Used Nitrogen for sale (330)

Condition: used, Year of construction: 2003, total width: 4,420 mm, total length: 1,500 mm, total height: 2,700 mm, Applicable material: Food Empty weight: 1.200 kg Manufacturer: Gualapack Model : CHP 40/3 Year: 2003 Type : Doypack bag filler, sold with laminar flow.   > > Video available on request.   Electrical supply : 380 V three-phase/50 Hz. with separate neutral and earth conductor. Pneumatic supply: Compressed air 6 to 7 bar (atm.). Filling capacity = max. 1500 ml Filling temperature: 90°C max. Sachet production: By automatic feeding system Cap feeding : By vibratory unit and cork feed chute. Iiodpex Atu Dsfx Affsk Packaging dimensions: Max. width 120 mm / Max. height 270 mm. Max output : 40 pieces / min   Operating principle Automatic loading of sachets onto the turntable. The filling date or use-by date is printed on the pouch (or other information). Filling station: 1) Suction of air from the sachet (using a vacuum pump) / 2) Filling of product, taking into account the capacity of the sachet / 3) Filling of the sachet with air or gas (nitrogen) if there is a risk of bacteriological problems with the product. Apply the cap to the sachet and pre-tighten the cap Final tightening of the cap to the prescribed torque. Check the position of the cap to see if it is correctly screwed on or if it is loose. The sachet is unloaded onto a belt conveyor for evacuation from the machine.   Overall dimensions : Width 150 cm Length 441.50 cm Height 270 cm Weight : 1200 Kg  

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature cycling Temperature shock testing is used to test the resistance of components, devices, and other products to rapid changes in ambient temperature. Iodpox Exmtjfx Affeik The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for safe guidance of the car Cart load capacity 50 kg for VT3 7012 S2 All-around grilles in the car secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature exchange unit Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Nominal voltage: 400 V Nominal power: 10 kW Nominal current: 25 A Refrigerant: R452A Cooling unit: Water-cooled Shock cooling (nitrogen cooling) via customer-supplied nitrogen External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Operating panel: IP 20 Control cabinet: IP 54 Temperature test parameters for single-chamber operation | Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class ...Temperatur Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: ±2 K in steady state Temperature deviation over space: ±2 K in steady state in the car Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe opening: 67 mm Year of manufacture: 2000 Operating hours: 104,382 Weight: 1000 kg Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), SLM Solutions Model: SLM 280 HL For sale is a professional metal 3D printer SLM 280 HL by SLM Solutions (Lübeck). The machine comes from industrial use, is fully documented, and is delivered including nameplate data and technical documentation. The SLM 280 HL is designed for 24/7 operation and is suitable for aluminum, stainless steel, tool steel, cobalt-chromium, and many other metal powder materials. Included modules and accessories: - AMC 330 WB Air Management/Filter Module - HRS050-AF-20-M Chiller Unit - DC 1.5 KAESER Compressor / Compressed Air Module Technical Data (Excerpt) Machine Weight: 1,245 kg Dimensions (without accessories): Width: 1.7 m Height: 2.0 m Depth: 1.1 m Build volume: 280 × 280 × 250 mm (optional depth 350 mm) Electrical connection: Power consumption: 15 A Building-side protection: 32 A Control voltage: 24 V DC Heating power: 1,200 W Protection class: IP50 Power input: 4.7 kW (single optics) / 8.0 kW (twin optics) Media supply Argon Operating pressure: 6 bar Flow rate (purge): approx. 130 l/min Flow rate (build process): approx. 3 l/min Quality: DIN EN ISO 14175 – Class 4.6 (≥99.996 %) Compressed air Operating pressure: 6 bar Flow rate: without nitrogen generator: approx. 100 l/min with nitrogen generator: approx. 500 l/min Quality: ISO 8573-1:2010 Class 1:4:1 Cooling water Medium: distilled water Primary circuit: Pressure: 4 bar Flow rate: 0.3 l/min Supply temperature: 18–20 °C Secondary circuit: Min. pressure: 2 bar Max. temperature: 40 °C Volume: 1.7 m³/h Ijdpfxjx Agt Hs Affoik pH value: 5.8–7.0 Operating conditions Ambient temperature: 20–25 °C Max. relative humidity: 60 % Designed for continuous (24 h) operation (Weight approx. 1,245 kg). Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (see picture) - SLM 280 HL machine - Control cabinet - Process chamber - Internal control panel with screen - Available documentation, parts lists, manuals (Subject to changes and errors in the technical data!) We will be happy to answer any further questions by phone.

Condition: excellent (used), Year of construction: 2011, Schwingenschlögel LNG tank filling station Methan Gas Cryogenic tank gas tank trailer German Cryogenic gas semi-trailer for LNG (liquid methane). Iijdpfxetzcdrs Affek Tank filling station Manufacturer: Schwingenschlögel EU approval. Year: 2011 Full working condition with valid certificates. We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be happy to provide you with a quotation or give you more information about other pressure vessels. To discuss the possibilities, please contact us by phone or e-mail.

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Iiedpfx Aohv Hkasffek Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: good (used), Similar in operation to Dohmeyer CryoRoll freezer. Packo developed these freezers to be used for high performance IQF freezing of small pieces of meat, seafood, cheese, pizza toppings, fruits and vegetables. The rotary drum is injected with CO2 down to -60 degrees C or nitrogen down to -110 degrees C. This unit was used in a cheese manufacturing facility which has recently closed, they were running shredded and diced cheese through the machine. We have a large quantity of conveying and machinery available from this facility. Iisdexz E Ndopfx Affjk

Year of construction: 2015, condition: used, Applicable material: Chemicals Documents Technical information Physico-chemical separation / distillation unit. Year : 2015 Installation ATEX 3G IIBT4, inside the installation: zone 1G Operating mode: continuous – batch – semi-batch. Pressure: Vacuum – 3 barg max Boiler size: 50 Litres (Possible 200 Litres) Flow rates: Approximately 180 Kg/hr feeding a water/ethanol mixture (90/10) at atmospheric pressure with a reflux rate of 5. Nombre de plateaux théoriques : 20 - Alimentation possible en 3 points : 4 lits de garnissage structuré, 4 redistributeurs de liquide (dont 3 avec recentreurs) Dimensions: Unit made as a skid, in hot-dip galvanised steel frame with dimensions 2400 x2400 x 4000MM high. Utilities / sources : Steam: 3 bar eff 143°C 30 to 80kg/h Cold water 25-30°C : 2-5m3/h Iiodpfx Asx Artfoffjk Chilled water 5-10°C : 0.5m3/h Compressed air : 6bar eff Nitrogen inerting : 4.5 bar eff Electricity : 400V tri 50 Hz IT : 5kw

Condition: excellent (used), Year of construction: 2009, Arburg 370S 700-100/100 / 2K machine / operating hours: 33.544 in automatic mode / very good technical condition Year of manufacture: 2009 injection unit: Screw diameter: 30 mm injection weight: 65 g Injection pressure: 1390 bar Metering volume: 71 ccm Clamping unit: clamping force: 70 t tie bar distance: 370x370 mm size of clamping platens: 510x510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: 2K machine Operating hours: 33.544 in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 2 Control with hot runners Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Parallel movements The vertical injection unit - screw diameter fi 20 mm (29 g/hp) Iijdpfxjxz Atme Affjk Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Machine with the built-in conveyor belt Arburg and original sorting flap There is a possibility to buy an original Weber turntable It is possible to change screw diameters in both injection units for the screw diameters recommended by the manufacturer Dimensions: Weight: 4440 kg Length/width/height: 3.48x1.58x2.97 m Drive: Pumps/motor: 15 kW Heating power: 4,9 kW Total power: 19,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 1994, Three-stage water degassing system for water degassing and CO2 impregnation. The raw water enters the first degassing tank through an injector nozzle. The high flow velocity causes oxygen and nitrogen to be torn out of the water jet and escape from the top of the tank. This process is repeated in the second degassing tank. In the third tank (impregnation tank), after entering through the injector nozzle, the water is mixed with the CO2 pressure in the upper part of the tank, which is under impregnation pressure. Additional title: multi-stage cold deaeration with impregnation Iisdsxzqt Ispfx Affok Base construction: mounted on stainless steel frame Features: 3 containers (each with pressure gauge); 3 centrifugal pumps; control cabinet with control panel; pipes with various fittings

Condition: excellent (used), Year of construction: 1991, We can offer you CO2 carbon dioxide gas used storage tank vessel Iijdpsk Eac Djfx Affsk Volume 21050L; Working pressure 22 bar; Export from EU We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axes: 100 m/min B / C axes: 540 °/s Acceleration Simultaneous: 17.3 m/s² Iodpfx Afex Dkymefjik X / Y / Z axes: 10 m/s² B / C axes: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser power: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Total operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optic with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including rear-side safety guard Scrap conveyor belt 4× configurable control interface Manifold block for 8 pneumatic clamps per side 2× loading status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without touch probe) Measurement data processing 3× horizontal jig interface Extraction ducting Protective enclosure for rotary changer, including safety guard, 1 window, and column for control desk Status signal tower top & bottom Video monitoring with camera Monitor holder Special installation KLH chiller

Condition: like new (used), Year of construction: 2023, functionality: fully functional, We have 5 umoe storage containers for sale. 3 pcs of 20 feet containers and 2 pcs 40 feet containers. 3 of them are not used and stored with 35 bar nitrogen. 2 of them are used, but only a few weeks. One is stored with hydrogen. 25 bar pressure. Iiedpsxgn S Sofx Affjk Full documentation package available

Year of construction: 2016, condition: used, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) Iijdpfx Afox Ai Tijfjk B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVDPump support benchATEX: Ex-d-IIB-T4 – IP55Power: 11 kWAtmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: excellent (used), Year of construction: 2011, Arburg 370H 600-100 / Hybrid Machine Year of manufacture: November 2011 Injection unit: Screw diameter: 20 mm Injection weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 cc Clamping unit: Clamping force: 60 t Type distance: 370 x 370 mm Clamping platen size: 510 x 510 mm Ejector: electric Clamping unit: toggle-type Ijdpfxsxz Atgo Affoik Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 1 Control system with hot runners x 12 Hardened injection unit - bimetal Main machine motor - servo motor driven by an inverter - energy saving The injection unit is driven by the servo motor Driven by an inverter Machine with cylinder/battery with compressed nitrogen (additional charging for fast work) Central lubrication Dimensions: Weight: 3190 kg Length/Width/Height: 3.68 x 1.45 x 2.04 m All offered machines are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: used, mileage: 33,858 km, power: 210 kW (285.52 HP), first registration: 11/2007, fuel type: diesel, overall weight: 16,500 kg, axle configuration: 2 axles, color: green, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, soot filter, Errors and prior sale excepted! Internal number: 1361. L269745 ----EQUIPMENT * Rifle mount for G36 model * Overhang adjustment to MassX = 1650mm * Single tires 14 R 20 * 18.0 ton truck * From B/L 249803 * Exhaust system relocated to the rear * Exhaust monitoring for nitrogen oxide (NOx) * Towing eyes front/rear * AdBlue tank, plastic * AdBlue tank relocated to the front behind the front fender * 2-pin trailer socket VG96923 * Trailer/towing coupling, ring spring * Exhaust muffler, tailpipe downwards * Deactivation of the warning signal on the speedometer display * Electrically adjustable exterior mirror on the driver's side * Axor2-R, MB * Single-pole NATO battery main switch * Battery maintenance socket * BBA special order control * Mounting parts on the frame or perforated grid * Standard passenger suspension seat, lsringhausen * BlueTec 4 (Euro 1V) * Round & pivoting roof hatch * Front axle differential lock * Rotating ring frame * Electrics for body interior lighting * Reinforced rear cab suspension * Driver's suspension seat * Electric windows, driver and passenger doors * Short front suspension arm BM 940.890 * Flag holder * Flame start system * Aerodynamic front mirror * Exhaust relocated to the rear to measure: 1175 mm * 1 additional rifle holder * Exhaust gas monitoring (NOX) Iijdswm Txmspfx Affok * Storage above the windshield * Axle ratio i = 3.692 * 35-liter AdBlue tank * 15-pin trailer socket * 7-pin trailer socket VG95234 * 2-wire trailer brake * Anti-lock braking system (ABS) * Deactivation of the NOx sensor warning signal on the display * Outer planetary axle * Automatic hook coupling * Lockable battery box * Leaf spring suspension * Paint finish: BRONZE GREEN, MATT * Front differential lock * Bogie * Heated compressed air dryer * Grounding screw * Cab tilt pump relocation * Standard cab suspension * Short cab suspension BM 940.890 * Reinforced rear cab suspension * External start/2-pin power socket (STANAG) * Aerodynamic front mirror, front * Speed limit 90 km/h, EC * Hydraulic transmission shift * Weight variant 16.5 t (7.5/9.0) * Global Cockpit * Rear axle H712.0 t, crown gear 410 * Rear spring, 13.0 t, hard * Air conditioning * Instrument cluster display, graphics-capable * Main fuel tank moved forward to a custom length of 625 mm * Fuel prefilter with heated water separator * LS6/LS8 steering * Air tank and air dryer relocated to the frame * Mercedes-Benz OnRoadService * Center seat with seat belt * MODEL GENERATION 1 * Engine OM 902 LA 210 kW Blue Tee * Power take-off, countershaft, DB (2c) * On-Board Diagnostics1 with NOx Control * POLLEN FILTER * Wheel configuration 4x4 * Wheelbase 4200 mm * Roof rack bars * Short rear extension (FHS) * Muffler, SCR catalyst, stainless steel * Window camouflage * Indicator light protection grilles * Leatherette seat upholstery * Electrically adjustable driver's side mirror * Stone chip protection grille for headlights * Folding stone chip protection grille L30 * Steel bumper * Noise reduction measures, EG96/20 * Gearshift Hydraulic * Gearbox lock for PTO * GTO 28-5/4.25-0.81 * Main tank 300L, steel * Hydraulic fluid. Pentosin CHF11S * Tilt hydraulics for temperatures below -25°C * Instrument cluster (pixel matrix display) * Front coupling head for air refilling * Bumper paint finish * Left-hand drive * Parabolic spring 7.5t asymmetrical * Pollen filter * Flatbed chassis * PSM, body and trailer CAN, IS011992 * Reinforced frame head for special attachments * 6-cylinder in-line engine * Manual transmiss

Year of construction: 1998, condition: used, Technical details: temperature: 200-210 °C throughput speed: 1000 mm/min Iisdpfxeu Rnd Ds Affjk max. workpiece length: 200 mm total power requirement: 50 kw weight of the machine ca.: ca. 2,0 t - Soldering device for circuit boards (e.g. Type: SMD &/or Composite design) and drying SMD adhesive. - Soldering unit works with functions -->intake - flow - soldering - cooling - With software functions. - Can be integrated in a production line. Further technical details: - Inert gas with Nitrogen 30 m³/h; 6 - 10 bar over pressure - Water requirement: 20 Liter/min; 2 - 5 bar over pressure - Exhaust quantity: 1000m³/h - electr. Operation capacity: 12 kW - room required: L: 6500 + loading station 2000 x W: 1400 x H: 2100mm Supplementary equipment incl.: - Automatic stacker LSB 03 with reloading device and discharge conveyor for intake of e.g. circuit boards - Plant is applicable as spare part deliverer or for refurbishment or rebuild. - Documentation available - Machine is CE98 certified On sale as is. *

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Iedpfx Afoh S H Rrsfoik Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: Bodor Thinker 3.0 software, laser type: fiber laser, laser source manufacturer: MAX, laser power: 12,000 W, sheet thickness (max.): 40 mm, table length: 4,000 mm, table width: 2,000 mm, power: 12 kW (16.32 HP), Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Working area 4000mm*2000mm Max. positioning speed 110 m/min Bodor Lightning perforation - function ● Exchange time of exchangeable tables 16 s Basic parameters Automatic adjustment of cutting O2, N2, air gas pressure Automatic focusing of laser head ● Ergonomic remote control (Bodor ● Mango®) Automatic collision avoidance ● Anti-vibration function of sheet metal ● Cutting quality Cutting parameter database ● Slag protection ● Management software ● Cost savings 4 Nozzle for uniform gas flow ● Maintenance reminder ● Services BodorCloud services ● WIFI wireless connection ● Max. acceleration 1.5G Isdjx Ag Udepfx Affjik Table load capacity 1886 kg Dimensions of the device - gross floor plan without 11388*3235*2311 mm peripherals Version Machine weight 7400 kg Z-axis travel 370 mm (max.) Positioning accuracy ±0.05 mm Repeatability ±0.03 mm Laser source MAX Photonics Optical system Laser head Bodor Genius Welded table structure Welded segments Linear guides and racks Bodor Mechanical system X-axis, Y-axis, Z-axis - Servo Quality manufacturer Protective housing ● Control system Bodor Thinker 3.0 Display 21.5 inches Circuit breaker Schneider Relay Schneider/ABB Electrical system Proportional gas valve SMC/AVENTICS Cutting valve oxygen SMC Nitrogen cutting valve SMC Alarm ● Water cooling ● Peripheral system Emission removal Filter extraction Available in first quarter of 2026

Year of construction: 2011, condition: used, Applicable material: Food Empty weight: 600 kg Dimensions (LxBxH): 150 x 120 x 230 cm Cargo space capacity: 950 l Cooling starts at: 120 °C Volume: 950 l Manufacturer : Packo Inov NV Type: Cryofreezer / Batch freezer Year of manufacture : 2011   Total volume : 950 L Dimensions : 150 x 120 x 230 cm Iijdpfx Afox Ai Tcjfsk Supply voltage 3x400V + N – 50Hz Minimum temperature set point: – 120°C Weight : 600 Kg Materials: 304 L stainless steel Full technical file: available in digital version Refrigerant : Liquid nitrogen   Previous use: 0.5 or 1L bottles containing Biological active ingredient. 0.5L bottle : o Dimensions: 72 x 72 x 180 mm (WxDxH) o Maximum capacity: 32 bottles 1.0L bottle : o Dimensions: 90 x 90 x 220 mm (WxDxH) o Maximum capacity: 32 bottles  

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Iijdpfxexz Ac Uj Affok Control: SELOGICA - touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Year of construction: 2004, condition: good (used), functionality: fully functional, machine/vehicle number: 2340-F / 04071226482, Dimensions: System 7mx2mx2m; handling can be disassembled into smaller units of 2mx1mx1m Weight: System approx. 1 ton; other handling components each 100kg Iijdex Adx Hepfx Affek Equipment: incl. Asys solder frame handling with lift and ejector - Power connections: 400V; compressed air 6 bar; nitrogen 6 bar - Interfaces: Smema for handling; exhaust air 200mm - Working area: according to Seho original - Drives: according to Seho original equipment - Control: according to Seho original equipment - Miscellaneous: Full tunnel system with nitrogen

Condition: excellent (used), Year of construction: 2001, Used Bottling Line | Used Beverage Line | Soft Drinks NP 619 | PET KRONES LINE Speed: 12,000 Bph KRONES CONTIFORM 2001 BLOW MOLDING MACHINE Siemens: S5 Number of cavities: 10 Preform tipper Preform feeder AIR NATRI STM 2011 COMBIBLOC KRONES SUOPERBLOC 1993 VK PET 100 SV rinsing machine 100 pliers KRONES filling machine Capper 18 heads 1810 format Roll-fed labeler KRONES MIXER 1992 Capacity: 45,000 L/h Ability to produce CO2 Iijdpfx Afjtr Exujfok Nitrogen Saturate and mix water with syrup DIMAC STAR F 2011 BUNDLER number of rows: 2x3, 3x4 DEVIDER 2010 PACKAGE TAPES 2001 INNOPAL KHS PALLETIZER 1999 single entry FRANPACK 1999 PALLET WRAPPER Type: rotary arm Pallet lifting

Condition: excellent (used), Year of construction: 2011, Arburg 520S 1600-290/100 / Production line with Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of construction: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air valve x 3 Hydraulic, needle core pull, controlled by a proportional valve x 2 Reinforced injection units - bimetal Proportional valves on injection units - precise spraying Machine with two cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical spraying unit: ⌀25 mm - 45 g/hp Original turntable Purchase of the turntable for an additional charge Robot Wittmann W823 Year of construction: 2015 5-axis robot: 3 axes are driven by servo motors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, protective housing Purchase of the robot for an additional charge Dimensions Weight: 6720 kg Length/width/height: 4.41x1.84x3.20 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Iedpfxoxz Ab Ds Affoik Price: On request

Condition: used, Year of construction: 2000, COMPLETE BOTTLING LINE PET 18,500 BPH Product: PET Bottles Speed: 18,500 BPH (2 L bottles) PET Preform Tipper VE.CO. – Year 1997 Model: 30L917 PET Preform Orientator Sidel – Year 1999 Model: XMMC94 PET Blower Sidel – Year 1999 Model: SBO14 Number of molds: 14 Air recovery system Air Conveyors Lanfranchi – Year 2007 Monoblock Sidel-Simonazzi and Capper Arol Model: EUROSTAR RAA282 – Year 1985 Direction: Clockwise Rinser 50 grippers Manual carousel height adjustment Fixed nozzle 1 treatment with water Fillers 80 valves Filling type: Isobaric Valve type: Mechanical Valve functions: Degassing and sanitization Electric tank height adjustment Capper Arol 10T – Year 1998 Model: TS EURO/K10T.350O Manual head height adjustment Cap type handled: 3-START HEXALITE Cap dimensions: Ø 28.6 mm h: 10.5 mm Cap feeding system: Pick & Place Nitrogen Doser Terboven – Year 2008 Model: ISTE-CON 5 Cap Elevator P.Q.L. Mechanics – Year 2011 Model: 09B3 Type: Pneumatic Level and Cap Inspector Heuft (Spectrum) – Year 2013 Iisdpswditnsfx Affsk Model: HBBVXTXXX Inspection type: Cameras Checks the fill level; cap presence; incorrectly screwed caps Complete with ejector Labeller Krones – Year 1998 Model: CONTIROLL Direction: Clockwise Electric head height adjustment 15 plates with mechanical cam Number of stations: 1 Labeling type: Roll-fed Label types: WRAP-AROUND Label Presence Inspector Heuft (Reflexx) – Year 2023 Model: ONE Inspection type: Cameras Lumonics Laser Marker – Year 2009 Model: SL301 Bottle Conveyor Belts Procomac – Year 2000 Model: P 3233/1A Divider Procomac – Year 2000 Model: P3227 Shrink Wrapper Zambelli – Year 1999 Model: LFT3657 Version: Film launch Type: Film only Shrink Pack Conveyors Procomac – Year 2000 Model: P 3233/1A Batch Coder Markem – Year 2010 Model: 9040 Type: Inkjet Handle Applicator Comag – Year 1999 Model: H65/1 Bundle Divider L.M. – Year 2000 Model: 28809 Palletizer ACMI – Year 1999 Model: RASAR C/1350 Type: Pusher Double infeed Pallet magazine Interlayer System Pallet Wrapper Tosa-Acmi – Year 2012 Model: 120+475 Wrapping type: Rotating arm Top sheet dispenser Pre-stretch Pallet Printer Eidos – Year 2009 Model: 7P6NRSA General Information: Supported bottle dimensions: Ø min: 89 mm; Max Ø: 95 mm Height min: 145.90 mm; Max height: 344 mm

Condition: excellent (used), Year of construction: 1998, Krauss Maffei KM 110-700 C2 Year of manufacture: 1998 Ijdpfx Afexzz Ddsfjik Injection unit: Screw diameter: 45 mm Injection weight: 278 g injection pressure: 2336 bar Metering volume: 305 ccm Clamping unit: clamping force: 110 t tie bar distance: 470x470 mm size of clamping platens: 745x770 mm ejector: hydraulic clamping unit: hydraulic Control system: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Control with hot runners x 12 Injection unit hardened - bimetal Parallel movements Proportional valve on the injection unit - precise injection Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) The machine has been regularly serviced by the authorized service Krauss Maffei in Switzerland Dimensions: Weight: 6200 kg Length/width/height: 4.66x1.51x2.19 m Propulsion: Pumps/motor: 18.5 kW Heating power: 16 kW Total power: 34,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request