Used Scrap Metal for sale (34,974)

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here, we offer a complete Desktop Metal 3D printer system. 3D metal printer studio system from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D printer Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. Bwodpfxozd Tlle Amrju This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell infills for lightweight strength. 1.2 Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles tailored to each design and material ensure uniform heating and cooling without the residual stresses found in laser-based systems. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, For sale is our Trumpf remaining grid pallet. Bedozd Sfwepfx Amrjwu Dimensions: Suitable for sheet metal with dimensions of 2500 mm x 1250 mm. The pallet is new and unused, but it was stored outdoors and therefore has some surface rust, which will disappear after several uses. Also suitable for transporting wood – firewood. The pallet is lifted with a forklift and emptied via a tilting mechanism. Collection only.

Condition: used, Year of construction: 2015, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 55 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 200 mm, table width: 200 mm, table length: 3,200 mm, throat depth: 320 mm, clearance between the columns: 2,530 mm, retraction force: 160 t, oil tank capacity: 200 l, total length: 3,280 mm, total width: 2,700 mm, total height: 2,000 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, We offer a used Metal Technics 3200/160 E200 press brake, manufactured in 2015. The press is currently in operation in a production environment. It operates in an intermittent cycle, in a single-shift mode – 8 hours. Oil is changed regularly. Bwsdpfxsy Um S Nj Amrou Equipment: PRESS BRAKE Model: 3200/160 E200 Serial number: 48342 Year of manufacture: 2015 Motor power: 11 kW Weight: 11500 kg Includes tooling (punches and rotating die). Punch mounting type: Amada. Equipped with light curtains and two backstops. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Bwodsphvl Tspfx Amrju Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Bwsdpozza Egjfx Amrju Technical data: Manufacturer: PLASTIC METAL S.p.A. Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Condition: used, Chip conveyor, scraper conveyor with coolant tank, BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Width of metal links: 200 mm Distance between carrier bars: approx. 380 mm Length of possible chip discharge: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Bwodpfxshwt H As Amrsu Hopper width at the top: 400 mm Hopper width at the bottom: 170 mm Conveying height – discharge height: approx. 1250 mm Motor power, belt drive: 0.37 kW Mains connection: 400 volts, 50 Hz - Drive of the scraper chain via geared motor - Coolant tank without coolant pump Space requirement L x W x H: 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for the chip transport of a milling machine, lathe, or machining center.

Condition: ready for operation (used), Year of construction: 2021, overall weight: 97 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It utilizes Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 Tool Steel, and operates with a dual extruder system. If you are looking to get high-quality metal 3D printing capabilities, consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details. Bwodpfx Ameyuyz Nsreu • Technology: Bound Metal Deposition (BMD) • Process: 2-step (printing and sintering – no debinder needed) • Build volume: 300 x 200 x 200 mm • Layer height: 50 µm to 250 µm • Build plate: Heated up to 120°C (vacuum-adhered) • Extruders: Dual (metal and ceramic support) • Support interface: Ceramic release layer (manual breakaway) • Materials: 316L, 17-4 PH, 4140, H13 tool steel, copper • Software: Fabricate (automated scaling and sintering profiles) • Connectivity: WiFi / Ethernet Additional equipment • Furnace: Max temperature 1400°C; atmosphere: partial pressure Synthogas (Ar/H2); sintering cycle: 16–24 hours

Condition: new, Year of construction: 2026, machine/vehicle number: MTP-BS260G-2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, control type: manual, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 72 rpm, rotational speed (min.): 36 rpm, total height: 1,900 mm, total length: 1,950 mm, total width: 750 mm, overall weight: 230 kg, Equipment: CE marking, documentation/manual, motor brake, rotational speed infinitely variable, OFFER OF THE WEEK – 5% DISCOUNT! MTP BS260G METAL BAND SAW PROFESSIONAL HORIZONTAL METAL BAND SAW WITH 0–60° SWIVEL CUTTING HEAD The brand-new MTP BS260G Metal Band Saw has been designed for precise cutting of carbon steel, stainless steel, acid-resistant steel, alloy steel, and non-ferrous metals. Thanks to its robust construction, hydraulic downfeed system, and high-quality blade guidance, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, maintenance departments, and engineering companies. The swivel saw head allows precise cutting at any angle from 0° to 60°, providing excellent flexibility for a wide range of applications. The hydraulic downfeed system ensures smooth, accurate, and repeatable cutting performance. STANDARD EQUIPMENT • Integrated coolant system • Hydraulic cylinder with infinitely adjustable downfeed • Manual mechanical blade tensioning system • Carbide blade guides with precision bearings • Swivel cutting head (0°–60°) • Material clamping vice • Infinitely variable feed adjustment • Automatic blade drive shut-off after completing the cut • Technical documentation and operating manual • CE Declaration of Conformity KEY FEATURES • Precise mitre cutting from 0° to 60° • Heavy-duty cast iron saw frame for maximum rigidity • Two blade speeds: 36 and 72 m/min • High-precision carbide blade guidance for extended blade life • Hydraulic automatic downfeed system • Integrated coolant system for improved blade durability • Excellent cutting accuracy and surface finish • Ideal for cutting tubes, pipes, profiles, bars, and solid steel sections TECHNICAL SPECIFICATIONS • Machine type: Horizontal metal band saw • Cutting angle range: 0°–60° • Blade dimensions: 2455 × 27 × 0.9 mm • Blade speeds: 36 / 72 m/min • Feed rate: 0–50 m/min (infinitely variable) • Blade tensioning: Manual mechanical • Downfeed adjustment: Hydraulic, infinitely variable Bwsdpoyr Ndhjfx Amrsu • Vice base height: 1010 mm • Main motor power: 1.1 kW • Power supply: 400 V / 50 Hz / 3-phase • Machine dimensions: 1950 × 750 × 1900 mm • Machine weight: 230 kg SAFETY The machine is equipped with blade guards, safety switches, and an automatic motor shut-off system that stops operation after the cutting cycle is completed or when a guard is opened. An additional safety feature automatically switches off the machine if the saw blade breaks. TECHNICAL SUPPORT We provide professional technical advice, warranty and after-sales service, as well as assistance in selecting the appropriate saw blades and cutting parameters. Transport can be arranged throughout Europe and worldwide. Brand-new machine supplied with a 12-month warranty, fully operational and ready for immediate use.

Year of construction: 2022, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: OWD/492/2022, Equipment: CE marking, For sale is a used Metal Technika OWD-1600 4m optimizer with very low operating hours, approximately 2500 hours. The machine is connected and ready for trials and tests. Net price. TECHNICAL SPECIFICATIONS Performance From 3,200 to 8,250 m/8 hours. Electronics: Controller with a color touchscreen display "MITSHUBISHI". Functions - Full optimization of 30 dimensions in two quality classes, - Creation of cutting programs for different customers, - Cutting at the marked location using a fluorescent pencil, - Trimming the margin (beginning and end of the input material) - Cutting in batches (several pieces at once) - Meters counters: total, change, operator, monthly, - Cutting accuracy ±0.3 mm. Engine: 7.5 KW (saw Ø500 – 140 teeth) Bedpfxjzdf Tpo Amrswu Width of input material 12 - 250 mm max. width/height (250 / 50 mm) Height of input material 12 - 120 mm max. height/width (120 / 120 mm) Length of input material up to 4,200 mm. Lubrication: Oil-based central lubrication system. Output automation Connection for a conveyor belt and a sorting table.

Year of construction: 2023, condition: new, Attachment suited for: Hoisting equipment Bjdpeph Rk Tefx Amrjwu Selling price: € 15.500, US$ 16.480 A scrap magnet for excavator is an electromagnet that is specially designed with very deep magnetic field for sorting out and transporting metal scraps in a junkyard. There is no need to install any extra generator and hydraulic installation on the machine. So you can get rid of the extra hoses and can move the excavator easily Explore the GALEN's new magnet system for detailed information please contact us

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Metal Technika OWD 1600 Optimizer - manufactured in Poland - year of production 2017 TECHNICAL PARAMETERS: - cutting width 250 mm - cutting height 120 mm Bsdpfx Amsrx Rxpsrewu - Capacity from 3 200 to 8 150 mb /8 h - sorting table with 5 knockouts - Electronics Controller with color touch screen display "MITSHUBISHI" - Features - full optimization of 30 dimensions in two quality classes, - creation of cutting programs for different customers, - cutting at the point of marking with fluorescent crayon, - margin cutting (beginning and end of the input material) - cutting in packages (several elements at once) - meters, total, shift, operator, monthly counters, - cutting accuracy ±0.2 mm - Motor 5.5 KW (saw Ø500 - 140z) - Width of input mat 12 - 250 mm max. width / height ( 250 / 50 mm) - Height of input mat 12 - 120 mm max. h/w ( 120 / 130 mm) - Input mat length up to 4,200 mm - Lubrication Oil central lubrication system - Automation at the output Connection for slant conveyor and sorting table

Condition: used, Year of construction: 2007, functionality: fully functional, We offer a Magnetix metal magnet. Type: SWP80 Working width: 800 mm Year of manufacture: 2007 Bodpfjt Uyvrox Amrowu

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Bwedpfx Amozdiz Nerou Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 100 mm, cutting width (max.): 200 mm, type of input current: three-phase, year of last overhaul: 2025, For sale: Metal Technika OWD-1600 Optimizing Saw / Cross-cut Saw, year of manufacture 2018. The machine is fully operational, ready for immediate use – ideal for fast cutting of components in serial production. A major advantage of this machine is its ability to set a cutting schedule for up to 8 positions: you simply set the dimension and the quantity, and the machine automatically performs cutting and proceeds to the next positions without the need for tool changes. Technical Data: Model: Metal Technika OWD-1600 Bwedjyv Ewmopfx Amrju Year of manufacture: 2018 Maximum material width: 200 mm Maximum material height: 100 mm Maximum board length: 3200 mm Feed speed: approx. 30 m/min Saw blade diameter: min. 400 mm / max. 500 mm Motor speed: 2800 rpm Spindle speed: approx. 6000 rpm Power supply: 3x 400V Power: 7 kW Medium: air 6–7 bar Weight: approx. 1500 kg Performance: The machine operates efficiently – for example: - Batch of 8 boards, 12 mm thick each - Board length: 2800 mm - Cutting into 3 elements (approx. 700 mm) - Cycle time: about 10 seconds The machine can be inspected and tested on site. Location: Elbląg / Warmińsko-Mazurskie, Poland For further questions, please contact me.

Condition: new, Year of construction: 2026, functionality: fully functional, SHEET METAL BEADING MACHINE ETB 40 – METAL TECHNICS POLSKA PROFESSIONAL SHEET METAL BEADING MACHINE The ETB 40 Sheet Metal Beading Machine is a robust and efficient machine designed for producing beads, grooves, flanges, reinforcing ribs, and other forming operations in sheet metal. Thanks to its heavy-duty construction, high precision, and a wide range of interchangeable forming rolls, it is ideal for metal fabrication workshops, HVAC duct production, sheet metal processing, and general industrial manufacturing. The machine enables fast and accurate production of repeatable profiles, improving productivity while maintaining excellent quality. KEY FEATURES • Maximum sheet thickness: 4 mm • Powerful 2.2 kW electric motor • Heavy-duty steel construction • 300 mm throat depth • Precise material guidance Bwodpfx Amozkubzerju • Suitable for a wide variety of beading and flanging operations • Quick and easy roll replacement • Ideal for HVAC, tanks, enclosures, and steel fabrication • High manufacturing quality • Machine available from stock TECHNICAL SPECIFICATIONS • Model: ETB 40 • Maximum sheet thickness: 4 mm • Roller width: 165 mm • Throat depth: 300 mm • Roller speed: 15.3 rpm • Motor power: 2.2 kW • Dimensions (L × W × H): 1550 × 510 × 1180 mm • Weight: 341 kg APPLICATIONS The ETB 40 is ideal for manufacturing: • HVAC ducts and fittings • Air-conditioning components • Cylinders and tanks • Machine enclosures • Decorative sheet metal components • Flanges, reinforcing beads and stiffening profiles • Components for the automotive and steel fabrication industries HEAVY-DUTY CONSTRUCTION The machine is built on a rigid welded steel frame, ensuring excellent stability, high precision, and long service life even under intensive industrial use. EASY OPERATION The ergonomic design and intuitive controls allow fast roll changes and quick machine setup for different forming operations. This makes the ETB 40 suitable for both small workshops and high-volume production. TRANSPORT & TECHNICAL SUPPORT We organize machine transportation throughout Europe as well as to countries outside the European Union. Every transport quotation is prepared individually based on the delivery destination. We provide professional technical advice, warranty and after-sales service, and ongoing technical support from our specialists. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. WHY CHOOSE METAL TECHNICS POLSKA? For many years, Metal Technics Polska has been supplying high-quality metalworking machinery to customers across Europe. We provide complete support—from technical consultation and machine selection to transportation, commissioning, and long-term after-sales service. If you would like to receive a quotation or learn more about this machine, please contact our sales team. Visit the Metal Technics Polska website to explore our complete range of sheet metal working machines and discover our latest products and promotions.

Condition: used, AUTOMATIC SHEET METAL BLANKING AND BENDING LINE – USED – CE CERTIFIED Brand: CIMSA – Made in Italy Bedpfjxv Th Rsx Amrjwu Material Specifications • Material: Fe P01 – galvanized – pre-painted • Thickness: 0.6 – 2 mm • Maximum dimensions: 1000 x 2000 mm Line Dimensions • Total length: 25 meters + robot • Maximum width: 6.8 meters Line Composition • Motorized decoiler model SMC 100 • Straightening unit model CR 1000 • Electronic feeder model AP3 1000 • Punching unit consisting of 13 cylinders and 18 punching groups controlled by CNC • Tool change device • Press 60 tons, width 1000 mm, 50 kW, complete with: - die insertion trolley - sheet metal support - scrap evacuation conveyor belt • Blade change system on the shearing station • Platform with piece translation and tilting system • Transfer station adjustable in width by handwheel • Flipping device for piece turnover • Longitudinal positive/negative bending station • End positive/negative bending station Automation: ABB robot for automatic piece unloading

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: hydraulic, stroke rate (max.): 8 1/min, throat depth: 355 mm, punching force: 92 t, punching diameter: 30 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, table length: 500 mm, table width: 500 mm, overall weight: 2,200 kg, total length: 1,860 mm, total width: 790 mm, total height: 1,900 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 12 months, Equipment: CE marking, documentation/manual, electrical contact length stop, emergency stop, foot remote control, notching unit, Metal Technics Polska MTP IW90 hydraulic ironworker – NEW – versatile steel processing in one machine A practical solution for metal fabrication workshops, steel construction and maintenance departments. The MTP IW90 combines punching, flat-bar and plate shearing, section cutting and notching in one hydraulic machine. The supplied bending attachment also enables short plate bending below 500 mm width. Several operations can be carried out at the same workstation, reducing handling between separate machines. TECHNICAL DATA • Year of manufacture: 2026 • Punching force: 900 kN • Punching capacity: Ø30 mm hole in 20 mm steel • Maximum cutting thickness: 20 mm • Maximum cutting length: 480 mm • Material tensile strength: up to 450 N/mm² • Shearing angle: 8° • Ram stroke: 80 mm • Nominal stroke rate: 8 strokes/min • Throat depth: 355 mm • Main motor: 5.5 kW • Supply: 400 V, 50 Hz, three-phase • Machine dimensions (L × W × H): 1860 × 790 × 1900 mm • Brochure gross weight: 2200 kg Maximum cutting thickness and maximum cutting length are separate limits; the permissible combination depends on the material and operation. STANDARD EQUIPMENT • Punch and die tooling • 500 × 500 mm work table with chamfering provision • 1000 mm electric back gauge / contact length stop • Foot pedal controls with stop buttons • Schneider electrical components • Hydraulic system with HUADE valves and a Japanese-brand oil pump • Bending / press attachment and reducing sleeve Bwedpfoz Hy I Njx Amrou PRICE AND DELIVERY €10,970 net, excluding VAT, EXW Sokołów Podlaski, Poland. 12 months warranty on parts. Delivery to any destination in Europe – shipping cost calculated upon request (not included in the machine price). The model-specific inspection report records a successful factory inspection on 20 August 2026. Photos show the supplied model and its equipment. Technical capacities are based on the supplied documentation; tooling and the material being processed determine the applicable operating limits.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: hydraulic, working width: 400 mm, stroke rate (max.): 8 1/min, throat depth: 300 mm, punching force: 66 t, punching diameter: 25 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, table length: 500 mm, table width: 500 mm, overall weight: 1,700 kg, total length: 1,640 mm, total width: 730 mm, total height: 1,770 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, notching unit, NEW MTP IW66 Hydraulic Ironworker – 660 kN – 12 months warranty on parts – delivery to any destination in Europe The MTP IW66 by Metal Technics Polska is a versatile 5-in-1 hydraulic ironworker for metal fabrication shops, steel construction and maintenance workshops. With 660 kN working pressure it punches, shears and notches plate, flat bar, square bar, round bar, angle and channel – and the work table also allows plate bending up to 500 mm. One compact machine replaces several single-purpose tools. TECHNICAL DATA • Working pressure: 660 kN • Max. cutting thickness (plate): 16 mm • Max. cutting length: 400 mm • Tensile strength of material: up to 450 N/mm² • Shear angle: 7° • Ram stroke: 80 mm • Stroke rate: 8 strokes/min • Throat depth: 300 mm • Max. punching capacity: Ø25 x 16 mm • Main motor: 4 kW, 400 V / 50 Hz / 3-phase • Control voltage: 24 V • Dimensions (L x W x H): 1640 x 730 x 1770 mm • Weight: 1700 kg Bjdpfez Hz A Iex Amrswu FEATURES • Separate stations: punching, angle shear, bar shear (round/square), plate/flat bar shear, notching • Safety guards with viewing windows on all stations • Emergency stop and foot pedal with stop button • CE electrical cabinet with Schneider main components • HUADE hydraulic valve STANDARD ACCESSORIES • Punch and bottom die • 500 x 500 mm work table with chamfering • 1000 mm electric back gauge • Japanese-brand oil pump • Press function • Reduction sleeve CONDITION Brand-new machine (2026), tested and inspected at the factory (inspection report available). Photos show the actual machine. WARRANTY & DELIVERY • 12 months warranty on parts • Delivery to any destination in Europe – shipping cost calculated upon request • Price: EUR 8,680 net (excl. VAT) We ship to any address in Europe – the machine is carefully packed and delivered straight to your workshop. Get in touch and we will prepare a tailored delivery quote for your location.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center height in crank: 517 mm, center width: 400 mm, turning length: 1,500 mm, feed length X-axis: 420 mm, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,240 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 2,600 kg, MTP CQ6280 Lathe 800 × 1500 – Ø105 mm Spindle Bore – 7.5 kW – 3-Axis DRO Metal Technics Polska is a manufacturer and importer of professional metalworking machinery. We supply proven technologies from Poland, Europe and Asia to companies throughout Europe and have focused on quality, precision and reliability for 15 years. The MTP CQ6280 is a heavy-duty universal lathe designed for machining shafts, tapers, spherical surfaces and internal and external threads using turning tools, drills and threading tools. With a swing over bed of 800 mm, a turning length of 1500 mm and a Ø105 mm spindle bore, it is ideally suited for professional workshops and industrial production. TECHNICAL DATA • Maximum turning length: 1500 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm (gap length 330 mm) • Bed width: 400 mm • Z-axis travel: 230 mm • X-axis travel: 420 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm (16 speeds) • Spindle bore: 105 mm • Spindle nose: D1-8 Bwedpfoyzzghjx Amrou • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev (25 steps) • Z-axis feed: 0.044–1.48 mm/rev (25 steps) • Tailstock quill: Ø90 mm, MT5, 235 mm travel • Tailstock adjustment: 11 mm • Metric threads: 0.45–120 mm (54) • Module threads: 0.25–60 mm (46) • Whitworth threads: 7/16–80 TPI (54) • Diametral Pitch threads: 0.88–160 DP (42) • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions (L × W × H): 3240 × 1140 × 1910 mm • Weight: 2600 kg STANDARD EQUIPMENT • 3-axis digital readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Driving plate • Fixed steady rest, max. Ø250 mm • Travelling steady rest • Chuck guard and splash guard • Coolant system • Reduction sleeves • Fixed centre • Tool set DELIVERY, WARRANTY & SERVICE Delivery can be organised to any destination in Europe. The machine is supplied with a 12-month warranty on parts, with technical service and support available throughout Europe.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 59 mm, roller (top) diameter: 59 mm, side roll diameter: 59 mm, overall weight: 420 kg, total length: 1,700 mm, total width: 400 mm, total height: 1,100 mm, input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1300 × 1.5 mm – Electric 3-Roll Sheet Metal Bending Machine MACHINE IN STOCK – READY FOR IMMEDIATE DISPATCH Price: €2,080 net EXW European delivery available – transport quotation on request. The MTP ESR 1300 × 1.5 mm is a compact, electrically driven 3-roll sheet metal bending machine designed for rolling cylindrical parts, tubes, sleeves, rings and light conical components from sheet metal. The machine combines a rigid welded frame with hardened, high-quality steel rolls and simple mechanical adjustment. It is suitable for workshops, metal fabrication companies, maintenance departments and small/medium production facilities. MAIN TECHNICAL DATA • Working length: 1300 mm • Maximum sheet thickness: 1.5 mm • Roll diameter: 59 mm • Motor power: 0.75 kW • Dimensions: 1700 × 400 × 1100 mm • Weight: approx. 420 kg • System: 3 rolls • Drive: electric • Condition: brand new MACHINE FEATURES The machine uses a three-roll bending system with eccentric pressure adjustment. The upper and lower rolls are manufactured from high-grade hardened steel, providing good wear resistance and stable forming accuracy. Bwedpfoz Hx Eajx Amrou The rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for basic cone rolling within its standard adjustment range. The photographs show a robust and straightforward mechanical construction with: • manual handwheel and lever adjustment, • electrically driven roll rotation, • front-mounted control panel, • emergency stop button, • foot pedal operation for convenient starting and reversing of the rolling process, • safety cord / perimeter emergency protection, • solid floor-standing frame, • accessible mechanical components for easy adjustment and maintenance. Foot control allows the operator to keep both hands free for positioning and guiding the sheet during forming, which is especially useful when working with larger panels. APPLICATIONS Suitable for producing: • cylindrical sheet-metal components, • pipes and sleeves, • rings, • curved panels, • light conical parts, • workshop and fabrication components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales support. We can assist with machine selection, rolling technology and correct working parameters for different materials. We provide warranty and post-warranty service and can organise professional transport throughout Poland and the whole of Europe. The machine is brand new, CE marked, covered by the manufacturer’s warranty and available immediately from stock. Please contact us for delivery costs, additional technical information, photos or a commercial quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning length: 3,000 mm, feed length X-axis: 420 mm, quill travel distance: 235 mm, total length: 4,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 4,300 kg, disc diameter: 450 mm, faceplate diameter: 450 mm, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH Transport can be arranged directly to the customer anywhere in Europe. Transport cost is quoted individually according to the delivery postcode and destination. MTP CQ6280 HEAVY-DUTY UNIVERSAL LATHE 800 × 3000 – Ø105 mm SPINDLE BORE – 7.5 kW – 3-AXIS DRO Metal Technics Polska – Professional Metalworking Machinery The MTP CQ6280 800 × 3000 is a heavy-duty universal lathe designed for demanding professional and industrial machining applications. Its rigid construction, large working capacity and Ø105 mm spindle bore make it suitable for machining large shafts, cylindrical components, tapers, stepped parts and internal or external threads. With an 800 mm swing over bed, 3000 mm turning length, 400 mm wide bed and a machine weight of approximately 4300 kg, the CQ6280 provides the stability required for heavy workshop and production use. The machine is equipped with a 7.5 kW main motor and 3-axis Digital Readout (DRO) for accurate and convenient machining. TECHNICAL DATA • Maximum turning length: 3000 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm • Gap length: 330 mm • Bed width: 400 mm • X-axis travel: 420 mm • Z-axis travel: 230 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm, 16 speeds • Spindle bore: Ø105 mm • Spindle nose / mounting: D1-8 Bedoyz Ubxopfx Amrowu • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev • Z-axis feed: 0.044–1.48 mm/rev • Tailstock quill diameter: Ø90 mm • Tailstock quill travel: 235 mm • Tailstock taper: MT5 • Tailstock cross adjustment: 11 mm • Metric threads: 0.45–120 mm • Module threads: 0.25–60 mm • Diametral Pitch threads: 0.88–160 DP • Whitworth threads: 7/16–80 TPI • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions: 4740 × 1140 × 1910 mm • Weight: approx. 4300 kg STANDARD EQUIPMENT • 3-axis Digital Readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Drive plate • Fixed steady rest up to Ø250 mm • Travelling steady rest • Coolant system • Chuck guard • Fixed splash guard • Reduction sleeves • Dead centre • Tool set APPLICATIONS Suitable for: • large shafts and cylindrical components, • tapers and stepped workpieces, • internal and external threading, • repair and maintenance work, • heavy workshop machining, • general industrial production. SALES, DELIVERY & SUPPORT We provide professional technical advice before purchase, as well as warranty and post-warranty support. Professional transport can be organised throughout Poland and the whole of Europe directly to the customer’s destination. Please provide your delivery postcode and city for an individual transport quotation.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 60 mm, roller (top) diameter: 60 mm, side roll diameter: 60 mm, overall weight: 310 kg, total length: 1,300 mm, total width: 700 mm, total height: 1,260 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1020 × 2.0 mm – Electric 3-Roll Sheet Metal Bending Machine PRICE: €1950 NET EXW European delivery available – transport quotation on request. The MTP ESR 1020 × 2.0 mm is a robust electrically driven 3-roll sheet metal bending machine designed for accurate rolling of cylindrical components, tubes, sleeves, rings and light conical parts. Its compact footprint, rigid welded frame and hardened steel rolls make it suitable for professional fabrication workshops, maintenance departments and production facilities requiring a reliable machine for regular sheet-metal forming work. MAIN TECHNICAL DATA • Working length: 1020 mm • Maximum sheet thickness: 2.0 mm • Roll diameter: 60 mm • Motor power: 0.75 kW • Power supply: 400 V • Dimensions: 1300 × 700 × 1260 mm • Weight: approx. 310 kg • Number of rolls: 3 • Drive: electric • Condition: brand new Bwsdpfx Amjz Hx T Rsrsu MACHINE FEATURES The ESR 1020 × 2.0 mm uses a three-roll system with eccentric pressure adjustment, allowing straightforward positioning of the rolls and controlled forming of the workpiece. The rolls are manufactured from high-grade hardened steel, providing good durability and resistance to wear. The lower and upper rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for cone rolling within its standard adjustment range. As shown in the photographs, the machine features: • heavy-duty welded steel frame, • electric motor with reduction gearbox, • manual handwheels and levers for precise mechanical adjustment, • easy roll-position adjustment, • swing-out / releasable upper-roll arrangement for easier removal of finished cylindrical workpieces, • foot pedal for convenient forward/reverse operation, • emergency stop button, • perimeter safety cord around the working area, • clearly accessible operating controls, • CE marking and safety warning labels. The foot-operated control allows the operator to keep both hands free for positioning and guiding the sheet during the rolling process, improving control when working with larger workpieces. APPLICATIONS Suitable for producing: • cylindrical sheet-metal parts, • tubes and sleeves, • rings, • curved panels, • light conical components, • general fabrication and workshop components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales assistance. We can help with machine selection, rolling technology and suitable operating parameters for different materials. Warranty and post-warranty service are available, and we can organise professional transport throughout Poland and the whole of Europe. Brand-new machine with manufacturer’s warranty. Available to order. Please contact us for current delivery time, transport costs, additional photographs, technical information or a personalised commercial quotation.

Condition: good (used), functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,150 mm, total width: 900 mm, total height: 1,910 mm, OPEN 16T ECCENTRIC PRESS – THE MACHINE HAS MINOR DAMAGE AS SHOWN IN THE PHOTOS: THE ELECTRICAL CONTROL CABINET AND THE OIL DRIP TRAY ARE DENTED. Professional 16-ton eccentric press designed for punching, stamping, bending and forming metal components. The open back frame construction provides easy access to the working area and comfortable machine operation. The rigid and durable construction ensures stable operation even during intensive industrial use. The machine is equipped with a dry pneumatic friction clutch and modern safety systems. Main machine features: • Open back frame design • Rigid and durable construction • Fixed working table • Transversely mounted crankshaft • Horizontally mounted crankshaft • Dry pneumatic friction clutch • Lifting balance device • Safety valves • Manual control • High production efficiency Bwsdpfszp I Tzex Amrju TECHNICAL SPECIFICATIONS: • Pressing force: 16 t • Stroke under load: 2 mm • Slide stroke: 0–70 mm • Number of strokes: 125 strokes/min • Maximum die height: 170 mm • Distance from slide block to frame: 170 mm • Working table dimensions: 320 × 480 mm • Table hole diameter: Ø100 mm • Opening dimensions: 160 × 240 × Ø210 mm • Slide dimensions: 180 × 200 mm • Shank hole size: Ø40 × 60 mm • Distance between columns: 220 mm • Table thickness: 60 mm • Maximum tilt angle: 25° • Motor power: 1.5 kW • Machine dimensions: 1150 × 900 × 1910 mm • Weight: 1400 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Delivery to customer possible • Shipping cost calculated individually • Used machine in good condition • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Additional delivery information: • Delivery can be arranged throughout Europe • Shipping cost calculated individually depending on customer location • Fast order processing • Personal collection possible • Machine professionally secured for transport

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, total height: 1,850 mm, total length: 1,960 mm, total width: 1,480 mm, feed length X-axis: 800 mm, feed length Y-axis: 415 mm, workpiece weight (max.): 500 kg, feed rate Z-axis: 360 m/min, grinding wheel diameter: 350 mm, distance table to spindle center: 520 mm, table length: 800 mm, table load: 500 kg, type of input current: three-phase, table width: 400 mm, grinding wheel width: 30 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,800 kg, grinding spindle motor power: 4 W, SURFACE GRINDER SP-4080AHR • Rapid vertical feed to the workpiece • Coolant tank with magnetic filter • Digital readouts on 2 axes • Free-standing hydraulic unit with heat exchanger • Longitudinal and cross guides hardened and ground • Table with longitudinal flat guide and cross triangular guide • Electromagnetic chuck • Balancing arbor • Grinding wheel flange • Accessibility for operators with disabilities • Grinding wheel with holder • Wheel dresser • Cooling system • Central lubrication system • Work area lighting • Set of basic adjustment tools • Table cover • Leveling bolts and washers • User manual in Polish • CE Declaration of Conformity Working table size mm 400x800 T-slots (number x width) pcs/mm 1/14 Max. longitudinal travel mm 800 Cross travel mm 415 Max. distance from spindle axis to table mm 520 Longitudinal feed of working table mm/min 3-20 Table feed Automatic mm/min 0-8 Bwedpfx Ajy Sgdgomrou Rapid mm/min 600 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Vertical feed of spindle head Automatic mm/min none Rapid mm/min 360 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Grinding wheel Rotational speed rev/min 2800 Size mm 350x30x127 Grinding accuracy mm 300/0.005 Surface finish Ra 0.32 Spindle motor power kW 4.0 Cross feed motor power kW 0.04 Max. working table load kg 500 Overall dimensions (LxWxH) mm 1960x1480x1850 Gross weight kg 1800

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 2,200 kg, power: 3.7 kW (5.03 HP), input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, broaching length: 200 mm, number of broaching positions: 4, broaching speed: 25 m/min, workpiece diameter (max.): 460 mm, total length: 1,717 mm, total width: 1,221 mm, total height: 1,885 mm, Special Offer – 5% Discount Available! Metal Slotting Machine B5020 – 200 mm Stroke The Metal Technics Polska B5020 Metal Slotting Machine is a professional industrial machine designed for machining keyways, splines, internal grooves and other precision slotting operations. Its rigid construction, large rotary table and automatic feeds ensure excellent machining accuracy, high productivity and reliable operation. The machine is ideal for tool rooms, maintenance departments and manufacturing facilities. With a maximum slotting force of 5 kN, a 200 mm ram stroke and a 360° rotary table, it is suitable for a wide range of precision machining applications. Main Features • 200 mm ram stroke • Heavy-duty industrial construction • Ø460 mm rotary table • Automatic longitudinal, cross and rotary feeds • Adjustable ram inclination • Maximum slotting force: 5 kN • High machining precision • CE certified Technical Specifications • Model: B5020 • Maximum ram stroke: 200 mm • Stroke speeds: 32 / 50 / 80 / 125 strokes/min • Ram inclination: 0°–8° • Vertical ram adjustment: 200 mm • Table diameter: 460 mm • Maximum table load: 400 kg • Longitudinal table travel: 420 mm • Cross table travel: 420 mm • Table rotation: 360° • Maximum tool size: 25 × 40 mm • Maximum slotting force: 5 kN • Main motor power: 3 kW • Feed motor power: 0.7 kW • Machine dimensions: 1717 × 1221 × 1885 mm • Machine weight: 2200 kg Applications • Keyway machining • Internal splines • Internal grooves • Slotting operations • Tool rooms • Maintenance workshops • Metalworking • Industrial manufacturing Transport and Delivery Bwjdjzf Huiopfx Amrou The machine is supplied brand new and includes a 12-month warranty, CE Declaration of Conformity, technical documentation, warranty and professional after-sales support. Spare parts are readily available. We provide professional transport throughout Europe using specialized machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.