Used Mori Seiki Nzx 1500 for sale (177)

Condition: good (used), Year of construction: 2007, CNC Turning and Milling Center Machine type: Mori Seiki NZ-S 1500 / 1000 Control: Fanuc MSC-701 Year of manufacture: 2007 TECHNICAL DATA: Max. turning length: 1,055 mm Turning diameter: 120 mm Max. swing over bed: 285 mm Rapid traverse (X/Z): 20 m/min Main spindle Max. speed: 3,500 rpm Drive power: 7.5 / 5.5 kW Bar capacity: 43 mm Spindle nose: A2-6 Number of turrets: 2 Tool stations: 6 + 6 Isdpfewxahfox Adnsa Tool interface: Capto Tailstock Quill diameter: 85 mm Quill taper: MK 4 Quill stroke: 70 mm Tailstock traverse: 520 mm Steady rest: hydraulic Steady rest: SMW SLU-1-Z Equipment features: Chip conveyor Coolant pump Tool measurement system

Condition: good (used), Year of construction: 2008, Parts shown by hand not come. Isdpfjxhg Eyox Adnoa

Condition: used, Year of construction: 2008, turning diameter max. 320 mm turning length 810 mm control MSX 701 MAPPS III standard turning dia. 200 mm Main spindle: Number of revolutions max. 6.000 min/-1 power capacity - main spindel 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Subspindel: Number of revolutions max. 6.000 min/-1 power capacity - Sub spindle 22 / 18,5 kW Bar feed max. 52 mm spindle bore 61 mm C-Axis 0,001 ° Turret 1 + 3: number of toolpositions je 16 pos. Number of driven toolspositions je 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+65 / -45) mm Turret 2: number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 (+45 / -65) mm axis stroke: x-travel 1-3: 210 mm y-travel 1-3: 110 mm z-travel 1+3: 300 / 2: 810 mm total power requirement 90 kVA weight of the machine ca. 9,3 t dimensions of the machine ca. 4,5 x 3,0 x 2,5 m CNC - Turning- and MillingCenter Isdpfstqmqwjx Adnea MORI SEIKI - NZ 1500 T3Y3 - Main- and Subspindle - 3 turrets, 2x upper / 1x below - 3x Y-Axis - 3x 16-pos. tool-drive - incl. 28x collets - incl. Hainbuch changing device

Condition: used, Year of construction: 2006, functionality: fully functional, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 56 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 460 mm, rapid traverse Z-axis: 80 m/min, rotational speed (max.): 12,000 rpm, overall weight: 10,500 kg, fuel: electricity, number of slots in tool magazine: 40, Mori Seiki MT 1500 SX 9-axis milling and turning center, manufactured in 2006, with Fanuc Series 18iB (MSX-501) control, maximum chuck length of 920mm, maximum diameter of 400mm, bore size of 56mm, 4000 and 6000 rpm spindle rotation, and 12,000 rpm milling spindle. 12-position turret with live tools, Y axis, B axis +/- 120, C axis 0.001, ATC 40 tools, and chip extractor. In excellent working condition and can be seen working in Portugal. Ijdsh Elp Ejpfx Adnoa

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,000 h, functionality: fully functional, turning length: 750 mm, turning diameter over cross slide: 250 mm, travel distance X-axis: 140 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Axis Travel X-axis travel: 140 mm Y-axis travel: +/- 40 mm Z-axis travel (1+2): 450 / 410 mm Turning Capacity Turning length: 750 mm Swing diameter over cross slide: 250 mm Turning diameter: 190 mm Distance between centers: 750 mm Maximum bar diameter: 52 mm Spindle Spindle speed (max.): 4,000 rpm Spindle bore: 91 mm Ijdjxgglkopfx Adnja Spindle bearing diameter: 95 mm Main spindle speed range: 60 - 6,000 rpm Main spindle drive power: 22 / 18.5 kW Maximum torque: 198 Nm Sub-spindle (B-axis) travel: 525 mm Feeds Feed rate X (1+2): 18,000 mm/min Feed rate Y: 6,000 mm/min Feed rate Z (1+2): 24,000 mm/min Feed rate B: 24,000 mm/min Turret Number of turrets: 2 Number of tool stations: 2 x 16 positions Square shank height: 20 mm Drill shank diameter: 25 mm Turret indexing time: 0.2 s Toolholder: VDI 30 Speed range - driven tool stations (max.): 6,000 rpm Drive power - driven tool stations: 5.5 / 3.7 / 2.2 kW Rapid Traverse Rapid traverse X (1+2): 18 m/min Rapid traverse Y: 6 m/min Rapid traverse Z (1+2): 24 m/min Rapid traverse B: 24 m/min Rapid traverse C: 400 rpm MACHINE DETAILS Control: MSX 501 Dimensions & Weight Dimensions: 6500 x 3000 x 2500 mm Machine weight: approx. 5.1 t Total power requirement: 73.9 kVA Operating hours: 5,000 h EQUIPMENT LNS bar feeder

Condition: used, Year of construction: 2020, Technical details: turning diameter: 670 mm Iedpswl Ag Dofx Adnea turning length: 1540 mm control: F31iB5 Celos Fanuc 35iB5 swing diameter max. over bed cover: 700 mm Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm Rotation B-axis: -30° / +210° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 20,2/18,8 kW Torque of milling spindle: 120 / 44 Nm tool taper milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool/tool, milling spindle: 1,25 s Spindle 1 RPM: 3000 1/min Spindle 1 Power: 36 / 30 / 25 kW C-axis spindle 1: 0,001 ° Bar capacity spindle 1: 102 mm Spindle 2 RPM: 4000 1/min Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0,001 ° Bar capacity spindle 2: 80 mm dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m Linear scales on axis: X, Y programmable steady: KLU-A530 & SLU-X3.2 Accerories Chip conveyor tool setting spindle load monitor Airblow system Airblow system internal to cutting tool Spindle 1 Chuck Kitagawa 250 (B 210) mm Spindle 2 Chuck Kitagawa 250 (B 210) mm Interface for coolant through the spindle 70 bar Tailstock specification for spindle 2 Measuring probe for work piece Renishaw OMP60 pendant hand wheel Parts and total counter Signal lamp 3 colors Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear window Quick fixed cycles Program restart Signal lamp 4 colours Ethernet I/P Interface manual tool eye Automatic door Air Filter Oil skimmer Tactile sensor for workpiece measuring Airblow system external Subspindel Spindle 1 coolant jet Spindle 2 coolant jet Coolant Gun Coolant through spindle 70 bar with filter Knoll High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock. It has automatic door and Matris robot R-2000iC/165F. *

Condition: used, Year of construction: 2010, turning diameter max. 320 mm turning length 810 mm control MSX 701 Number of revolutions max. 6.000 U/min power capacity - main spindel 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm Number of revolutions max. 6.000 U/min power capacity - Sub spindle 22 / 18 kW max. usable bar diameter 52 mm C-Axis 0,001 ° spindle nose JIS A2-5 collet chuck 140 mm number of toolpositions 16 pos. Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW Y - Axis 110 mm number of toolpositions 16 pos. Ijdpfx Adev E R E Aonsa Number of driven toolspositions 16 pos. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 7,5 / 5,5 kW x-travel 1/2: 210 mm y-travel 110 mm z-travel 1/2: 810 mm b-axis 900 mm total power requirement 86 kVA weight of the machine ca. 8,1 t dimensions of the machine ca. 8,0 x 3,5 x 2,8 m CNC - Turning- and MillingCenter MORI SEIKI - NZ 1500 T2Y - Main- and Subspindle - 2 turrets, up and below - Y-Axis - 2x 16 driven tool positions

Condition: excellent (used), Year of construction: 2006, operating hours: 7,562 h, turning length: 515 mm, turning diameter: 366 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 590 mm, rotational speed (max.): 6,000 rpm, total height: 2,120 mm, total length: 2,705 mm, total width: 2,000 mm, overall weight: 5,500 kg, CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Ijdou T H Dxopfx Adnsa Chuck foot switch (double) for main and counter spindle Interface for Bar feeder Bar loader IEMCA MASTER 880/MP 33 LL Working time hours Potencial nominal kVA: 27.4 Basic machine dimensions / weight Length mm: 2.705 Width mm: 2.000 Height mm: 2.120 Weight kg: 5.500

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,000 h, Control Unit Brand FANUC Model MSX-701 IV This MORI SEIKI NZ1500 was manufactured in 2010. It features an MSX-701 IV control system, dual spindles with a maximum speed of 6000 rpm, and two turrets with capacities of 16 positions each. The machine includes a bar feeder for materials up to 1200 mm and a high-pressure coolant system with a 500-liter tank. Consider the opportunity to buy this MORI SEIKI NZ1500 turn-mill centre. Contact us for more information about this machine. Iedpfsxtgl Rsx Adnoa Application Types Turning

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 52 [mm] Isdpeuhb Tdofx Adnja - Max. turning diameter : 350 [mm] - Max. diameter on bench : 923 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260/590 [mm] TAILSTOCK - Tailstock type : Numérique - Tailstock stroke : 564 [mm] - Distance between centers : 694 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 19 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2460 x 2000 [mm] - Machine height : 2185 [mm] - Machine weight : 5300 [kg] EQUIPMENT - CNC : MORI MSX-850 III (Mitsubishi) - Coolant tank - Chips conveyor - Spindle cooling unit - Tool probe - Electric transformer

Condition: used, Year of construction: 2007, Swing over bed 923,8 mm Swing over cross slide 755 mm Ijdpjvwgkrofx Adnea max. turning diameter 356 mm Max. Turning length 515 mm control MSX-850 III travel -x axis 260 mm travel -y axis -50, +50 mm travel -z axis 590 mm travel - z axis (spindle 2) 624 mm driven tools turning speeds 6.000 U/min CNC Turning- and Milling Center | MORI SEIKI - NL1500SY / 500 equipped with main/counter spindle, b- + y- axis, a turret for driven tools and chip conveyor and loading and unloading system (alphaMAX). The machine has only 3.400h processing time hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: NL1500SY500 | NL 1500 SY / 500 | NL-1500SY / 500 | NL-1500 SY / 500

Condition: ready for operation (used), Year of construction: 2009, operating hours: 17,691 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, TECHNICAL DETAILS Travel Paths & Axes Ijdpfxexvzt Io Adnsa Travel path X-axis: 560 mm Travel path Y-axis: 560 mm Travel path Z-axis: 630 mm B-axis max. rotational speed: 44.4 rpm Rapid Traverse Rapid traverse X-axis: 50 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Workpiece Dimensions Max. workpiece height: 900 mm Max. workpiece diameter: 630 mm Max. workpiece weight: 400 kg Spindle & Tools Max. spindle speed: 14,000 rpm Distance spindle center to top of pallet: 80–640 mm Distance spindle nose to center of pallet: 100–730 mm Tool magazine: 60 positions Tool change time: 0.9 s Tool holder: BT 40 Pallets Pallet dimensions: 400 x 400 mm Number of pallets: 2 Pallet change time: 6 s Feed Feed rate X-axis: 50,000 mm/min Feed rate Y-axis: 50,000 mm/min Feed rate Z-axis: 50,000 mm/min Work Table Table width: 400 mm Table length: 400 mm Table load capacity: 400 kg MACHINE DETAILS Control model: MSX-701IV Power consumption: 32.8 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,400 x 2,600 mm Total weight: 9,800 kg Operating Hours Power-on hours: 46,259 h Operating hours: 26,725 h Machining hours: 17,691 h

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: NL201FC1175, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, controller model: MSX-850 III CONTROL, The machine has only been used for plastics! TECHNICAL DETAILS Travel X-axis: 260 mm Travel Y-axis: 100 mm (+/- 50 mm) Travel Z-axis: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Number of driven tools: 3 Tool turret: 16-position Bar capacity: 65 mm Axes: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg Isdpfxjxyidpe Adnoa EQUIPMENT Parts catcher chuck Driven tools Tailstock Parts catcher Tool setting probe Dust extraction system

Condition: good (used), Year of construction: 2001, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, controller manufacturer: MORI SEIKI, controller model: MSX 501 III, CONTROLS .. CNC controls MORI SEIKI MSX 501 III WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 800 mm .. Y-axis travel: 510 mm .. Z-axis travel: 460 mm TABLE .. table surface (left-right): 1320 mm .. table surface (front-back): 600 mm SPINDLE / HEAD .. spindle revolutions (max): 10000 /min .. tool fixture: ISO BT 40 TOOL MAGAZINE .. number of positions: 30 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2400 mm Iodpfx Adox Acv Ronea .. space requirements -front/back-: 2600 mm .. total height: 2800 mm .. total weight approx.: 6800 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: yes .. closed cabin: yes

Condition: used, Year of construction: 2000, turning diameter 280 mm turning length 960 mm Iodsxz Scqopfx Adnja control MORI SEIKI MSX -501 III weight of the machine ca. 13,5 t

Condition: used, Year of construction: 1995, Technical details: turning diameter: 340 mm turning length: 530 mm control: MSD 516 TB 2 Dialog swing dia.: 520/350 mm rapid power traverse in X-and Z direction: 12/15 m/min chucking diameter: Kitagawa B 210 (250 mm) bar material dia.: 65 mm Ijdpfx Adexz Ehtensa spindle drive: 18,5 / 15 kW spindle speed:: 35-3500 1/min max. torque on the spindle: 490 spindle nose: JIS A2-6 turret stations / rotary tool stations: 12/6 RPM of rotary tools: 80-2000 1/min tailstock quill taper MT: MK5 tailstock quill stroke: 110 mm tailstock quill diameter: 100 mm Tailstock Travel: 491 mm total power requirement: 40 kVA weight of the machine ca.: 4,4 t dimensions of the machine ca.: 4x1,7 m Accerories Chip conveyor manual tool eye Very solid CNC turning center. Machine is in good condition. Several tool holders, static and rotary come with the machine. *

Condition: used, Year of construction: 2012, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV Iodpfsxzk H Uex Adnsa greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 4,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NLX 2500 SY / 700

Condition: good (used), Year of construction: 1990, CNC Machining Center Manufacturer: MORI SEIKI Model: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel paths X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse: 24 m/min Feed rate up to 5 m/min Spindle: Ball screw spindle: 36 mm diameter Feed drives: FANUC AC, X/Y-axis model 5, Z-axis model 10 Main spindle speed: 100 – 6,000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: +/- 2 seconds Repeatability: +/- 1 second Pallet clamping force: 3,400 kg Max. workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 sec Collet clamp time: 7 sec Max. tool diameter: 110 mm Max. tool length: 250 mm Max. tool weight: 8 kg Special accessories: End-of-work indicator with signal light Magazine for 30 tools Operating hours display Tool life monitoring Isdpfxet Rg E Ss Adnea Coolant system Work area lighting Weight: approx. 4,500 kg Space requirement: 1,900 x 2,300 mm

Condition: like new (used), Year of construction: 2008, operating hours: 1,900 h, functionality: fully functional, * Mori Seiki NL 2500 SY. * Included equipment value: €20,000–25,000. * Year of manufacture: 2008. * Only 1,900 cutting hours. * 5-axis machine. * Sub-spindle. * 12-station turret, all stations powered (live tooling). * Y-axis travel: ±60 mm. * C-axis on both spindles. * Main spindle integrated motor: 18 kW. * Sub-spindle integrated motor: 15 kW. * Direct drive for live tools: 5.5 kW. * Spindle start-up torque: 640 Nm. * Beltless, step-less drive motors. * Main spindle nose size: A2-8. * Sub-spindle nose size: A2-6. * Bar capacity: 80 mm. * Main spindle chuck: Kitagawa B-210, 250 mm, metric system. * Sub-spindle chuck: Kitagawa B-208, 210 mm, metric system. * Box guideways on all axes. * Main spindle speed: 4,000 rpm. * Live tool speed: 6,000 rpm. * Daikin oil chiller for both spindles. * Conversational automatic programming system: Mapps 4. * Automatic overload control and tool consumption monitoring. * Rapid traverse speed: 30 m/min on X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw automatic tool measurement arms. * Communication ports: USB, PCMCIA card, and RS-232. Iedpfx Adex Ab R Tonja * Bar feeder installation interface. * Automatic parts catcher. * Dual foot pedal for independent opening and closing of main and sub-spindle chucks. * Side-mounted hinged belt chip conveyor. * Comprehensive set of static and powered toolholders. * Electrical transformer. * Documentation: parts list, electrical diagrams, programming, and operations manual included. * Machine weight: 5,800 kg. * Machine currently in operation. * Essential to check precision and demonstration videos. * Only aluminum components machined. * Cutting hours: 1,900. * Immediate delivery unless sold beforehand.

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Mori Seiki Machining Center Isdpfx Adoxy Afgonoa 4 Axes Type SH-403 Year 2002 3-phase With Documentation With Chip Conveyor

Condition: used, Year of construction: 2000, functionality: fully functional, CNC Lathe Mori Seiki ZT 2500 Y Year of manufacture: 10/2000 Control: MORI SEIKI MSX-501 III Ijdpfx Adexz Hnnjnoa Simultaneous machining on 2 surfaces with 2 spindles and turrets. Double-sided machining Large number of tools included. For further technical details, see images.

Condition: used, Year of construction: 2002, Technical details: x-travel: 560 mm y-travel: 510 mm Isdpfxexz D Raj Adnja z-travel: 510 mm control: Fanuc MSX 501 MAPPS III spindle drive: 22 kW spindle speeds: 12000 U/min rapid travel x/y/z: 42 mm/min Number of tool station: 40 BT40 max. tool weight: 12 kg tool changing time: 1,3 sec Pallet dimension: 2x 400x400 mm table load: 0,5 t working diameter: max. 610 mm total power requirement: 56 kVA weight of the machine ca.: 8,7 t dimensions of the machine ca.: 2,9x4,1 m Accerories Chip conveyor Coolant through spindle 70 bar with filter Table probe for tool breakage and length measuring Tactile sensor for workpiece measuring Air Filter

Condition: used, Year of construction: 1986, Technical details: x-travel: 800 mm y-travel: 460 mm z-travel: 510 mm total power requirement: 20 kW weight of the machine ca.: 8 t Vertical Processing Centre 20kW is the nominal value. The spindle only needs 7.5kW. It looks like 15kW will be enough. Iedpfowvblasx Adnja *

Condition: used, MORI SEIKI NH 4000 DCG is a Horizontal machining center by MORI SEIKI designed to deliver precision, high accuracy and operational reliability. Working capacities (travels, diameters, workpiece lengths) are not provided. Main technical specifications (spindle speeds, feed rates, power supply, dimensions, weight) are not provided. Accessory and equipment details are not specified. Built to achieve tight tolerances, suitable for automotive, aerospace, medical, watchmaking and machine tool applications Iedpjxykrbjfx Adnoa

Condition: like new (used), Year of construction: 2009, operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NZ 2000 T2Y. * APPROXIMATE VALUE OF INCLUDED EQUIPMENT: €40,000–45,000. * Both spindles equipped with two Hainbuch high-precision collet chucks. * Opposed-spindle machine configuration. * 9-axis turning and milling center with CNC control. * Twin spindles. * Spindle size: A2-6. * 2 stacked turrets. * 2 C-axes. * 1 Y-axis. * Two integrated 22 kW motors. * Milling spindle power: 7.5 kW. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic load control and tool consumption monitoring. * Tool life management and consumption monitoring. * Double foot pedal for chuck open/close operation. * Oil chiller for both spindles. * Cutting torque: 340 Nm. * Both turrets feature 16 stations each, all stations driven. * Possibility to set up with up to 32 tools per turret. * Interface for bar feeder installation. * Rear automatic parts catcher with special gripper for long workpieces. * Large set of external and internal toolholders. * Large assortment of axial and radial driven tool blocks. * MQ tool clamping system. * Maximum turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III CNC control. * Maximum distance between main and sub-spindle: 1,130 mm. * Main spindle speed: 5,000 rpm. * Sub-spindle speed: 5,000 rpm. * Driven tool speed: 6,000 rpm. * Maximum bar capacity: 65 mm. * X1 travel: 210 mm. Isdpfxex Ab Nie Adnja * Y1 travel: +65 / -45 mm. * Z1 travel: 300 mm. * X2 travel: 210 mm. * Z2 travel: 810 mm. * Sub-spindle travel: 920 mm. * Rapid traverse X1, X2: 30,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 50,000 mm/min. * C-axis resolution: 0.001°. * Hinged belt side chip conveyor. * Communication ports: USB, PCMCIA card, RS232. * Machine weight: 8,300 kg. * Inspections under power possible. * Supplied with electrical transformer, documentation, parts list, electrical diagrams, programming and operation manuals. * IMPORTANT: Never used with bar feeder; only used for machining aluminum prototypes. * VERY few cutting hours. * Immediate delivery unless sold prior.