Used Moulding for sale (1,538)

Condition: used, Year of construction: 2006, Overview This SIDEL SBO 2 XL Compact is a two-cavity PET stretch blow moulding machine built in 2006 for large-format containers of up to 10 litres. It pairs a Sidel preform tipper, hopper and feeder with a Sidel Compact linear oven with 5 heating modules and a blowing station for two moulds. Output depends on bottle size: approx. 2,400 bottles/hour at 500 ml, approx. 2,000 bottles/hour at 5 litres and approx. 1,000 bottles/hour at 10 litres. The machine is currently set up for preforms with a 48/41 neck finish and last produced 8-litre PET bottles. Its hour counter reads approx. 12,500 hours. It ran in a plastics converting plant until March 2026 and was then dismantled by skilled technicians and stored dry. Large-format blow moulders of this size are rarely offered on the second-hand market. Moulds are not included. Technical data - Manufacturer: SIDEL - Model: SBO 2 XL Compact - Year of manufacture: 2006 - Machine type: PET stretch blow moulding machine - Bottle size range: approx. 2.0 to 10.0 litres - Current bottle format: 8 litre PET - Current neck finish: 48/41 - Mould stations: 2, block moulds - Moulds: not included - Oven: Sidel Compact linear oven - Heating modules: 5 - Output at 500 ml: approx. 2,400 bottles/hour - Output at 5 litres: approx. 2,000 bottles/hour - Output at 10 litres: approx. 1,000 bottles/hour - Operating hours: approx. 12,500 h - Control: Siemens SIMATIC touchscreen HMI Equipment - Sidel preform tipper Dwsdpfozxtziox Al Aec - Sidel preform hopper and feeder - Sidel Compact linear oven with 5 heating modules - Sidel blowing station for 2 moulds - Sidel electrical cabinet - Sidel drive panels with Siemens touchscreen control - Safety enclosure with transparent guard panels - Electrical and mechanical drawings, service and maintenance manuals, spare parts books Condition Used - good working condition. The machine was serviced by Sidel and by in-house technicians under a regular preventive maintenance schedule, and ran in production until March 2026. It is now dismantled and stored dry and can be inspected in stored condition. Availability Immediately. Location: France. Ready for loading and shipment.

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Dedpfx Aer Hr D Nsl Aswc Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: used, Year of construction: 2000, Overview Dsdpfel Hxpnox Al Ajwc The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  - Capacity: 3.600 bph  - 3 cavities - Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  - Space requirement approx. 9x5 m²  - Weight: 4,5 t  - Operating hours: 23.824   - Bottles - Volume: 250 ml - 2500 ml   - Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed).

Condition: used, Year of construction: 2002, Overview  This model USP-2 blow molding machine was manufactured by UROLA in 2002 and is designed for the production of PET bottles with a throughput of 800 bottles per hour for 5-liter bottles and 2,200 bottles per hour for 1-liter bottles. The machine has already been dismantled and stored and can be viewed by appointment. It supports the production of bottles in sizes from 250 ml to 5 liters. Technical details   Output: 800 bottles/hour (5-liter bottles) 2,200 bottles/hour (1 liter bottles) Formats: 250 ml to 5 liters Weight: 3,500 kg Condition: Already dismantled and stored Inspection: Possible by appointment Dsdpfsu Huydox Al Aswc

Condition: used, Year of construction: 2003, Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  - Capacity: 4.000 bph  - 4 cavities - Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  - space requirement approx. 22 m² (incl. preform feeding system) - Bottles - 1,0 l PET - 0,5 l PET - 0,33 l PET Dwjdowizc Ejpfx Al Asc Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor.

Condition: excellent (used), Year of construction: 2015, Holzkraft T 45 W classic Year of manufacture: 2015 Table saw with a robust steel-cast iron construction Tilts up to -45° Dsdszzci Ujpfx Al Ajwc Usable spindle length: 108 mm Max. tool diameter: 190 mm Table dimensions: 1000 x 435 mm Dimensions of aluminum sliding table: 1000 x 270 mm Motor: 4 kW, 400 V 3500/6000/8000/10000 rpm Equipped with a crosscut fence and sliding table Support arm on a swivel arm Aluminum telescope fence with folding stops and eccentric clamping device Otherwise, standard version Includes a 3-roller feed device

Condition: excellent (used), Used industrial moulding machine for traditional bread processing: round moulding and long moulding in one machine. Belt-type rounder and long moulder (Globus U), with 2 integrated flour dusters. Mobile on castors (easy to move in the bakery). Suitable for wheat dough as well as mixed doughs with rye content. Performance data: capacity of up to approx. 1,200 pieces/hour; dough piece weight: approx. 300–2,400 g. Dimensions: external measurements approx. 180 × 73 × 169 cm (W×D×H). Condition / Scope of delivery: Used machine, ready for operation (details/video/test upon arrangement). Additional accessories available. Inspection/trial run possible by appointment. Delivery available. Dwjdpfx Alex Tflls Asc

Condition: used, Year of construction: 1973, Used machine Dwedpfezy Dzvsx Al Aec Year of manufacture: 1973 Equipment and technical data:

Condition: used, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm (140) 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 4 kW / left + right 7.5 kW / top 5.5 kW / bottom finishing 5.5 kW Dwedpfx Aleyi Dw Do Aec Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min Feed roller before jointer Control - push button operation automatic lubricant pump mechanical digital displays Machine in CE design Year of manufacture 2001 Without machining tools Machine is WORKSHOP OVERHAULED in GOOD CONDITION Machine is connected and ready for demonstration in exhibition center Ex stock Lieboch

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale is a used SAMCO T 40 I table milling machine / swivel spindle milling machine, manufactured in 1996. This compact and robust milling machine features a spindle that can be swiveled up to 45°, multiple speed settings, and clockwise/counter-clockwise rotation. The spindle adjustment is conveniently done using the side handwheel. Technical specifications: Manufacturer: SAMCO / SCM Type: T 40 I Year of manufacture: 1996 Machine number: KK/032907 Voltage: 380 V / 50 Hz Motor power: 3 kW / 4 HP Speeds: 3,500 / 6,000 / 8,000 rpm Spindle length: approx. 125 mm Max. tool diameter: approx. 180 mm Swiveling milling spindle: up to 45° Clockwise/counter-clockwise rotation Motor brake Manual spindle height adjustment Milling fence with dust extraction option Weight: approx. 175 kg Used, well-maintained condition considering its age. The machine is compactly built and is well-suited for carpentry shops, joineries, and smaller woodworking businesses. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be immediately available! The machine will be inspected before sale. In the case of a sale to commercial customers, the warranty will be excluded due to the year of manufacture. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee. Dwodpfxjzxx Egj Al Aec

Condition: excellent (used), Year of construction: 1999, H+K Four-Side Planer & Thicknessing Machine Quadroplan 180 Planing width: 20 - 180 mm Planing height: 5 - 120 mm Infeed table length: 2,100 mm Separate motor for each spindle Upper spindle motor: 5.0 kW Lower spindle motor: 4.0 kW Left spindle motor: 4.0 kW, automatic flow head Right spindle motor: 4.0 kW Max. spindle speed: 6,000 rpm Spindle diameter: 30 mm Max. feed speed: 8 m/min Cardan drive feed Feed motor power: 0.75 kW Total connected load: approx. 18.0 kW, 400 V, 50 Hz Extraction ports: 2 x 120 mm, 1 x 140 mm, 1 x 160 mm Dimensions (L x W x H): 3,370 x 1,330 x 1,500 mm Weight: approx. 1,280 kg Planing height adjustment, motorized with digital display Planing width adjustment, motorized with digital display Pneumatic spindle locking Unpowered outfeed roller Automatic centralized lubrication Automatic star-delta switching Dwsdpfxjydmaws Al Aec INCLUDES 4 reversible knife cutterheads INCLUDES operating manual & circuit diagram CE certified All bearings NEW All drive belts NEW Note on used machines: • Errors in technical details and prior sale excepted. • Prices listed are ex location – free loaded! • Machines have been cleaned and function tested. • All machines are sold as inspected, with no warranty or liability. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Dwedsiknp Ropfx Al Asc Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: excellent (used), Year of construction: 2000, Robust oscillating milling machine T 26, swiveling from -45 to +45 degrees. Reversible drive motor 5 / 6kW with automatic motor brake. R/L rotation. Swiveling angle from -45 to +45 degrees, electrically adjustable. Height adjustment max. 150mm, electrically adjustable. When the height is adjusted, the correction factor for the swiveling angle is displayed in the upper display, which is then set on the stop, allowing settings to be realized according to drawings. Four speeds: 3000, 4500, 6000 and 9,000 rpm. Spindle diameter 30mm, quick-change spindle with torque wrench. Comfort stop T226 with digital displays for total adjustment and infeed stop individually, as well as input of the cutter diameter; the cutting depth is automatically calculated. Stop with lifting device, can be swivelled away (for curved milling). Table extension on the right and left with extendable workpiece support. Support can be extended by 700mm. Table length approx. 2400mm. Dedpfx Aozbm Tfel Ajwc Foldable stop for mortise milling. Workpiece clamping device Aigner Centrex. Original Martin cast iron table left 500mm, right 500mm with two insert guide rails. 3-roller feed HolzHer ET117, with 8 speeds, R/L rotation, new rollers. Feed socket, switchable from the control panel. Comfort stand with electrically height-adjustable feed support, which can be swivelled away for machine setup and then easily locked into place. Dust extraction nozzle 2 x 120mm. Compressed air connection 6 bar. Emergency stop switch. Some parts of the machine have been newly painted (special color RAL1015). V-belts renewed. Operating manual. CE marking. Dimensions approx. 3000 x 1500 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 505004, total width: 970 mm, total length: 680 mm, total height: 700 mm, empty load weight: 250 kg, input voltage: 380 V, Manufactured: 08/2005 Power: 0.55 kW Power supply: 220/380 V three-phase 50 Hz Dough weight: 50 to 1200 g Production: 1200 pieces/hour External casing made of stainless steel Mechanical side adjustments Forming belts Output receiving table Emergency stop on the front panel Dimensions: 970x680x700 mm Weight: 250 kg Djdpfoz Eht Dex Al Aowc Used SINMAG SM-380S dough sheeter The used SINMAG SM-380S dough sheeter is designed for professional dough shaping in bakeries. This unit, manufactured in August 2005, features a 3-cylinder system, mechanical adjustments, and felt conveyor belts. Its nameplate indicates a power of 0.55 kW and a 220/380 V three-phase 50 Hz power supply. The specific data for this machine is distinguished below from the characteristics derived from the European documentation for the range. Why this SINMAG SM-380S stands out The operation is based on the progressive rolling of the dough and then its elongation. The mechanical controls allow adjusting the passage through the cylinders according to the desired result. The documentation for this generation specifies that the right handle adjusts the spacing of the front cylinders, while the left handle adjusts the inclined cylinders to adapt the final length. This design allows bakers to work with different dough weights without complex electronic programming. The European documentation associated with this version states a range of 50 to 1,200 g and a shaping width of 750 mm. Key advantages 3 cylinders for rolling and shaping Mechanical adjustments for rolling and length Felt conveyor belts Stainless steel construction, as documented for the SM-380S version Extendable receiving table Emergency stop present on this unit Wide range of documented dough weights Detailed technical specifications

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Planer and groover / four-sided planer Manufacturer: SCM Type: Superset XL Year of manufacture: 2006 Planer with 5 spindles (bottom, right, left, top, universal spindle), originating from a parquet manufacturing facility. Working width: 230 mm Working height: 120 mm Dwjdpfx Aoz D Eyxsl Aoc Feed speed steplessly adjustable, approx. 5 - 25 m/min. Spindle arrangement: Bottom Right Left Top Universal spindle Weight approx. 3000 kg

Condition: like new (used), functionality: fully functional, Hydraulic feed to the Weinig Hydromat. Feed speed 8-60m/min Dwodpfx Asv Er Ufol Aec

Condition: good (used), functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 5,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 9, power: 95 kW (129.16 HP), input frequency: 50 Hz, Equipment: cabin, Four-sided planer Weinig Unimat 23, lamella machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) 6-Bottom (5.5 kW) Dwjdex Hkp Njpfx Al Aoc 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table

Condition: good (used), Weinig Hydromat 23 Dsdezwwhkjpfx Al Aswc

Condition: excellent (used), Hydro planing head, Leitz Cutting edges: Z 6 Circle diameter: 145 mm Dwjdozwwmtjpfx Al Asc Bore: 50 mm Length: 60 mm Clamping: Hydro Price per piece.

Condition: excellent (used), Weinig precision setting gauge Mandrel – 50 mm Dodpfx Aezw Ngfol Ajwc

Condition: new, functionality: fully functional, Year of construction: 2026, Tilting Spindle Moulder CORMAK WS1000TA is a technologically advanced machine designed for professional woodworking in carpentry, furniture and production workshops. With a tilting spindle, a large cast iron table and a precise tool guidance system, the machine enables efficient and accurate machining of straight and profiled wooden components. Main advantages of the machine Tilting spindle from +5° to -45° – allows for bevels, rebates and special shapes to be machined. Large, heavy-duty cast iron table – ground and polished for smooth glide and work stability. Four-speed spindle control: 1,800 / 3,000 / 6,000 / 9,000 rpm – flexibility for various materials and tools. Rigid steel frame structure – ensures vibration damping and precision even under heavy load. Spindle stroke 100 mm and maximum tool diameter 180 mm – suitable for a wide range of cutters. Precise spindle and stop adjustment – enables accurate machining and dimensional repeatability. Easy tool change – optimised spindle access reduces setup time. Dwedpfxoycu Awj Al Aoc Construction and technology The CORMAK WS1000TA spindle moulder is designed for durability and functionality in serial production. The machine body is made of thick-walled steel sheets, ensuring rigidity and resistance to deformation. The main table 1,000 × 360 mm and optional sliding table 1,000 × 240 mm allow efficient handling of long workpieces. The motor power 2.8kW (S1) / 3.9kW provides the energy needed for solid wood and wood-based materials machining. Precision and performance The machine allows for precise milling operations, including angular machining. The tilting spindle enables non-standard operations, while the accurate column spindle guide eliminates play and improves surface finish. The V-belt transmission ensures quiet and stable operation across the full speed range. Applications The CORMAK WS1000TA spindle moulder is ideal for: professional carpentry workshops, production of door and furniture components, machining of tenons, grooves, rebates and decorative profiles, angled and curved milling with a suitable attachment. Standard equipment 30 mm spindle Side and top pressure hold-downs Precision milling fence Curved milling attachment Angle stop User manual CE Declaration of Conformity Optional accessories* Sliding table (1,000 × 240 mm) – shown in the photos Mechanical feed systems Special protective covers and guiding systems *The price quoted applies to the machine only, excluding optional/additional equipment, installation, transport and training — please contact our consultant for more details. Technical data Spindle diameter [mm] 30 Spindle speed [rpm] 1,800 / 3,000 / 6,000 / 9,000 Spindle stroke [mm] 100 Table dimensions (L × W) [mm] 1,000 × 360 Sliding table dimensions (optional) [mm] 1,000 × 240 Table height [mm] 900 Max. cutter diameter [mm] 180 Spindle tilt [°] +5 to -45 Motor power [kW] 3.9 Motor power S1 100% [kW] 2.8 Weight [kg] 270 Warranty [months] 12 User manual included

Condition: new, Catalog number: S0367 TECHNICAL DATA work table dimensions 800x800mm motor power S1/S6 3.0 / 4.4kW Dwsdpfx Aszullfel Aoc hole diameter in the table 190mm spindle diameter 30mm spindle tilt 0° -45° spindle speed 1400 / 3500 / 6000 / 8000 rpm rotation direction right, left spindle vertical travel 175mm spindle working height 125mm max. tool diameter for shaping / for tenoning 180/250mm dust extraction nozzle diameter 120mm dimensions L/W/H 2800x1800x1090mm weight 410kg – machine is new – tilting spindle – with side trolley Net price: 17200 PLN Net price: 4000 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: excellent (used), Catalog number: 8073 TECHNICAL DATA - Spindle diameter: 30mm - Spindle working height: 100mm Dsdpjzuk Daofx Al Aswc - Adjustable up/down + angle - Original guide - Crosscut carriage - 4 types of rotational speeds: 3000, 6000, 8000, 10000 rpm - Table dimensions with carriage: 660x950mm - Cast iron table - With electric brake - Motor: 4kW - Diameter of dust extraction outlet: 120mm - Dimensions (L/W/H): 980x810x1350mm - Weight: 230kg ADVANTAGES - Made in Germany - Crosscut carriage - Tilting spindle - Brake - Unpainted - Used milling machine, very good condition Net price: 8900 PLN Net price: 2070 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), working width: 240 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 240 mm, working height: 160 mm, total width: 240 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, Weinig Unimat 1000 with grooved table Working width: 240 mm, working height: 160 mm, 5 spindles Spindle diameter: 50 mm Spindle arrangement: Dwodpfx Aozbz Ukjl Asc 1-Bottom (7.5 kW) 7000 RPM 2-Right (7.5 kW) 7000 RPM 3-Left (7.5 kW) 7000 RPM 4-Top (7.5 kW) 7000 RPM 5-Bottom (5.5 kW) 7000 RPM Feed rate: 4 kW / 6-36 m/min, one driven roller in the table at the outlet.

Condition: used, Year of construction: 1999, Second-hand machine Year of manufacture: 1999 Features and technical specifications: - with swivelling spindle: 0° – 45° - with aluminium roller table - Table dimensions: 1100 x 620 mm - Working height: 880 mm - Roller table dimensions: 900 x 200 mm - Roller table travel: 900 mm - Milling spindle diameter: 30 mm - Milling spindle stroke: 150 mm Dwjdpfx Aezk N Tfjl Aec - Speeds: 3100/4600/6200/8000 rpm - Motor: 4 kW - with 4-roller feed unit - Dimensions: 1200 x 1000 x 1400 mm - Weight: approx. 490 kg Availability: at short notice Storage location: 63934 Röllbach