Used Nitrogen for sale (325)

Condition: new, Year of construction: 2025, The Senfeng SF3015H4 is a machine for heavier production requirements. With an extra heavy frame, this machine is suitable for higher production requirements. This frame is also prepared for possible automation. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. Kodpfx Ahsvtzbqovelp - Laser Power: 12,000 W - Laser Wave length: 1020 nm - 1080 nm - Range X-axis: 3000 mm - Range Y-axis: 1500 mm - Max. Acceleration plate cutting: 2.8 G - Maximum simultaneous axes speed: 200 m/min - Positioning accuracy: ± 0.03 mm/m - Repeat accuracy: ± 0.02 mm/m - Operating voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 9,000Kg - Equipped with shuttle table – Max. weight of plate per changing table: 3,000 Kg ===== In addition, the machine is equipped with the following options: - Control: Hypcut - Pull-out drawers for collecting small parts - Aviation aluminum beam - 12,000 watt Max Photonics EU Laser source - Cutting head: Boci BLT441 - Closed top and full machine housing - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure) - Water cooler - Power stabilizer - Automatic lubrication unit - Matching extraction - Installation by our own technicians (Additional price based on location)

Condition: new, Year of construction: 2025, laser power: 3,000 W, The 1530G is the ideal middle ground. This compact model saves a lot of space in your workshop due to the absence of a change table. At the same time, large format plates can be processed on this machine. Ideal for the entrepreneur who has a low to medium production requirement with a small floor space. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. - Laser Power: 3,000 W - Laser Wave length: 1020 nm – 1080 nm Kodpfevty E Uox Ahvslp - X-axis range: 3000 mm - Y-axis range: 1500 mm - Max. Acceleration plate cutting: 0.8 G - Maximum simultaneous axes speed: 80 m/min - Positioning accuracy: ± 0.03 mm/m - Repeat accuracy: ± 0.02 mm/m - Operating voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 4,000Kg - Equipped with shuttle table – Max. weight of plate per changing table: 700 Kg ===== In addition, the machine is equipped with the following options: - Control: Cypcut - Pull-out drawers for collecting small parts - Aviation aluminum beam - 3,000 watt Max Photonics EU Laser source - Cutting head: Precitec Thunder - Closed top and full machine housing - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure) - Water cooler - Power stabilizer - Automatic lubrication unit - Matching extraction - Installation by our own technicians (Additional price based on location)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, sheet thickness (max.): 20 mm, input voltage: 400 V, type of input current: AC, Input voltage: 400V AC Frequency: 50Hz Connected load: 88kVA Control voltage: 24V DC Required fuse protection: 3x160A Laser power: 4,000W Compressed air connection: 7-10bar Nitrogen connection N2: 30bar Oxygen connection O2: 20bar Max. component size: 4,000x2,000x20mm Additional equipment: FEZER Maschinenfabrig GmbH – vacuum lifter V03004 (year: 03/99) Kedoycwwdjpfx Ahvjlp STOPA Anlagenbau GmbH & CoKG – loading storage system – 084997 (load capacity: 3,000kg, year: 2008, sheet format: 2x4m, storage capacity: 30t, storage height: 5.36m, storage positions: 10) Overhead crane Loading and unloading stations

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter Kodpfx Aex R D Efohvjlp D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 1998, Manufacturer: Zanchetta (Romaco Group) Model: Rotolab Year : 1998 Type : High shear granulator mixer Capacity : 2 Litres Opening : lid Double heating jacket Crumbler = 1500 rpm Variable mixing speed : 20 – 955 rpm Heating integrated into the double jacket. Kedpox R A Ifefx Ahvelp Max. Max. bowl temperature 85°C, Heating jacket Connection for vacuum and nitrogen (.), Materials: Stainless steel Operating pressure: 0.6 MPa Becker vacuum pump: 1.25 KW    

Condition: used, Year of construction: 2011, Manufacturer : Packo Inov NV Type: Cryofreezer / Batch freezer Year of manufacture : 2011   Klodox R A Apjpfx Ahvop Total volume : 950 L Dimensions : 150 x 120 x 230 cm Supply voltage 3x400V + N – 50Hz Minimum temperature set point: – 120°C Weight : 600 Kg Materials: 304 L stainless steel Full technical file: available in digital version Refrigerant : Liquid nitrogen   Previous use: 0.5 or 1L bottles containing Biological active ingredient. 0.5L bottle : o Dimensions: 72 x 72 x 180 mm (WxDxH) o Maximum capacity: 32 bottles 1.0L bottle : o Dimensions: 90 x 90 x 220 mm (WxDxH) o Maximum capacity: 32 bottles  

Condition: used, - Material: Stainless steel - Pneumatic version / ADF - EX Klsdpox Rz Nbsfx Ahvep - 2 truncated 400L tanks on trolley (per dryer) model WSG120 / D.1200 / 900 X PF.500 - 1 tank turner common to both dryers - Control cabinet - Safety by 2 explosion membranes coupled to nitrogen gas cylinder

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 6000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 21 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Furnishing: - Resonator Ytterbium YLS 4000 compact - Beckhoff controller - Precitec ProCutter Automatic cutting head - autom. Lubrication system Kledpfx Aogvq D Ushvep - CAD / CAM software LANTEK EXPERT CUT - 17 "touchscreen, keyboard, control panel - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel 25 mm - stainless steel 15 mm - aluminum 12 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables - d 2,500 kg. assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system - Sick light barrier safety device - Spare part basic supply package Why Fibermak? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - axes equipped with linear motors / Servo motors reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology (Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting from reflective materials like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, equipped with world-famous, durable, high-quality components - ERMAK passes the price advantage on to its customers thanks to its fast and high quality production - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: new, table length 3000 mm table width 1500 mm burner heads Precitec ProCutter laser capacity in Watt 4000 x-axis 3050 mm z-axis 150 mm y-axis 1550 mm total power requirement 22 kW dimensions 9190 x 3710 x 2200 mm weight of the machine ca. 11200 kg Klodpsgvq A Eofx Ahvjp Furnishing: - MOMENTUM GEN - 2 fiber laser cutting machines 3,000 x 1,500 mm - Ytterbium YLS 4000 compact resonator (4 kW) - PRECITEC PROCUTTER laser cutting head - CAD / CAM software BECKHOFF - Controller CP 6242 - 17 "touchscreen, keyboard, control panel, alphanumeric keyboard - Collective conveyor under the cutting table - additional loading unit Cutting capacities: - normal steel ... 20 mm - stainless steel ... 12 mm - aluminum ... 10 mm - brass ... 6.0 mm - Copper ... 5.0 mm Workspace: - max .: 3,000 x 1,500 mm Axes: - Machine axes: 4 axes (X, Y, Z, U) - s speed: 100 m / min (simulated) - Axis speed X / Y: 100 m / min (single) - Positioning accuracy: + - 0.03 mm / min - Burning height: 125 - 200 mm Loading table: - Number of pieces 2 (35 seconds for changing) - automatic change of tables assisting gases: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminum - compressed air or nitrogen (0.5 - 25 bar) included : - Compatible suction system - Light barrier safety device - Spare part basic supply package Why Fibermak / Fiberlaser? - Up to 3 times faster cutting compared to other laser technologies - Machines for cutting thin sheets - Axis speed: reach up to 141 m / min. - Accelerations up to 2G - Fiber laser is the green laser technology - Saving of at least 50% energy costs) - There is no need for laser gas mixing - There is no need for optical components - therefore, among other things, very low-maintenance - Save up to 50% per part through more efficient production - Extended options: cutting reflective materials * like aluminum, copper, brass etc., - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Creative design, constant, highest technology and quality - High reliability - High efficiency - High quality - CE declaration

Condition: good (used), Pressure reducer, pressure regulator, pressure gauge -for nitrogen -Inlet pressure: max. 25 bar -Output pressure: 0-1.5 bar adjustable -Quantity: 1x Minor available Klodpfxeb Sc Sus Ahvsp -Weight: 1.3 kg

Condition: good (used), Pressure reducers, pressure regulators, liquid nitrogen containers -for: e.g. liquid nitrogen -Contents: 10 liters -Operating pressure: 3 bar -Dimensions: Ø 305/560 mm Kljdpfx Aod R Urtehvep -Weight: 9 kg

Condition: used, Pressure reducers, pressure regulators, manometers -for nitrogen -Inlet pressure: max. 200 bar -Outlet pressure: 0 - 50 bar adjustable -Number: 1x reducer available -Price: per piece Kljdeb Uhuxspfx Ahvop -Weight: 1.6 kg/piece

Year of construction: 1998, condition: used, temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h Kledeu Rwauopfx Ahvop - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is.

Condition: used, Technical details: tank capacity: 250 l overpressure : - bar motor: - dimensions L x W x H: auf Anfrage m There are 5 hydraulic pump units available for sale. (price per piece) Device no. 1 + no. 2 + no. 6: Features: Operating pressure max. 150 bar, connection Ø outside 30; 45; 52mm, capacity 250 litres, nitrogen capacity 20 litres Pressure 90 bar Device No. 4 Features. Operating pressure 160 bar, connection Ø outside P2=30; P1=45: Kodpfx Aju N E N Iehvjlp Operating pressure 160 bar, connection Ø outside P2=30; P1=45; T=52; L=26mm, capacity 250 litres, nitrogen capacity 2x 10 litres Pressure 54 bar Device No.7 Features. year of construction 2001, operating pressure 100 bar: year of construction 2001, operating pressure 100 bar, connection Ø outside P2/P3=26, P1=22; L=36mm, capacity 160 litres, nitrogen capacity 10 litres pressure 90 bar *

Year of construction: 1998, condition: used, Technical details: temperature: 200-210 °C throughput speed: 1000 mm/min max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Kodpou Rnd Dofx Ahvelp Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is. *

Year of construction: 2019, condition: used, Technical details: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW Kjdpeu N Auuefx Ahvolp weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder div. small parts *

Condition: used, Technical details: tank capacity: - l overpressure : - bar motor: 1400 U/min total power requirement: 3,0 kW weight: 312 kg dimensions L x W x H: 1,05 x 0,67 x 1,94 m Klodsu N E Nhepfx Ahvop application use of hydraulic components operation pressure min/max.: 60/70 bar - nitrogen 54 bar - hydr. tank size L: 630 x W: 440 x H: 380mm with 100 Liter content *

Condition: used, Technical details: tank capacity: 800 l Kedpfx Ahju N Ervevslp overpressure : zul./max.=ca.100 bar motor: 5 weight: ca. 2,4 t Hydraulic Pressure Storage Plant - aggregate= LxWxH=2,48x1,73x2,13m - oil tank :LxWxH=2,0x1,1x0,5m - 5 motors ( from 3,8 up to 66 kW) - coolant: nitrogen - 5 pumps iD. *

Condition: excellent (used), Year of construction: 1999, LNG Methan Gas Cryogenic Semi-trailer M1 Engineering Kjdewp Iq Aopfx Ahvslp Hersteller: M1 Engineering Baujahr: 1999 Volume: 49 m3 Working pressure: 8 bar. Tare 15435 kg Pump Flowmetter We also have other tankers, tanks, vessels for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane We will be glad to answer your questions via Phone and E-mail

Condition: excellent (used), Year of construction: 2016, Orca 8,2 m3 tank gas argon cryogenic Manufacturer:Scania Year: 2016 Mileage: 425000 km Capacity:8,2 m3 Kljdpfju Snghsx Ahvep We also have other tankers, tanks, vessels for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane We will be glad to answer your questions via Phone and E-mail

Year of construction: 2025, operating hours: 150 h, condition: like new (used), functionality: fully functional, We are offering this as-new semi-automatic filling and capping machine: Monoblock Tenco Jarsélite Semi-Automatic Compact Filler, year of construction 2025. Performance: up to max. 500 units/hour, depending on product, fill volume, and operator. Filling volumes: 50–1,300 ml, with precise dosing adjustment. The bottle neck can be flushed with nitrogen. This machine is suitable for filling virtually any product. This filling and capping machine is ideal for liquid and viscous products in the food, beverage, cosmetics, pet food, honey, and fruit brandy sectors. The machine handles a wide variety of product consistencies: Liquid products are fed directly via a tank connection, while viscous products can be added using the optionally available hopper. Depending on your requirements, the machine can be configured as a bottle or pouch filling system. Chunky products such as pesto, ketchup, soups, and sauces can also be processed easily. Various capping heads are available to enable flexible adaptation to different closure systems. With a special kit, spout pouches can also be filled and sealed, creating a 2-in-1 system (Pouchélite). We have integrated a nitrogen flushing feature for bottles and pouches. Currently, one capping head is included: 28 ROPP. The machine is operated solely via compressed air and enables hot filling. Klsdpfx Aeya Ar Uehvop If you have any questions or require further information, please don't hesitate to contact us by message or phone.

Condition: used, functionality: fully functional, Year of construction: 2000, laser source manufacturer: Trumpf, laser source model: TLF 3000 turbo, laser power: 3,000 W, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 6 bar, Trumpf Maschinen Grüsch AG, laser cutting machine, TRUMATIC LC3030 Model: LC3030 Series: Trumatic Year of manufacture: 2000 General information: Input voltage: 400V AC Frequency: 50Hz Connected load: 73kVA Control voltage: 24V DC Required protection: 3x125A Laser power: 3,000W Compressed air connection: 6 bar Nitrogen connection (N2): 30 bar Oxygen connection (O2): 20 bar Max. component size: 3,000 x 1,500 x 20 mm Accessories: Liftmaster Kjdpfx Aoyazrtehvelp Loading and unloading stations

Condition: excellent (used), Year of construction: 2013, MAN gas tank ADR truck used for carbon dioxide CO2 Truck BDF/ADR MAN year 2013 606.000 km Tara 8705 kg Kjdpfsyanhzjx Ahvelp Tank for CO2 Pump Flow-meter Only for export from EU We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, degree of automation: automatic, laser hours: 2,800 h, laser power: 6,000 W, positioning speed: 280 m/min, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, TruLaser 5030 fiber L76 6kW + LiftMaster Linear + Material Buffer small storage system BASIC MACHINE: TruLaser 5030 fiber (L76) Machine • Working area: 3000 × 1500 mm • Box-type frame • Longitudinal conveyor belt • Precision motion unit for high-accuracy processing • Gantry drive with linear direct drives • Process chiller for machine and laser (water/air) • Work area lighting • Pilot laser • Spraying system • Automatic nozzle cleaning • Integrated electrical enclosures • Integrated cabinet • Enclosed beam guidance via fiber optic cable (LLK) • Machine status indicator light • Transport and installation device TRUMPF laser • Pump diode excitation • Laser power regulation Cutting unit • Universal cutting head with fully adaptive lens system • Protective glass • Online condition monitoring for protective glass • Dynamic Focus Control • Automatic nozzle centering Control • Rapid post-production Kodpfeyah Rcox Ahvslp • SINUMERIK CNC • Ergonomic control panel with 21.5" wide-format multi-touch color display • Integrated technological parameters • Automatic shutdown • Programmable pressure/cutting gas selection • Microweld • Remote maintenance interface • Production planning • Multi-sheet processing • Condition Guide • Cutting Guide Functions • AdjustLine • BrightLine fiber • Smart Nozzle Automation • DetectLine • Drop&Cut • Integrated camera 1 for process monitoring • ControlLine • FastLine • FlyLine • FocusLine • NitroLine • PierceLine • PlasmaLine • Fusion Cut Performance Package • Highspeed Cutting Package • Copper Cutting Package • Brass Cutting Package Data transmission • USB port • RJ45 network interface • Online Update Manager Safety • CE marking and EC Machinery Directive compliant • Light barriers • Multi-chamber compact dust extraction unit • Electric rolling roof • Enclosed protective housing with certified viewing panels on both right and left sides Advanced standard configuration • Compact dust extraction • Mild steel slats • Laser powered via the machine • Automatic longitudinal pallet changer • Machine ambient temperature range 5-35°C / up to 45°C • Smart View MT ready • Data usage agreement • Nanojoints • Smart Rerun / Purchase • External solid-state laser TruDisk 6001 with BrightLine fiber OPTIONS: Highspeed Eco cutting package • High-speed cutting with reduced gas consumption Thick plate cutting package Prefilter for nitrogen and oxygen • Particle filtration for nitrogen/oxygen process gas lines, prefilter with external filter element Easy Filter • For annual maintenance of spent cooling water • Eliminates regular water changes Wireless Operating Point

Condition: new, Year of construction: 2022, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Kledpfshwhfqox Ahvsp The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING