Used Oil Country Lathe for sale (13,756)

Condition: used, turning diameter over bed 310 mm turning dia. over slide 160 mm control BOSCH CNC ALPHA 2 centre distance 340 mm centre height 148 mm Bjdpfx Aaew Sx Ucefelc spindle tunring speed 3.000 U/min x-axis 220 mm z-axis 400 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Bljdpewz Rifofx Aafoc Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 379082, Single-column vertical turning lathe | Schiess-Froriep 14 DKE 1250 The machine was overhauled in 2015 by Matschuk, recently cleaned and is in good condition. - Table diameter: 1,250 mm - Swing diameter: 1,500 mm - Turning height: 1,250 mm - Siemens control system type 840 Dsl - Tool holder Bodpfx Aeyfurqoafjlc Inspection is possible at any time by prior appointment.

Condition: good (used), Year of construction: 1970, functionality: fully functional, Single Column Vertical Turning Lathe | Froriep DS 14 NC The machine was overhauled in 2009, recently cleaned, and is in good condition. - Table diameter: 1,400 mm - Swing diameter: 1,600 mm - Turning height: 1,500 mm - Siemens control type 840 D - Automatic tool changer - Workpiece weight: 6,500 kg - Vertical slide travel: 1,000 mm - Spindle speed: 10–315 rpm - Feed rate: 3,600 mm/min Inspection is possible at any time by prior arrangement. Bsdpfx Aaeyft S Ajfslc - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Froriep | DS14 | DS14NC

Condition: good (used), Year of construction: 1982, functionality: fully functional, Single-column vertical turning lathe | Dörries VCE 1400 Bljdpfxjyft Nnj Aafjc The machine was overhauled in 2010 by Hering, has recently been cleaned, and is in good condition. - Table diameter: 1,000 mm - Swing diameter: 1,400 mm - Turning height: 1,100 mm - Siemens CNC control type 840 D Shop Turn - Tool changer - X-axis travel: 2,000 mm - Z-axis travel: 700 mm - Slide adjustment: 1,000 mm - Rapid traverse: 6,000 mm/min - Spindle speed: 500 rpm - Handwheel - Total power requirement: 62 kW Inspection possible at any time by appointment. #Tags: Doerries | VCE1400 | Dörries VCE

Condition: good (used), Year of construction: 1963, functionality: fully functional, Single-Column Vertical Turret Lathe | Jungenthal DK 1400 The machine was overhauled in 1996, recently cleaned, and is in good condition. - Faceplate diameter: 1,200 mm - Swing diameter: 1,500 mm - Turning height: 1,300 mm - Cross slide travel: 800 mm - Side slide horizontal traverse: 550 mm - Heidenhain Positip 855 digital readout - New operator panel - Various accessories Bjdpfjyft Ahsx Aafslc Inspection is possible at any time by appointment.

Condition: good (used), Year of construction: 1990, 2 UNITS available CONTROL FANUC 0 CNC Lathe Technical details: Turning diameter 165 mm Turning length 200 mm Control Fanuc 18 TB X-axis 2x 195 mm Z-axis 265 (B 780) mm Bar passage 50 mm C-axis 0,001° Turning speeds: 50-5.000 U/min Tool turret with 12 work positions 2 x12 Turning speeds : 180-3600 U/ min Bljdpod S U Dgefx Aafec Accessories: Chip conveyor

Condition: excellent (used), Steadies for lathe VDF BOEHRINGER Type: V 800 Bledoyfny Uopfx Aafjc 1. Fixed steady 1. Travelling steady In very good condition.

Condition: used, Year of construction: 2003, Technical data: Swing diameter: 680 mm Distance between centers: 1000 mm Speed: 2800 rpm Chuck: ø300 mm Bsdsyfnqgspfx Aafslc Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-position turret VDM 40 - C-axis

Condition: ready for operation (used), Lead and feed screw lathe Manufacturer: VDF Model: MA22 Max. turning length: approx. 1000 mm Centre height: approx. 150 mm Spindle bore diameter: 60 mm With 3-jaw chuck, manufacturer FORKARDT, diameter: 200 mm Coolant system and Multifix quick-change toolpost Bledoyfnabopfx Aafjc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 4480, turning diameter over cross slide: 570 mm, turning length: 1,500 mm, Cycle lathe Seiger SLZ 570E Year of manufacture: 2008 Blodpfjyfm R Sex Aafoc Accessories

Condition: as good as new (ex-display), The Numturn 500/1500 FA is a precision CNC Flat Bed Lathe designed for a wide range of applications, making it an excellent choice for the CNC Flat Bed Lathes category. With a robust construction featuring heavy ribbing of the machine frame and wide hardened V-guides, this lathe is engineered for heavy-duty machining. The Fagor 8055i control enhances your workshop programming experience, while the automatic 8-station servo-driven tool turret significantly increases productivity and flexibility for both single part and small batch production of larger workpieces. Its hydraulic power chuck offers adjustable holding force, and the heavy-duty tailstock provides high clamping force for secure machining. The completely lockable enclosure and smart central lubrication system contribute to a low-maintenance operation, allowing for more efficient workflows. KNUTH leads the way in reliability and performance, so if you're looking for a CNC Flat Bed Lathe that delivers robust construction and precise functionalities, you can request a quote today. Bsdpfx Aom E Ty Njafslc

Year of construction: 2024, operating hours: 1,400 h, condition: ready for operation (used), - USED - 4-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 910 mm MAX ROTATING DIAMETER: 800 mm MAX TURNING DIAMETER: 420 mm BAR CAPACITY: 75 mm SPINDLE: 3500 rpm; 15-22 kW; ASA A2-8" X-AXIS TRAVEL: 350 mm Y-AXIS TRAVEL: ± 55 mm Z-AXIS TRAVEL: 750 mm RAPID FEEDS X-Z: 24 - 18 m/min DRIVEN TURRET HEAD: 12 ; BMT65 POS; 6000 rpm; 5,5-11 kW HIGH PRESSURE COOLANT: 20 Bar CONTROL UNIT: FANUC 0i-TF Bsdpfx Asyfivwjafelc WEIGHT: 7300 Kg OVERALL DIMENSIONS: 4526 x 2152 x 2335 mm ACCESSORIES: AUTOMATIC TAILSTOCK ; SWARF CONVEYOR ; FANUC MANUAL GUIDE-I ; ETHERNET PORT ; USB PORT ; TOOL SETTER ; PORTABLE HANDWHEEL

Condition: used, Year of construction: 2023, gebraucht 2023 1675 prompt, Zwischenverkauf v Bulgarien 17600 € 1 325 mm 1000 mm 165 mm 32 mm Bledpfxowirwye Aafoc 190 mm 200 mm 5 4,5 M 12 85 - 2.000 1/min 48 0.006 - 1.77 mm/U 0.003 - 0.885 mm/U 0.1 - 28 mm 75 - 2,5 Gänge/" 0.1 - 1.75 150 mm 95 mm 40 mm 3 MK 100 mm 2.2 kW 2150 mm 950 mm 1350 mm 770 kg demo machine / mint condition net price (price for new machine € 21.690,00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" incl. following optional equipment: 1 lenght stop FURTHER TURNING LENGTHS ON REQUEST

Condition: excellent (used), Year of construction: 1972, turning diameter 175 mm turning length 750 mm swing diameter over bed slide 350 mm total power requirement 4 kW Blsdpfjyfh Nijx Aafoc weight of the machine ca. 1,2 t

Condition: ready for operation (used), functionality: fully functional, MACHINE IN STOCK – READY FOR IMMEDIATE DELIVERY Bodpfx Aoygx Skoafelc

Condition: used, Year of construction: 2006, Technical details: turning diameter: 360 mm turning length: 1000 mm total power requirement: 5,5 kW centre height: 180 mm swing diameter over longit. slide guides: 335 mm max. turning dia. over cross-slide: 198 mm bed width: 250 mm main spindle bore: 42 mm Blodpsyfg Udjfx Aafec spindle turning speed range: 1-4000 U/min Tailstock diameter: 58 mm Morse taper tailstock: MK 3

Condition: ready for operation (used), Year of construction: 2011, CNC lathe with dual spindle MW Series Bledpfsygxbrjx Aafsc MURATEC MW120, used, operational and ready for use. Year 2011. Technical specifications: Chuck size: STD: 165 mm - OTP: 210 mm. Tooling: Turret x 2 Number of tools: 8 x 2 Spindle nose: JIS A2-5 Max spindle speed: 6,000 rpm Spindle AC motor: STD: 7.5 kW/30 min x 2 - OP: 11 kW/30 min x 2 Number of gantry loaders: 1 Gross weight with loader: 4,500 kg.

Condition: ready for operation (used), Year of construction: 2013, Double-spindle CNC lathe MW Series MURATEC MW120, used, functional and ready for operation. Bedpeygxa Uefx Aafslc Technical specifications: Chuck size: STD: 165 mm - OTP: 210 mm Tooling: Turret x 2 Number of tools: 8 x 2 Spindle nose: JIS A2-5 Max spindle speed: 6,000 min⁻¹ Spindle AC motor: STD: 7.5 kW/30 min x 2 - OP: 11 kW/30 min x 2 Number of gantry loaders: 1 Gross weight with loader: 4,500 kg.

Year of construction: 2003, condition: ready for operation (used), A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026. Bedpfx Aaoygw Svofelc

Condition: used, Year of construction: 2013, 370mm max. machining diameter, 651mm swing over bed, 461mm swing over cross-slide, 712mm max turned length, 3500rpm spindle, 76mm bar capacity, 12 station turret, 15kW spindle motor, FANUC Oi control, Bjdpfx Aoyffz Njafjlc collet chuck , C axis & Milling, Tool presetter, Tailstock, coolant, swarf conveyor, parts catcher.

Condition: ready for operation (used), Year of construction: 1990, CNC Turning Machine Fabr.MONFORTS Type: RNC 4 Year 1990 Control FANUC 10TF-FAPT. Turning diameter max:250 mm Turning length : 1000 mm Spindle speed: 70-4000 rpm Spindle passage: 65 mm Hollow clamping device Chuck diameter 250 mm Röhm Tool turret 12 Pos.VDI 40 Bledpovgcwaefx Aafoc Tailstock MK 4 Complete machine documentation, chip conveyor. Complete weight approx. 7 500 kg.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23A0017, turning diameter over cross slide: 520 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, total height: 1,890 mm, total width: 1,620 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, CNC Lathe, with 45° inclined bed - COGENTECH > Siemens 808D control > Siemens motors > Linear guides Bjdpfx Ajvwbvpjafjlc > 6'' hydraulic universal with 3 jaws > 6-station electric turret

Condition: good (used), Year of construction: 1996, functionality: fully functional, CNC Lathe Manufacturer: HITACHI SEIKI Type: TF 20 Year 1996 Control: FANUC 21TB Bjdpfov T Uf Aex Aafolc Chuck diameter: 210 mm Forkardt. Maximum turning diameter: 200 mm Forkardt Turning length: 250 mm Spindle speeds: 52-4500 rpm Spindle bore: 52 mm Tool turret with 8 positions Rapid traverse X and Z: 25 m/min Machine without tailstock. Machine can be demonstrated under power. In good condition, complete machine documentation is available. For further information, see data sheets.

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Bodpev T Un Djfx Aafelc Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Machine documentation is available.