Used Mori Seiki Mv 40 for sale (203)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool changer Number of tool stations: 60 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent station empty: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Dsdpfoyxm Irjx Alfokw Feed rate: 1 – 24,000 mm/min Creep feed rate: 0 – 1,260 mm/min MACHINE DETAILS Control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Required space approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Coolant system High-pressure coolant Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B axis Hydraulic unit Spindle oil cooler Note: The loading shaft must be supplied by the buyer.

Condition: excellent (used), Year of construction: 2007, Mori Seiki NL2500Y/700 CNC lathe Year: 2007 Control: MORI MSX-850 III Main spindle: Spindle nose: A2-8 Main spindle drive power: 18.5 kW Max. main spindle speed: 4000 rpm Max. spindle bore: 80 mm Max. turning diameter: 366 mm C-axis 0.001 degree TURRET: Number of positions: 12 pcs. Number of driven tools positions: 12 pcs. Min. spindle indexing increment 0.001° Travel X/Z axis: 280 / 785 mm Travel Y axis: +/- 50 mm Max. speed driven tools: 6000 rpm Power driven tools: 5.5 kW TAILSTOCK: Taper: MT5 Distance between centers: 705 mm ELECTRICAL SUPPLY: Total drive: 39 kVA WEIGHT AND DIMENSIONS: Space requirements: 3800 x 2143 mm Machine height: 2232 mm Machine weight: 6100 kg Accessories/options: Dsdpfx Aeyxpprelfskw - 2 cabinet accessories - 5 pieces driven tool holders, several static holders - collets, inserts, tools, sleeves, etc.... - high pressure paper band filter type, micro filtered, coolant tank - swarf conveyor - collet type chucks, different sizes - Kitagawa 3-jaw hydraulic chuck diameter 210 mm - Full set of documentations - Parts catcher Under power in our warehouse. Video available upon request!

Condition: excellent (used), Year of construction: 2008, operating hours: 22,090 h, Machine type: CNC turning and milling center Manufacturer: MORI SEIKI Type: NL 2500 Y / 1250 Year of manufacture: 2008 Control system: MSX 850 III Technical data: Turning diameter: 275 mm Turning length: 1,298 mm Control system: MSX 850 III Swinging diameter over bed: 923.8 mm Swinging diameter over cross slide: 755 mm Max. turning diameter: 356 mm Max. bar diameter: 80 mm Main spindle: Speed range - main spindle: 4,000 rpm Drive power - main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 91 mm Spindle bearing diameter: 140 mm C-axis: 0.001° Travel: X-axis: 260 mm Z-axis: 1,345 mm Y-axis: +/- 50 mm Turret: Tool positions: 12 Shank height for square tools: 25 mm Shank diameter for boring bars: max. 50 mm Turret indexing time: 0.25 sec. Speed range of driven tools: 6,000 rpm Drive power - driven tools: 5.5 / 3.7 kW Feed rate: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse Y-axis: 10 m/min Tailstock: Tailstock travel: 1,284 mm Quill diameter: 110 mm Taper: MT 5 Rapid traverse: 7 m/min Total power requirement: 38 kVA Dksdpfx Aloz S Rk Hefew Machine weight approx.: 7.5 t Space requirement approx.: 5.5 x 3.4 x 2.3 m

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, total height: 2,674 mm, table width: 600 mm, table length: 1,350 mm, table load: 1,000 kg, overall weight: 6,400 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, product length (max.): 2,740 mm, number of axes: 3, This 3-axis MORI SEIKI DuraVertical 5100 was manufactured in 2007. It features an X-axis travel of 1,050 mm, Y-axis travel of 530 mm, and Z-axis travel of 510 mm. The machine has a robust table size of 1350 x 600 mm and a maximum table load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DuraVertical 5100 vertical machining center we have for sale. Contact us for further details. • CNC control: MSC-504 • Distance spindle nose to table: 150–660 mm • Tool magazine: 30 tools, side-mount ATC Dksdpfx Aljzc Nfajfjw Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 12,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis MORI SEIKI NHX 5000 was manufactured in 2011. It features a generous X-axis travel of 730 mm, Y-axis travel of 730 mm, and Z-axis travel of 880 mm. The machine is equipped with a continuous 4th axis (B-axis) and a tool changer capacity of 60 positions. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining centre we have for sale. Contact us for further details. • Control unit: MAPPS IV CNC • Pallet dimensions: 500 x 500 mm • Table rotation: Continuous 4th axis (B-axis) Additional equipment • Chip conveyor • Coolant system with filtration unit and paper filter • High-pressure coolant, 90 bar • Tool presetting (tool measurement) Djdpez Earfefx Alfekw Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2002, operating hours: 1,230 h, turning length: 120 mm, turning diameter: 190 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 135 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 450 mm, bar passage: 40 mm, CNC Lathe Manufacturer: MORI SEIKI Model: ZT 1000 Y Year of Manufacture: 2002 Dkodpfx Aj Aaq Ugolfsw Control System: MSG-501 Technical Details: Turning Diameter: 190 mm Turning Length: 120 mm Max. Swing Diameter: 250 mm Distance Between Centers: 750 mm Bar Capacity (Through-bore): 40 mm X-axis: 135 mm Z-axis: 450 mm Y-axis: ±40 mm Spindle Speed: 6,000 rpm Number of Tool Stations: 16 positions Operating Hours: approx. 1,230 h The machine comes from its first owner and has very low operating hours. It has been very well maintained and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor - Parts catcher and discharge conveyor - High-pressure coolant system - 16-station upper turret with Y-axis - Bar feeder interface - Hainbuch collet chuck system - Three-jaw chuck - Static and driven (live) tool holders Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Dkedpfx Aljz R T Exjfsw Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, overall weight: 6,500 kg, CNC MSX 501 MAPPS II Opposed-spindle machine. Spindle size A2-6, twin spindles. 2 stacked turrets. 9-axis controlled turning and milling center. 2 turrets. Y-axis upper turret. 2 C-axes. Bar capacity: 65 mm. T wo integrated 15 kW motors. Tool life management and tool wear monitoring. Mapps 4 conversational automatic programming system. Automatic force control and tool wear monitoring. Oil cooler for both spindles. 340 Nm cutting torque. 15-position turret, all positions motorized. Automatic workpiece collector. Dkodpfx Alj Ahkb Dofew Bar loader LNS SPRINT S3 Interface for bar loader installation. Rear automatic part pick-up with a special gripper for long parts. Max. turning diameter: 320 mm. Turning length: 810 mm. Max. distance between main spindle and counter spindle: 920 mm. Main spindle speed: 5000 rpm. Counter spindle speed: 5000 rpm. X1 travel: 210 mm. Y1 travel: +50 / -50 mm. X2 travel: 210 mm. Counter-spindle travel: 920 mm. Number of powered tool stations: 2 x 15. Capable of holding 30 tools per turret. Large selection of external and internal tool holders. Large selection of axial and radial motorized blocks. Speed range of powered tools: 5.000 rpm. Drive motor for powered tools: 5.5 kW. Rapid traverse X1, X2: 25.000 mm/min. Rapid traverse Y1: 20.000 mm/min. Rapid traverse Z1, Z2: 30.000 mm/min. C-axis resolution: 0.001°. Collet chuck on main spindle. Self centering chuck on counter spindle External and internal tool holders. Motorized axial and radial blocks. Communication ports via USB, PCMCIA card, and RS-232. Rear chip conveyor. Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. Machine in very good condition. Machine weight 6.5 tons. Machine available for inspection while in operation.

Condition: used, Year of construction: 2006, machine/vehicle number: IntNr231573, A used MORI SEIKI NL 2500/1250 CNC lathe, year of manufacture 2006, is available for sale. The machine is equipped with a MORI SEIKI MSX 850III / MAPPS III control system and an IRCO SIMAG bar feeder for automatic bar loading. Technical data Control: MORI SEIKI MSX 850III / MAPPS III Origin: Japan Design: Slant-bed CNC lathe Centre distance: 1,250 mm Maximum turning length: 1,298 mm Maximum turning diameter: 356 mm Standard turning diameter: 275 mm Swing diameter over bed: 923 mm X-axis travel: 260 mm Dkedpfx Ao Ahq R Nelfsw Z-axis travel: 1,345 mm Spindle speed: up to 4,000 rpm Spindle bore: approx. 80 mm Turret: 12 stations Number of turrets: 1 Chip conveyor Driven tools C-axis Y-axis Machine weight: 7,600 kg Machine dimensions (L x W x H): 5,000 x 2,300 x 2,400 mm The machine can be inspected under power by prior appointment. Technical data and specifications subject to change and error. Sale subject to prior sale.

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" Dkedpfj Ah Rvhex Alfjw The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2002, turning diameter 390 mm turning length 507 mm control MSG 805 MAPPS max. turning diameter 390 mm greates pass round over bed 680 mm Swing dia. over traverse guideway 510 mm Dodpfsvzhiqex Alfokw centre distance 618 mm turning speed range - main spindle 45 - 4.500 min/-1 power capacity - main spindel 11 / 7,5 kW spindle bearing diameter 110 mm spindle bore 73 mm max. bar capacity 51 mm spindle nose JIS A2-6 chucking diameter 210 mm C-Axis 0,001 ° x-axis 235 (195+40) mm z-axis 520 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity driven tool-stations 5,9 / 4,5 kW Shank height for square tool 25 mm Drill shank diameter max. 50 mm turret change time 0,2 sec. tailstock adjustment 490 mm dia. of quill 85 mm taper of center MT 4 quill stroke 120 mm rapid traverse X: 18 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 30,1 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Turning- and Millingcenter MORI SEIKI - SL 204 MC

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main Spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet Changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B-Axis Switching time 90°: 2.5 sec Pallet changeover time: 6.0 sec Tool Changer Number of tool positions: 60 Max. tool diameter: 80 mm Max. tool diameter with adjacent magazine slots free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Dkodpfx Aloy R U Ecofew Chip-to-chip change time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Jog feed rate: 0 – 1,260 mm/min MACHINE DETAILS CNC control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Footprint approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Cooling device High-pressure coolant system Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B-axis Hydraulic unit Spindle oil cooler Note: Shaft for loading must be provided by the buyer.

Condition: ready for operation (used), Year of construction: 1990, operating hours: 18,891 h, travel distance X-axis: 135 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, number of axes: 2, Turn-mill centre manufactured in 1990. This MORI SEIKI SL 15 features a maximum swing over bed of approximately 450 mm and a standard turning diameter of around 160 mm. It offers a maximum turning length of approximately 525 mm and a spindle speed range of 50 to 6,000 rpm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL 15 machine we have for sale. Contact us for further details. Control: Mori Seiki MF-T4 (Fanuc-based CNC control)- Run Time (Operating Hours): 18,891 hours, 44 minutes- Part Count: 341,959- Cycle Time: 0 hours, 3 minutes, 40 seconds- X-Axis Travel: Approx. 135 mm (5.3 in)- Z-Axis Travel: Approx. 520 mm- Max. Swing Over Bed: Approx. 450 mm (17.7 in)- Standard Turning Diameter: Approx. 160 mm (6.3 in)- Max. Turning Length: Approx. 525 mm (20.7 in)- Distance Between Centers: Approx. 600 mm (23.4 - 25.4 in)- Spindle Bore: 52 mm (2.05 in)- Bar Capacity: Approx. 45 mm (1.77 in)- Spindle Speeds: 50 - 6,000 rpm- Tool Turret Capacity: 12 stations- Tailstock Taper: MT4- Spindle Motor Power: Approx. 7.5 / 5.5 kW (10 HP)- Voltage: 200/220 V, 3-Phase Technical Specification Dkedpj Aift Ijfx Alfjw Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2008, turning diameter 600 mm Dkjdpoz At T Hjfx Alfew turning length 1.045 mm control MSX - 711 III MAPPS III swing diameter over support 600 mm distance between spindles 1.255 mm max. bar capacity 65 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 22 kW no. of turning speeds 2 spindle nose JIS A2-6 spindle bore 73 mm internal diameter 120 mm C-Axis 0,0001 ° chucking diameter 200 mm Speed range Tool Spindle max. 12.000 min/-1 Power rating Tool Spindle 5,5 / 3,7 kW tool taper Capto C5 internal diameter 65 mm B - Axis 0,0001 ° swivellable +/- 120 ° x-axis 685 (610 + 75) mm y-axis +/- 125 mm z-axis 1 mm number of toolpositions 12 pos. Shank height for square tool 20 mm Drill shank diameter max. 32 mm tools in tool magazin 40 pos. max. tool diameter 70 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 4 kg change-time tool to tool 1,25 sec Rapid traverse X / Z: 50 m/min Rapid traverse Y: 30 m/min Rapid traverse X2 / Z2: 30 m/min total power requirement 88 kVA weight of the machine ca. 16,5 t dimensions of the machine ca. 6,0 x 4,0 x 3,0 m High-Precision 5 Achsen CNC-Turning- and Millingcenter MORI SEIKI - NT 3200 DCG / 1000 SZ - 5 Axis - Swivable Milling-Head (B-Axis) - Subspindle - lower turret - approx. 11,300 power-on hours - approx. 9,200 spindle hours

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table width: 600 mm, table length: 900 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis MORI SEIKI DURA VERTICAL 5060 was manufactured in 2007. It features a travel distance of 600 mm in the X-axis, 530 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a table size of 900 x 600 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DURA VERTICAL 5060 vertical machining centre we have for sale. Contact us for further details. • Travel X: 600 mm • Travel Y: 530 mm • Travel Z: 510 mm • Table Length: 900 mm • Table Width: 600 mm • Table Load: 500 kg • Spindle Speed: 10,000 rpm • Spindle Taper Options: SK40 / BT40 • Tool Positions: 30 Djdpezwvkkefx Alfokw Technical Specification Taper Size SK 40

Condition: used, TURNING CENTER "MORI SEIKI" MOD. ZL 200SMC With twin powered turret and sub-spindle CNC MSC-501 Turning length: 452 mm Max. turning diameter: 388 mm Max. diameter over bed: 510 mm Distance between centers: 751 mm Spindle mount: A2-6 Spindle speed: 4,000 rpm Spindle motor power: 11 kW Number of tools: 12 Dksdpfxoxwxwto Alfow

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm Dksdpfx Aozk U Rpslfow C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. A bar feeder can be added. *

Condition: used, Year of construction: 2012, turning diameter 465 mm axis distance 1.150 mm control Siemens 840D centre height 360 mm Swivel range via X-slide 465 mm chuck diameter 250 mm travel -x axis 300 mm travel -z axis 1.050 mm rapid power traverse in X-and Z direction 30 m/min Max. workpiece weight – chuck 150 kg Max. workpiece weight – tailstock 350 kg Max. workpiece weight – steady and tailstock 600 kg weight of the machine ca. 7,5 t dimensions of the machine ca. 2,5 x 5,3 x 2,2 m Equipment/Accessories: - 12-station tool turret (VDI 40 mount) - With 6 driven tool stations (VDI 40 coupling) Dkjdpfe Afztwsx Alfew - Hinged chip conveyor - Reinforced coolant pump (12 bar) - Hydraulic 3-jaw chuck (D 315 mm)

Condition: good (used), Year of construction: 2005, functionality: fully functional, FOR SALE CNC Lathe Mori Seiki NL2500Y/700 (year 2005) currently available for sale. Sales Notice: CNC Lathe with Y & C axes Mori Seiki NL2500Y/700 (2005) Dkodpfx Alo Af A Aysfew Original Japanese machine (August 2005), rigid, high-performing, and in good overall condition for your precision machining work. Main features: - Axes: Y axis (±50 mm) + C axis (high-precision spindle indexing) - Capabilities: Maximum turning diameter: 356 mm | Maximum turning length: 705 mm - Main spindle: Maximum speed 4,000 rpm | Spindle nose A2-8 | 26 kW motor - Turret: 12 tool positions - Numerical control: FANUC CNC - Actual readings: Power-on time: 31,946 hours | Cutting time: 24,441 hours Included equipment: - Lateral chip conveyor - Tailstock with rotating center - 4 single external chairs for the turret (Machine sold without a chip extraction system)

Condition: excellent (used), functionality: fully functional, fixed tool holders Machine: MORI SEIKI SL2000 Manufacturer’s tool turret: SAUTER ---- 2x → No. 444-119 Turning tool holder 25 mm steel holder Fixed turning tool holder Price: 150.00 €/piece ----- 1x → No. 444-201 Double turning tool holder for main spindle and counter spindle with 1x clamping strip for 25 mm tool steel Fixed turning tool holder Price: 250.00 €/piece ----- 1x → No. 444-210 Drill bar holder Djdsynb E Nspfx Alfokw Cylindrical mount, ø 32 mm Second mount, ø 32 mm; 57 mm towards the rear Price: 220.00 €/piece ----- 1 x → No. 444-205 Turning tool holder mount 25 mm steel holder Price: 150.00 €/piece Package price: 750.00 €/net, including shipping within Germany International shipping upon request.

Condition: used, Year of construction: 2011, functionality: fully functional, turning length: 810 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, bar diameter (max.): 65 mm, We offer this used Mori Seiki NZ2000 CNC turning and milling center, manufactured in 2011. Fully automated twin-spindle production cell with FANUC robot, PROMOT Automation, and TOP XF380 bar feeder. Year of manufacture: 2011 For sale is a MORI SEIKI NZ2000 T2 CNC turning machine as a complete, automated production cell with PROMOT Automation, FANUC industrial robot, and TOP Automazioni XF380 bar feeder. This system is particularly notable for its exceptional automation concept, of which there are only two in Europe. The combination of main spindle, counter-spindle, two turrets, bar feeder, and robot automation allows different machining and material flow processes to be automated within a single system. The main spindle is supplied with bar material via the TOP Automazioni XF380 bar feeder. The bar capacity of the machine is 65 mm. Finished parts can be ejected on this side via the existing parts ejector. Simultaneously, the FANUC industrial robot with PROMOT Automation handles the automated workpiece handling on the counter-spindle side. The workpieces are placed on or removed from a rotary table with multiple workpiece holders. This enables highly productive simultaneous machining on the main and counter-spindle. The system thus combines practically two automated machining processes within a single production cell. Equipment / Highlights  MORI SEIKI NZ2000 T2  Year of manufacture 2011  Main and counter-spindle  2 turrets  Simultaneous machining capabilities  Driven tools  TOP Automazioni XF380 bar feeder, year of manufacture 2011  Bar capacity MORI SEIKI NZ2000 T2: 65 mm  Automatic material feed via bar material  Parts ejector on the main spindle side  PROMOT Automation robot cell, year of manufacture 2011  FANUC industrial robot  Automatic loading and unloading on the counter-spindle side  Rotary table / workpiece storage with multiple workpiece holders  Integrated safety device and protective enclosure  Fully integrated and coordinated production cell Technical data  Max. turning diameter: approx. 320 mm  Max. turning length: approx. 810 mm  Bar capacity MORI SEIKI NZ2000 T2: 65 mm  Spindle bore: approx. 73 mm  Max. spindle speed main and counter-spindle: up to 5,000 rpm  2 tool turrets  Driven tools  C-axis on main and counter-spindle  Design without Y-axis  Simultaneous machining on main and counter-spindle  TOP Automazioni XF380 bar feeder, year of manufacture 03/2011 Dkedsz A S Uyepfx Alfsw  Bar capacity of the entire system: up to 65 mm round material, limited by the particularity of the system. In contrast to a conventional NZ2000 T2, this is not simply a CNC turning machine with a robot added later. The system was designed as a complete, automated manufacturing cell. Bar machining and robot handling can be combined within the same machine. While one side performs machining of bar material via the main spindle, the counter-spindle side can be automatically loaded and unloaded via the FANUC robot. This concept enables high machine utilization and is particularly suitable for series production and low-manned or automated production operations. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 39,768 h, travel distance X-axis: 235 mm, travel distance Z-axis: 520 mm, number of axes: 3, This 3-axis MORI SEIKI SL-250ASMC was manufactured in 1989. It features a Z-axis travel of 520 mm and a B-axis travel of 515 mm, providing versatile turning and milling capabilities. The machine is equipped with a chip conveyor and a bar feeder for enhanced productivity. If you are looking to get high-quality turning and milling capabilities, consider the MORI SEIKI SL-250ASMC turn-mill centre we have for sale. Contact us for further details. - Control Unit: Mori Seiki MSD-501II- Phase: 3- Frequency: 50 Hz- Voltage: AC 200 V- Full Load Current: 142 A- Current Rating of the Spindle Motor: 78 A- Interrupting Capacity: 5 kA- Electrical Diagram No.: AEF0253- Rated Power: 49 kVA- Operating Hours: 39,768 h- Number of Axes: 3 Main Axes (X, Z, C) + Sub-spindle/Tailstock (B)- X-Axis Travel: 235 mm- Z-Axis Travel: 520 mm- C-Axis Indexing: 360° (0.001° positioning)- B-Axis Travel: 515 mm- Optional Equipment: Chip conveyor, Bar feeder (Kurt Breuning IRCO Maschinenbau GmbH PROFIMAT Type 52.8 196, 2 kW, 200 V, 50 Hz, YOM 1998, Machine No. Technical Specification Counter Spindle No Dksdpfx Aoz Sp Nzolfsw Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, total height: 2,770 mm, table load: 500 kg, overall weight: 5,200 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 4, This 4-axis MORI SEIKI SV-400 was manufactured in 1998. It features a table size of 900 × 500 mm and impressive travels of 600 mm in the X-axis, 430 mm in the Y-axis, and 460 mm in the Z-axis. The machine includes a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30 stations. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI SV-400 vertical machining centre we have for sale. Contact us for further details. • Table: 900 × 500 mm; 4 T-slots (18 mm width × 100 mm pitch) • Number of axes: 4 (X, Y, Z + 4th rotary axis; 4th axis supplied by accessory listed below) • Distance spindle nose to table: 150–610 mm • Spindle: max; 22 / 18.5 kW motor; 85 mm front bearing ID • Tool magazine: max tool Ø 80 mm (adjacent) / 125 mm (non-adjacent); max tool length 300 mm; chip-to-chip 3.2 s • Feedrates: Rapid X/Y/Z 32,000 mm/min; max working feed 16,000 mm/min • Axis motor power: X/Y 2.1 kW; Z 4.4 kW • CNC control: MORI-FANUC MSC-501 (compatible with MSC-518); memory 320 m; functions include helical interpolation and cutting force control (Power Monitor) • Coolant system: 50 bar high-pressure through-spindle coolant (TSC) • Features: air blow for part cleaning, full enclosure, end-of-cycle lamp, RS-232 interface • Floor space: 2,200 × 2,550 mm • Electrical: total installed power 50.2 kVA; 380 V, 50 Hz Dkodpjy Uxigofx Alfsw Additional equipment • 4th axis attachment: Tsudakoma RN-150R rotary table with 200 mm faceplate and tailstock • Chip management: 2× rear-discharge chip conveyors Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2012, Technical data: Dksdpfxezn Rane Alfow 3-axis machine: X, Y, Z Travel ranges (X/Y/Z): 635 / 510 / 460 mm CNC control: SIEMENS 840D Table size: 790 x 560 mm Max. workpiece weight: 600 kg Tool holder: SK 40 Number of positions in the tool changer: 30 Spindle speed: 20 – 12000 rpm Motor power: 13 kW Dimensions (length x width x height): approx. 3400 x 2450 x 2800 mm Machine weight: approx. 4.3 tons Condition: very good condition, little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2003, functionality: fully functional, For sale used Mori Seiki VL-25A1 in excellent condition. Year: 2003 Dksdpfjuf Tb Ujx Alfow Mori Siki Mori Siki Mori Siki Mori Siki, 2003. Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request.