Used T-Nut for sale (70,596)

Year of construction: 2021, condition: excellent (used), Insert nut (insert sleeve) machine, Stafast HFM-CF. The machine is configured for M8 nuts with a large flange. The machine is in very good condition. Chjdpfx Afsy Ui Tijgoc Ready for use.

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table -Table surface: 600 x 220 mm -Y-axis: 130 mm movable, hand crank with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 45 mm Chjdpfx Afoqddi Usgec -Total dimensions: 690/490/H300 mm -Weight: 72 kg

Condition: good (used), T-nut, screws, grub screws, for Bosch profile, construction profile, aluminum profile, aluminum T-slot profile -T-nuts: 22 x 12 mm slot 8, with spring ball, 30 pieces -Thread: M5 -Groove width: 8 mm -Dimensions: 22 x 12 mm, see photos -Price/Quantity: 30 pieces -Price: 8 euros net for 30 pieces Chedpfx Afjymb Axjgsc -Number: 9690 pieces in total -Transport dimensions: 600/400/H200 mm -Weight: 101 kg

Condition: used, Year of construction: 1988, plate width 2500 mm Codpfx Afoy Ty Rvegohc plate depth 4000 mm plate height 345 mm no. of flutes 11 2 weight of the machine ca. 7000 t

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, ESTRELLA DN 1000 GLASS-LINED PRESSURE NUTSCHE FILTER High-quality pharmaceutical/chemical pressure nutsche filter manufactured by Estrella AG, Switzerland. Manufacturer: Estrella AG, Ettingen, Switzerland Year: 1994 Type: Pressure Nutsche Filter / Pressure Filter Chedou U Afuopfx Afgjc Diameter: DN 1000 Filter area: approx. 0.75 m² Material: Steel, highly acid-resistant, glass-lined Glass lining quality: ESTRELLA 2000 The unit is equipped with a heavy-duty hydraulic lifting and tilting system for opening the vessel. The hydraulic system is manually operated and integrated into the robust steel frame. Main equipment: - DN 1000 pressure nutsche filter - Approx. 0.75 m² filtration area - Acid-resistant, glass-lined steel construction - ESTRELLA 2000 glass lining - Large, hydraulically lifted and tiltable top cover - Manual hydraulic pump - DN 1000 x 370 top cover - DN 1000 x 550 center section - DN 1000 x 370 bottom section - Filter / perforated plate - 2 x DN 100 connections with sight-glass fittings - 3 x DN 50 connections on top cover - DN 50 bottom connection - Additional fittings and pressure gauge - Heavy-duty steel support frame According to the original manufacturer documentation, the ESTRELLA 2000 glass lining was high-voltage tested for porosity in accordance with DIN ISO 2746. The glass-lined surfaces are visually in very good condition. The blue enamel lining shows a clean and well-preserved appearance. The machine originates from pharmaceutical production. Original Estrella documentation, drawings, and historical manufacturing documents are partially available. Further technical documentation is currently being located and will be supplied if available. The original purchase price in 1994 was CHF 59,218 net, excluding transport and taxes. Inspection of the unit is possible at our warehouse in Switzerland by appointment. CYCRON GmbH Switzerland

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: Milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 14 mm, slot spacing 50 mm -Rotatable. Manually operated with 6 mounting screws. -tiltable and swiveling: via cranks Cedpfxshubc Ne Afgjhc -Fits Deckel Mikron WMW and other milling machines -Overall dimensions: 700/600/H345 mm -Weight: 198 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 400 x 600 mm -T slots: Slot width 12 mm Codeb A Iyuopfx Afgjhc -rotatable -tiltable and swivelling via cranks -Fits Deckel Mikron WMW and other milling machines -Weight: 200 kg -Quantity: 1 available Price: per piece

Condition: good (used), Year of construction: 1982, Dimensions 3,620 x 1,600 mm Plate thickness 245 mm with base – working height 780 mm longitudinal slots 34 mm cross slots 18 mm Weight approx. 5,000 kg Chedpfx Afjx T Dbregoc PRICE ON REQUEST!

Condition: ready for operation (used), Opelka Berliner fryer Donuts 12 fryers for sale with 20 racks with 18 trays each Chedexwy E Eopfx Afgoc

Condition: used, machine/vehicle number: W4X131V07295, Year of construction: 2019, operating hours: 2,384 h, load capacity: 2,000 kg, fork length: 1,150 mm, empty load weight: 800 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Fork length: 1,150 mm Chodpfx Afjz Dfqwsgjc MACHINE DETAILS Battery: 24 V, 3 PzS, 375 Ah Battery voltage in idle state: 24.7 V Dimensions & Weight Dimensions (L x W x H): 1,900 x 800 x 1,000 mm Own weight: 800 kg Service valid until: 09/2027 UVV (occupational safety) valid until: 09/2027 Operating hours: 2,384 h EQUIPMENT Former Linde full-service unit Battery charger All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of non-timely collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 452

Condition: good (used), Year of construction: 2019, functionality: fully functional, X.mill M640 Eco machining center with Si 808D Advanced TTL Table dimensions 750 x 360 mm Table load capacity 500 kg T-slots (number x width x spacing) 3 x 18 x 100 mm Chjdpfxjz Iw Nas Afgsc Distance from spindle nose to table 80 - 580 mm Travel ranges X / Y / Z: 640 / 400 / 500 mm Main spindle spindle speed 10,000 rpm Main spindle spindle overhang 430 mm Main spindle spindle taper BT 40 Rapid traverse X / Y / Z 36,000 / 36,000 / 24,000 mm/min Feed rate Working feed rate X / Y / Z 10 - 12,000 mm/min each Number of tool positions 12 Tool diameter 55 (101) mm Tool length (max.) 200 mm Tool weight (max.) 8 kg Tool change time chip to chip 9 s Tool change time tool to tool 7 s Positioning accuracy ± 0.01 mm Repeatability accuracy ± 0.005 mm Main drive 11 kW Main drive, constant load 7.5 kW Dimensions (L x W x H) approx. 2.3 x 1.8 x 2.3 m Weight 4,200 kg The machine can be inspected under power by arrangement.

Condition: used, machine/vehicle number: W4X131Y08956, Year of construction: 2021, operating hours: 1,801 h, load capacity: 2,000 kg, fork length: 1,150 mm, empty load weight: 800 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting capacity: 2,000 kg Csdoz Dfqdjpfx Afgjhc Fork length: 1,150 mm MACHINE DETAILS Battery: 24 V, 3 PzS, 375 Ah Battery voltage in idle state: 24.6 V Dimensions & Weight Dimensions (L x W x H): 1,900 x 800 x 1,000 mm Dead weight: 800 kg Service valid until: 09/2027 UVV (occupational safety) certificate valid until: 09/2027 Operating hours according to display: 1,801 h EQUIPMENT Former Linde full-service unit Fronius battery charger All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 331

Condition: used, Year of construction: 1979, Storage location: Supplier Chodpfxez Iywyo Afgoc

Condition: good (used), 1 x Mono doughnut fryer. model FG059-B02 Cedpfsy S Td Hjx Afgehc

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm Chedpfx Aey Nypkjfgoc strip thickness: 0,4 - 3 mm No. of strips: max. 11 coil weight: max. 25 t coil OD: max. 2.000 mm mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019

Condition: used, Year of construction: 1993, operating hours: 9,924 h, load capacity: 2,500 kg, lifting height: 3,800 mm, fuel type: gas, gearing type: automatic, Equipment: head guard, * STILL R 70-25 * Year of manufacture: 1993 * VW 1.6 engine * Cylinder head gasket defective Chsdpfx Afjzdwtyogec

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Cjdpfxewric Ee Afgjhc

Condition: good (used), Offer 25348 Technical Specifications: - Plate length approx. 5500 mm - Plate width approx. 2000 mm Chedpfx Afjxu Evwsgjc - Plate height approx. 350 mm - Thickness of top plate approx. 80 mm - 8 pcs. T-slots in table surface, length 5500 mm - Center distance between T-slots in table surface: 255 mm each - Center distance of T-slots from outer edge: 110 mm - T-slot width approx. 40 / 60 mm - T-slot depth approx. 62 mm - Required space: L 5600 x W 2020 x H 350 mm - Weight approx. 10,200 kg

Condition: used, weight / kg taper MK / Set of 3 clamping blocks with T-slots Length: 1000mm Width: 80mm Height: 160mm T-slot size: 32 x 18 Codpfovcd N Ajx Afgjhc T-slot height: 32mm Clamping plate – clamping block – clamping table – clamping arm – T-slot plate

Condition: used, Clamping table, T-slot table, milling machine table, drilling machine table, boring machine table -Clamping table: Drilling machine table Milling machine table T-slot table Cjdpjul H Euofx Afgehc -Table surface: 800 x 550 mm, height 195 mm -Groove width: 28 mm, groove spacing 250 mm -Dimensions: see photo technical drawing -Total dimensions: 800/550/H195 mm -Weight: 630 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping table: milling machine table T-slot table Chsdpfx Aeqddkvsfgec -Table surface: 300 x 300 mm -Y-axis: 50 mm movable, rotary wheel with fine adjustment, see photos -T grooves: groove width 12 mm, groove spacing 80 mm -Total dimensions: 420/330/H90 mm -Weight: 48 kg

Condition: good (used), Offer 25435 Technical Data: - Plate length approx. 3500 mm - Plate width approx. 1750 mm - Plate height approx. 350 mm - Rectangular tubes bolted on left and right, each 200 mm - Top plate thickness approx. 80 mm - 6 T-slots in the table surface, length 3500 mm Codpsx Dmfrofx Afgshc - Center distance of T-slots on the table surface: 250 mm each - Center distance of T-slots from outer edge: 125 mm - T-slot width approx. 35 / 60 mm - T-slot depth approx. 60 mm - Space requirement: L 3500 x W 2100 x H 350 mm - Weight approx. 4200 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DELEM DA 69T control system The machine was distributed by Knuth and manufactured in Turkey. Press force 135 t Bending length 3,100 mm Distance between uprights 2,600 mm Overhang 410 mm Stroke 265 mm Opening width 485 mm Table width 108 mm Travel of X-axis 700 mm Rapid traverse 120 mm/s Bending speed 9 mm/s Return speed 95 mm/s Drive power Main drive 15 kW Hydraulic tank volume 250 l Chedpfx Ajz Hmxuefgsc Dimensions (L × W × H) 3.95 × 1.95 × 2.81 m Weight 9,000 kg Some punches and dies are included in the scope of delivery (see pictures). Inspection with the machine running is possible.

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt, and safety enclosure / Machine in very good technical condition Year of manufacture: 2017 Injection unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1,984 bar Dosage volume: 226 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 510x510 mm Platen size: 740x740 mm Ejector: hydraulic Clamping system: toggle Control system: B&R - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (available for an additional charge) Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor with inverter drive Central lubrication Machine equipped with cylinder / battery with compressed nitrogen (extra charge for high-speed operation) Wemo 6-5 xDesign robot Year of manufacture: 2017 4-axis robot: 3 axes driven by electric servomotors Robot safety package included Robot with adapter, Wemo WCS-R conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Csdoz Ipfmopfx Afgohc Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10 x 1.97 x 2.60 m Drive: Pump/motor: 11.5 kW Heating capacity: 11.3 kW Total power: 22.8 kW All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: 25,000.00 EUR net (price without robot)

Year of construction: 2008, condition: like new (used), PERISSINOTTO 45Kw pump. Production 25 cubic meters / hour Codpfx Aou Avu Ujfgohc No.2 dryer screen vibrators are missing, we can supply them new, price separately.