Used Okuma Lt 2000 for sale (228)

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm Gjdpeyn Em Rsfx Ak Uskb X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 5-axis CNC turning and milling center Okuma Multus B550-C 2000 Control: OSP-P300SA-H Year of manufacture: 2019 Internal machine number: 71 Travel distances: X-axis: 925 mm Y-axis: 520 mm Z-axis: 2,215 mm Distance between centers: 2,000 mm Turning diameter over bed: 830 mm Spindle bore: 112 mm Tool holder HSK-A100 40-position tool changer Programmable steady rest with hydraulic quill Equipment - Chip conveyor Interlit ISF - Full-stroke cylinder Godpfxozwulys Ak Uokb - 6-jaw power chuck SMW Ø 500 IEP - Manual rinsing gun - Drum – trough filter TMF300/980/20 - IFS filter system IFE 5000 - Robot interface Type E - One Touch IGF - Software for input resolution of 0.1 µm - Software package for simultaneous 5-axis machining VTM-1200YB and VTM-2000YB - In-process measurement with Renishaw measuring probe for X/Z/C axis - Automatic zero point adjustment in the Z-axis of the main spindle - High-precision C-axis - Turning function for NC B-axis - Interpolation turning with the X/C/Z axes

Condition: used, Year of construction: 2012, functionality: fully functional, 1 OKUMA CNC Lathe Model LT2000EX-2M1Y with OSPP200LA CNC Controller Including CE mark 1 set 〈European Standard Specification〉 1-1 Spindle motor VAC 11/7.5 kw (5 min./cont. ) 2 set 1-2 Spindle speed 50 - 6,000 min-1 2 set 1-3 Spindle dia. 62/100 mm, 140 Flat nose 2 set 1-4 C-axis control, 360 degree at 0.001 degree increment 2 set 1-5 Y-axis 95mm (+50 to -45) for upper turret 1 set 1-6 Upper V16 (turning & milling) + Lower V16 (turning & milling) Radial turret (No tool holder included) 1 set 1-7 Rotary tool drive motor, PREX 5.5/3.7kw (2 min/count) 2 set 1-8 Rotary spindle speed 45-6,000 min-1 2 set 1-9 Coolant supply system, 0.8kw x 3 sets pump motor 1 set 1-10 Work light, fluorescent lamp 1 set 1-11 Totally enclosed guard 1 set 1-12 Door interlock 1 set 1-13 Chip pan, side chip disposal type 1 set 1-14 Foundation washers and leveling jack screws 1 set 1-15 Machine lifting hooks 1 set 1-16 Chuck auto open / close with confirmation 2 set 1-17 Chuck air blower 2 set 1-18 Lubrication monitor B-1 1 set 1-19 CE mark and EMC 1 set 1-20 Application for IEC standard 1 set 1-21 Double chuck operation pedal 2 set 1-22 Synchronized tapping (for LT2000EX-M) for Milling rotary tool 1 set 1-23 OSP-P200LA CNC Controller with 15" colour display, touch panel 1 set Godpfxsy Rnbdj Ak Uekb 1-24 OSP-P200LA 3D-M-E kit specifications 1 set *Multitasking machines Coordinate conversion (1 set) *Multitasking machines Profile generation (1 set) *Program storage Standard: 2GB (1 set) *Operation buffer Standard: 2MB (1 set) *Real 3D simulation (1 set) *Cycle time over check (1 set) *Load monitor (spindle, feed axis) (1 set) *NC operation monitor (incl. counter and monitoring function) (1 set) *Cycle time reduction function (1 set) *Variable spindle speed control (1 set) 1-25 Pitch error compensation X + Ys + Z 1 set 1-26 Inch / metric switchable function 1 set 1-27 Workpiece jump out detection 1 set 1-28 Status indicator lamp (2-layer lamp) instead of status indicator in 3D-E kit 1 set 1-29 Electrical power source application to suite local power source at each countries (CE transformer) 1 set 1-30 Chuck open/close during spindle rotation (LT-Standard) 1 set 1-set of tools - see last photo

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit Gsdpfsyvfhdox Ak Uskb - Various accessories

Condition: excellent (used), Year of construction: 2011, CNC Turning and Milling Center Okuma LT 2000 EX – M Control: OSP-P200LA Year of manufacture: 2011 Internal machine no. 23 Swing diameter over bed: 400 mm Distance between centers: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: Z-axis: 700 mm W-axis: 730 mm Gkedpfx Aksyli Akj Usb X-axis: 205 mm C-axis: 360 degrees (0.001) Equipment: 2 tool turrets, each with 16 stations (all stations driven) Touch setter IGF Chip conveyor Bar feeder, 3.00 m Main spindle collet chuck Sub spindle 3-jaw chuck Parts catcher Workpiece removal system Extraction unit Coolant system with high-pressure pump and paper band filter system

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Gjdpfx Aozzwmuek Uokb Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 - including chip conveyor - coolant tank - immediately available Gedpfx Asv S Svvjk Uskb

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA Gsdpfxsv S Su Sj Ak Uskb - Model: LT 200-M TwinStar - Year of manufacture: 2006

Condition: used, Year of construction: 2004, functionality: fully functional, Max turning diam 720mm, max lenght 2,000mm, 12-2,800Rpm, Spindle bore 110mm, XA 660mm, XB 230mm, ZA 2.215mm, Y 250mm, ZB 2,100, B-axis 0.001dg, BT 50 Big Plus, 40-5,000Rpm, Lower turret VDI V12, Tail Stock MT5. Helix and Hobbing function, OSP E100L, Portal loder, weight 28.000kg. Delivery September 2026. Godpfezimqxex Ak Uskb

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 5,000 rpm, travel distance X-axis: 270 mm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, total height: 2,330 mm, overall weight: 10,000 kg, product length (max.): 3,530 mm, number of axes: 5, This 5-axis Okuma LT 300 MY was manufactured in 2021, featuring a max turning diameter of 350 mm and a bar capacity of 65 mm. It supports spindle speeds up to 5,000 RPM and includes a motorized 12-position turret. Ideal for complex turning operations, the machine also offers rapid traverse rates and a substantial distance between centers of 1,200 mm. Consider the opportunity to buy this Okuma LT 300 MY horizontal turning machine. Contact us for more information. • Distance between centers: 1,200 mm • Max turning diameter: 350 mm • Rotating diameter over guards: 550 mm • Spindle / counter-spindle: ASA 8 • Bar capacity: 65 mm • Tailstock / counter-spindle travel (W axis): 940 mm • X axis travel: 270 / 230 mm • Y axis travel: ±60 mm Godpfx Aex Imrisk Uskb • Z axis travel (ZA / ZB): 930 / 920 mm • Rapid traverse (X / Z / W): 30 / 40 / 40 m/min • Rapid traverse Y axis: 26 m/min • Turret: 12 positions, motorized, VDI 40 • Turret indexing time: 0.25 s • Live tooling speed / power: 100–4,500 rpm, 7.0 / 3.3 kW

Condition: excellent (used), OKUMA control system Gkedsyxrggspfx Ak Uob Turning diameter: 650 mm Turning length: 1450 mm For technical specifications, see the photo. The price of the machine includes the accessories shown in the photo.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, CNC turning and milling center Okuma Multus B400 1SC-1500 Control system: OSP-P200L Year of manufacture: 11/2010 Internal machine number: 61 X-axis: 690 mm Y-axis: +115 / -115 = 230 mm Z-axis: 1,545 mm B-axis: up to 225°, positioning in 0.001° C-axis: 360° / 0.001° Turning length: 1,500 mm Turning diameter: 710 mm Spindle bore: 110 mm Tool holder: HSK 63 Tool magazine: 40 positions Equipment: - Chip conveyor - 3-jaw chuck SMW KNCS-N-340-117 - Paper band filter system ISF 540/6670 - One Touch IGF - Tailstock - Touch setter Godjzwl U Sjpfx Ak Ujkb

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC turning and milling center Okuma Multus B300 Control: OSP-P200L Year of manufacture: 2007 Internal machine number: 60 Travel ranges: X-axis 690 mm Y-axis 230 (-115 to +115) mm Z-axis 1,545 mm B-axis 0.001 ° C-axis 360 ° W-axis: 1,550 mm Max. turning diameter: 710 mm Tool holder: HSK 63 Total number of tool positions: 40 Spindle speed: 38 – 3,800 rpm Godpfx Aszwl S Rok Uskb Equipment / Accessories - Chip conveyor - 3-jaw chuck SMW KNCS-N-260-72 - Compact paper band filter system 500 l - One Touch IGF

Condition: excellent (used), Year of construction: 2023, CNC turning and milling center Okuma Multus B300 II Control system: OSP-P 300SA Year of manufacture: 2023 Internal machine number: 32 Travel distances: Turning length: 900 mm Maximum turning diameter: 630 mm X-axis: 580 mm Y-axis: 160 mm (+80/-80 mm) Z-axis: 935 mm B-axis: 225° (-30° / +195°; 0.001° increments) C-axis: 360° Tool holder: HSK-A 63 Total number of tool positions: 40 Spindle speed: 50 – 5,000 rpm Accessories: Chip conveyor NC-controlled tailstock, MT5 Touch probe Gjdpfx Asyk Uhcjk Ujkb High-pressure pump, 40 bar Renishaw probe prepared 3-jaw chuck Kitagawa B212, Ø304 mm

Condition: excellent (used), Year of construction: 2014, CNC turning and milling center Okuma Multus U4000 2SW 1500 Control: OSP-P 300 S-H Year of manufacture: 2014 Godpfx Aksyk Tq Ao Uekb Spindle operating time: approx. 2,050 h Internal machine number: 34 Travel ranges: X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° W-axis: 1,524 mm Turning diameter: 650 mm Turning length: 1,500 mm Tool holder: HSK 63 Total number of tool positions: 40 Accessories: XA and YA axes with direct absolute measuring system (Okuma ABSO-Scale) In-process measurement with Renishaw measuring probe for X/Z axis Measurement in Y-axis including measurement in tilt axis mode Kitagawa B215A11 max. 2,800 rpm Kitagawa B210A8 max. 4,200 rpm Kitagawa F 2596-H01 Ø96 mm hollow clamping cylinder One-Touch IGF Software for multi-function tools Harmonic spindle oscillation Software package for simultaneous 5-axis machining Chip conveyor Coolant tank with high-pressure pump 70 bar

Condition: excellent (used), Year of construction: 2014, CNC turning and milling center Okuma Multus U4000 1SC 1500 BigBore Control: OSP-P 300S Year of manufacture: 2014 Internal machine number: 35 X-axis: 695 mm Y-axis with travel: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° Turning diameter: 650 mm Turning length: 1,500 mm Tool holder: Capto C6 Total number of tool positions: 80 Accessories: NC tailstock Adjustable hydraulic steady rest AX 5 on NC axis Coolant system with strip filter Hydraulic 3-jaw chuck Kitagawa BB 212-11 Automatic touch probe High-pressure coolant IKZ Software option High Cut Pro (High-precision package with Super Nurbs) CAS collision protection system Spindle orientation, main spindle, electric Multitool including turning function for Y-axis Helix function Gkedpfxeyk Ddgs Ak Uob Automatic main power cut-off DNC-DT interface Machining Navi M-i (milling), speed control for minimizing vibrations. One-Touch IGF Chip conveyor

Condition: used, Year of construction: 2001, turning diameter: 210 mm, spindle bore: 53 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 6,000 rpm, overall weight: 6,500 kg, distance table center to spindle nose: 960 mm, OKUMA OSP-U100L control unit, with TOP AUTOMAZIONI XF370 bar feed system. Workholding and tooling are not included. MUST BE PICKED UP BY SEPTEMBER 2026. Gkjdpfx Akezw Nu No Ueb

Condition: used, Year of construction: 2015, functionality: fully functional, Model: OKUMA MULTUS U3000 2SW 1500 (CNC turning and milling center) Control: OKUMA OSP-P300S Turning length: approx. 1,500 mm Max. turning diameter: up to 650 mm Tool system / interface: HSK-A63 Main spindle: Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm (2 gear stages) Spindle nose: Short taper size 6 Spindle front bearing: Ø 120 mm Spindle bore: Ø 80 mm 3. Counter spindle (Okuma motor spindle) Travel: Traversable on the W-axis Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm Spindle nose: Short taper size 6 Spindle front bearing: Ø 100 mm Spindle bore: Ø 62 mm Tool spindle / Milling spindle (Okuma motor spindle) Drive power: 22 kW Torque: 120 Nm Max. speed: 12,000 rpm Tool holder: HSK-A63 Axes & Travel Ranges C-axis: 360° (Indexing / Positioning in 0.001° increments) Y-axis: Stroke +125 mm / -125 mm (Total stroke 250 mm) B-axis: 240° (Indexing / Positioning in 0.001° increments) Gkjdpfxszu I U As Ak Ujb Tool magazine & Turret Tool Magazine (ATC): 120 positions Lower turret: 12 stations with direct mounting system "radial" Turret guides: ZB-axis with cylindrical roller linear guide XB-axis with slide guide Coolant supply / Internal coolant supply (ICS): max. 20 bar (including bag filter) External cooling for tool spindle: max. 8 bar Accessories: Short loader LNS Quick Load Seri O III

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning length: 900 mm, turning diameter: 450 mm, Used Okuma Multus B300-W multi-function CNC lathe including newer Kuka robot 70 kg (1–2 years old), without handling set-up. Gkodpfx Aksyux S Hs Usb

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 1,500 mm, turning diameter: 710 mm, Used Okuma Multus B400W Max. turning diameter Ø 710 mm Turning length 1500 mm Kuka robot 140 kg without handling attachment Gsdpfjyrf T Sox Ak Uekb 2 spindles, 7 axes, loading conveyor - loading station - unloading station - 950 mm swing 12+15" chuck 70 bar high-pressure pump

Condition: good (used), Year of construction: 2005, functionality: fully functional, turning length: 700 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, overall weight: 7,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Max.: 210 mm Bench turning diameter: 400 mm Max. machinable length: 700 mm Gjdpfx Ajzhwnrjk Uekb X/Z travel: 192/700 mm Stroke against spindle (W-axis): 730 mm C-axis: 0.001° Rapid traverse X/Z: 30/32 m/min Main spindle speed: 5000 rpm Motor: 11/7.5 kW 2 turrets: 12 stations Machine dimensions: 2700 x 2000 x 1980 mm Machine weight: 7000 kg Equipment: 2 turrets, 12 stations, VDI 30 Measuring tool IRCO SiMag

Condition: like new (used), Year of construction: 2022, operating hours: 1,325 h, functionality: fully functional, Control unit: OKUMA OSP P300LA-e Swing over bed: D450 mm Swing over cross slide: D350 mm Max. turning diameter: 230 mm Max. turning length: 500 mm X-axis travel: 165 mm Z-axis travel: 470 mm Max. spindle speed: 5,000 RPM Drive capacity: 15 / 11 kW (20 min. / continuous) Spindle bore: D62 mm Turret: 12-station Max. tool size: 25x25 mm Gksdpfx Ajziqp Sjk Uob Tailstock quill taper: MT5 Weight approx.: 3800 kg Dimensions (LxWxH): 2600 x 1830 x 1700 mm Accessories and Equipment - Coolant system - Chip conveyor - 3-jaw chuck D250 mm - Built-in tool presetter arm - Foot pedals - Machine leveling feet - Manuals The machine has very low operating hours and is in like-new condition. Under power in our showroom.

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 550 mm, spindle motor power: 11,000 W, controller manufacturer: OKUMA, number of axes: 5, This 5-axis Okuma LB2000EX II was manufactured in 2013. It features a maximum turning diameter of 360 mm and a turning length of 500 mm. The machine includes a robust turret with 12 stations and a main spindle speed of 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB2000EX II horizontal turning machine we have for sale. Contact us for further details. • Maximum turning diameter: 360 mm • Maximum turning length: 500 mm • Maximum bar capacity: 62 mm • W-axis travel: 500 mm • C-axis indexing: 0.001° • Main spindle nose: ASA 6" • Sub-spindle maximum speed: 6,000 rpm • Sub-spindle motor power: 11 / 7.5 kW • Turret stations: 12 • Driven tool speed range: 45–6,000 rpm • Driven tool motor power: 5.5 / 3.7 kW • Turning tool size: 20 × 20 mm • Boring bar capacity: Ø32 mm Additional equipment • Bar feeder: TOP XF365 (YOM 10/2013, installed 2014) Gsdpfxjzcphuo Ak Uekb • Hinge-type chip conveyor • Manual tool setter (presetting) • Parts catcher Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 710 mm, turning diameter: 710 mm, spindle motor power: 11,000 W, spindle speed (min.): 38 rpm, spindle speed (max.): 3,800 rpm, travel distance X-axis: 690 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,545 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 26 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, spindle nose: JIS A2-8, overall weight: 14,000 kg, tool length: 300 mm, tool weight: 10 g, travel distance W-axis: 1,550 mm, Equipment: documentation/manual, Turn mill center OKUMA Multus B400 TECHNICAL CHARACTERISTICS: CNC control: OSP-P200L Distance between centers: 1500 [mm] Max. cutting diameter: 710 [mm] Height of centers over cariage: 710 [mm] Stroke X axis: 690 [mm] Stroke Y axis: -115 / +115 [mm] Stroke Z axis: 1545 [mm] Stroke W axis: 1550 [mm] B axis indexing precision: 0.001 [°] Milling head max. speed: 6000 [rpm] Max. milling spindle power: 11 [kW] Max. milling spindle torque: 65.7 [Nm] Coolant milling head: HSK-A63 Tool magazine capacity: 40 Max. tool length: 300 [mm] Max. tool diameter: 130 [mm] Max. weight of single tool: 10 [Kg] Rapid traverse rate X axis: 4000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 26000 [mm/min] Rapid traverse rate W axis: 12000 [mm/min] Spindle nose: JIS A2-8 Min. spindle speed: 38 [rpm] Max. spindle speed: 3800 [rpm] Increment C-axis: 0.001 [°] Supply voltage: 400 [V] Weight: 14000 [Kg] INCLUDED EQUIPMENT: 1 × One-Touch IGF software option 1 × ATLING 2-point steady rest, type AX8I-NAOS (Ø85–360 mm) 1 × SMW AUTOBLOK 3-jaw chuck Ø340 mm, type KNCS-N-340-117 1 × Chuck clamping pressure regulator 1 × Parts catcher 1 × NC tailstock 1 × MARPOSS T18 tool probe 1 × Remote electronic handwheel 40 × HSK-63 tool holders 1 × 2-color status signal lamp 1 × Chip conveyor 1 × Coolant tank 1 × Transformer 1 × Complete set of manuals + OKUMA CD Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Gkedpfxeyqx Rzs Ak Uob Machine similar to brands such as Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron, and Biglia. Also includes lathes, mill-turn machines, and milling machines.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 10,500 h, functionality: fully functional, turning diameter: 630 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 935 mm, controller model: Okuma OSP P200L, TECHNICAL DETAILS Swinging diameter over slide: 630 mm Machining diameter: 630 mm Distance between centers: 900 mm Travel of X-axis: 580 mm Travel of Y-axis: 160 mm Travel of Z-axis: 935 mm Travel of W-axis: 1,000 mm Travel of C-axis: 360° Gkedjy S Swxepfx Ak Ueb Travel of B-axis: -30° to 195° Main spindle: 3,800 rpm Counter spindle: 5,000 rpm Milling spindle: 6,000 rpm Rapid traverse rate X-axis: 40,000 mm/min Rapid traverse rate Z-axis: 40,000 mm/min Rapid traverse rate Y-axis: 26,000 mm/min Rapid traverse rate W-axis: 20,000 mm/min Rapid traverse rate C-axis: 200 rpm Rapid traverse rate B-axis: 30 rpm Tool diameter max.: 90 mm Tool diameter without adjacent tools max.: 130 mm Tool length max.: 300 mm Tool weight max.: 10 kg MACHINE DETAILS Number of axes: 6 Control system: Okuma OSP P200L Dimensions & Weight Footprint: 4,340 × 2,050 mm Height: 2,600 mm Weight: 10,300 kg Spindle hours: 10,500 h EQUIPMENT Documentation/Manual Spindle speed infinitely adjustable Marpos tool sensor Chip conveyor & coolant system with small band filter system ATC 60 system HSKA-63 (60 tools)