Used Oil Country Lathe for sale (19,535)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 100226, The submission of a bid obligates you to collect on time in week 1 or week 2 of 2026! MACHINE DETAILS Total weight: 10,000 kg Electrical connection Mains type: 3~ Frequency: 50 Hz Operating voltage: 400 V General control voltage: 24 V Valve control voltage: 24 V Connected load: 36 kW Rated current: 56 A Main fuse: 80 A Lighting connection: 24 V Lighting connection power: 18 W Hjdpfxsxzt R Ns Ag Dofr

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FXH14B001, turning length: 1,600 mm, spindle speed (max.): 2,500 rpm, travel distance Z-axis: 900 mm, workpiece weight (max.): 8,000 kg, table diameter: 1,250 mm, The machine has only been used approximately 5 times! TECHNICAL DETAILS Travel X-axis: −685 mm to +680 mm Travel Z-axis: 900 mm Travel W-axis: 800 mm Max. swing diameter: 1.600 mm Max. turning length: 1.600 mm Max. workpiece weight: 8,000 kg Table Table diameter: 1,250 mm Low speed: 5–120 rpm High speed: 150–300 rpm Machining spindle Spindle speed: 25–2,500 rpm Max. spindle torque: 478 Nm Hfsdpex Atpbofx Ag Dsr C-Axis Nominal speed: 3.33 rpm Feed range (milling): 0.1–3,000 mm/min Feed range (turning): 0.01–500 mm/rev Tool changer Tool shank: BT50 Tool magazine capacity: 16 Max. tool diameter: 220 mm Max. tool length: 500 mm Max. tool weight (milling): 25 kg Max. tool weight (turning): 50 kg Tool change time: 30 s MACHINE DETAILS Control brand: Fanuc 0i-T Dimensions Machine height: 5,625 mm Machine weight: 22,000 kg Supply Electrical connection: 90 kVA Air requirement: 5.5 kg/cm² Coolant capacity: 150 l

Condition: excellent (used), Year of construction: 2017, operating hours: 2,138 h, functionality: fully functional, machine/vehicle number: 8107000122B, rotational speed (max.): 8,500 rpm, feed length X-axis: 70 mm, feed length Y-axis: 405 mm, feed length Z-axis: 100 mm, bar diameter (max.): 32 mm, New price: €215,000 TECHNICAL DETAILS Type of CNC control: Fanuc 32i-B Number of spindles (C-axes): 2 Number of axes: 5 Number of channels: 2 Main spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 15 min / S1): 51.9 / 40.4 Nm Power (S2 15 min / S1): 7.5 / 5.5 kW Sub-spindle data Maximum bar capacity: 32 mm Draw tube bore: 38 mm Maximum speed: 8,500 rpm Torque (S2 30 min / S1): 23.6 / 14 Nm Power (S2 30 min / S1): 3.7 / 2.2 kW Axis data X1/Y1/Z1 Travel X1/Y1/Z1 (with turning quill): 70 / 405 / 100 (240) mm Maximum speed X1/Y1/Z1: 40 / 30 / 40 m/min Maximum acceleration X1/Y1/Z1: 5 m/s² Nominal thrust (S1) X1/Y1/Z1: 2,200 / 4,400 / 2,200 N Axis data X2 / Y2 / Z2 Travel X2 / Y2 / Z2: 300 / 135 / 200 mm Maximum speed X2 / Y2 / Z2: 40 / 30 / 40 m/min Maximum acceleration X2 / Y2 / Z2: 5 m/s² Nominal thrust (S1) X2 / Y2 / Z2: 2,200 N Toolholder data Slide 1 Number of fixed tools for internal machining: 4 + 4 Toolholder diameter: 25 mm Number of fixed tools for external machining: 6 Toolholder system: 16 x 16 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 7-9): max. 4,000 rpm Nominal torque (S3 40% / S1): 5.25 / 4.5 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Max. speed of driven tools (GEO 8-10): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data Slide 2 Number of fixed tools for internal machining: 4 Toolholder diameter: 25 mm Number of driven tools: 4 Collet type: ESX20 Max. speed of driven tools (GEO 8-9-10-11): max. 6,000 rpm Nominal torque (S3 40% / S1): 3.5 / 3 Nm Nominal power (S3 40% / S1): 1.9 / 1 kW Toolholder data sub-spindle slide Number of fixed tools for internal machining: 2 Toolholder diameter: 25 mm Lubrication unit data Capacity: 1.8 L Operating pressure: 20 bar Idle period: 7 min Operating period: 30 s Lubricant: ENI EXIDIA HG 68 Pneumatic unit data Hodex Eikgspfx Ag Defr Min. operating pressure: 5 bar Max. operating pressure: 6 bar Base machine consumption: 180 NL/min MACHINE DETAILS Dimensions: 2,309 x 1,448 x 2,087 mm Connected load: 16 kVA Weight: 3,450 kg Noise level: 75 dB(A) Power-on hours: 3,743 h Spindle hours: 2,138 h EQUIPMENT - with bar feeder 32 x 3000 mm - different channels for bar feeder - high-pressure unit - conversion kit for short turning - various collets, guide bushes, and tooling

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: F-00334, controller manufacturer: Siemens, controller model: SINUMERIK 802C, MACHINE DETAILS Control brand: SIEMENS Hjdpex D T A Dsfx Ag Defr Control model: SINUMERIK 802C

Condition: excellent (used), Year of construction: 2020, turning diameter: 200 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 230 mm, 4-Spindle, 2-Turret CNC Lathe KITAKO SHIMADA HS4200, Year 2020, Fanuc-0iTF control, Max. working diameter 200mm. Hfedpfjx Eht Tjx Ag Dor

Condition: used, Year of construction: 2007, MAZAK QTN 250IIM, year 2007, MATRIX control C-axis, driven tools Turning length: 1000 mm Chuck: 10 inch Spindle bore: Ø 77 mm Max. turning diameter: Ø 380 mm Spindle speed: 35–4000 rpm Spindle nose: A2-8 Spindle power: 26 kW 12-position turret – all stations driven Driven tools: 4500 rpm – 5.5 kW Tailstock Hfsdpfx Aex Hxzgeg Djr Tool measuring probe Chip conveyor Specification PDF below

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Z-axis: 300 mm, TECHNICAL DETAILS X-axis travel: 660 mm Z-axis travel: 300 mm Chuck diameter: 250 mm Swing diameter: 270 mm Hodpfx Agoxy Hp Ne Dofr

Condition: ready for operation (used), Year of construction: 1998, operating hours: 7,984 h, functionality: fully functional, machine/vehicle number: 1408, turning length: 250 mm, turning diameter: 340 mm, spindle speed (max.): 4,500 rpm, bar passage: 65 mm, controller model: Okuma OSP7000L, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 340 mm Maximum turning length: 250 mm Main Spindle Technology: Motor spindle Speed: 4,500 rpm Power (max.): 22 kW Bar capacity: 65 mm Workpiece clamping: 3-jaw chuck, Kitagawa B-210 Tool Turret I (X/Z) Technology: 12-station turret Hfodpfx Agsx Hx Dnj Dor Tool holder: VDI40 Travel in X: 260 mm Travel in Z: 640 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min Tool Turret II (X/Z) Technology: 8-station turret Tool holder: VDI40 Travel in X: 140 mm Travel in Z: 615 mm Rapid traverse in X: 15 m/min Rapid traverse in Z: 20 m/min MACHINE DETAILS Control: Okuma OSP7000L Dimensions & Weight Dimensions (L x W x H): 3,305 x 2,100 x 1,927 mm Weight: 4,800 kg Electrical connection data Rated voltage: 400 V Number of phases: 3 Frequency: 50 Hz Power consumption: max. 30 kVA Total current: 43.4 A Motor current: max. 106 A Operating Hours Power-on hours: 36,348 h Cutting time: 7,984 h Spindle run time: 8,674 h EQUIPMENT Chip conveyor Coolant pump Automatic measuring arm Transformer

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 123, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 200 V - Frequency: 50 Hz - Rated current: 21.4 A - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Deep hole drilling diameter: 10 mm - Max. clamping diameter sub-spindle: 26 mm - Max. drilling diameter sub-spindle: 10 mm - Max. tapping diameter sub-spindle: M10 - Max. drilling diameter tool spindle: 8 mm (front/rear tool holder) - Max. tapping diameter: M6 (front/rear tool holder) Hsdpox Hxz Hsfx Ag Dofr - Max. slot milling cutter diameter at tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min; rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar loader from FMB, type: TURBO 3-36, and a chip conveyor. Note: The item must be collected, by firm appointment, between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Turning tool holder, CNC internal turning tool holder Hedpjb A Iqtjfx Ag Djfr -Various sizes -Outer diameter: Ø 63 mm -Sale: as a package -Weight: 9.5 kg

Condition: good (used), Year of construction: 2007, Turning Length 3.500 mm Turning diameter 720 mm Hfsdpfx Aex Hvvueg Dsr Some technical details are shown on photos.

Condition: excellent (used), Year of construction: 2009, CNC Control: MSX 850II X axis mm: 260 Z axis mm: 590 Y axis mm: 100 (+/- 50) Maximum Turning Diameter mm: 356 C Axis Increment: 0.001° Maximum Turning Length: 510 Cutting Feed mm/min X,Z,Y: - Swing over Bed mm: Ø 923.8 Swing over Carriage mm: Ø 755 Bar Capacity mm: Ø 65 (main) Max. Rapid Traverse mm/min X,Z,Y: 30,000 / 10,000 Main Spindle (Chuck): 10” Spindle Speed rpm: 6,000 Spindle Power kW: 11 / 7.5 Torque Nm: - Main Spindle Bore mm: - Main Spindle Nose: A2-8 Turret Positions: 16 Number of Live Tool Stations: 16 Hsdpfx Aex Eh Nuog Defr Live Tool Speed rpm: 6,000 Live Tool Power kW: 5.5 EQUIPMENT Automatic Tailstock 3-color Status Lamp Fixed Tool Holders Parts Extractor

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,441 h, functionality: fully functional, machine/vehicle number: 6000816, turning length: 50 mm, spindle speed (max.): 12,000 rpm, bar passage: 12 mm, controller model: Mitsubishi TX-8i, counter spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Hfodpfxox Hxv Dj Ag Dor Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control system: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet (max. configuration): 2,000 kg Weight without control cabinet (max. configuration): 1,600 kg Weight with control cabinet (min. configuration): 1,200 kg Weight without control cabinet (min. configuration): 850 kg Operating Hours Power-on hours (control): 19,441 h Automatic mode 1: 7,607 h Automatic mode 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanical interface prepared Various fixed holders Rinse gun

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22012A, spindle speed (min.): 200 rpm, spindle speed (max.): 10,000 rpm, total height: 2,200 mm, total length: 9,000 mm, total width: 1,500 mm, overall weight: 5,000 kg, controller manufacturer: FANUC, controller model: SERIES 32-i MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 64 A - Max. bar stock clamping diameter: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Diameter of deep-hole drilling: 10 mm - Max. sub-spindle clamping diameter: 26 mm - Max. sub-spindle drilling diameter: 10 mm - Max. sub-spindle tapping diameter: M10 - Max. tool spindle drilling diameter: 8 mm (front/rear tool holder) - Max. tool spindle tapping diameter: M6 (front/rear tool holder) - Max. cutter diameter (tool spindle): 45 mm - Rotating guide bushing: 200 – 10,000 rpm (synchronously driven) - Tool spindle speed: 200 – 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min; rapid traverse in X1 and Y1: 24 m/min; in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, type: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between 04 and 12 March 2026 on a binding date to be agreed. Hfodpfxox Hxy Ae Ag Dor FCA D-75181 Pforzheim – loaded onto truck

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system Hfodpfx Asb A Sgkog Dsr -Dimensions: 660/260/H700 mm -Weight: 18 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 22006A, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, overall weight: 5,000 kg, total width: 1,500 mm, total length: 9,000 mm, total height: 2,200 mm, controller manufacturer: FANUC, controller model: SERIES 32 i-MODEL B, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI B0266E-II CNC Automatic Lathe - Operating voltage: 400 V - Rated current: 64 A - Frequency: 50 Hz - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Diameter for deep holes: 10 mm - Max. sub-spindle clamping diameter: 26 mm Hjdpfox Hwn Sjx Ag Defr - Max. sub-spindle drilling diameter: 10 mm - Max. sub-spindle tapping diameter: M10 - Max. tool spindle drilling diameter: 8 mm (front/rear tool holder) - Max. tool spindle tapping diameter: M6 (front/rear tool holder) - Max. slot milling cutter diameter tool spindle: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min, rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, model: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between March 4th and March 12th, 2026, on a date to be agreed upon. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 505, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, total height: 2,400 mm, total length: 8,000 mm, total width: 1,500 mm, overall weight: 6,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, counter spindle speed (min.): 200 rpm, counter spindle speed (max.): 10,000 rpm, TSUGAMI HS 207 CNC Automatic Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 41 A - Rated power: 14.3 kVA - Bar clamping diameter: from 3 to 20 mm - Max. machining length: 210 mm (synchronously driven guide bushing) - Static guide bushing: 250 mm - Rotating guide bushing: 80 mm - Without guide bushing: 45 mm - Max. drilling diameter: 10 mm - Max. tapping diameter: M10 - Diameter of deep holes: 8 mm - Max. counter spindle clamping diameter: 20 mm - Max. counter spindle drilling diameter: 8 mm - Max. counter spindle tapping diameter: M6 - Max. tool spindle drilling diameter: 6 mm (front/rear tool holder, B-axis tool spindle) Hodsx Hwlwspfx Ag Dofr - Max. tool spindle tapping diameter: M5 (front/rear tool holder, B-axis tool spindle) - Max. tool spindle slot milling cutter diameter: 30 mm - Tool spindle speed: 200–8000 rpm - Total number of tools (standard specification): 35 - Tool dimensions: 12 x 12 x 100 mm - Rapid traverse: 32 m/min - Rapid traverse in X1 and Y1: 24 m/min, in Y2: 15 m/min - Controllable axes: 7 The machine is equipped with a bar feeder from manufacturer FMB, type: TURBO 3-36, as well as a chip conveyor and coolant system. Note: This item must be picked up definitively between 04 and 12 March 2026 on a date to be mutually agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, machine/vehicle number: 192.6155-06, spindle bore: 62 mm, turning diameter over bed slide: 270 mm, center width: 1,150 mm, turning length: 1,000 mm, spindle speed (max.): 2,240 rpm, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to a business closure. Placing a bid obligates the buyer to collect the item within the specified pickup window: January 26, 2026 to January 29, 2026. TECHNICAL DETAILS Swing diameter over bed (max.): 485 mm Turning length (max.): 1,000 mm Swing diameter over cross slide (max.): 270 mm Distance between centers (max.): 1,150 mm Spindle bore diameter: 62 mm Internal taper, metric (max.): 70 mm Hfjdpfxjxqg Ake Ag Dor Maximum tool shank size (W x H): 25 x 25 mm Leadscrew: 6 mm Tailstock quill taper: Morse 5 Manual quill travel (max.): 119 mm Cross-slide travel from center position (max.): 110 mm Spindle speed range: 11.2 – 2,240 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,000 x 1,600 mm Weight: 1,500 kg EQUIPMENT Tailstock Multifix quick-change tool holder 3-jaw chuck, diameter: 250 mm, Manufacturer: FORKARDT Multifix tool holder, type: BD 25140 Multifix tool holder, type: BD 25120 Turning tools Steady rest (diameter approx. 150 mm) 4-jaw face plate, diameter: 450 mm

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 030381, turning diameter: 120 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 96 mm, travel distance Z-axis: 245 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 1,600 mm, total width: 1,100 mm, quill diameter: 35 mm, quill stroke: 110 mm, overall weight: 2,000 kg, controller manufacturer: FANUC, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, SPINNER TC 32-MC CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 32 A - Max. swing diameter over bed: 290 mm - Spindle head diameter: 100 mm - Max. chuck diameter: 125 mm - Spindle bearing diameter: 70 mm - Tailstock travel: 100 mm - Rotational speed of driven tools: 6000 rpm Note: Without the tool holders shown in the photos! Hfjdpfxox Hwkgo Ag Dor Attention: The item must be collected definitively between 04 and 12 March 2026 at a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 030180, turning diameter: 120 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 96 mm, travel distance Z-axis: 245 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,200 mm, total length: 1,600 mm, total width: 1,100 mm, quill diameter: 35 mm, quill stroke: 110 mm, overall weight: 2,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, SPINNER TC 32-MC CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 32 A - Max. swing diameter over bed: 290 mm - Spindle head diameter: 100 mm - Max. chuck diameter: 125 mm - Spindle bearing diameter: 70 mm Hfsdpjx Hwh Sofx Ag Djr - Tailstock travel: 100 mm - Rotational speed of driven tools: 6000 rpm Note: Without the tool holders shown in the photos! Attention: The item must be collected definitively between 04 and 12 March 2026 at a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), functionality: fully functional, machine/vehicle number: 14736259, spindle speed (max.): 6,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 200 mm, total height: 2,100 mm, total length: 1,800 mm, total width: 1,500 mm, overall weight: 2,000 kg, HYUNDAI HIT-8 S CNC lathe - Operating voltage: 380 V - Frequency: 50/60 Hz - Rated current: 24 A - Connection: 25.5 kVA Note: The item must be collected between 04 and 12 March 2026 on a specific date to be agreed upon in advance. Hsdpfsx Hwhfox Ag Dofr FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 310163917, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T, MAZAK SUPERQUICKTURN 100 M CNC Lathe - Operating voltage: 200 V Hfodpjx Hwgusfx Ag Dor - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 17.8 kVA The machine is equipped with a tailstock and a 12-position tool turret, including driven tool stations. Note: The item must be collected definitively between 04 and 12 March 2026 on a date yet to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: M034362CAFG, turning length: 209 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,200 mm, total length: 3,500 mm, total width: 2,000 mm, feed length X-axis: 170 mm, feed length Z-axis: 335 mm, quill diameter: 60 mm, overall weight: 4,000 kg, bar passage: 51 mm, controller manufacturer: FANUC, controller model: SERIES 0i-TD, number of slots in tool magazine: 12, HWACHEON VUTEX - 160 B MC CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 75 A - Swing diameter over bed: 550 mm - Speed of driven tools: 5000 rpm The machine is equipped with a 12-position tool changer, including driven tool stations and a chip conveyor. Hedpfxsx Hwf Rj Ag Dofr Note: Does not include the tool holders visible in the photos! Attention: The item must be collected definitively between 04 and 12 March 2026 on a date to be coordinated. FCA D-75181 Pforzheim – loaded on truck

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2SAY0351, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm Hsdpfx Aex Hwfqog Dofr The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: S2A130951, turning length: 350 mm, turning diameter: 114 mm, spindle speed (max.): 8,000 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, torque: 30 Nm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,500 kg, turning diameter over bed slide: 325 mm, controller manufacturer: FANUC, controller model: SERIES 18i-TB, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, EMCO MAXXTURN 25 CNC Lathe - Operating voltage: 3 x 400 V - Frequency: 50/60 Hz - Rated current: 26 A - Bar capacity: 25.4 mm - Centre distance: 445 mm - Spindle distance: 485 mm The machine is equipped with a tailstock, a main spindle, and a 12-position tool turret. It has six driven tools and a Y-axis. Note: The tool holders shown in the photos are not included! Important: The item must be collected on a binding date between 04 and 12 March 2026 (exact date to be coordinated). FCA D-75181 Pforzheim – loaded onto truck. Hsdpfex Hwanox Ag Defr