Used Stainless for sale (6,435)

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H With manual gate valve Gas strut opening lid Internal stainless mesh screen Mobile on lockable castors Some with pneumatic vibration device. Some with level sensor device In excellent condition Ijdpeurf Twofx Abnotk

Condition: excellent (used), Conveyor Food Grade 316 stainless steel Itodeyw Tdkspfx Abnjk Belt dimensions 1450mm x 700mm Overall dimensions 1450mm long x 900mm wide

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Iodozhnlzepfx Abnetk Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Itedszizkyjpfx Abnok Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Tote Bin Lifter for stainless steel meat bins Lifting height: 2050 mm Total dimensions: 1050 mm x 900 mm x 2940 mm Itjdpfeym U Afsx Abnek

Condition: used, Reportedly unused Sinclair Stainless Fabrications approximately 20,000 litre nominal capacity vertical 316L stainless steel fermenter/bioreactor, approximately 15,000 litre working capacity with (4) zone limpet coil jacket. Unit has a welded dished top and bottom. Internal rated -1/+3barG internal operating at 0-159degC. Internal coils rated -1/+5barG and limpet coils rated -1/+5barG operating at 0-159degC. Mixer Drive = Nominal Speed: 100 RPM; Motor: 55KW 1500RPM 250 IE3 IP55 3PH Isdpsyln E Rjfx Abnjtk 230/400V 50HZ; Gearbox Input Coupling: Integral w/Gearbox; External Paint Finish: Standard Paint; Colour: Blue RAL5005 Mounting = Arrangement: Structural Nozzle w/Flange Shaft Seal = Mechanical Seal: Custom Seal - No Bearing Balanced (AES CDM C/SiC/C/SiC-AFLAS(3) - Double Mechanical Seal. ) Mounting Flange = Flange Size: DN400 [16”]; Flange Class: CL-150; Flange Material: 316 Stainless Steel Face & Core Shaft = Shaft Diameter: 4-1/2”; Shaft Extension: 6754 mm; Shaft Material: 316 Stainless Steel Impellers = Impeller #1: 921 mm BT-6; Impeller #2: 959 mm W-4; Impeller #3: 959 mm W-4; Impeller #4: 959 mm W-4; Impeller Material: 316 Stainless Steel Mixer Options = Gearbox with Food Grade Lubricants Design Compliance = Machinery Directive 2006/42/EU Specifications: Capacity: 15,000 L Type of stainless: 316L Internal Pressure: -13 bar Internal Temperature: 0°C Jacket Pressure: -15 bar Jacket Temperature: 0°C Diameter: 1,800 mm Straight Side: 5,900 mm Legs/Lugs: Mounted on (4) legs Weight: 6720kg Dimensions: 2400mm diameter x 7500mm height

Year of construction: 2004, condition: excellent (used), Stainless Steel Fermenters / Storage Tanks - 39,000 L - Food Grade These ASTM 304 stainless steel tanks are highly versatile and ideal for the industrial storage or fermentation of wine, spirits, distillates, and craft beer. They are also perfectly suited for the essential oil industry to store floral waters (like rose or lavender distillate) and for water treatment facilities requiring large-capacity hygienic storage. Their conical bottom design ensures 100% full drainage and effortless cleaning, making them highly efficient for various food-grade and liquid processing applications. Iodpfszud Irsx Abnstk • Quantity: 6 units • Capacity: approximately 38 m3 (38,000 liters) each • Type: Vertical stainless steel tanks • External dimensions: • Diameter: 2.80 m • Height: 7.20 m • Material: Stainless steel (food grade), ASTM 240 type 304 / AISI 304 • Last used: 2017 • Condition: Good, stored empty • Location: Rosenovo, Sredetz Municipality, Burgas region, Bulgaria • Suitable for: wine, juice, beer, edible oils, food & beverage liquids or other liquids (they have been used for wine storage). PRICE IS PER UNIT. Available as a full lot or individually (Full lot price is 7000 EUR per unit). Loading assistance possible.

Condition: excellent (used), Stainless steel lump breaker, double shaft Itsdpfx Aszu Rrwobnsk 2 electric motors, 380 volts

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Diameter range: 99 mm - 153 mm Height range: 28 mm - 250 mm Production capacity: up to 160 - 200 pieces per minute (c.p.m.) Number of heads: 4 Itjdpfx Abszkqwlonok Extended lid feeder Stainless steel

Condition: good (used), Marel Stainless Steel floor weighing scale Marel weigher indicator M2200-P02 110-230 Vac, 0.24-0.12 A Dimensions scale: 900 mm x 900 mm. Itedpfox Il Ntjx Abnjk

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Itedpex Hz Dqjfx Abnjk Including ramp

Year of construction: 2020, condition: good (used), Gough Engineering Sieving station and filtration unit Stainless, sieving station with WMF dust extraction unit, 555mm diameter mesh, 3Ph Ijdpfezvlk Dex Abnetk

Condition: used, Winkworth PV1000 Jacketed Stainless Steel Tank Capacity 1000 Lts Itodpfx Abjwq Sdionjk Complete with Winkworth mixer and ancillary equipment

Year of construction: 2014, condition: good (used), Riggs 1000 Depositor Iodpfx Abszvlkkonstk Stainless depositor, 50L hopper, filling 5ml to 55ml, with nozzle on hose, mobile

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine was serviced annually (most recently in December 2025) – service records are available. The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 with 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity normal steel: max. 12 mm Cutting capacity stainless steel: max. 10 mm Cutting capacity aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the output of the laser resonator: 27 mm Itjdpfx Aszrnhwsbnjk Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Operating hours (according to the counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loader and unloader Filtration system Manuals

Condition: used, 30m³ stainless steel tank Itsdpfjyw Ub Rox Abnjk features a full-height stainless steel coil Diameter 2.97m Total height 5.40m Cylinder height 4.30cm Leg height 30cm Cone height 30cm Gear motor height 50cm

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Isdpjzunvasfx Abnotk Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Condition: excellent (used), Year of construction: 2017, Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Condition: unused, without extraction fan -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg Itjdpfx Absytgrxjnjk

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 231458, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 370 mm, spindle speed (max.): 6,000 rpm, table load: 800 kg, TECHNICAL DETAILS Travel range X-axis: 3,700 mm Travel range Y-axis: 2,100 mm Travel range Z-axis: 370 mm Rotational range C-axis: 0–362° Swivel range A-axis: 0–90° Travel time C-axis (0–392°): 3 s Travel time A-axis (0–90°): 2 s Spindle speed: 6,000 rpm Spindle power: 16.5/56 kW Speed X-axis: 30 m/min Speed Y-axis: 30 m/min Speed Z-axis: 5 m/min Dimensions of tilting table: 3,500 × 2,000 + 500 mm Load capacity: 800 kg MACHINE DETAILS Stainless steel cover for saw blade with opening for cutter: Ø 425 mm Stainless steel cover for saw blade: Ø 625 mm Total power consumption: 23 kW Water consumption for saw blade: 30 L/min Total weight: 4,800 kg EQUIPMENT Itjdpfezuyryox Abnsk Material and saw blade measuring system Vacuum system for moving the panels Camera with software for management Pneumatic tilting table Motorized rotary head (C-axis) Motorized saw blade inclination (A-axis) Stainless steel cover for saw blade with opening for cutter Stainless steel cover for saw blade

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,350 mm, outer diameter: 1,750 mm, overall weight: 1,250 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Itjdjzht Smopfx Abnjk Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell OD: 1,750mm. Overall Height: 3,350mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 1,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19693. Factory Tested: November 2020. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and spray fitting, pressure relief valve connection, nitrogen blanketing connection, Endress & Hauser thermowell pocket, lifting lugs, and earthing boss. Seven units currently available both with and without an agitator fitted. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 35,000 l, usable tank capacity: 35,000 l, total length: 4,865 mm, inner diameter: 3,000 mm, outer diameter: 3,016 mm, overall weight: 4,670 kg, wall material: stainless steel, wall thickness: 8 mm, manhole location: top, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this large-capacity 316L stainless steel horizontal storage vessel is suitable for bulk hygienic chemical and process liquid storage. Designed for vacuum and low-pressure service. Constructed entirely in 316L stainless steel throughout with 8mm shell and 6mm dish walls, heavy duty stainless steel cradle supports, and ANSI/tri-clamp process connections throughout. Suitable for bulk hygienic storage, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 35,000 Litres. Shell ID: 3,000mm. Overall Length: 4,865mm. Shell Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +80°C. Empty Weight: 4,250–4,670kg depending on configuration. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Factory Tested: 2021. Three units currently available: two insulated and one non-insulated. All vessels are brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options. Ijdpjzht Riofx Abnetk

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. Itedpfxjvlpcts Abnek The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: excellent (used), functionality: fully functional, tank capacity: 120,500 l, total height: 20,000 mm, inner diameter: 3,000 mm, outer diameter: 3,300 mm, wall material: stainless steel, wall structure: single-walled, number of chambers: 1, operating temperature: 20 °C, operating pressure: 3 bar, Stainless steel pressure vessel, vertical, insulated Technical data / Dimensions Available quantity: 8 Volume: approx. 120,000 liters Vessel type: Pressure vessel Condition: used Food-grade: yes Design: vertical Internal diameter: approx. 3,000 mm External diameter: approx. 3,300 mm Overall height: approx. 20,000 mm Specific gravity of the medium: 10.00 t/m³ Operating pressure: Overpressure Operating overpressure: 3.00 bar Wall thickness, bottom: approx. 6.0 mm Wall thickness, top: approx. 4.5 mm Wall thickness, shell / cylinder: approx. 3.5-5 mm Operating temperature: 20°C Material / Properties Material, inner shell: Stainless steel Material grade: V2A-1.4301 (AISI 304) External surface: Ground, welded seams passivated Welded seams, internally ground: Yes Insulation Insulation present Insulation thickness: approx. 120 mm Iodpfx Aezvh Dtjbnstk Insulation material: Mineral wool Material, insulation jacket: Aluminum Insulation jacket: Trapezoidal sheet Equipment Base type: Foot ring / base ring Quantity: 1 Mounting: fixed Bottom type, top: Dished end Bottom type, bottom: Dished end Top: 1 x Insulated dome DN 900 1 x Access opening with dome cover DN600 1 x Valve dome cover with the following connections: 1 x Cleaning-ventilation-valve combination (RLV) DN 50 1 x Vacuum valve, spring-loaded with 2 heating elements and thermostat 1 x Safety valve 1 x Burst disc 1 x Thread DN 50 for probe Shell: 1 x Condensate pipe DN 25 1 x Cable protection pipe DN 32 1 x CIP pipe DN 50 1 x Base ring made of Cr-Ni steel (1.4301) with access opening 600 x 600 1 x Spray pipe with protruding ball head Bottom: 1 x Outlet cup DN 300 1 x Outlet with cover cap, chain, and eyelet DN 80 1 x Connection fitting for sampling tap DN10 Documentation Drawing Inspection log Inspection certificate

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 15,000 l, usable tank capacity: 15,000 l, total height: 3,875 mm, outer diameter: 1,750 mm, overall weight: 2,900 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 15,000 Litres. Shell ID: 2,930mm. Overall Height: 3,875mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 2,900kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19635-3. Factory Tested: September 2020. Itsdpfx Aezhn Ngsbnsk Nozzles and fittings include 610mm hinged manway, CIP inlets with dip pipe and TOD clip-on spray fittings, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, flush polished level switch, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. . Please contact us for further information or to discuss delivery and installation options.

Condition: reconditioned (used), Inox tank 500m3 Diameter 8m Height 11.50m Due to their dimensions, the tanks are cut into pieces and welded by us on site. The cylinder is made of AISI316 steel, the upper and lower bottoms are made of duplex steel, but you can order AISI316 steel. The price already includes the cost of welding the tank Iedpfx Absvwmrconotk