and a turning length of 380 mm. The machine is equipped with a spindle speed of 4,500 rpm and a main spindle power of 11 kW. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L200E-M horizontal turning machine we have for sale. Contact us for further details. • Max swing over covers: 450 mm • Max turning diameter: 200 mm • Max turning length: 380 mm • Spindle nose: ASA A2-6 • Front bearing diameter: 100 mm • Spindle bore: 62 mm • Bar capacity: 50 mm • Rapid traverse (X/Z): 20–25 m/min • Tailstock taper: MT No. 5 • Tailstock quill stroke: 100 mm Djdjy A I Stepfx Ab Tekp • Turret type: VDI-30 V12 • Indexing time (1 position): 0.1 sec • OD tool size: 20 x 20 mm • ID tool size: 32 mm • Live tool speed: 6,000 rpm • Live tool power: 4.0 / 1.8 kW • Floor space: 2.081 x 1.550 m • Total power on time: 23,498 hours • Operating time: 6,490 hours • Cutting time: 5,278 hours Additional equipment • Static tool holder kit included Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2022, machine/vehicle number: L2E0253, CNC lathe Dsdpfjy Axr Rox Ab Tskp

Condition: new, Year of construction: 2018, functionality: fully functional, Standard technical data: Swing diameter over bed: 580 mm Swing diameter over carriage: 470 mm Maximum machinable diameter: 360 mm Max. workpiece length: 250 mm Traverse (X): 260 mm Traverse (Z): 350 mm Traverse (Y): 100 mm (+/- 50) C axis: 360 degrees (0.001-degree increments) Spindle speed: 50-6,000 rpm Spindle nose: JIS A2-6 Spindle bore diameter: Ø62 mm Front spindle bearing diameter: Ø100 mm Turret type: M-V12 Number of tools: 12 Tool size: 20x20 mm Tool shank diameter: Ø32 mm Tool change time: 0.1 sec Driven tool speed: 45-6,000 rpm Rapid traverse (X): 25 m/min Rapid traverse (Z): 30 m/min Rapid traverse (Y): 12.5 m/min Main motor power (15 min/continuous): 11/7.5 kW (PREX) Driven tool motor power: 5.5/3.7 kW (PREX) Machine dimensions (L x W x H): 2,020 x 1,734 x 2,250 mm Machine weight: 4,050 kg Control: OSP P300L Standard specification: 1 OKUMA CNC Lathe Model LB2000 EXII MYC with OSP-P300L CNC Controller, including CE mark & EMC 1 set European Standard Specification 1-1. V12 radial turret head, 1 set 1-2. Spindle, 1 set (1) Spindle speed: 50-6,000 rpm (1 set) (2) Spindle motor PREX 11/7.5 kW (1 set) (3) Spindle: JIS A2-6; bore Ø62 mm (1 set) (4) C-axis control, 360 degrees (0.001-degree increments) (1 set) (5) SR1146 hydraulic cylinder for chuck (1 set) 1-3. MT4 tailstock 1-4. Dual-action foot pedal for chuck and tailstock side, 2 sets 1-5. Driven tool motor PREX 5.5/3.5 kW (2 min continuous) 1 set 1-6. Driven tool speed: 45 - 6,000 rpm, 1 set 1-7. Work area lighting, 1 set 1-8. Full enclosure, 1 set 1-9. Chip tray, 1 set 1-10. Door interlock, 1 set 1-11. Lubrication monitoring, 1 set 1-12. Automatic chuck open/close on main spindle, 1 set 1-13. Chip air blow, 1 set 1-14. Foundation bolts, 1 set 1-15. Tool setter, 1 set 1-16. CE marking, 1 set 1-17. IEC standard compliance, 1 set 1-18. Transformer, 1 set 1-19. Coolant system with 250W pump, 1 set 1-20. OSP-P300L CNC control with 15" color touchscreen monitor, 1 set 1-21. OSP-P300L Advanced One Touch IGF-M-E kit specification (1 set) * Multitasking machines coordinate conversion (1 set) * Multitasking machines profile generation (1 set) * Advanced One Touch IGF (graphical programming assistant with dialogue-based interface) (1 set) * Real 3D simulation (1 set) * Cycle time monitoring (1 set) * Load monitor (1 set) * NC operation monitor (1 set) * Cycle time reduction function (1 set) * Hi-Cut Pro (machining-specific servo optimization) (1 set) Djdpoy H H Afefx Ab Tskp * Variable spindle speed control (1 set) 1-22. 2-stage position indicator lamp, 1 set 1-23. Program storage: 2GB, 1 set 1-24. Operation memory: 2MB, 1 set 1-25. Spindle orientation, electric, 1 set 1-26. Inch/metric conversion, 1 set 1-27. Ball screw pitch error compensation on X/Z axes, 1 set 1-28. Workpiece ejection monitoring, 1 set 1-29. Lifting hooks, 1 set 1-33. TAS-C thermal compensation on the frame 6” chuck Chip conveyor

Condition: used, OKUMA LB 200 M is a CNC turning lathe for high‑precision machining, accuracy and reliable operation. Capacities: turning Ø over cross‑slide 420 mm; swing over bed 530 mm; spindle hole 53 mm; max Ø 300 mm; travels Z 335 mm, X 180 mm. Specs: rapid traverse X 25 m/min, Z 30 m/min; spindle speeds 50–6000 t/min; 3x400 V 50 Hz; total power 16 kVA; weight ≈3300 kg; dims 2035×1720×1700 mm. Equipment: 12‑position fixed‑tool turret; tailstock Morse 4, spindle stroke 80 mm, Ø 55 mm. Enables tight tolerances; typical sectors: automotive, aerospace, medical, machine building. Dksdpfx Aeyxnxxjb Tep

Condition: used, OKUMA LB 2000 EX is a CNC turning lathe designed for precision, high accuracy and reliability. Capacities: spindle hole 62 mm; max turning length 300 mm; max turning diameter 430 mm; travels Z 350 mm, X 260 mm. Specs: rapid traverse Z 30 m/min, X 25 m/min; stepless spindle 50–6000 t/min; power 50 Hz 3x 400 V; weight ≈3250 kg; dimensions L1900×W1750×H1850 mm. Equipment: 12-position turret. Capable of tight tolerances; typical applications: automotive, aerospace, medical, watchmaking, machine tools. Dkedeyxnxfopfx Ab Tep

Condition: good (used), Year of construction: 1998, functionality: fully functional, OKUMA LCC15, OSP 700L, collet chuck, chip conveyor, coolant pump, touch setter, chip conveyor, parts catcher, V12 turret direct mounting. A very compact and efficient machine for bar stock workpieces. * The LNS bar feeder is included free of charge with the machine, but it is not part of the sale and must be electronically serviced by an LNS technician. Dkodpfx Asyq S E Sjb Tjp

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Dkjdpfevta Sbsx Ab Top Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: excellent (used), Travels: Dedpfeyvy Utox Ab Tskp X-axis: 155 mm Z-axis: 320 mm Swing diameter over bed: 450 mm Swing diameter over carriage (slide): 350 mm Maximum turning diameter: 270 mm Maximum turning length: 500 mm Spindle speed, infinitely variable: 75 – 3500 rpm Spindle motor: 7.5 kW Tool turret: 12 stations Dimensions (L x H x W): 2200 x 1635 x 1670 mm Weight: 3800 kg

Condition: good (used), Year of construction: 2007, Used OKUMA lathe Dedpfov S Svvjx Ab Tjkp - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor - coolant tank - immediately available