Used Mori Seiki Sl 1 for sale (205)

Condition: good (used), functionality: fully functional, machine/vehicle number: 324, turning length: 525 mm, turning diameter: 160 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 222 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, quill travel distance: 80 mm, quill diameter: 75 mm, overall weight: 5,000 kg, swing diameter over bed slide: 450 mm, swing diameter over top slide: 300 mm, controller manufacturer: MORI SEIKI, controller model: MORIC-T5F, Equipment: chip conveyor, documentation/manual, MORI SEIKI SL-15 M CNC Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Connection: 20 kVA - Swing diameter over bed: 450 mm - Swing diameter over turret slide: 300 mm - Distance between centers: 595 mm - Standard diameter: 160 mm - Front bearing inner diameter: 90 mm - Number of tools: 12, max. 6 stations for driven tools - Tool shank cross-section: 20 mm Kwodpfxeyvq Nuo Ahvew - Max. boring bar shank diameter: 32 mm - Driven tool spindle speed: 100 – 2000 rpm - Feed rate on X-axis: 0.00001 to 250 mm/min; Z-axis: 0.00001 to 350 mm/min - Rapid traverse speed X and Z axis: 1260 mm - Tailstock travel: 450 mm The machine is equipped with a tailstock, a 12-station tool turret (including the tool holders shown in the photos), and a chip conveyor. Note: This item must be collected between 12.05. and 22.05.2026 on a specific date to be agreed upon. FCA D-74821 Mosbach – loaded onto truck

Condition: used, MORI SEIKI SL-45MC-1500, 3-AXIS CNC LATHE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-45MC-1500 CONTROL FANUC 15T WITH FAPT, LED SCREEN CHUCK DIA 400mm SWING 670mm BETWEEN CENTRES 1700 mm SPINDLE BORE 120.0 mm SPINDLE SPEED 2,500 RPM, 4 SPEED GEARBOX TURRET 12 STATIONS, DRIVEN TURRET Ksdpfx Ahjymmqbovjww RAPIDS X: 12,000 mm/min Z: 15,000 mm/min TAILSTOCK INCLUDED, PROGRAMMABLE PLUS NEW “SCHUNK” SMW QUICK CHANGE CHUCK (WORTH 20,000 GBP) C-AXIS AND DRIVEN TOOLS HYDRAULIC STEADY FULL SET OF MANUALS MIST COLLECTOR VERY GOOD RANGE OF TOOLING NEW SWARF CONVEYOR IN EXCELLENT WORKING ORDER

Condition: good (used), turning length: 500 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-15 CNC Turning Center Machine Type: CNC Turning Center (2-Axis) Serial Number: 1899 Control System: Mori Seiki MSC-516 Maximum Turning Diameter: approx. 300 mm Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 62 mm Maximum Spindle Speed: approx. 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 12-Station Tool Size: 25 × 25 mm Equipment & Features Hydraulic Tailstock Kedpfx Ahsx Hp Ikovjww Tool Presetter 6.5" 3-Jaw Power Chuck Coolant System Machine Weight: approx. 4,000 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm

Condition: good (used), Year of construction: 2000, turning length: 300 mm, turning diameter over cross slide: 520 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 219 mm, travel distance Z-axis: 310 mm, Mori Seiki SL-150 SMC Twin Spindle CNC Turning Center (2000) Machine Type: CNC Turning Center Year of Manufacture: 2000 Serial Number: 1352 Control System: Mori Seiki SMC-501 Twin Spindle (Main & Sub Spindle) Live Tooling Turret C-Axis: 0.001° indexing Maximum Turning Diameter: approx. 320 mm Maximum Turning Length: approx. 300 mm Swing Over Bed: approx. 520 mm Kedpfox Hp Hgex Ahveww X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 310 mm Main Spindle Maximum Speed: 5,000 rpm Chuck: 6.5" 3-Jaw Power Chuck Sub Spindle Maximum Speed: 5,000 rpm Chuck: 5.5" 3-Jaw Power Chuck Live Tooling Live Tool Speed: 3,000 rpm Tool Turret: 12-Station Live Turret Standard Equipment Tool Presetter Chip Conveyor Coolant System Machine Data Machine Weight: approx. 5,000 kg Machine Dimensions (L × W × H): approx. 2,800 × 1,700 × 1,800 mm

Condition: good (used), Year of construction: 2002, Machine is in good working condition. Kwjdpfxexbqnxe Ahvjw Parts shown by hand not come.

Condition: good (used), Year of construction: 2003, Parts shown by hand not come. Kedpfx Aou N H Eqohveww

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: SL154SY, turning length: 750 mm, turning diameter over cross slide: 510 mm, turning diameter: 680 mm, spindle motor power: 7,500 W, spindle speed (min.): 50 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 56 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 550 mm, mount diameter: 20 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 6,000 m/min, rapid traverse Z-axis: 24,000 m/min, rotational speed (max.): 3,000 rpm, rotational speed (min.): 20 rpm, type of input current: three-phase, feed length X-axis: 215 mm, feed length Y-axis: 70 mm, feed length Z-axis: 550 mm, torque: 70 Nm, bar passage: 56 mm, total height: 2,015 mm, total length: 3,336 mm, total width: 1,873 mm, Equipment: rotational speed infinitely variable, MORI SEIKI SL154SY LATHE WITH LNS BAR FEEDER Kedoxddfvjpfx Ahveww RENISHAW LASER CHECKED TOOLBOX. MACHINE INSPECTED AND READY TO WORK IN OPTIMAL CONDITIONS.

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, number of axes: 3, This 3-axis MORI SEIKI SL-403BMC/800 was manufactured in 2002. It features a maximum turning diameter of 650 mm and a maximum turning length of 863 mm. The machine offers an X-axis travel of 345 mm and a Z-axis travel of 995 mm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-403BMC/800 horizontal turning machine we have for sale. Contact us for further details. • Swing over bed: 710 mm • Swing over cross slide: 738 mm • Max. turning diameter: 650 mm • Max. turning length: 863 mm • Distance between centers: 1,125 mm Kwsdpoyvf Sijfx Ahvew Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Mori Seiki SL-25 CNC Lathe with Samsys Bar Feeder Kwjdpfx Ahjyu R Rzovjw We are offering a highly reliable and robust Mori Seiki SL-25 (1995) CNC lathe. This machine is well known for its exceptional stability and precision in serial production and is sold complete with a Samsys automatic bar feeder (2003) for maximum efficiency. Machine Specifications Model: Mori Seiki SL-25 Control: Mori Seiki 516 (Fanuc CNC control and drives) Swing over bed: approx. 520 mm Max turning diameter: approx. 260 mm Max turning length: approx. 530–550 mm Spindle bore: 68 mm Spindle speed: up to 3,500 rpm Turret: 10 stations Tool setter and parts catcher included Equipment: Hydraulic tailstock, chip conveyor, and coolant system Documentation: User manuals included Productivity: The combination of Mori Seiki’s rigid construction and Samsys automation makes this an ideal solution for small to medium batch production. Samsys Bar Feeder (MUS 2000) The machine is equipped with an integrated Samsys MUS 2000 bar feeder, enabling long periods of unattended production. Includes multiple spindle liners in various dimensions High precision: Servo-controlled bar feed for accurate positioning Quick changeover: User-friendly design allowing fast change of bar diameters

Condition: good (used), Year of construction: 2006, Year of manufacture: 2006 CNC control: Mitsubishi MSX-850 X-axis travel (mm): 260 Z-axis travel (mm): 795 Y-axis travel (mm): 100 Swing diameter over bed (mm): ø 920 Swing diameter over cross slide (mm): 742 Upper turret Number of tool stations: 12 Main spindle Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5/15 Spindle bore (mm): 91 Chuck type: Hollow Chuck (10") Manufacturer: KITAGAWA Kwodpfx Aov Egqzohvow Tailstock Tailstock travel (mm): 734 Taper: MT3 Equipment Chip conveyor Signal light High-pressure pump Foot switch for chuck or collet system Interface for bar feeder Basic machine: Dimensions/Weight Length (mm): 2,620 Width (mm): 1,898 Height (mm): 2,200 Weight (kg): 6,140

Condition: ready for operation (used), Year of construction: 1989, This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. • Tailstock Additional equipment • Three-jaw chuck and dead-collet head 185e • Chip conveyor Kwsdpfx Ahex D R Rrovow • Clamping wedges for tools

Condition: good (used), Year of construction: 1990, CNC machining center Manufacturer: MORI SEIKI Model: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel ranges: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse rate: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw spindle: 36 mm diameter Feed drives: FANUC AC X/Y-axis Model 5, Z-axis Model 10 Main spindle speed: 100 – 6000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: +/- 2 seconds Repeatability: +/- 1 second Pallet clamping force: 3,400 kg Maximum workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 s Collet clamping time: 7 s Maximum tool diameter: 110 mm Maximum tool length: 250 mm Maximum tool weight: 8 kg Special equipment: Work end display with warning light Magazine for 30 tools Operating hours display Tool life monitoring Coolant system Ksdjt Rg E Sepfx Ahveww Work area illumination Weight: approx. 4,500 kg Required floor space: 1,900 x 2,300 mm 17326ä

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 389 mm, turning length: 485 mm, turning diameter: 678 mm, spindle bore: 86 mm, spindle speed (max.): 3,500 rpm, feed length X-axis: 236 mm, feed length Z-axis: 495 mm, chuck outer diameter: 254 mm, controller model: Mori Seiki MSG-501, Twin Spindle Lathe with Mori Seiki MSG-501 Control, Kwjdpfx Ahoyguzzjvsw Live Tooling. 12 Station ATC, 3 Jaw Chuck 250mm, CHip Conveyor, 170mm 3 Jaw Chuck

Condition: used, Year of construction: 1990, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Lathe Mori Seiki Type SL-3H CNC Fanuc Complete Without conveyor Without jaw chuck Kwedpjykkzxefx Ahvjw

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki Lathe 3 Axes X, Z, C Model SL-45 MC Year 1995 Fanuc CNC Without jaw chuck With tooling With chip conveyor With documentation Complete Kwsdpsykkzfefx Ahvow

Condition: used, Year of construction: 1988, ohne Gewähr weight of the machine ca. 4 t Kodpsyiu Tpjfx Ahvoww

Condition: like new (used), Year of construction: 1999, functionality: fully functional, MORI SEIKI SL-600B/2000 CNC LATHE Category: CNC Turning Centers Reference No.: 400212 Capacity: Ø900 X 2000 MM Year of Construction: 1999 Technical Specification: CNC Control : Fanuc 18iT WORKING CAPACITY Max Turning Diameter : 900 mm Max Turning Length : 2000 mm Swing over bed : 994 mm Distance Between Centers : 2300 mm Swing over cross slide : 733 mm Travels (X) : 485 mm (440 + 45) mm Travels (Z) : 2150 mm TURRET Turret : 12 Station Square tool shank size : 32 mm Boring bar shank diameter : 65 mm TAILSTOCK Tailstock : MT5 Tailstock Quill Travel : 150 mm Tailstock Quill Dia : 150 mm SPINDLE Max Rotation Speed : 1500 RPM Main Spindle Nose : JIS A2-15 Main Spindle Bore : 185 mm Spindle Type : 3 Step Gearbox Spindle bearing inner diameter : 260 mm Kedpfjx Nv Shex Ahvoww MACHINE DIMENSIONS Weight : 16T Additional Details: All Specifications are found online, and subject to verification by buyer.

Year of construction: 2007, condition: used, 4 pcs. rope pulleys for counter weight of a FB 225 Kodpfx Ajd Nbkzohvjww

Condition: used, Year of construction: 1998, Lathe Mori Seiki SL 300B/700, year of manufacture: 1998 Kwedpfx Ajyhlzzjhvsw

Condition: used, Year of construction: 1996, Lathe Mori Seiki SL 35 Kwjdpfxeyhlzbo Ahvjw Year of manufacture: 1996

Condition: used, Year of construction: 1998, Lathe Mori Seiki SL 200 SMC Year of manufacture: 1998 Kwodpfx Ajyhly Rjhvjw

Condition: used, Swing Diameter Over Bed: 400 mm Swing Diameter Over Longitudinal Slide: 350 mm Distance Between Centers: 610 mm Travel Limit: 240 mm Suggested Workpiece Diameter: 200 mm Max Longitudinal Travel: 560 mm Machining Length: 550 mm Max Cross Travel: 40 mm + 120 mm Height of Spindle Axis from Floor: 1135 mm Programmable Spindle Speed Range: 40 to 4000 rpm Spindle Bore Diameter: 52 mm Spindle Interior Cone: MK 6 Slide/Bed Slope: 45/45° Turret Positions: 12 Tools Main Motor: 15 kW Control: Kwjdpfx Ahsxg Nd Aevsw Fanuc 6T Equipped with: See photos

Condition: used, Year of construction: 2001, Turning length 470 mm Max. torning dia. 390 mm Spindle speeds 3500 rpm Kedpexdfi Nefx Ahveww Movements X/Z - 235/520 mm No of stations in turret 12 pcs. Control: MSG 500 Accessories: Various tool holders

Condition: used, Year of construction: 1998, turning length: 800 mm, turning diameter: 600 mm, spindle bore: 127 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, Mori Seiki SL-400B CNC Lathe (1998) Kjdpex Hpw Sefx Ahvsww Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 1998 Control System: Mori Seiki MSC-501 Machining Capacity Maximum Turning Diameter: approx. 600 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 940 mm X-Axis Travel: approx. 343 mm Z-Axis Travel: approx. 993 mm Spindle Nose: A2-11 Spindle Bore: approx. 127 mm (5") Spindle Speed: up to 2,400 rpm Spindle Motor Power: approx. 30 kW Tool Turret: 12 Stations Machine Weight: approx. 9,500 Machine Dimensions (L × W × H): approx. 4,300 × 2,000 × 2,100 mm

Condition: used, Year of construction: 1998, turning length: 800 mm, turning diameter: 600 mm, spindle bore: 127 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, Mori Seiki SL-400B CNC Lathe (1998) Machine Type: CNC Turning Center (2-Axis) Kodpfx Ahex Hpvuovsww Year of Manufacture: 1998 Control System: Mori Seiki MSC-501 Machining Capacity Maximum Turning Diameter: approx. 600 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 940 mm X-Axis Travel: approx. 343 mm Z-Axis Travel: approx. 993 mm Spindle Nose: A2-11 Spindle Bore: approx. 127 mm (5") Spindle Speed: up to 2,400 rpm Spindle Motor Power: approx. 30 kW Tool Turret: 12 Stations Machine Weight: approx. 9,500 Machine Dimensions (L × W × H): approx. 4,300 × 2,000 × 2,100 mm