Used Dmg Nef 400 for sale (393)

Year of construction: 2013, operating hours: 25,877 h, condition: used, machine/vehicle number: 01620008481, Tool holder: VDI 30, weight: 3,265 kg, control system: SIEMENS, 1 chip conveyor, 1 set of VDI 30 tool holders, approx. 50 pieces, approx. 8 powered tools, on a transport trolley. Bdsdpfx Adjzha Aljrsd

Condition: good (used), Year of construction: 2009, functionality: fully functional, Control system: Siemens / ShopTurn Max. turning diameter: approx. 385 mm Max. turning length: approx. 650 mm Power supply: 400 V Frequency: 50/60 Hz Power consumption: 21 kVA Max. current: 31 A CE: yes Bdodpfx Aezgvf Tsdrsd

Condition: used, Year of construction: 2014, operating hours: 1,760 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 650 mm, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, rotational speed (max.): 4,500 rpm, swing diameter over cross slide: 380 mm, chuck outer diameter: 210 mm, bar diameter (max.): 66 mm, Equipment: documentation/manual, We offer this used DMG MORI NEF 400 CNC lathe, year of manufacture 2014. type: NEF 400 serial number: 01620009641 year of manufacture: 2014 max spindle speed: 4,500 rpm Hydraulic chuck Swing over cross slide: 380 mm Turning length: 650 mm Siemens ShopTurn 840 D Bar diameter: 66 mm Hydraulic tailstock 12-position turret Bedpfxey Iuvce Adrsdd With chip conveyor Only 1,760 spindle hours If you have any questions or would like more information, please feel free to contact us or give us a call.

Condition: used, Year of construction: 2002, turning diameter 400 mm Bdjdpfx Adoy I A U Horjd turning length 635 mm control Heidenhain Eltropilot greates pass round over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm drive of main spindle 21 kW max. torque on the spindle 240 Nm main spindle speeds: 25-5.000 turning speed range - C-axis 100 U/min feed power in the axis x + z 3,5 / 7 N rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min total power requirement 44 kva weight of the machine ca. 6 t

Condition: good (used), Year of construction: 2008, Vertical CNC Lathe Machine type: Gildemeister CTV 400 V3 Control: Sinumerik 840D powerline (XP) Year of manufacture: 2008 TECHNICAL DATA: X-axis: 700 mm Z-axis: 340 mm C-axis Max. spindle speed: 3,500 rpm Drive power: 47 kW Torque: 1,100 Nm Direct drive Number of turrets: 1 Tool stations: 12 Driven tools: 12 Tool holder: VDI 50 Number of pallets: 15 Accessories: Bedjw Rbcyopfx Adrodd

Condition: good (used), Year of construction: 2003, functionality: fully functional, spindle bore: 52 mm, turning length: 750 mm, turning diameter: 320 mm, rotational speed (max.): 4,000 rpm, Cycle lathe Gildemeister NEF 320 Control system: Heidenhain Manual Plus Year of manufacture: 2003 Spindle speed: 10 - 4,000 rpm Power: 9 kW Number of gear stages: 2 Tailstock: MK5 Multifix B with various tool holders Main spindle with collet chuck including collet set Machine in fully functional condition Coolant system Chip tray Bjdjzfq Nqspfx Adrjdd Chuck guard CE conformity Machine can be inspected in Remscheid while powered on.

Condition: used, Year of construction: 2003, Machine hours: 1,594 h Technical specifications: Swing over bed: 320 mm Swing over face: 150 mm Clamping width, approx.: 800 mm Lathe chuck: 200 mm Lathe spindle size: 6 Spindle mount: MT 6 Speed range: 14 - 3,550 rpm Cross travel: 185 mm Spindle bore: 52 mm Quill: 70 mm Quill mount: MT 5 Bdjdpfx Aowlhn Hodrjd Quill stroke: 120 mm Max. torque: 32 Nm Gear ratios: 2 Drive power: 7 kW Multifix tool carrier: size B Dimensions (L x W), approx.: 2,600 x 1,440 x 1,800 mm Weight, approx.: 1,500 kg Control system: SINUMERIK 810DE-L CCU0 (Cycles for taper turning and thread machining

Condition: ready for operation (used), Year of construction: 2005, operating hours: 53,201 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 1,585 mm, controller manufacturer: SIEMENS, tool weight: 10,000 g, number of axes: 7, This 7-axis Gildemeister GMX 400 Linear was manufactured in 2005. It features a maximum turning diameter of 640 mm and a turning length of 1585 mm. The machine is equipped with a Siemens Sinumerik 840D Powerline CNC control and offers rapid traverse speeds of 40 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister GMX 400 Linear turn-mill centre we have for sale. Contact us for further details. • B-axis swivel range: ±120° • C-axis resolution: 0.001° • Rapid traverse (X/Y/Z): 40 / 24 / 60 m/min • Maximum turning diameter: 640 mm • Standard turning diameter: approx. 400 mm • Maximum turning length: 1585 mm • Bar capacity: approx. 90–92 mm • Chuck diameter: 250 mm • Counter spindle speed: 4000 rpm • Maximum torque: approx. 600–730 Nm Bjdpfx Aoy Uvxxsdrsdd • Milling spindle: Integrated motor spindle (ISM) with B-axis • Milling spindle speed: 12,000 rpm • Milling spindle power: 13.2 / 22 kW • Milling spindle max. torque: approx. 100 Nm • Turret: 12-position driven turret • Tool shank: 40 mm, DIN 69880 • Tool length limits: 200–350 mm • Maximum tool diameter: 80–140 mm • Maximum tool projection: 60–70 mm • Connected load: 100 kVA • Additional notes: Linear drive technology; Made in Germany; Machine under power and available for inspection Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,779 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 362 mm, travel distance Z-axis: 1,250 mm, spindle motor power: 28,000 W, overall weight: 6,000 kg, controller manufacturer: SIEMENS, controller model: 840D SL, number of slots in tool magazine: 12, number of axes: 3, This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details. • Turning length: 1200 mm • Main spindle: Integrated spindle motor • Turret: 12-station disc turret • Tool holder standard: VDI 40 • C-axis brake: Hydraulic • Tailstock: Automatic • Coolant system: Coolant equipment with chip pan • Operating software: ShopTurn • Control panel: ERGOline operating panel • CAD reader: External PC compatible • Hydraulic unit: Included for clamping device and steady rest • Hollow clamping device: Hydraulic • Max draw tube diameter: 95 mm • Coolant spray gun: Included • Chip conveyor: Right side discharge • Chip conveyor discharge height: 1250 mm • Steady rest type: Self-centering steady rest • Steady rest range: Ø 50–200 mm • Chuck type: 3-jaw power chuck • Chuck model: ROTA-NCK plus • Tool spindle 1: Angled 90° live tool holder • Tool spindle 2: Straight 0° live tool holder • Tool spindle application: Drilling, milling and tapping • Tool holder shaft standard: DIN 69880-40 • Electrical cabinet cooling unit: Up to 40°C • DMG Netservice onboard: Installed OPTIONAL Bodpsy Twc Nsfx Adredd approximately 100 different tool holders (VDI holders) Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 2007, operating hours: 24,276 h, Gildemeister Lathe NEF 600 Year of manufacture: 2007 Control: Heidenhain Plus Max. turning diameter: 600 mm Centre distance: 1,250 mm Swing over bed: 600 mm Bdedpfx Asykbk Rjdred Cross travel: 320 mm Main spindle: Speed range - main spindle: max. 3,000 rpm Spindle bore: 90 mm Chuck diameter: 320 mm Tool turret: Number of tool positions: 8 positions Total power requirement: 42 kVA Machine weight approx.: 5.0 t Space requirement approx.: 3.6 x 2.14 x 1.95 m Accessories: Rinsing gun, Schunk chuck 315 mm, Tailstock MK 5

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,504 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 110 mm, overall weight: 20,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D Powerline, number of axes: 7, This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spindle with a max speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking to get high-quality turn-mill capabilities, consider the DMG Gildemeister GMX 400 linear machine we have for sale. Contact us for more information. Additional equipment • Oil mist extraction • Coolant tank with belt filter system • Internal coolant system with 80 bar pressure • Approx. 30 tool holders Machine Benefits Technical Machine Benefits • Drive power - main spindle: max. Torque 600 nm • B-axis: +/- 120° • C-axis resolution: 0. 001° and 1° • Maximum turning diameter: 640 mm • Turning length: 1585 mm • Standard turning diameter: 400 mm • Distance between centers of main spindle: max. Bar diameter 90 mm • Chuck diameter: 250 mm (max. 400 mm) • Number of tool positions: 12 positions • Turret tool holder: 40 mm din 69880 Extra Information Bjdpfx Ajx D S Dgjdrjdd Machine still under power

Condition: ready for operation (used), Year of construction: 2007, Make: DMG Type of machine: Nef 600 Year of manufacture: 2007 Bdodoxnpbqopfx Adred Control system: Fanuc 210 is Machine's weight: 5,5 t Tool holder: VDI 40 x-travel: 320 mm z-travel: 1250 mm Speed range: 3000 U/min Cutting diameter: 600 mm Turning length: 1250 mm Overall dimensions: 4000 x 2200 x 2000 mm Tool turret - slots: 8 Pl. Spindle opening: 90 mm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 1 used CNC turning machine DMG Gildemeister NEF 600 - Year of manufacture: 2010 Operating hours: approx. 40,600 h - Spindle hours: approx. 17,900 h Refurbished by DMG Mori in 2025: Electronic control unit Bdedpfx Adezfafzsrod Control system: Siemens Sinumerik 840D (ERGOline) Max. turning diameter: 600 mm Swinging diameter over slide: 490 mm Turning length: 1,190 mm | Distance between centers: 1,335 mm Bar capacity: 75 mm | Spindle bore: 90 mm Travel X / Z: 398 / 1,250 mm Spindle nose A8 DIN 55026 | Chuck 250 / 315 mm Max. speed: 3,000 rpm Power (100 % / 40 % duty cycle): 27.5 / 39.4 kW Torque S1 / S6: 600 / 845 Nm Tool turret, 12 stations, VDI mounting (static and driven) Tailstock, hydraulic, travel 1,150 mm, max. 1,250 daN, MK 5 Connection: 400 V / 50 Hz / 42 kVA Includes: Chip conveyor Hydraulic 3-jaw power chuck SCHUNK Extensive tool package: numerous VDI holders, static and driven (including boring bar holders, drilling and collet chuck holders), mostly brand Holex, without cabinet Technical documentation (German) Footprint: L x W x H: 3,697 x 2,687 x 1,936 mm | Total weight approx. 7,000 kg Technical data subject to change, prior sale reserved. Used machines and accessories are always sold without warranty!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, workpiece height (max.): 900 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 2,800 mm, total length: 5,500 mm, total width: 3,500 mm, table width: 400 mm, table load: 400 kg, rotational speed (min.): 14,000 rpm, overall weight: 12,000 kg, spindle speed (max.): 14,000 rpm, coolant supply: 70 bar, spindle motor power: 18,500 W, spindle nose: BT 40, number of slots in tool magazine: 60, tool length: 400 mm, tool diameter: 140 mm, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained DMG MORI machine, complete with all documentation, available for inspection while powered on. - Table with 0.001° precision - 60 tool capacity - Chip conveyor - High-pressure system KNOLL 70 bar - Tool setting device Metral + - Fixed cycles - 48 zero-point offsets - Coordinate system rotation Bedpezdgcfjfx Adrjdd - Fanuc 31iA control

Condition: good (used), Year of construction: 2016, Contact us for more information Bdjdpfey Enr Ssx Adrjd

Condition: used, Year of construction: 2017, Technical details: x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm control: Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds: 20 - 20.000 1/min spindle drive: 25/ 35 kW max. torque on the spindle: 86 / 130 tool taper: HSK-A63 Number of tool station: 60 diameter of tools max.: 70 mm Tool diameter with no neighbouring tools: 170 mm tool length - max.: 450 mm weight of tools max.: 12 kg numbers of pallets: 2 Pallet dimension: 400 x 400 mm max. workpiece diameter: 630 mm workpiece height max.: 900 mm table load: 400 kg rapid travel x/y/z: 60 m/min Feed x/y/z: 60 m/min internal coolant system feed: 70 bar weight of the machine ca.: 8,5 t dimensions: 3200 x 4800 x 2900 mm Accerories Rotoclear window Bedpfx Adsyqybbsrjdd Signal lamp 4 colours Electronic handwheel Probe for tool breakage and length measuring Coolant shower Renishaw probe (spindle) Vorbereitung / preparation only HSK cone cleaning station with brushes Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spindle. *

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Hello I have for sale a reputable brand CNC lathe GILDEMEISTER CTX 400 V3 With driven tools and C axis. _ Type: CNC lathe machine Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 1190 + TURN PLUS overlay Country of manufacture: Germany Year of manufacture: 1997 _ Machine parameters: - head: 12 - tools for VDI 30 toolholders ( every second socket driven ) - max rpm 5000/min. - max length of turning in Z axis: 640 mm - max diameter of turning in X axis: 290 mm - C axis - driven tools - tool measuring probe - spindle holder BERG KH 200 - max. roller diameter Fi-65 mm- finished part pick-up - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM ? - we have our own service _ stationary and mobile - we have already sold more than 700 DMG machines Bjdpstw U E Uofx Adrsdd - possibility to start up the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines are after professional technical inspection - 100% ready to work - purchase of the machine is possible through the installment system and leasing. _ www_ppmsc_en _ Tom_Contact_+48 504 009 641 Paul_Contact_+48 607 305 841

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hello I have for sale a renowned brand CNC LATHE GILDEMEISTER CTX 400 V3 with driven tools and C axis. _ Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 400 V3 Control: HEIDENHAIN 3190 + TURN PLUS Overlay Country of manufacture: Germany Year of manufacture 2000 _ Machine parameters: - head: 12 - tools for VDI 30 holders (every second socket driven) - max. rpm 5000/min. - max. turning length in the Z axis: 640 mm - max. turning diameter in the X axis: 290 mm - C axis - driven tools - BERG KH 200 spindle holder - max. shaft diameter Fi-65 mm - finished part collector - cooling system - hydraulic tailstock - chip conveyor - spindle drive power: 21 KW - DTR - machine weight: 5.2 tons _ WHY IS IT WORTH BUYING MACHINES at PPM? - we have our own service _ stationary and mobile - we have already sold over 700 DMG machines - possibility of starting the machine at the customer's - operator training and delivery of the machine to the customer included in the price - all our machines have undergone a professional technical inspection - 100% ready to work Bodpfx Adstpuh Aersdd - purchase of the machine is possible through the installment system and leasing.

Condition: used, Year of construction: 2013, x-travel 735 mm y-travel 650 mm z-travel 560 mm control 840D sl FD operate Siemens turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 35 / 24 kW max. Torque 119 Nm tool taper HSK-A63 DIN 69893 table diameter 680 mm Bsdpfx Aezipzyedrsdd max. table load 600 kg max. workpiece sizes 650 x 650 x 500 mm swivellable +/- 120 ° rotatable 360 ° number of toolpositions 30 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg change-time chip to chip ca. 4,9 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min total power requirement 65 kVA weight of the machine ca. 11,6 t dimensions of the machine ca. 4,0 x 3,0 x 2,95 m 5 Axis CNC - MachiningCenter Universal DMG - DMU 65 FD monoBLOCK - Swivel-Rotary-Table - without tools - only 8,444 operating hours - only 2,246 spindle hours - Air blast cooling through spindle center - MDynamics package - Power failure safety package - Coolant ring jet: 7x air jets, 13x water jets - Tropical package (35° – 50° Celsius) - Coolant unit (ICS) with two pressure levels: 40 and 80 bar - Use of special tools (18 kg / 370 mm)

Condition: good (used), functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Bdedpezim Aujfx Adrod Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Bar capacity:67 mm Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm Bar capacity:67 mm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow clamping cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix Hydraulic clamping:Differential pressure clamping Coolant supply:External and internal Bedpfx Aszig Tmsdrodd Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:80 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 bar Tool monitoring:Easy Tool Monitor Tool measurement:Tool setter, Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Emulsion mist separator:Mechanical Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop

Condition: ready for operation (used), Year of construction: 2011, operating hours: 39,205 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG MORI DMU 65 MonoBlock was manufactured in 2011. It features impressive X, Y, and Z travels of 735 mm, 650 mm, and 560 mm respectively, along with a spindle speed of 18,000 rpm. The machine is equipped with a tool changer that has 30 magazine positions and utilizes a Heidenhain iTNC 530 control type. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 65 MonoBlock vertical machining centre we have for sale. Contact us for further details. Bjdpfxozidqcs Adredd

Condition: good (used), Year of construction: 2013, Traverses X Y Z; 500 x 450 x 400mm, table size 630 x 500mm, table load 200 kgs, B axis -5/+110 degrees, C axis 360 (0.001 degrees), spindle speed 12,000rpm, spindle taper Iso 40, Bjdpfozicmpsx Adrjdd 30 station ATC, Siemens 840D control, swarf conveyor.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 38,452 h, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 24,000 rpm, This 3-axis DMG MILLTAP 700 was manufactured in 2016. It features a 24,000 rpm spindle, 60 m/min rapid traverse, and a quick tool change system. Equipped with a Siemens 840D control and a Renishaw 3D probe, it offers precision and efficiency. Consider the opportunity to buy this DMG MILLTAP 700 vertical machining centre. Contact us for more information about this machine. Additional information • Quick tool change • Tool breakage detection Bjdpfx Adex D Nkkjredd • 25 tool positions • Renishaw 3D probe • AFS extraction system • High pressure • Belt filter system • Rapid traverse speed: 60 m/min • New spindle installed June 2026, only 5 spindle hours

Condition: ready for operation (used), Year of construction: 2020, operating hours: 5,838 h, travel distance X-axis: 1,100 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, tool weight: 8,000 g, number of axes: 3, This 3-axis DMG MORI CMX 1100 V was manufactured in 2020. It features an X-axis travel of 1100 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a clamping area of 1400 x 560 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI CMX 1100 V vertical machining centre we have for sale. Contact us for further details. Bdjdpfx Aezibzxodrsd • Distance spindle nose to table: 120–630 mm • Clamping area: 1400 x 560 mm • Spindle power: 13 kW (40% DC) / 9 kW (100% DC) • Spindle torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool magazine: 30 pockets (double gripper, loaded through spindle, programmed via control panel) • Max. tool diameter: 80 mm (130 mm with free adjacent pockets) • Max. tool length: 300 mm (from spindle face) • Max. magazine load: 120 kg • Feed drives: AC drives with ball screws • Feed rate (X/Y/Z): 30 m/min • Rapid traverse (X/Y/Z): 30 m/min Additional equipment • Renishaw tool probe • Renishaw workpiece probe • Clamps/workholding set Technical Specification Taper Size SK 40