Used Metal Working Lathe for sale (60,584)

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Isdpfx Aeyaaavoh Neal Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 850 mm, travel distance Z-axis: 550 mm, spindle motor power: 1,200 W, spindle speed (max.): 4,000 rpm, controller manufacturer: SIEMENS, controller model: Sinumerik 810 D, number of axes: 2, This IRLE Facing Lathe was manufactured in 1998. Ideal for vertical turning applications, this machine offers robust construction and reliable performance. Consider the opportunity to buy this IRLE Facing Lathe vertical turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits Isdpfsx D D Hajx Ah Njal • Delivery rate: 3. 7 l/min • Operating pressure: 115 bar • Hydraulic unit for disk brake motor power: 0. 55 kw • Delivery rate: 0. 5 l/min • Suction height: 500 mm • Rated power: 70 watts • Operating voltage: 230/400 volt Extra Information Max. torque in S1 operation: 5700 Nm Max. torque in S6 operation: 7100 Nm Max. achievable cutting force: Approx. 3000 N Movement: Headstock Faceplate diameter: 3000 mm Speed range of the faceplate: 2 - 20 - 80 min-1 Undersupport Feed speed: - 100 mm/min Max. torque (three-phase servo motor): 1 Nm Top Support Feed speed: mm/min Motor speed: 0 - 3000 min-1 Max. torque (servo motor): 1 NmLathe can be viewed under power. The machine has a CE mark and is suitable for machining plastics, wood and aluminium. It has a turning diameter of 30,000 mm to zero with the upper slide in place. Other data according to the data sheet.

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Iaedpfx Ajtzyx Toh Nsl Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: used, Year of construction: 2011, machine/vehicle number: 902881, Weights Empty weight: 6.700 kg Iodpfxjxhb Uie Ah Njal Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.500 cm Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Solideal Max. horizontal reach: 760 m Transport dimensions (LxWxH): 5.95x1.75x1.96 Additional information Please contact PFEIFER GROUP for more information

Condition: new, The Turnado 230/1500 PRO is a high-performance Conventional Horizontal Lathe from KNUTH, designed for precision and efficiency in your machining tasks. This Engine Lathe represents the latest generation of universal lathes, boasting features developed and refined over 20 years. With its new apron design and ergonomic frame, users can enjoy improved comfort and productivity. The machine's robust construction includes a heavily ribbed machine bed and a rigid headstock, providing a solid base for machining operations. Key features such as an infinitely variable speed range, rapid feed motor, and a constant cutting speed ensure excellent surface quality and time efficiency. The Turnado 230/1500 PRO is equipped with essential standard equipment, including a 3-axis position indicator and a powerful main spindle drive that guarantees high torque and adaptability to various workpiece sizes. To enhance reliability, all guides are adjustable, and a central lubrication system simplifies maintenance. Explore the versatility of the Turnado 230/1500 PRO Engine Lathe, and discover how it can elevate your machining capabilities. Request a quote today to learn more about this exceptional Conventional Horizontal Lathe and how it can benefit your workshop. Isdpfxsuy Id Nj Ah Neal

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Double spindle CNC lathe with 2 spindles, 3 turrets and 3 Y axes each turret with 15 stations, BMT 44 Ijdpfxsvxu Eaj Ah Neal driven tool holder 2x C-axis 3x Y axis Fanuc 32i -TB control Bar passage 65 mm Left spindle 15/11 KW, Hainbuch Spanntop mini Axle pull size 65 Right spindle 11/7.5 KW, Kitagawa three-jaw chuck Finished part gripper Conveyor belt Bar loader interface Coolant system, separate tank 200 l Cooling unit High pressure on turrets 1-3 via M function 15 bar/40 l/min 2x Brinkmann pump Renishaw tool measurement for all turrets Tool monitoring for spindle and AGW Spindle flushing through the counter spindle IKZ, Deublin Rotary distributor Hinged belt conveyor Transformer available immediately

Condition: used, Year of construction: 2001, functionality: fully functional, Control: GE FANUC Series 18i-T Travel range X-axis: 570 mm Working stroke X-axis: 250 mm Travel range Z-axis: 200 mm Swivel diameter: 260 mm Max. turning diameter: 220 mm Max. workpiece length: 100 mm FORKARDT 3QLC 250-72 Z8 S12 power chuck Max. spindle speed: 4,500 rpm Main drive power, 100/40% duty cycle: 15/22 kW Iaodpfx Ajyaaaish Nel Torque 100/40% duty cycle: 202/303 Nm Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Standard automation with 12 - 18 pallets Tool carrier with driven tools, 12 stations Max. speed of driven tools: 6,000 rpm Includes various driven tools and chip conveyor Dimensions without chip conveyor (LxWxH), approx.: 2,720 x 1,500 x 2,400 mm Weight approx.: 6,500 kg

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm turning length 750 mm control HEIDENHAIN ManualPlus total power requirement 9 kW Ijdpfox U Encsx Ah Neal weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m

Condition: good (used), Year of construction: 1979, Center height: 120 mm Center width: 450 mm spindle opening/boring: 23 mm board width: 100 mm Iaodpfsip Nczox Ah Nsl Speeds: (12) 180 - 2240 min-1 travel top slide: 140 mm tailstock mount: MK 2 quill stroke: 80 mm motor power: 2,5 kW connection: 400 V dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Punching device quick change holder system Multifix, size Aa Machine light Coolant device

Condition: used, Year of construction: 2012, machine/vehicle number: 16154.1125, Empty weight: 8.610 kg Lifting capacity: 750 kg Working height: 1.500 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: - Transport dimensions (LxWxH): 4.2x1.93x3.24 Please contact PFEIFER GROUP for more information Iaodjx U Rgqjpfx Ah Nel

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Iaedpotvb Iusfx Ah Nol Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning height: 1,700 mm, workpiece weight (max.): 10,000 kg, turning diameter over cross slide: 2,040 mm, turning diameter: 2,000 mm, feed length X-axis: 2,000 mm, feed length Z-axis: 1,661 mm, faceplate diameter: 1,600 mm, feed rate Z-axis: 3 m/min, total height: 6,177 mm, total width: 5,638 mm, total length: 3,937 mm, rapid traverse X-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, type of input current: AC, rotational speed (max.): 258 rpm, rotational speed (min.): 1 rpm, torque: 16,070 Nm, table load: 10,000 kg, table diameter: 1,600 mm, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, - CNC unit (FANUC 32i-A) - Automatic tool exchange unit (ATC) Use Pot quantities (18 Pot) For the linear cutting Standard tool holder Tool holder for the linear cutting - Chuck Isdoulk D Iepfx Ah Njal - Cutting oil Tank - Air Gun unit - Tool & Bed washing unit - Splash guard (Splash guard) - Hydraulic unit - Axis Slide Cover - Working lamp - warning lamp - Ladder and Hand Rail - Tool box for the standard maintenance - Manual MPG - Chip Conveyer

Condition: used, Year of construction: 2001, functionality: fully functional, Control: GE FANUC Series 18i-T Travel range X-axis: 570 mm Working stroke X-axis: 250 mm Travel range Z-axis: 200 mm Swivel diameter: 260 mm Max. turning diameter: 220 mm Max. workpiece length: 100 mm FORCARDT 3QLC 250-72 Z8 S12 power chuck Max. spindle speed: 4,500 rpm Iedsyaaacjpfx Ah Neal Main drive power, 100/40% duty cycle: 15/22 kW Torque 100/40% duty cycle: 202/303 Nm Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Standard automation with 12 - 18 pallets Tool carrier with driven tools, 12 stations Max. speed of driven tools: 6,000 rpm Includes various driven tools and chip conveyor Dimensions without chip conveyor (LxWxH), approx.: 2,720 x 1,500 x 2,400 mm Weight approx.: 6,500 kg

Condition: as good as new (ex-display), SHOWROOM MACHINE We are selling our as-new Drechselmeister MIDI 1 wood lathe with a distance between centers of 400 mm. The showroom machine is in original condition, so you receive the full warranty. Technical Specifications: - Center height approx. 178 mm / Maximum turning diameter 355 mm - Distance between centers approx. 400 mm (can be extended with optional bed extensions) - 3 belt speeds / Infinitely variable speed regulation: 80 – 800 / 170 – 1,700 / 350 – 3,700 rpm - Spindle thread M33 x 3.5 (taper MK2) with ASR (Euro) anti-vibration profile* - Tailstock with MK2 quill (50 mm travel with scale!) - Motor 0.7 kW / 1 HP (230 V) with frequency inverter - Weight approx. 43 kg Isdpfx Ahstpn Nle Noal The machine is located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! Shipping by freight forwarder: Austria: €50.00 incl. VAT Germany: €60.00 incl. VAT South Tyrol: €80.00 incl. VAT If you are interested in this machine, please provide your full address details in the contact form so we can process your enquiry professionally! Thank you, your NEUREITER team Related terms: woodturning machine, lathe, turning lathe, wood lathe, woodturning, turning tools, wood turning, turning machine Reference: R-A0117

Condition: used, Year of construction: 2007, Technical data: Isdpfxjrwlwvo Ah Neal Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm

Condition: used, Year of construction: 2012, machine/vehicle number: 16154.1124, Empty weight: 8.610 kg Lifting capacity: 750 kg Working height: 1.500 cm Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Iasdpfex U Rgdox Ah Njl Tyre brand: - Transport dimensions (LxWxH): 4.2x1.93x3.24 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1988, turning diameter 570 mm turning length 2000 mm control ja Iaedpfx Ajx U A Utsh Nol weight of the machine ca. 3,5 t

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool Iasdpfx Ahewwkx Ej Nsl  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: used, Year of construction: 2004, operating hours: 3,412 h, machine/vehicle number: CD 106024, fuel type: diesel, Empty weight: 5.510 kg Lifting capacity: 700 kg Working height: 1.200 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Iodpfx Ahsx U Rftj Noal Tyre brand: - Transport dimensions (LxWxH): 4.18x2.25x1.71 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1986, serial number 7175455 3 Backenfutter Durchm. 30 tool taper ja turret head für 6-fach-Belegung Iajdpfjx U A Tcsx Ah Nol centre distance ca. 700 mm turning diameter max. ca. 450 mm Control FANUC dimensions of the machine ca. 3.000 x 2.000 x 2.200 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 320 mm, spindle speed (min.): 8,000 rpm, bar passage: 32 mm, Machining Data Maximum bar capacity: 32 mm Maximum turning length: 320 mm Maximum drill diameter (front): 12 mm Maximum tapping size (front): M12 Isdpfx Ajxb R R Hsh Neal Main spindle speed: up to 8,000 rpm Sub spindle speed: up to 8,000 rpm Number of tools: 25 to 27 Dimensions & Weight Dimensions (W x D x H): 2,860 mm x 1,465 mm x 1,900 mm Weight: 4,300 kg 10-position turret Rotating tools for complex machining operations FMB Turbo 3-36

Condition: used, Year of construction: 2007, operating hours: 3,901 h, machine/vehicle number: CD 111146, fuel type: diesel, Empty weight: 5.510 kg Lifting capacity: 700 kg Working height: 1.200 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 4.18x2.25x1.71 Iaodpfx Asx U Rfgoh Nsl Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1960, centre distance 1200 mm 550 Iodpox U A Igefx Ah Noal weight of the machine ca. 2,5 t

Condition: used, Year of construction: 2005, operating hours: 3,565 h, machine/vehicle number: CD107902, fuel type: diesel, Empty weight: 4.080 kg Lifting capacity: 450 kg Working height: 1.215 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Iaodox U Rd Nspfx Ah Nol Tyre brand: Solideal Transport dimensions (LxWxH): 3.18x1.78x2.56 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1999, turning diameter 450 mm turning length 380 mm Ijdsvanvnopfx Ah Noal control FANUC