Used Nitrogen for sale (330)

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. Bedpfox Exmtsx Aafolc The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1991, We can offer you CO2 carbon dioxide gas used storage tank vessel Volume 21050L; Working pressure 22 bar; Blodpfok Eac Dsx Aafsc Export from EU We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axes: 100 m/min B / C axes: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axes: 10 m/s² B / C axes: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser power: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Total operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optic with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including rear-side safety guard Scrap conveyor belt 4× configurable control interface Manifold block for 8 pneumatic clamps per side 2× loading status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without touch probe) Bjdpfx Ajx Dkymsafolc Measurement data processing 3× horizontal jig interface Extraction ducting Protective enclosure for rotary changer, including safety guard, 1 window, and column for control desk Status signal tower top & bottom Video monitoring with camera Monitor holder Special installation KLH chiller

Condition: like new (used), Year of construction: 2023, functionality: fully functional, We have 5 umoe storage containers for sale. 3 pcs of 20 feet containers and 2 pcs 40 feet containers. 3 of them are not used and stored with 35 bar nitrogen. 2 of them are used, but only a few weeks. One is stored with hydrogen. 25 bar pressure. Bjdpfx Aaoxgn S Sofslc Full documentation package available

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: Fb001, warranty duration: 12 months, total height: 1,000 mm, total width: 800 mm, total length: 1,100 mm, type of input current: three-phase, overall weight: 100 kg, power of the servo motor: 1 W, film width: 38 mm, compressed air connection: 0.25 bar, input voltage: 220 V, nominal power: 0.5 kW (0.68 HP), heating capacity: 0.8 kW (1.09 HP), Equipment: CE marking, Performance and features: 1). The machine is mainly made of quality stainless steel; the parts contact the material is made of 304# stainless steel and food grade plastic tubes and comply with hygienic standards for food; 2).It can fullfill accurate filling and capping at one operating position. 3). The machine uses flow meter for filling which is with high filling precise. 4). All its pneumatic and electric parts are from world famouse brand which are good quality. 5). can achieve vacuum pumping before they are filled, thereby helping extend the shelf life of the product. 6) Can add nitrogen function according to clients requirement. Application: It can be widely used in bag-in-box filling applications for such liquid materials as wine, edible oil, fruit juice, additives, milk, syrup, alcoholic beverages and concentrated seasonings.suitable for all kinds of bags and caps. Bedpfsxmwkqex Aafslc

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, power: 12 kW (16.32 HP), General Travel range X-axis: 3048 mm Travel range Y-axis: 1524 mm Travel range Z-axis: 200 mm Max. table load: 1450 kg Table type: Automatic shuttle table Bledpfx Aaox Agl Asfec Laser source: max photonics laser Laser head: BodorGenius Control system: Bodor Thinker 3.0 Total connected load: 12kW / 99.6kVA / 153.0A Travel speed Rapid traverse in X, Y axes max.: 200 m/min Acceleration X, Y max.: 4G Accuracy Positioning accuracy: ±0.05 mm Repeatability: ±0.02 mm Equipment Base machine P3 12kW 11 kW 8L extraction unit Nitrogen proportional valve Water chiller Spare parts kit Commissioning of the machine

Year of construction: 2006, condition: good (used), functionality: fully functional, Without solder Bljdpfsxzrflsx Aafsc Nitrogen hood IR preheating Single soldering nozzle 3 solder frames Software, etc., manual Tool, spare parts box New timing belt, new impeller for drive installed

Condition: ready for operation (used), System for wet chemical processing of wafers up to 12in, substrates up to X/Y 9in/9in, stand-alone housing, process modules, PP process chamber, 2 programmable media arms, rotational speed 1-4000rpm, acceleration ramp 1-3000rpm, spin time 1-999s, exhaust process bowl 2x DN110, chamber 2x DN110, housing 1x DN110, control 1x DN110 (each approx. 200m³/h), CDA 8+/-2bar, vacuum -0.8+/-0.2bar, nitrogen 4.0+/-0.5bar, 3 media drains, waste box for 2 concentrate wastes, reagent box with pressure vessel, 4 Julabo thermostat baths. The system was dismantled during disassembly. Viewing possible by arrangement. Bledpfjxzii Uex Aafjc

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Blsdshv U U Dopfx Aafjc Cooling Mode: WATER COOLING

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2426 09 1364, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Bodpfxjxywupo Aafjlc Fume extraction system

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Bjdohv U T Hspfx Aafelc Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Bedpjhwhfxefx Aafslc Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Blodpfehv U Tfex Aafec Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2023, operating hours: 60 h, functionality: fully functional, machine/vehicle number: 13943/08, overall weight: 1,660 kg, tank capacity: 500 l, Equipment: CE marking, The S-4, manufactured in series production, is a very compact mobile suction unit. Its impressive suction power allows conveyed material to be transported at considerable transfer speeds over long distances using flexible hoses with an 80 or 100 mm diameter. The high-tech filtration system, featuring three-stage serial separation and a pneumatic AirShock® filter cleaning device, ensures constant high suction performance even with challenging dust types. The collection container is hydraulically raised to its working position and discharges the extracted material into BigBags or open containers. Special versions are available with ATEX-compliant explosion protection and nitrogen cooler for catalyst handling. The S-4: the compact unit with exceptionally high suction power, produced with series production quality. Blodpfx Ajxyq Ngeafjc

Year of construction: 1995, condition: used, machine/vehicle number: 14165 / 14166 / 14167, Capacity: 6 m³/h Pressure: 16 bar Pressure head: 34 m Speed: 2.750 rpm Connection: 1.530 W max. temperature: 25° C Bedpfx Aascq Uggofolc Description: Pump system consisting of three identical pumps; Pressure tank for nitrogen 8 litres, 16 bar, up to 70° C condition: very good weight: Dimensions: 800 x 400 x 600 mm

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: Bedpfx Aexm Rwqjafelc 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Condition: excellent (used), 3D Metal Printer Manufacturer: CONCEPTLASER Model: M1-2010-01-01 Year of manufacture: 2010 Build volume: 250 x 250 x 275 mm Bedpsxk T Ndefx Aafjlc Compressed air: 7 - 8 bar Inert gas: 5 bar Supply voltage: 3/N/PE AC400V +/-10% 50 Hz Materials: CL50WS: 50 kg and CL91REW: 40 kg Equipment: - 1 Rofin fiber laser StarFiber 200 with 200 W - 1 process chamber (can be inertized) - 1 loading station - Nitrogen generator incl. 1000-liter pressure vessel - Conceptlaser automatic sieving station (2 material sets) - Explosion-proof vacuum cleaner Manufacturer: Ruwac, Year: 2023 - Various accessories (filters, seals) - Machine operating hours: 16,620 h - Laser source operating hours: approx. 11,000 h

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors Bedpov Sm Rujfx Aafslc • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,400 h, laser power: 6,000 W, laser wavelength: 1,070 nm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,540 mm, travel distance Z-axis: 120 mm, The machine's cutting head was overhauled by the manufacturer 9 months ago! TECHNICAL DETAILS Travel range X-axis: 3060 mm Travel range Y-axis: 1540 mm Travel range Z-axis: 120 mm Laser power: 6,000 W Laser wavelength: 1,070 nm Working area: 3,000 x 1,500 mm Positioning speed: 350 m/min Maximum cutting speed (parallel to X-, Y-, Z-axis): 150 m/min Positioning: 280 m/min Acceleration: 60 m/s² Minimum programmable increment: 0.001 mm/m Repeatability: 0.03 mm/m Cutting accuracy: 0.05 mm/m MACHINE DETAILS Control type: CNC control Laser source model: IPG YLS-6000 Dimensions & Weight Dimensions (L x W x H): 1,000 x 3,080 x 3,060 mm Blsdpfx Aaexxih Eofoc Weight of cutting system: 18,000 kg Air pressure: 6 bar Nitrogen pressure: N₂ 25 bar Oxygen pressure: O₂ 10 bar Control voltage: 24 V Power requirement: 54 kVA Main power supply: 400 V / 50 Hz Operating hours Beam emission time: approx. 4,400 h Laser activation time: 19,855 h EQUIPMENT CE marking Chiller unit Emergency stop switch Safety light curtain Central lubrication system Linear motors on all axes Carbon traverse (crossbeam) Composite body Pallet changer Various nozzles Protective lenses

Condition: new, laser power: 6,000 W, sheet thickness stainless steel (max.): 18 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 10 mm, working length: 3,048 mm, working width: 1,524 mm, workpiece weight (max.): 900 kg, overall weight: 4,980 kg, total length: 4,955 mm, total width: 2,320 mm, total height: 2,200 mm, Bodor Power Laser Source 6 kW Bodor Genius Laser Cutting Head with Autofocus Bodor Thinker 3.0 Control System Bed with mortise and tenon structure Bodor Servo Motor and Driver Bodor Oxygen Control Valve and Nitrogen Control Valve 21.5-inch touch screen monitor Door safety interlock Bodpfxexxa Sho Aafelc Easily accessible sliding bed Bodor Lightning Piercing Technology Automatic adjustment of cutting gas pressure Expert database for laser cutting technology Active anti-collision function Ergonomic remote control (Bodor Mango®) Anti-slag protection Gas-saving nozzles with stable flow Intelligent maintenance reminder WiFi internet connectivity Laser fault alarm Water chiller Exhaust system i7 LENGTH (mm): 4955 WIDTH (mm): 2320 HEIGHT (mm): 2200 MACHINE WEIGHT (kg): 4980 WORKING AREA (mm): 3048 x 1524 MAX. WORKPIECE WEIGHT (kg): 900 MAX. SIMULTANEOUS SPEED (m/min): 100 MAX. ACCELERATION: 1.5G POSITIONING ACCURACY (mm): ± 0.05 REPEATABILITY (mm): ± 0.03 SCREEN SIZE (inches): 21.5 LASER POWER (kW): 6 MAX. SHEET THICKNESS CARBON STEEL (mm): 22 MAX. SHEET THICKNESS STAINLESS STEEL (mm): 18 MAX. SHEET THICKNESS ALUMINUM (mm): 16 MAX. SHEET THICKNESS BRASS (mm): 10

Year of construction: 2010, condition: like new (used), 20m³ OFFLINE - FLUORINATION Fluorination of plastic surfaces with reactive gases for permeation reduction The technology used is suitable for treating surfaces of plastic fuel tanks (PFT) with the help of fluorine gas mixture (10% F2/N2) and changing the surface properties in such a way that a desired reduction of permeation of fuels from the PFT into the environment and thus the emission of fuel vapors is significantly reduced. Technical data: Vacuum chamber (capacity): 20 m3 Process time, individual: (approx. 2.5 hrs.) Chamber temperature, jacket: 90 - 100 °C Products introduced: Fuel tank and accessories Material: stainless steel 1.4301 and similar Min. vacuum pressure: 1 mbar (a) Process pressure : 350 - 700 mbar (a) Nitrogen inlet pressure : 15 bar(g) F2/N2 inlet pressure : 150 bar, alternatively 100 bar Gas mixture 1 10% F2 in N2 Gas mixture 2 20% F2 in N2 as gas mixture MAK values H, HH 0.1 ppm F2, 0.2 ppm F2 Supply voltage 400 V Frequency 50 Hz Connected load, max. 200 kW Back-up fuse 150 A The fluorination plant consists of the following components: - A treatment chamber (20m3), into which the plastic material to be fluorinated can be placed in material baskets/boxes suitable for this purpose, - A bundling station for fluorine-nitrogen mixtures Bottle bundles of 12x50 liters for 10% F2/N2 at 150 bar and 20% F2/N2 mixtures at 100 bar, - Amature panel for nitrogen supply of the process flow, - Vacuum pumping station in a container, for conditioning and disposal of the treatment chamber - Heating system for temperature control of the treatment chamber - Control cabinet with a programmable logic controller S7/ WIN CC7 - Operator control station for process monitoring, process parameter setting and the visualized plant picture, as well as the trend control, the error message system, the protocol output, - Al2O3 absorber (silo) Dimensions: Lower unit: vacuum chamber heated, with control cabinet. Blodpfjid Ngdex Aafec length: 7500mm width: 2850mm height: 2380mm weight approx. 12.000 Kg Upper unit: pump chamber Length: 4100mm width: 2850mm height: 3000mm Weight approx. 5.000 Kg

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Bjdpfx Aaehv U Swjfslc Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 4000*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 6,000 W, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, fume extraction, safety light barrier, Here is the English translation, styled naturally and professionally: Modern W1530FC Fiber Laser Cutting Machine with Dual Automatic Exchange Tables and Full Enclosure Perfect for cutting carbon steel, stainless steel, aluminum and brass. Available laser power: 6000W Blodpfx Aexw Ibheafoc Key Advantages • Heavy-duty frame – high rigidity, precision and stability • Automatic table exchange – higher productivity and safe operation • Aerospace-grade aluminum beam – low weight, fast acceleration, corrosion resistance • BOCI BLT cutting head – fast focusing, optics protection, pressure sensor, IP65 cooling • Raycus laser source – stable output and low operating costs • Cypcut control system – intuitive operation, nesting, automation features • S&A industrial chiller – ±0.5°C temperature control, safety alarms • High-precision drive system and Yaskawa servo motors – accuracy ±0.03 mm/m • Automatic lubrication and remote control pendant Cutting Capacity (depending on laser power) Material Carbon steel ≤25 mm Stainless steel ≤18 mm Aluminum ≤12 mm Brass ≤10 mm Assist gases: • Steel – oxygen • Stainless steel & aluminum – nitrogen Technical Parameters • Model: W1530FC (1500 × 3000 mm) • Maximum speed: 100 m/min • Acceleration: 1.0G • Positioning accuracy: ≤±0.05 mm/m • Repeatability: ≤±0.02 mm/m • Power supply: 3-phase 380V, 50Hz • Total power: 60 KVA The listed price is net (excluding VAT) Please feel free to contact us regarding orders or technical details. Best regards, Marek.

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Blsdpfohwhf Hsx Aafoc Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2006, condition: used, functionality: fully functional, The unit is refrigerant-free and fully filled with nitrogen. Including control cabinet. Specification: Bledpfx Aaswu A Dujfjc Flow rate: 315 m3/h Permissible operating pressure: 17 bar The Reisner chiller, equipped with two Bitzer compressors of the type KWR W250KS, is a reliable and efficient solution for air conditioning and cooling in industrial applications. The system is characterized by its robust construction and high performance to ensure constant and stable temperatures. With the powerful Bitzer compressors, the chiller provides efficient cooling performance with low energy consumption.