Used Mori Seiki Mv 40 for sale (194)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 836, • Control system: FANUC MSC-500 • Axis travel: • X-axis: 560 mm • Y-axis: 410 mm • Z-axis: 460 mm • Table dimensions: 900 × 450 mm • Maximum table load: 700 kg • Spindle taper: CAT 40 • Maximum spindle speed: 8,000 rpm • Spindle motor power: 7.5 kW • Number of tool positions in the magazine: 20 Gedpev U Endofx Agbstt • Rapid traverse: • X and Y axes: 20 m/min • Z-axis: 15 m/min • Total machine power: 30 kW • Machine weight: approximately 5,000 kg • Machine dimensions (l × w × h): 2.48 × 2.25 × 2.8 m

Condition: used, Year of construction: 2013, x-travel 600 mm y-travel 530 mm z-travel 510 mm Control M 730 BM MAPPS IV max. spindle speed 10.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 transmission ratio 1 spindle diameter in front bearing 80 mm table surface area 900 x 600 mm max. table load 800 kg T-slots 6x 18 x 100 mm distance spindle /table 150 - 660 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 150 mm max. tool length 300 mm max. tool weight 8,0 kg change-time tool to tool ca. 1,3 sec change-time chip to chip ca. 3,45 sec Gtjdpfx Agex R Enbebet rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 30.000 mm/min Tipp feed 0 - 5.000 : 20 mm/min total power requirement 30 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - Machining Center Vertical MORI SEIKI - NVX 5060 II / 40

Condition: used, Year of construction: 2013, Mori Seiki NVX5100-II/40 Vertical Machining Centre with MAPPS IV/M730BM Control, Travel X/Y/Z = 1050/530/510mm, Table Size 1350 x 600mm x 1200kgs, Spindle Taper BT40, 30 Position ATC, Max Spindle Speed 13,000rpm, High-Pressure Through Spindle Coolant, Swarf Conveyor, Machine Weight 7,000kgs, Floor Space (L x W x H) 3084 x 2851 x 2597mm. S/No. NV502130614 (2013) Gtedpsx Syfkjfx Agbst Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2003, CNC machining center MORI SEIKI NH 5000/40 2003 Technical data: x-travel 630 mm y-travel 600 mm z-travel 670 mm Tool holder BT 40 Spindle speeds - continuously variable 14000 rpm Pallet change with rotary indexing table 360x1 degree 2 Max. workpiece weight 500 kg Tool change device 60-way Table size 500 x 500 mm Gjdpfovuql Ujx Agbjtt Total power requirement 56 kW

Condition: like new (used), Year of construction: 1985, Parts shown by hand not come. Gtsdpfx Agsgw Shrjbjt 4 axis not come with machine.

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, nominal power (apparent): 22 kVA, controller manufacturer: MORI SEIKI, controller model: MSX-711 IV, table load: 500 kg, number of slots in tool magazine: 60, tool length: 500 mm, tool diameter: 140 mm, tool weight: 12 g, MORI SEIKI NH-5000 DCG/40 Horizontal Machining Center The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center, designed to ensure exceptional precision, reliability, and continuous productivity, even for the most complex machining operations. Main features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Maximum speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travels): X axis: 730 mm Y axis: 730 mm Z axis: 850 mm Distance spindle center – pallet surface: 100 – 830 mm Distance spindle nose – pallet center: 100 – 950 mm Max. workpiece dimensions: Ø800 x 1,000 mm Rotary table: Dimensions: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Pallet load capacity: 500 kg Continuous table rotation: 360,000 positions Feed rates: Rapid traverse (X/Y/Z): 50,000 mm/min Working feed rates (X/Y/Z): 1 – 50,000 mm/min Gjdpewxygzefx Agbett Tool changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Max. tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Max. tool length: 500 mm Max. tool weight: 12 kg Equipment and accessories: Chip conveyor Coolant collection tank with wash pumps + external tank with paper filter High-pressure coolant pump through the spindle line Spindle head air conditioner and transformer Retractable tool presetting sensor Full technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and intensive production, the NH-5000 DCG/40 combines structural rigidity with advanced CNC technology, ensuring high-speed, high-precision machining of complex parts.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: NH501CA0185, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, TECHNICAL DETAILS X-travel: 630 mm Y-travel: 600 mm Z-travel: 670 mm Tool holder: BT 40 Spindle speed: 14,000 rpm Tool changer: 60 positions Gtjdpfxowtq Tbj Agbet Pallet changer with rotary table: 360x1° Max. workpiece weight: 500 kg Table size: 500 x 500 mm MACHINE DETAILS Total power requirement: 56 kW Rated power: 66 kVA Machine weight: 9,700 kg

Condition: ready for operation (used), Year of construction: 2000, Immediately available from site: CNC Vertical Machining Center Mori Seiki Gedox Tq Hbjpfx Agbott Model MV 653/50 Year of manufacture: 2000 CNC control: Fanuc MSG 501 Table: 1700 x 660 mm Table load capacity: 2 t Travel (X/Y/Z): 1530 / 660/ 650 mm Distance spindle – table: 200 – 850 mm Distance spindle – column: 690 mm Taper: SK 50 Spindle speeds up to 6,000 rpm Main spindle drive: 26/22 kW Tool changer: 40 positions Through-spindle coolant (IKZ) Feeds: 1 – 10,000 mm/min Rapid traverse: 24 m/min Creep feed: 0 – 1,260 mm/min Total connected load: 52.5 kVA Chip conveyor Weight: 16 t Price: EUR 6,000.00 plus VAT, ex site

Condition: used, Year of construction: 1986, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm total power requirement: 20 kW weight of the machine ca.: 8 t Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. Gsdpfewvblaox Agbott *

Condition: ready for operation (used), Vertical machining center, Mori Seiki MV-Junior Godjx I D Syjpfx Agbstt

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 30,000 W, number of axes: 4, General Data Gtjdpsx Imt Tsfx Agbot Machine weight 13000 kg Main Drive Number of axis 4 Spindle Speed 12000 RPM Spindle motor power 30 kW Tool taper BT 40 Movement X-Axis Movement 730 mm Z-Axis Movement 880 mm Y-Axis Movement 730 mm This 4-axis MORI SEIKI NH-5000 40 was manufactured in 2003, featuring a robust horizontal machining centre with a spindle speed up to 20,000 rpm and a power range of 22-30 kW. It includes a versatile tool magazine with a capacity up to 180 tools and a dual-pallet automatic changer to enhance productivity. Pallet size is 500 × 500 mm, supporting a maximum workpiece height of 1,000 mm. Consider the opportunity to buy this MORI SEIKI NH-5000 40 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2003, CNC controller: MSX-501 Axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 B-axis degrees: 360º (0.001º indexing) Feed rates m/min: 50 Gtjdpfxsxq Hcke Agbet Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1,000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 8,000 Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-40 Tool magazine slots: 60 Equipment Chip conveyor Signal lamp High-pressure pump Internal coolant supply

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: FANUC, controller model: FS-31IA (MAPPS III), workpiece length (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 500 kg, total height: 3,138 mm, total length: 2,725 mm, total width: 4,610 mm, overall weight: 12,900 kg, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 120, tool length: 500 mm, CNC controller: FS-31IA (MAPPS III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 B-axis degrees: 360º (1º) Distance spindle nose - table surface mm: 100 – 830 Gtsdovw Sc Tepfx Agbjt Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: No.40 Spindle torque Nm: 220 Tool system Tool holder: BT-40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Equipment Chip conveyor Workarea light CE conformity Coolant gun TOOL LIFE MANAGEMENT Cooling Tank capacity: 680 Machine running times Rated power kVA: 49 Basic machine dimensions / weight Length mm: 2.725 Width mm: 4.610 Height mm: 3.138 Weight kg: 12.900

Condition: excellent (used), Year of construction: 2005, x-travel 630 mm y-travel 600 mm z-travel 670 mm Control MSX 501 spindle turning speed - stepless 14000 U/min tool taper BT 40 pallet chang. with pallet turn. 360x1 degree 2 max. workpiece weight 500 kg tool change unit 60 fach table-size 500 x 500 mm total power requirement 56 kW weight of the machine ca. 11,8 t dimensions of the machine ca. 5,8 x 3,6 x 3,0 m Gsdpfx Agsunt Hdobstt

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 6675 1727 J, travel distance X-axis: 800 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, TECHNICAL DETAILS Travel paths x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm General information Machine weight: approx. 8 t Gsdpfxewm I Nys Agbett

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 560 mm z-travel 660 mm Control M 730 BM MAPPS IV distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 70 - 730 mm max. spindle speed 12.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle diameter in front bearing 80 mm numbers of pallets 2 pos. work height max. 1.050 mm size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm Max. workpiece - hight 900 mm B-Axis 0,001 ° Indexing-time 90° 1,3 sec change time of pallets 8,0 sec number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 70 mm max. tool-dia with free toolbox 170 mm max. tool length 450 mm max. tool weight 8 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 - max. 9,9 sec feed speeds max. 60.000 mm/min rapid traverse ( X / Y / Z ) 60 m/min total power requirement 35 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 5,5 x 3,5 x 2,6 m CNC - MachiningCenter Horizontal Godpfxex Hpyto Agbstt MORI SEIKI - NHX 4000 - pallet-changer - WITHOUT clamping towers

Condition: used, Year of construction: 2011, Mori Seiki NMV5000 DCG 5-Axis Machining Centre with F31iA5 Control, Spindle Taper BT40, Max Spindle Speed 12,000rpm (22/18.5kW), 61 Position ATC, Hydrajet WP10-1000 High Pressure Through Spindle Coolant. S/No. NM501JK0592 (2011) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Godpfx Agex Syf Rsbstt

Condition: ready for operation (used), Year of construction: 2003, Movement X-Axis Movement 600 mm Z-Axis Movement 400 mm Y-Axis Movement 400 mm Main Drive Spindle Speed 12000 RPM Number of axis 3 Tool taper BT 40 Table Table load 350 kg This 3-axis MORI SEIKI NV4000 was manufactured in 2003. It features a CNC control system, typically FANUC/MAPPS, and a vertical machining center design. Key specifications include a 600 mm x 400 mm x 400 mm axis travel, a table size of 700 mm x 450 mm, and a maximum spindle speed of 12,000 rpm. The tool magazine holds up to 40 tools. Consider the opportunity to buy this MORI SEIKI NV4000 vertical machining center. Contact us for more information. Application Types Milling Gtjdpsx Imudefx Agbjt

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600 Gtsdpfx Ajxfka Njgbet

Condition: used, Year of construction: 2003, turning length: 630 mm, turning diameter: 850 mm, spindle bore: 130 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 830 mm, Mori Seiki SL-403B/800 CNC Lathe (2003) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 2003 Control System: Mori Seiki MSX-501II Maximum Turning Diameter: approx. 630 mm Gjdpfsx Hp Eijx Agbott Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 850 mm X-Axis Travel: approx. 345 mm Z-Axis Travel: approx. 830 mm Spindle Nose: A2-11 Spindle Bore: approx. 130 mm Maximum Bar Capacity: approx. 102 mm Spindle Speed: up to 3,000 rpm Spindle Motor Power: approx. 30 / 37 kW Tool Turret: 12 Stations Tool Size: 25 × 25 mm Machine Weight: approx. 9500 kg Machine Dimensions (L × W × H): approx. 4,200 × 2,000 × 2,100 mm

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, The machine spindle was recently replaced. The corresponding report can be provided upon request. TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 40 m/min Table width: 500 mm Table height: 870 mm Table length: 500 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Rotational speed (max.): 1,200 rpm Spindle speed (max.): 12,000 rpm Spindle interface: HSK-A63 Workpiece height (max.): 450 mm Workpiece weight (max.): 300 kg Tool length: 300 mm Tool diameter: 125 mm Tool weight: 8,000 g Number of tool magazine slots: 180 MACHINE DETAILS Control unit: Siemens 840 D Total weight: 14,800 kg Incoming voltage: 400 V EQUIPMENT Mori Seiki tool application manual KNOLL FKA/500 band filter system + 3 filter rolls Filtermist FX5000 emulsion extraction unit Renishaw OMP60 3D probe Chip conveyor Spindle chiller Gsdpfjx Exvzsx Agbjtt Documentation + circuit diagrams

Condition: used, Year of construction: 2015, x-travel 560 mm y-travel 560 mm z-travel 660 mm Control M 730 BM MAPPS IV distance spindle center to table 80 - 640 mm Godpfx Aex Hpymsgbstt distance Spindlenose and center of table 70 - 730 mm max. spindle speed 12.000 min/-1 power capacity - main spindel 15 / 11 kW tool taper SK 40 spindle diameter in front bearing 80 mm numbers of pallets 2 pos. work height max. 1.050 mm size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm Max. workpiece - hight 900 mm B-Axis 0,001 ° Indexing-time 90° 1,3 sec change time of pallets 8,0 sec number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 70 mm max. tool-dia with free toolbox 170 mm max. tool length 450 mm max. tool weight 8 kg change-time tool to tool 0,9 sec change-time chip to chip 2,8 - max. 9,9 sec feed speeds max. 60.000 mm/min rapid traverse ( X / Y / Z ) 60 m/min total power requirement 35 kVA weight of the machine ca. 7,9 t dimensions of the machine ca. 5,5 x 3,5 x 2,6 m CNC - MachiningCenter Horizontal MORI SEIKI - NHX 4000 - pallet-changer - WITHOUT clamping towers

Condition: used, Year of construction: 2003, turning length: 630 mm, turning diameter: 850 mm, spindle bore: 130 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 830 mm, Mori Seiki SL-403B/800 CNC Lathe (2003) Machine Type: CNC Turning Center (2-Axis) Godpox Hp A Uofx Agbjtt Year of Manufacture: 2003 Control System: Mori Seiki MSX-501II Maximum Turning Diameter: approx. 630 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 850 mm X-Axis Travel: approx. 345 mm Z-Axis Travel: approx. 830 mm Spindle Nose: A2-11 Spindle Bore: approx. 130 mm Maximum Bar Capacity: approx. 102 mm Spindle Speed: up to 3,000 rpm Spindle Motor Power: approx. 30 / 37 kW Tool Turret: 12 Stations Tool Size: 25 × 25 mm Machine Weight: approx. 9500 kg Machine Dimensions (L × W × H): approx. 4,200 × 2,000 × 2,100 mm

Condition: used, Year of construction: 1998, turning length: 800 mm, turning diameter: 600 mm, spindle bore: 127 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, Mori Seiki SL-400B CNC Lathe (1998) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 1998 Control System: Mori Seiki MSC-501 Machining Capacity Maximum Turning Diameter: approx. 600 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 940 mm X-Axis Travel: approx. 343 mm Z-Axis Travel: approx. 993 mm Spindle Nose: A2-11 Spindle Bore: approx. 127 mm (5") Gtedpsx Hpw Sefx Agbet Spindle Speed: up to 2,400 rpm Spindle Motor Power: approx. 30 kW Tool Turret: 12 Stations Machine Weight: approx. 9,500 Machine Dimensions (L × W × H): approx. 4,300 × 2,000 × 2,100 mm

Condition: used, Year of construction: 1998, turning length: 800 mm, turning diameter: 600 mm, spindle bore: 127 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, Mori Seiki SL-400B CNC Lathe (1998) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 1998 Control System: Mori Seiki MSC-501 Machining Capacity Maximum Turning Diameter: approx. 600 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 940 mm X-Axis Travel: approx. 343 mm Z-Axis Travel: approx. 993 mm Spindle Nose: A2-11 Spindle Bore: approx. 127 mm (5") Spindle Speed: up to 2,400 rpm Gtedpjx Hpvuofx Agbot Spindle Motor Power: approx. 30 kW Tool Turret: 12 Stations Machine Weight: approx. 9,500 Machine Dimensions (L × W × H): approx. 4,300 × 2,000 × 2,100 mm