Used Mori Seiki Mv 40 for sale (203)

Condition: used, Year of construction: 2007, x-travel 560 mm y-travel 560 mm z-travel 630 mm Control MSX 701 III MAPPS Max. rpm 14.000 min/-1 power capacity - main spindel 18,5 / 11 kW max. Torque 120 Nm tool taper MAS BT 40 distance spindle center to table 80 - 640 mm distance Spindlenose and center of table 100 - 730 mm numbers of pallets 2 size of pallet 400 x 400 mm max. workpiece weight 400 kg max. workpiecediameter 630 mm max. workpiece height 900 mm change time of pallets 6,0 sec b - axis 0,001 ° number of toolpositions 60 pos. tool taper MAS BT 40 max. tool diameter 70 / (140) mm max. tool length 400 mm max. tool weight 8,0 kg rapid traverse ( X / Y / Z ) 50 m/min feed speeds 0 - 50.000 mm/min Tipp feed 0 - 1.260 mm/min Dkodpfswbi Adsx Alfow total power requirement 35 kVA weight of the machine ca. 9,8 t dimensions of the machine ca. 5,5 x 3,5 x 2,8 m CNC - Machiningcenter Horizontal MORI SEIKI - NH 4000 DCG - pallet-changer - Control options Program restart, cylindrical and spiral interpolation High-speed milling cycles, island and pocket milling cycles

Condition: used, Year of construction: 2004, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, controller manufacturer: MORI SEIKI, controller model: MSX-501, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,400 kg, Features a double pallet system, Mori Seiki MSX-501 control unit, but lacks the pallet lifting motor and the door guide. Workholding fixtures and tools are not included. Dsdpszxr U Iofx Alfjkw COLLECTION MUST TAKE PLACE BY SEPTEMBER 2026.

Condition: used, Year of construction: 2009, operating hours: 25,000 h, functionality: fully functional, Control system: MSX-701 IV (based on Fanuc) Spindle hours: approx. 18,400 Work area & travel ranges Travel range X/Y/Z: 560/560/630 mm Pallet size: 400 × 400 mm Dkedpfx Aljzxrawjfew Max. workpiece dimensions (D × H): Ø 630 mm × 900 mm Max. pallet load: 400 kg B-axis (table indexing): 1° (standard) or 0.001° full NC (DDM option) Main spindle & drives Spindle speed (standard): 14,000 rpm Tool holder: SK-40 and BT-40 Spindle power (30 min / continuous): 18.5 kW / 11 kW Max. spindle torque: 120 Nm Rapid traverse rate (X / Y / Z): 50 m/min Max. feed rate: 50 m/min Number of tool positions in the magazine: 120 Max. tool weight / length: 8 kg / 400 mm

Condition: used, Year of construction: 2000, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, MORI SEIKI SV-400 WITH 4TH AND 5TH AXIS VERTICAL MACHINING CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SV-400 YEAR 2000 Dkjdpfx Alotvau Hefew CONTROL MORI FANUC MSC 501 TABLE SIZE 900.0 x 500.0 mm TRAVERSES (XYZ) X: 600.0 mm Y: 430.0 mm Z: 460.0 mm SPINDLE SPEED Up to 12,000 rpm SPINDLE TAPER BT 40 ATC 30 STATIONS RAPID TRAVERSE XYZ: 32,000 mm/min FEEDRATE 1-16000mm/min PLUS NIKKEN 4th and 5th AXIS UNIT RENISHAW PROBBING TWIN SWARF CONVEYOR COOLANT SYSTEM

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, table width: 500 mm, table length: 900 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, spindle nose: BT 40, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8,000 g, Vertical Machining Center Manufacturer: MORI SEIKI Model: SV 400 Year of Manufacture: 1998 Control System: MSD-501 Technical Specifications: X-axis travel: 600 mm Y-axis travel: 430 mm Z-axis travel: 460 mm Table clamping surface: 900 x 500 mm T-slots (quantity x width x spacing): 5 x 18 x 100 mm Table load capacity: 500 kg Distance from spindle nose to table: 150 – 610 mm Spindle speed: 12,000 rpm Torque: 166.7 Nm Tool taper: BT 40 Number of tool stations: 30 positions Max. tool diameter: 80 mm Max. tool diameter (with adjacent pockets empty): 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Feed rate (X / Y / Z): 16,000 mm/min Rapid traverse (X / Y / Z): 32,000 mm/min Dsdpfx Alj Aaq Umofskw The machine comes from its first owner and has low operating hours. It has been very well maintained and can be inspected under power by appointment. Technical Features & Accessories: - Through-spindle coolant (TSC) - Tool measurement system - 30-station tool changer (BT 40) Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 1998, Offered is a horizontal machining center (HMC). Travels X/Y/Z: 560mm/510mm/510mm, max. dynamics: 40000mm/min, spindle: 12000rpm, tool holder: MAS BT 40, tool magazine: 60 positions (chain magazine), pallet system: 2-station pallet changer, pallet size X/Y: 400mm/400mm, accessories: approx. 200 tool holders (BT 40), 2 MMI towers with 8 clamping bars, hinged belt chip conveyor, Blum laser/probe, Renishaw 3D probe, machine weight: approx. 9000kg. Inspection possible by appointment. Dkedsyzh A Nopfx Alfjw

Condition: excellent (used), Year of construction: 2005, x-travel 630 mm y-travel 600 mm z-travel 670 mm Control MSX 501 Dkjdpfxeygx D Te Alfew spindle turning speed - stepless 14000 U/min tool taper BT 40 pallet chang. with pallet turn. 360x1 degree 2 max. workpiece weight 500 kg tool change unit 60 fach table-size 500 x 500 mm total power requirement 56 kW weight of the machine ca. 11,8 t dimensions of the machine ca. 5,8 x 3,6 x 3,0 m

Condition: used, Year of construction: 2009, controller manufacturer: Fanuc, controller model: 30i (MSX-711), _____ Description: Year of manuf. : 2009 Control : Fanuc 30i (MSX-711) Turning diam. : 920 mm Turning length : 1800 mm In General: Year of manufacture:2009 Control system:Fanuc 30i (MSX-711) Max. turning diameter:920 (470) mm Turning length:1,800 mm Bar capacity:103 mm Milling spindle:8,000 rpm, HSK 100 Main spindle: RPM:2,400 Max. power:37 kW Max. torque:1,432 Nm C-axis:0.001° Chuck:SMW Autoblok KNCS 500-155 Sub spindle: RPM:2,400 Max. power:37 kW Max. torque:1,432 Nm C-axis:0.001° Chuck:SMW Autoblok KNCS 500-155 Tool carrier I (X/Y/Z/B): Technology:Traveling column with milling spindle Milling spindle:8,000 rpm Dkedpfj Ad Uhrex Alfjw Power:30 kW Torque:302 Nm Tool holder:HSK 100 X-axis:1,040 mm Y-axis:510 (+/- 255 mm) mm Z-axis:1,940 mm B-axis:+/- 120°, index 1° Tool carrier II (X/Z): Technology:Cross slide with tool turret Tool drive:6,000 rpm, 40 Nm Number of stations:10 X-axis:267 mm Z-axis:1,830 mm Tool magazine: Technology:Chain magazine Tool changer:Double gripper Number of stations:80 Max. tool diameter:120 mm (250) Max. tool length:600 mm Equipment: Chip Removal:Chip Conveyor Coolant Supply:High pressure pumps Workpiece Measurement:Renishaw RMP 60 Emulsion Mist Separator:Electrostatic Setup:Electronic Handwheel Chuck:2x SMW Autoblock KNCS 500-155

Condition: used, Year of construction: 1999, Technical details: x-travel: 560 mm y-travel: 510 mm z-travel: 510 mm Dkjdpo Adth Rofx Alfjw control: Fanuc 18i M power capacity - milling spindle: 22 / 18,5 kW spindle turning speed - stepless: 12.000 1/min numbers of tools in magazin: 60 BT 40 size of pallet: 2x 400 x 400 mm max. workpiece diameter on pallets: 580 mm workpiece height max.: 650 mm feeds x/y/z -stepless: 16.000 mm/min rapid travel x/y/z: 32.000 mm/min total power requirement: 54 kVA weight of the machine ca.: 8,7 t dimensions of the machine ca.: 2,9 x 3,9 x 2,6 m Accerories Chip conveyor Coolant through Spindle 50 bar Knoll VRF unit Horizontal twin - pallet machining center with full 4th axis, 60-tool magazine BT 40 and 50 bar coolant through spindle. *

Condition: used, Year of construction: 2000, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller manufacturer: MORI SEIKI, controller model: MSX-502III, table width: 500 mm, table length: 500 mm, overall weight: 14,300 kg, With double pallet, Mori Seiki MSX-502III control system. Excluding workholding fixtures and tooling. Dksdpfxezxtbpj Alfsw PICK-UP BY SEPTEMBER 2026.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Length mm: 3,755 Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600 Dkjdpexfka Nofx Alfow

Condition: used, Year of construction: 2001, Technical details: x-travel: 560 mm y-travel: 510 mm z-travel: 510 mm control: Fanuc 18i GOP 3 spindle speeds: 12000 1/min spindle drive: 22 kW rapid travel x/y/z: 42 mm/min Number of tool station: 40 BT 40 Pallet dimension: 2x 400x400 mm table load: 0,5 t working diameter: max. 580 mm total power requirement: 56 kVA weight of the machine ca.: 8,7 t dimensions of the machine ca.: 2,9x4,1 m Djdpfx Aj Adtcnslfjkw Accerories Chip conveyor Coolant Gun Coolant shower Memory 125 Memory 320 m No. of tool offset pairs 64 offsets for parts 6 Macro B 82 var. Interface for coolant through the spindle spindle load monitor Program restart Coolant through Spindle 50 bar Knoll VRF unit Control Fanuc 18i M, 40 tool stations, trough spindle coolant Knoll 50 bar, 4th axis, Chipconveyor, twin pallet-changer tool magazine 40 BT 40 *

Condition: not inspected (used), Year of construction: 2003, Vertical CNC milling machine MORI SEIKI NV500A/50 (2003) at auction. MSG-501 control, X-axis travel 800 mm, table 1,100 x 600 mm, 30-tool magazine, spindle up to 8,000 rpm, machine weight approx. 6,700 kg. Used CNC mill Djdpfez I Ebqex Alfjkw

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 632, spindle speed (min.): 12,000 rpm, magazine for 40 tools BT40 toolholders MSC-501 control system Dedpfx Aljvun H Nefokw 2 pallets

Condition: good (used), Year of construction: 2003, CNC controller: MSX-501 Axes X-axis travel mm: 630 Y-axis travel mm: 600 Z-axis travel mm: 670 Dodpfjxq Hckex Alfskw B-axis degrees: 360º (0.001º indexing) Feed rates m/min: 50 Rapid traverse m/min: 50 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø800x1,000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 8,000 Spindle drive power kW: 18.5/22 Tool system Tool holder: ISO-40 Tool magazine slots: 60 Equipment Chip conveyor Signal lamp High-pressure pump Internal coolant supply

Condition: used, Mori Seiki MV45/45 machining center with Fanuc 11M control, travels X 820 / Y 555 / Z 550 mm, 4,500 rpm spindle (7.5 / 5.5 kW, BT 45) and Kitagawa 4th axis for simultaneous 4-axis machining. Professional through-spindle coolant retrofit by Deuschle Spindelservice — rotary union through the pull stud, hydraulic tool clamping with pressure intensifier, dedicated 15 bar pump switched via M50 — plus box guideways for exceptional rigidity, 2 mechanical gear stages delivering 200 Nm torque in low gear, and approximately 75 BT 45 tool holders (all with through-coolant passage) included. Box-guideway construction and 4-axis simultaneous capability make this a stable, versatile workhorse for complex parts. CNC CONTROL Controller: Fanuc 11M AXES Number of controlled axes: 4 Number of simultaneous axes: 4 X-axis travel mm: 820 Y-axis travel mm: 555 Z-axis travel mm: 550 4th axis / rotary table: Kitagawa SPINDLE Max. spindle speed rpm: 4.500 Dodpfxezy Svus Alfekw Spindle power kW (S1/S6): 7,5 / 5,5 Spindle torque Nm: 200 Spindle taper / interface: BT 45 Gearbox stages / speed ranges rpm: 2 COOLING Coolant through spindle bar: 15 EQUIPMENT & OPTIONS • Box guideways (flat slideways) — very rigid, stable machine • 4-axis simultaneous: Kitagawa 4th-axis rotary unit, hydraulically clamped, fully integrated in the control • Spindle with 2 mechanical gear stages — high torque, 200 Nm in low gear • Through-spindle coolant (IKZ) retrofitted by Deuschle: rotary union through the pull stud, hydraulic clamping/release with pressure intensifier, own 15 bar pump switched via M50 • Chip conveyor at the front, discharging to the right • Approx. 75 BT 45 tool holders included, all with through-coolant passage, plus about 20 pull studs • 4th axis (rotary table)

Condition: ready for operation (used), Year of construction: 1986, travel distance X-axis: 160 mm, travel distance Z-axis: 560 mm, controller manufacturer: FANUC, number of axes: 2, Turn-mill centre manufactured in 1986. This MORI SEIKI SL 3 features a maximum swing over bed of approximately 570 mm and a turning length of around 610 mm. It includes a spindle speed range of 30 to 3500 rpm and a turret with 8 to 12 stations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL 3 machine we have for sale. Contact us for further details. - Max. Swing Over Bed: Approx. 570 mm (22.4 in)- Max. Turning / Machining Length: Approx. 550 - 610 mm (21.6 - 24 in)- Distance Between Centers: Approx. 610 mm (24 in)- Spindle Bore Diameter: Approx. 52 - 56 mm (2.05 - 2.2 in)- Spindle Inside Taper: MT6- Spindle Speed Range: Approx. 30 - 3500 rpm- Spindle Drive Motor: Approx. 11 / 15 kW (15 - 20 HP)- Main Chuck: 3-jaw power chuck- Turret Stations: 8 - 12 stations (Static turning/boring only)- Driven Tools / Live Tooling: No- Sub-Spindle / Counter Spindle: No (Single main spindle with tailstock)- Bed Incline: 45° slant bed design- Power Consumption: Approx. 33 kVA- Machine Weight: Approx. 4200 kg Technical Specification Counter Spindle No Driven Tools No Dsdpfo Aif Nrjx Alfekw

Condition: used, Year of construction: 1988, functionality: fully functional, turning diameter ca. 570 mm turning length ca. 530-610 mm control FANUC Dedpfx Aloyiu Tpjfjkw ohne Gewähr x-travel ca 160-200 mm y-travel ca. 560 mm weight of the machine ca. 4,5 - 5 t ca 10 oder 12 spindle bore 52-76 mm weight of the machine ca. 4 t

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, total height: 2,935 mm, total width: 5,500 mm, table width: 1,100 mm, table length: 560 mm, table load: 800 kg, overall weight: 5,400 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 4,800 mm, number of axes: 3, This 3-axis DMG Mori Seiki CMX 800 V was manufactured in 2017. It features a travel range of 800 mm in the X-axis, 560 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a robust table size of 1,100 x 560 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG Mori Seiki CMX 800 V vertical machining centre. Contact us for further details. - CNC Control: HEIDENHAIN TNC 620 (SLIMline Control Panel / MC 7420D PC & Screen + TE 715D Keyboard)- Table Clamping Surface: 1,100 x 560 mm- Max Table Load (Center): 800 kg- Table Loading Height (Floor to top edge): 850 mm- T-Slots: 4 / 18H12 (Distance between slots: 100 mm; 1 reference slot: 18H7)- Spindle Speed Range: 20 – 12,000 rpm- Spindle Drive Power (40% ED / 100% ED): 13 kW / 9 kW- Spindle Torque (40% ED / 100% ED): 82 Nm / 54 Nm- Tool Taper / Interface: SK40 (DIN 69871 / DIN 69872 Form A/B pull stud)- Tool Clamping Force: 10 kN (SK40 / BT40)- Tool Magazine Capacity: 30 pockets (chain type)- Max Tool Diameter (with adjacent tools): 80 mm- Max Tool Diameter (with free adjacent pockets): 125 mm- Max Tool Length (from spindle nose): 300 mm- Max Tool Weight (Automatic tool change): 8 kg- Max Total Magazine Load: 240 kg- Feed Drives: AC Servomotors on X, Y, and Z axes- Rapid Traverse Rate (X / Y / Z): 30 / 30 / 30 m/min- Feed Speed Range (X, Y, Z): up to 20,000 mm/min- Position Measurement Resolution: 1 µm- Positioning Uncertainty P (VDI/DGQ 3441): 6 µm- Chip Management: Integrated scraper conveyor (bande grattante, 220 L coolant tank, 20 L/min pump at 5 bar)- External Coolant & Air Supply: External adjustable coolant nozzles and blow air (M25)- Internal Cleaning: Work area rinsing / flushing gun (pistolet de rinçage)- Manual Axis Movement: Electronic handwheel (HR 510FS)- Access / Safety Authorization: DMG MORI SMARTkey electronic mode selector- Apparent Power: 32 kVA- Rated Supply Voltage: 400 V AC ±10% (3/N/PE)- Mains Frequency: 50/60 Hz- Control Voltage: 230 V AC / 24 V DC- Full Load Current (In max): 52 A- Main Fuse: 63 A- Short Circuit Breaking Capacity (Ics): 0.63 kA- Basic Machine Weight: approx. 5,400 kg- Chip Conveyor Weight: 500 kg Dksdpfo Agb E Rex Alfew Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 300 kg, spindle speed (max.): 12,000 rpm, The machine spindle was recently replaced. The corresponding report can be provided upon request. TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 40 m/min Table width: 500 mm Table height: 870 mm Table length: 500 mm Table load capacity: 300 kg Rotary table diameter: 500 mm Rotational speed (max.): 1,200 rpm Spindle speed (max.): 12,000 rpm Spindle interface: HSK-A63 Workpiece height (max.): 450 mm Workpiece weight (max.): 300 kg Tool length: 300 mm Tool diameter: 125 mm Tool weight: 8,000 g Number of tool magazine slots: 180 MACHINE DETAILS Control unit: Siemens 840 D Total weight: 14,800 kg Incoming voltage: 400 V EQUIPMENT Mori Seiki tool application manual KNOLL FKA/500 band filter system + 3 filter rolls Filtermist FX5000 emulsion extraction unit Dkjdpoy N N Suofx Alfjw Renishaw OMP60 3D probe Chip conveyor Spindle chiller Documentation + circuit diagrams

Condition: used, Year of construction: 1995, Fanuc MSC 516 2 pallets, 500x500mm BT40 spindle Spindle speed: 12,000 RPM 120-tool changer Coolant pressure: 20 bar Renishaw 3 additional pallets Dkjdezgrzkspfx Alfew Chip conveyor

Condition: excellent (used), Mori Seiki ZT 1500 YB lathe, year: 2006, including 5 driven tools Dkedpjyyl Itsfx Alfsw

Condition: excellent (used), 2 axis cnc Mori Seiki TL-40 lathe year 1998 MSD-518 II Fanuc control X-axis-240mm Z-axis-2950mm 20-2000tm spindle 91mm bar capacity 10-station turret 440mm maximum machining diameter 6805mm x2520mm diameter 10t weight Dkjdpfx Aljuaqadefsw

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, MORI SEIKI HORIZONTAL CNC LATHE Model : NL2500Y/700 Year 2006 Max Swing Over Bed 925 mm Max Turning Diameter 356 mm Max Turning Length 705 mm Distance Between Centers 700 mm Bar Working Capacity 80 mm Standard Chuck Size 10” Dkedpfxo Ad Ubxe Alfsw • X-Axis Travel: 260 mm • Z-Axis Travel: 795 mm • Y-Axis Travel: 100 mm / ± 50 mm • C-Axis Minimum Indexing: 0.001° • Main Spindle Speed: Max 4,000 RPM • Turret Stations: 12-position bolt-on type BMT turret • Live Tooling Speed: Max 6,000 RPM • Live Tooling Motor: 7.5 hp (5.5 kW) • CNC Control Unit: MSX-850 / MSX-850III (MAPPS III) • Tailstock

Condition: ready for operation (used), Year of construction: 2006, This 4-axis MORI SEIKI NV-5000α1/40 was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,100 × 600 mm with a maximum table load capacity of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NV-5000α1/40 vertical machining centre we have for sale. Contact us for further details. Dksdpey Uxaxsfx Alfsw